IEC 61747-5-3:2009 applies to commercially available liquid crystal displays (LCDs). This standard applies to all LCD types, including transmissive, reflective or transflective liquid crystal display (LCD) modules using either segment, passive or active matrix and achromatic or colour type LCDs that are equipped with their own integrated source of illumination or without their own source of illumination. The objective of this standard is to establish uniform requirements for accurate and reliable measurements of the following LCD parameters: a) quasistatic strength, b) quasistatic fatigue. The methods described in this standard apply to all sizes, small and large, liquid crystal displays. This publication is to be read in conjunction with \/2. The contents of the corrigendum of November 2011 have been included in this copy.<\/p>\n
| PDF Pages<\/th>\n | PDF Title<\/th>\n<\/tr>\n | ||||||
|---|---|---|---|---|---|---|---|
| 7<\/td>\n | English CONTENTS <\/td>\n<\/tr>\n | ||||||
| 8<\/td>\n | INTRODUCTION <\/td>\n<\/tr>\n | ||||||
| 9<\/td>\n | 1 Scope 2 Normative references 3 Terms and definitions <\/td>\n<\/tr>\n | ||||||
| 10<\/td>\n | 4 Abbreviated terms 5 Apparatus 5.1 General <\/td>\n<\/tr>\n | ||||||
| 11<\/td>\n | 5.2 Method A: Quasistatic biaxial strength 5.3 Method B: Quasistatic edge strength (parent glass) Figures Figure 1 \u2013 Schematic of ROR test fixture for measuring biaxial strength of parent glass <\/td>\n<\/tr>\n | ||||||
| 12<\/td>\n | 5.4 Method C: Quasistatic strength (module) Figure 2 \u2013 Vertical bend test fixture for measuring the edge strength of parent glass <\/td>\n<\/tr>\n | ||||||
| 13<\/td>\n | 5.5 Method D: Fatigue constant 6 Test sample 6.1 General Figure 3 \u2013 Photograph and schematic of strength measurement for full-size LCD module <\/td>\n<\/tr>\n | ||||||
| 14<\/td>\n | 6.2 Parent glass 6.3 Full size module 7 Procedure: Quasistatic loading 8 Stress calculations 8.1 General 8.2 Quasistatic biaxial strength (parent glass) <\/td>\n<\/tr>\n | ||||||
| 15<\/td>\n | 8.3 Quasistatic edge strength (parent glass) 8.4 Quasistatic failure load (LCD module) 9 Fatigue and reliability calculations 9.1 General <\/td>\n<\/tr>\n | ||||||
| 16<\/td>\n | 9.2 Fatigue constant calculation 9.3 Weibull parameter calculation from dynamic failure stress data 9.4 Fatigue constant calculation <\/td>\n<\/tr>\n | ||||||
| 17<\/td>\n | 10 Reporting requirements <\/td>\n<\/tr>\n | ||||||
| 18<\/td>\n | Annex A (informative) Worked test example Figure A.1 \u2013 Weibull plot of biaxial strength of abraded glass with different thicknesses Table A.1 \u2013 Example of strength data before and after abrasion <\/td>\n<\/tr>\n | ||||||
| 19<\/td>\n | Figure A.2 \u2013 Fracture surface of parent glass with 0,089 mm mirror radius Figure A.3 \u2013 Plot of calculated strength versus 1\/square root of mirror radius <\/td>\n<\/tr>\n | ||||||
| 20<\/td>\n | Figure A.4 \u2013 Weibull distribution of the strength of 17\u201d module Table A.2 \u2013 Example of strength data for all modules and low strength modules <\/td>\n<\/tr>\n | ||||||
| 21<\/td>\n | Bibliography <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":" Liquid crystal display devices – Environmental, endurance and mechanical test methods. Glass strength and reliability<\/b><\/p>\n |