{"id":416780,"date":"2024-10-20T06:12:35","date_gmt":"2024-10-20T06:12:35","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/ca-mechanicalcode-2022\/"},"modified":"2024-10-26T11:32:29","modified_gmt":"2024-10-26T11:32:29","slug":"ca-mechanicalcode-2022","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/ca\/ca-mechanicalcode-2022\/","title":{"rendered":"CA MechanicalCode 2022"},"content":{"rendered":"

The CMC provides complete requirements for the installation and maintenance of heating, ventilating, cooling, and refrigeration system, while at the same time allowing latitude for innovations and new technologies. . Key changes to the 2022 CMC include: New guards and rails requirements for installation of equipment and appliances on roofs A2L refrigerants requirements for human comfort and machinery room applications New ventilation requirements for transient and nontransient occupancies New ventilation requirements for indoor air quality for residential occupancies Revisions to the requirements for air ducts, including factory-made air ducts and dampers New provisions for factory-built grease ducts New provisions for refrigeration systems, including pressure-limiting devices and hydrostatic expansion Revisions to the sizing requirements for natural gas and propane piping systems Modifications to the pressure rating requirements for hydronic piping applications New requirements for fuel gas piping appliance shutoff valves, test pressure and overpressure protection devices New tube fastener provisions for radiant heating and cooling New requirements for residential compressed natural gas (CNG) fueling systems New fire-extinguishing equipment and carbon monoxide detection requirements for exhaust systems<\/p>\n

PDF Catalog<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
PDF Pages<\/th>\nPDF Title<\/th>\n<\/tr>\n
2<\/td>\nPreface <\/td>\n<\/tr>\n
4<\/td>\nAcknowledgements <\/td>\n<\/tr>\n
5<\/td>\nCalifornia Code of Regulations Title 24 <\/td>\n<\/tr>\n
7<\/td>\nHow to Distinguish Between Model Code Language and California Amendments <\/td>\n<\/tr>\n
8<\/td>\nCalifornia Matrix Adoption Tables <\/td>\n<\/tr>\n
10<\/td>\nHow to Distinguish Model Code Language from California Amendments <\/td>\n<\/tr>\n
12<\/td>\nForward <\/td>\n<\/tr>\n
14<\/td>\nFormat of the Uniform Mechanical Code <\/td>\n<\/tr>\n
20<\/td>\nCommittee on Uniform Mechanical Code <\/td>\n<\/tr>\n
21<\/td>\nSection Relocation <\/td>\n<\/tr>\n
22<\/td>\nRelated Publications and Services <\/td>\n<\/tr>\n
25<\/td>\nTable of Contents
Chapter 1 \u2014 Division I California Administration
Chapter 1 \u2014 Division II Administration <\/td>\n<\/tr>\n
26<\/td>\nChapter 2 \u2014 Definitions
Chapter 3 \u2014 General Regulations <\/td>\n<\/tr>\n
27<\/td>\nChapter 4 \u2014 Ventilation Air <\/td>\n<\/tr>\n
29<\/td>\nChapter 5 \u2014 Exhaust Systems <\/td>\n<\/tr>\n
31<\/td>\nChapter 6 \u2014 Duct Systems
Chapter 7 \u2014 Combustion Air
Chapter 8 \u2014 Chimneys and Vents <\/td>\n<\/tr>\n
32<\/td>\nChapter 9 \u2014 Installation of Specific Appliances <\/td>\n<\/tr>\n
35<\/td>\nChapter 10 \u2014 Boilers and Pressure Vessels <\/td>\n<\/tr>\n
36<\/td>\nChapter 11 \u2014 Refrigeration <\/td>\n<\/tr>\n
38<\/td>\nChapter 12 \u2014 Hydronics <\/td>\n<\/tr>\n
39<\/td>\nChapter 13 \u2014 Fuel Gas Piping <\/td>\n<\/tr>\n
41<\/td>\nChapter 14 \u2014 Process Piping
Chapter 15 \u2014 Solar Energy Systems
Chapter 16 \u2014 Stationary Power Plants
Chapter 17 \u2014 Referenced Standards <\/td>\n<\/tr>\n
42<\/td>\nAppendices \u2014 Table of Contents
Appendix A \u2014 Residential Plans Examiner Review Form for HVAC System Design
Appendix B \u2014 Procedures to be Followed to Place Gas Equipment in Operation
Appendix C \u2014 Installation and Testing of Oil (Liquid) Fuel-Fired Equipment
Appendix D \u2014 Fuel Supply: Manufactured\/Mobile Home Parks and Recreational Vehicle Parks
Appendix E \u2014 Sustainable Practices
Appendix F \u2014 Geothermal Energy Systems
Appendix G \u2014 Sizing of Venting Systems and Outdoor Combustion and Ventilation Opening Design
Appendix H \u2014 Example Calculation of Outdoor Air Rate
Useful Tables
Index
History Note Appendix <\/td>\n<\/tr>\n
44<\/td>\nChapter 1 Division I \u2014 Administration <\/td>\n<\/tr>\n
46<\/td>\n1.1.0 \u2014 General.
