This standard specifies the position, dimensions, and reproducing speed of the nominal 0.200-in (5.08-mm) magnetic audio record on 16-mm motion-picture film.

This standard specifies the size and location of that portion of 35- and 16-mm motion-picture film to be captured by a scanning device for 4:3 and 16:9 aspect ratio.

This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a BH-type perforation and a perforation pitch of either 0.1866 in or 0.1870 in (4.740 mm or 4.750 mm).

This standard specifies an audio frequency test tape to be used for adjusting the sensitivity and frequency response of audio 1 record (program audio track) and audio 2 record (cue track) of quadruplex video magnetic tape recorders operating at a tape speed of 15 in/s (381 mm/s). The tape shall be used on recorders, operating in accordance with ANSI/SMPTE 3. The operating level and frequency response for audio 2 record are specified in SMPTE RP 102.

This standard specifies the position, dimensions, reproducing speed, and identity of the two-, three-, four-, or six-track magnetic audio records on 35-mm magnetic film, and one single-track record on 17.5-mm magnetic film. It also specifies the assignment of records to the various tracks on the magnetic coating on the film in relation to the direction of film travel.

(1.1) Specifications — This standard defines the location within which edge numbers will appear on 16-mm motion-picture film. The maximum interval between successive numbers is also specified. (1.2) Application — This standard applies to latent-image printing of edge numbers as well as to any other method of printing such as inking.

This standard specifies the location and dimensions of the magnetic striping material applied to 16-mm motion-picture film, which is used for both picture and sound.

(1.1) This standard specifies the dimensions of the camera aperture image and its relative position to the reference edge and the perforations of 16-mm motion-picture film. The location of the perforations is based on dimensions given in SMPTE 109. (1.2) This standard also specifies the position of the emulsion and the frame rate for 16-mm motion-picture film perforated one or two edges.

This standard specifies the dimensions required for mechanical and optical interchangeability of lenses for 16-mm and 8-mm motion-picture cameras. For 16-mm cameras with threaded lens mounts, threads having a nominal major diameter of 1 in are often specified. Similarly, for 8-mm motion-picture cameras, threads having a nominal major diameter of 5/8 in are in common use. This standard does not apply to continuous-type motion-picture cameras because of the type of optical system employed in those cameras.

This standard specifies a method for designating the type of winding for rolls of single-row perforated and multiple-row, nonsymmetrically perforated motion-picture raw stock film in terms of the reference edge.