1.1.1 \u2014 Title.
1.1.2 \u2014 Purpose.
1.1.3 \u2014 Scope.
1.1.3.1 \u2014 Nonstate-Regulated Buildings, Structures, and Applications.
1.1.3.2 \u2014 State-Regulated Buildings, Structures, and Applications. <\/td>\n<\/tr>\n
47<\/td>\n1.1.4 \u2014 Appendices.
1.1.5 \u2014 Referenced Codes.
1.1.6 \u2014 NonBuilding Standards, Orders and Regulations.
1.1.7 \u2014 Order of Precedence and Use.
1.1.7.1 \u2014 Differences.
1.1.7.2 \u2014 Specific Provisions.
1.1.7.3 \u2014 Conflicts.
1.1.7.3.1 \u2014 Detached One- and Two-Family Dwellings. <\/td>\n<\/tr>\n
48<\/td>\n1.1.8 \u2014 City, County, or City and County Amendments, Additions or Deletions.
1.1.8.1 \u2014 Findings and Filings.
1.1.8.2 \u2014 California Energy Code Requirements for Locally Adopted Energy Standards.
1.1.9 \u2014 Effective Date of This Code.
1.1.10 \u2014 Availability of Codes.
1.1.11 \u2014 Format.
1.1.12 \u2014 Validity.
1.2.0 \u2014 Building Standards Commission.
1.2.1 \u2014 BSC. <\/td>\n<\/tr>\n
49<\/td>\n1.2.1.1 \u2014 State Building.
1.2.1.2 \u2014 Enforcement.
1.2.1.3 \u2014 Enforcement, Reserved for DGS.
1.2.1.4 \u2014 Adopting Agency Identification.
1.2.2 \u2014 BSC-CG.
1.2.3 \u2014 Alternative Materials, Design, and Methods of Construction and Equipment.
1.2.3.1 \u2014 Research Reports.
1.2.3.2 \u2014 Tests. <\/td>\n<\/tr>\n
50<\/td>\n1.3.0 \u2014 Reserved for Corrections Standards Authority.
1.4.0 \u2014 Department of Consumer Affairs.
1.4.1 \u2014 Specific scope of application of the agency responsiblefor enforcement, the enforcement agency, and the specific authority to adopt and enforce such provisions of this code, unless otherwise stated.
1.4.2 \u2014 Adopting Agency Identification.
1.5.0 \u2014 Reserved for California Energy Commission.
1.6.0 \u2014 Reserved for Department of Food and Agriculture.
1.7.0 \u2014 California Department of Public Health.
1.7.1 \u2014 Specific scope of application of the agency responsible for enforcement, the enforcement agency, and the specific authority to adopt and enforce such provisions of this code, unless otherwise stated.
1.7.2 \u2014 Adopting Agency Identification.
1.8.0 \u2014 Department of Housing and Community Development [HCD].
1.8.1 \u2014 Purpose.
1.8.2 \u2014 Authority and Abbreviations.
1.8.2.1 \u2014 General.
1.8.2.1.1 \u2014 Housing Construction.
1.8.2.1.2 \u2014 Housing Accessibility. <\/td>\n<\/tr>\n
51<\/td>\n1.8.2.1.3 \u2014 Permanent Buildings in Mobilehome Parks and Special Occupancy Parks.
1.8.3 \u2014 Local Enforcing Agency.
1.8.3.1 \u2014 Duties and Powers.
1.8.3.2 \u2014 Laws, Rules, and Regulations.
1.8.3.2.1 \u2014 State Housing Law. <\/td>\n<\/tr>\n
52<\/td>\n1.8.3.2.2 \u2014 Mobilehome Parks Act.
1.8.3.2.3 \u2014 Special Occupancy Parks Act.
1.8.3.2.4 \u2014 Employee Housing Act.
1.8.3.2.5 \u2014 Factory-Built Housing Law.
1.8.4 \u2014 Permits, Fees, Applications, and Inspections.
1.8.4.1 \u2014 Permits.
1.8.4.2 \u2014 Fees.
1.8.4.3 \u2014 Plan Review and Time Limitations.
1.8.4.3.1 \u2014 Retention of Plans.
1.8.4.4 \u2014 Inspections.
1.8.5 \u2014 Right of Entry for Enforcement.
1.8.5.1 \u2014 General. <\/td>\n<\/tr>\n
53<\/td>\n1.8.6 \u2014 Local Modification by Ordinance or Regulation.
1.8.6.1 \u2014 General.
1.8.6.2 \u2014 Findings, Filings, and Rejections of Local Modifications.
1.8.7 \u2014 Alternate Materials, Designs, Tests, and Methods of Construction.
1.8.7.1 \u2014 General.
1.8.7.2 \u2014 Local Building Departments.
1.8.7.2.1 \u2014 Approval of Alternates. <\/td>\n<\/tr>\n
54<\/td>\n1.8.7.3 \u2014 Department of Housing and Community Development.
1.8.8 \u2014 Appeals Board.
1.8.8.1 \u2014 General.
1.8.8.2 \u2014 Definitions.
1.8.8.3 \u2014 Appeals.
1.8.9 \u2014 Unsafe Buildings or Structures.
1.8.9.1 \u2014 Authority to Enforce. <\/td>\n<\/tr>\n
55<\/td>\n1.8.9.2 \u2014 Actions and Proceedings.
1.8.10 \u2014 Other Building Regulations.
1.8.10.1 \u2014 Existing Structures.
1.8.10.2 \u2014 Moved Structures.
1.9.0 \u2014 Division of the State Architect.
1.9.1 \u2014 Reserved for the Division of the State Architect \u2013 Access Compliance.
1.9.2 \u2014 Division of the State Architect \u2013 Structural Safety.
1.9.2.1 \u2014 DSA-SS [Division of the State Architect \u2013 Structural Safety].
1.9.2.1.1 \u2014 Adopting Agency Identification.
1.9.2.2 \u2014 DSA-SS\/CC [Division of the State Architect \u2013Structural Safety\/Community Colleges]. <\/td>\n<\/tr>\n
56<\/td>\n1.9.2.2.1 \u2014 Adopting Agency Identification.
1.10.0 \u2014 Office of Statewide Health Planning and Development.
1.10.1 \u2014 OSHPD 1 and OSHPD 1R.
1.10.1.1 \u2014 Applicable Administrative Standards:
1.10.1.2 \u2014 Applicable Building Standards.
1.10.1.3 \u2014 Adopting Agency Identification.
1.10.2 \u2014 OSHPD 2.
1.10.2.1 \u2014 Applicable Administrative Standards:
1.10.2.2 \u2014 Applicable Building Standards.
1.10.2.3 \u2014 Adopting Agency Identification.
1.10.3 \u2014 OSHPD 3.
1.10.3.1 \u2014 Applicable Administrative Standards.
1.10.3.2 \u2014 Applicable Building Standards.
1.10.3.3 \u2014 Adopting Agency Identification.
1.10.4 \u2014 OSHPD 4. <\/td>\n<\/tr>\n
57<\/td>\n1.10.4.1 \u2014 Applicable Administrative Standards:
1.10.4.2 \u2014 Applicable Building Standards.
1.10.4.3 \u2014 Adopting Agency Identification.
1.10.5 \u2014 OSHPD 5.
1.10.5.1 \u2014 Applicable Administrative Standards.
1.10.5.2 \u2014 Applicable Building Standards.
1.10.5.3 \u2014 Adopting Agency Identification.
1.11.0 \u2014 Office of the State Fire Marshal.
1.11.1 \u2014 SFM \u2013 Office of the State Fire Marshal. <\/td>\n<\/tr>\n
58<\/td>\n1.11.2 \u2014 Duties and Powers of the Enforcing Agency.
1.11.2.1 \u2014 Enforcement.
1.11.2.1.1 \u2014 The responsibility for enforcement of building standards adopted by the State Fire Marshaland published in the California Building Standards Code relating to fire and panic safety and other regulations of the State Fire Marshal shall except asprovided in Section 1.11.2.1.2 be as follows:
1.11.2.1.2 \u2014 Pursuant to Health and Safety Code Section 13108, and except as otherwise provided in this section, building standards adopted by the State Fire Marshal published in the California Building Standards Code relating to fire and panic safety <\/td>\n<\/tr>\n
59<\/td>\n1.11.2.1.3 \u2014 Pursuant to Health and Safety Code Section 13112, any person who violates any order, rule or regulation of the State Fire Marshal is guilty of a misdemeanor punishable by a fine of not less than $100.00 or more than $500.00, or by imprisonment for not less than six months, or by both.
1.11.2.2 \u2014 Right of Entry.
1.11.2.3 \u2014 More Restrictive Fire and Panic Safety Building Standards.
1.11.2.3.1 \u2014 Any fire protection district organized pursuant to Health and Safety Code Part 2.7 (commencing with Section 13800) of Division 12 may adopt building standards relating to fire and panicsafety that are more stringent than those building standards adopted by the State Fire Marshal and contained in the California Building Standards Code.
1.11.2.3.2 \u2014 Any fire protection district that proposes to adopt an ordinance pursuant to this section shall, not less than 30 days prior to noticing a proposed ordinance for public hearing, provide a copy of that ordinance, together with the adopted findings made pursuant to Section 1.11.2.3.1, to the city, county, or city and county where the ordinance will apply.
1.11.2.3.3 \u2014 The fire protection district shall transmit the adopted ordinance to the city, county, or city and county where the ordinance will apply. The legislative body of the city, county, or city and county may ratify, modify or deny an adopted ordinance and transmit its determination to the district within 15 days of the determination. <\/td>\n<\/tr>\n
60<\/td>\n1.11.2.4 \u2014 Request for Alternate Means of Protection.
1.11.2.5 \u2014 Appeals.
1.11.3 \u2014 Construction Documents.
1.11.3.1 \u2014 Public Schools.
1.11.3.2 \u2014 Movable Walls and Partitions.
1.11.3.3 \u2014 New Construction High-Rise Buildings:
1.11.3.4 \u2014 Existing High-Rise Buildings:
1.11.3.5 \u2014 Retention of Plans.
1.11.4 \u2014 Fees.
1.11.4.1 \u2014 Other Fees.
1.11.4.2 \u2014 Large Family Day Care. <\/td>\n<\/tr>\n
61<\/td>\n1.11.4.3 \u2014 High-Rise.
1.11.4.4 \u2014 Fire Clearance Preinspection.
1.11.4.5 \u2014 Care Facilities.
1.11.4.6 \u2014 Requests of the Office of the State Fire Marshal.
1.11.5 \u2014 Inspections.
1.11.5.1 \u2014 Existing Group I-1 or R Occupancies.
1.11.6 \u2014 Certificate of Occupancy.
1.11.7 \u2014 Temporary Structures and Uses.
1.11.8 \u2014 Service Utilities.
1.11.9 \u2014 Stop Work Order
1.11.10 \u2014 Unsafe Buildings, Structures, and Equipment.
1.11.11 \u2014 Adopting Agency Identification.
1.12.0 \u2014 Reserved for the State Librarian.
1.13.0 \u2014 Reserved for the Department of Water Resources.
1.14.0 \u2014 Reserved for the State Lands Commission. <\/td>\n<\/tr>\n
62<\/td>\nChapter 1 Division II \u2014 Administration
101.0 \u2014 General.
101.1 \u2014 Title.
101.2 \u2014 Scope.
101.3 \u2014 Purpose.
101.4 \u2014 Unconstitutional.
101.5 \u2014 Validity.
102.0 \u2014 Applicability.
102.1 \u2014 Conflicts Between Codes.
102.2 \u2014 Existing Installations.
102.3 \u2014 Maintenance.
102.3.1 \u2014 Commercial HVAC Systems.
102.3.2 \u2014 Residential HVAC Systems.
102.4 \u2014 Additions, Alterations, Renovations, or Repairs.
102.5 \u2014 Health and Safety.
102.6 \u2014 Changes in Building Occupancy.
102.7 \u2014 Moved Structures.
102.8 \u2014 Appendices. <\/td>\n<\/tr>\n
63<\/td>\n103.0 \u2014 Duties and Powers of the Authority Having Jurisdiction.
103.1 \u2014 General.
103.2 \u2014 Liability.
103.3 \u2014 Applications and Permits.
103.3.1 \u2014 Licensing.
103.4 \u2014 Right of Entry.
104.0 \u2014 Permits.
104.1 \u2014 Permits Required.
104.2 \u2014 Exempt Work.
104.3 \u2014 Application for Permit. <\/td>\n<\/tr>\n
64<\/td>\n104.3.1 \u2014 Construction Documents.
104.3.2 \u2014 Plan Review Fees.
104.3.3 \u2014 Time Limitation of Application.
104.4 \u2014 Permit Issuance.
104.4.1 \u2014 Approved Plans or Construction Documents.
104.4.2 \u2014 Validity of Permit.
104.4.3 \u2014 Expiration. <\/td>\n<\/tr>\n
65<\/td>\n104.4.3.1 \u2014 Expiration.
104.4.4 \u2014 Extension.
104.4.5 \u2014 Suspension or Revocation.
104.4.6 \u2014 Retention of Plans.
104.5 \u2014 Fees.
104.5.1 \u2014 Work Commencing Before Permit Issuance.
104.5.2 \u2014 Investigation Fees.
104.5.3 \u2014 Fee Refunds.
105.0 \u2014 Inspections and Testing.
105.1 \u2014 General.
105.2 \u2014 Required Inspections.
105.2.1 \u2014 Uncovering. <\/td>\n<\/tr>\n
66<\/td>\n105.2.2 \u2014 Other Inspections.
105.2.3 \u2014 Inspection Requests.
105.2.4 \u2014 Advance Notice.
105.2.5 \u2014 Responsibility.
105.2.6 \u2014 Reinspections.
105.3 \u2014 Testing of Systems.
105.3.1 \u2014 Defective Systems.
105.3.2 \u2014 Retesting.
105.3.3 \u2014 Approval.
105.4 \u2014 Connection to Service Utilities.
106.0 \u2014 Violations and Penalties.
106.1 \u2014 General.
106.2 \u2014 Notices of Correction or Violation. <\/td>\n<\/tr>\n
67<\/td>\n106.3 \u2014 Penalties.
106.4 \u2014 Stop Orders.
106.5 \u2014 Authority to Disconnect Utilities in Emergencies.
106.6 \u2014 Authority to Condemn.
107.0 \u2014 Board of Appeals.
107.1 \u2014 General.
107.2 \u2014 Limitations of Authority. <\/td>\n<\/tr>\n
68<\/td>\nTable
Table 104.5 \u2014 Mechanical Permit Fees <\/td>\n<\/tr>\n
70<\/td>\nChapter 2 \u2014 Definitions <\/td>\n<\/tr>\n
72<\/td>\n201.0 \u2014 General.
201.1 \u2014 Applicability.
202.0 \u2014 Definition of Terms.
202.1 \u2014 General.
203.0 \u2013 A \u2013 <\/td>\n<\/tr>\n
73<\/td>\n204.0 \u2013 B \u2013 <\/td>\n<\/tr>\n
74<\/td>\n205.0 \u2013 C \u2013 <\/td>\n<\/tr>\n
76<\/td>\n206.0 \u2013 D \u2013 <\/td>\n<\/tr>\n
77<\/td>\n207.0 \u2013 E \u2013
208.0 \u2013 F \u2013 <\/td>\n<\/tr>\n
78<\/td>\n209.0 \u2013 G \u2013 <\/td>\n<\/tr>\n
79<\/td>\n210.0 \u2013 H \u2013
211.0 \u2013 I \u2013 <\/td>\n<\/tr>\n
80<\/td>\n212.0 \u2013 J \u2013
213.0 \u2013 K \u2013
214.0 \u2013 L \u2013 <\/td>\n<\/tr>\n
81<\/td>\n215.0 \u2013 M \u2013
216.0 \u2013 N \u2013 <\/td>\n<\/tr>\n
82<\/td>\n217.0 \u2013 O \u2013
218.0 \u2013 P \u2013 <\/td>\n<\/tr>\n
83<\/td>\n219.0 \u2013 Q \u2013
220.0 \u2013 R \u2013 <\/td>\n<\/tr>\n
84<\/td>\n221.0 \u2013 S \u2013 <\/td>\n<\/tr>\n
85<\/td>\n222.0 \u2013 T \u2013
223.0 \u2013 U \u2013
224.0 \u2013 V \u2013 <\/td>\n<\/tr>\n
86<\/td>\n225.0 \u2013 W \u2013
226.0 \u2013 X \u2013
227.0 \u2013 Y \u2013
228.0 \u2013 Z \u2013 <\/td>\n<\/tr>\n
88<\/td>\nChapter 3 \u2014 General Regulations <\/td>\n<\/tr>\n
90<\/td>\n301.0 \u2014 General.
301.1 \u2014 Applicability.
301.2 \u2014 Approval.
301.3 \u2014 Design of Equipment.
301.4 \u2014 Electrical Connections.
301.5 \u2014 Oil-Burning Appliances.
301.6 \u2014 Personnel Protection.
301.7 \u2014 OSHPD 1R [OSHPD 1R].
302.0 \u2014 Materials – Standards and Alternates.
302.1 \u2014 Minimum Standards.
302.1.1 \u2014 Marking.
302.1.2 \u2014 Standards.
302.1.3 \u2014 Existing Buildings.
302.2 \u2014 Alternate Materials and Methods of Construction Equivalency. <\/td>\n<\/tr>\n
91<\/td>\n302.2.1 \u2014 Testing.
302.2.1.1 \u2014 Tests.
302.2.1.2 \u2014 Request by the Authority Having Jurisdiction.
302.3 \u2014 Alternative Engineered Design.
302.3.1 \u2014 Permit Application.
302.3.2 \u2014 Technical Data.
302.3.3 \u2014 Design Documents.
302.3.4 \u2014 Design Approval.
302.3.5 \u2014 Design Review.
302.3.6 \u2014 Inspection and Testing.
303.0 \u2014 Installation.
303.1 \u2014 Listed Appliances.
303.2 \u2014 Closet or Alcove Installations. [Not adopted for OSHPD 1, 1R, 2, 3, 4 & 5]
303.3 \u2014 Unlisted Appliances.
303.4 \u2014 Anchorage of Appliances. <\/td>\n<\/tr>\n
92<\/td>\n303.5 \u2014 Movement.
303.6 \u2014 Identification of Equipment.
303.7 \u2014 Liquefied Petroleum Gas Facilities.
303.7.1 \u2014 Liquefied Petroleum Gas [LP-Gas] Appliances. [HCD 1 & HCD 2]
303.8 \u2014 Appliances on Roofs.
303.8.1 \u2014 Load Capacity.
303.8.2 \u2014 Fasteners.
303.8.3 \u2014 Installation of Appliances on Roofs.
303.8.4 \u2014 Edge of Roof Clearance.
303.8.4.1 \u2014 Guards and Rails.
303.8.5 \u2014 Electrical Power.
303.8.6 \u2014 Platform or Walkway.
303.9 \u2014 Avoiding Strain on Gas Piping.
303.10 \u2014 Clearances.
303.10.1 \u2014 Clearance Reduction.
303.10.1.1 \u2014 Type I Hood Exhaust System.
303.10.1.2 \u2014 Product Conveying Ducts. <\/td>\n<\/tr>\n
93<\/td>\n303.10.1.3 \u2014 Solid-Fuel Burning Appliances.
303.11 \u2014 Installation in Commercial Garages.
303.11.1 \u2014 Repair Garages.
303.12 \u2014 Installation in Aircraft Hangars.
304.0 \u2014 Accessibility for Service.
304.1 \u2014 General.
304.2 \u2014 Sloped Roof.
304.3 \u2014 Access to Appliances on Roofs.
304.3.1 \u2014 Access.
304.3.1.1 \u2014 Access Type.
304.3.1.2 \u2014 Permanent Ladders.
304.3.2 \u2014 Permanent Lighting.
304.4 \u2014 Appliances in Attics and Under-Floor Spaces.
304.4.1 \u2014 Length of Passageway.
304.4.2 \u2014 Width of Passageway.
304.4.3 \u2014 Work Platform.
304.4.4 \u2014 Lighting and Convenience Outlet. <\/td>\n<\/tr>\n
94<\/td>\n305.0 \u2014 Location.
305.1 \u2014 Installation in Residential Garages.
305.1.1 \u2014 Physical Damage.
305.1.2 \u2014 Access from the Outside.
305.1.3 \u2014 Cellulose Nitrate Plastic Storage.
305.2 \u2014 Pit Location.
305.3 \u2014 Flood Hazard Areas.
305.3.1 \u2014 Coastal High Hazard Areas.
305.3.2 \u2014 Air Exhaust and Intake Openings.
305.4 \u2014 Elevator Shaft.
305.5 \u2014 Drainage Pan.
306.0 \u2014 Automatic Control Devices.
306.1 \u2014 General.
306.2 \u2014 Building Automation Systems. [OSHPD 1] <\/td>\n<\/tr>\n
95<\/td>\n307.0 \u2014 Labeling.
307.1 \u2014 Fuel-Burning Appliances.
307.2 \u2014 Electric Heating Appliances.
307.3 \u2014 Heat Pump and Electric Cooling Appliances.
307.4 \u2014 Absorption Units.
308.0 \u2014 Improper Location.
308.1 \u2014 General.
309.0 \u2014 Workmanship.
309.1 \u2014 Engineering Practices.
309.2 \u2014 Concealing Imperfections.
309.3 \u2014 Installation Practices.
310.0 \u2014 Condensate Wastes and Control.
310.1 \u2014 Condensate Disposal. <\/td>\n<\/tr>\n
96<\/td>\n310.1.1 \u2014 Condensate Pumps.
310.2 \u2014 Condensate Control.
310.2.1 \u2014 Protection of Appurtenances.
310.3 \u2014 Condensate Waste Pipe Material and Sizing.
310.3.1 \u2014 Cleanouts.
310.4 \u2014 Appliance Condensate Drains.
310.5 \u2014 Point of Discharge.
310.6 \u2014 Condensate Waste From Air-Conditioning Coils.
310.7 \u2014 Plastic Fittings.
311.0 \u2014 Heating or Cooling Air System.
311.1 \u2014 Source.
Tables
Table 310.3 \u2014 Minimum Condensate Pipe Size <\/td>\n<\/tr>\n
97<\/td>\n311.2 \u2014 Air Filters.
311.3 \u2014 Prohibited Source.
311.4 \u2014 Return-Air Limitations.
311.5 \u2014 California Energy Code Requirements for Residential Air Filtration.
312.0 \u2014 Plumbing Connections.
312.1 \u2014 General.
313.0 \u2014 Hangers and Supports.
313.1 \u2014 General.
313.2 \u2014 Material.
313.3 \u2014 Suspended Piping.
313.4 \u2014 Alignment.
313.5 \u2014 Underground Installation.
313.6 \u2014 Hanger Rod Sizes.
313.7 \u2014 Gas Piping.
Table 313.6 \u2014 Hanger Rod Sizes <\/td>\n<\/tr>\n
98<\/td>\n314.0 \u2014 Balancing.
314.1 \u2014 General.
315.0 \u2014 Louvers in Hurricane Prone Regions.
315.1 \u2014 General.
315.1.1 \u2014 Testing.
315.1.2 \u2014 Impact Resistance Test.
316.0 \u2014 Protection of Piping, Tubing, Materials, and Structures.
316.1 \u2014 General.
316.2 \u2014 Installation.
316.3 \u2014 Corrosion, Erosion, and Mechanical Damage.
316.4 \u2014 Protectively Coated Pipe.
316.5 \u2014 Fire-Resistant Construction.
316.6 \u2014 Steel Nail Plates.
316.7 \u2014 Sleeves.
316.7.1 \u2014 Building Loads.
316.7.2 \u2014 Exterior Walls.
316.8 \u2014 Firewalls.
316.9 \u2014 Structural Members.
316.10 \u2014 Rodentproofing.
316.11 \u2014 Metal Collars.
317.0 \u2014 Trenching, Excavation, and Backfill.
317.1 \u2014 Trenches.
317.2 \u2014 Tunneling and Driving. <\/td>\n<\/tr>\n
99<\/td>\n317.3 \u2014 Open Trenches.
317.4 \u2014 Excavations.
318.0 \u2014 Scope.
318.1 \u2014 Applicability.
318.2 \u2014 Services\/Systems and Utilities.
319.0 \u2014 Steam and Hot-Water Systems.
319.1 \u2014 Requirements for Hospitals and Optional Services Provided in Correctional Treatment Centers. [OSHPD 1, 1R, 4 & 5]
319.1.1 \u2014 Boilers shall have the capacity, based upon the rest ratings published by the Hydronics Institute or an other acceptable national standard to supply the normal operating requirements of all connected systems and equipment.
319.1.2 \u2014 A minimum of two boilers shall be provided. The arrangement of boilers shall be based on the capacity and capability of a boiler or boilers to operate all systems during-periods of breakdown or maintenance of anyone boiler.
319.1.3 \u2014 Boiler systems providing space heating shall be designed to maintain a minimum temperature of 60\u00b0F (15.6\u00b0C) in general patient areas and the temperatures specified in Table 4-A for sensitive areas during periods of breakdown or maintenance of any one boiler.
319.1.4 \u2014 Boiler feed pumps, condensate return pumps, fuel oil pumps, and heating circulating pumps shall be connected and installed to provide stand by service in the event of pump failure. Installation of duplex pumps or provision of a spare pump will meet this requirement.
319.1.5 \u2014 At least two sources of heat (e.g. two pieces of equipment) shall be provided for supplying essential services such as sterilizers, hot water for dishwashing, and domestic hot water for minimum patient service, such as handwashing and baths. Booster heaters for dishwashing providing 125\u00b0F to 180\u00b0F (52\u00b0C to 82\u00b0C) water may be counted as the second source of heat for that service.
319.2 \u2014 Requirements for Skilled Nursing, Intermediate Care Facilities and Basic Services Provided in Correctional Treatment Centers. [OSHPD 2 & 4]
319.2.1 \u2014 Boilers, if provided, shall accommodate Section 319.1.
319.2.2 \u2014 Two or more interconnected water heaters are an acceptable means to provide two sources of heat for hot water (See Section 319.1.5).
320.0 \u2014 Air Conditioning and Heating Systems.
320.1 \u2014 Requirements for Hospitals and Optional Services Provided in Correctional Treatment Centers. [OSHPD 1, 1R, 4 & 5]
320.1.1 \u2014 The systems shall be designed to provide the temperatures and relative humidity for sensitive areas or rooms shown in Table 4-A.
320.1.2 \u2014 Heating systems shall be designed based on the\u201cHeating DB 99.6%\u201d column of the Climatic Design Data in ASHRAE Handbook-Fundamentals. The systems shall be thermostatically controlled with appropriate zoning to achieve the above conditions.
320.1.3 \u2014 Cooling systems shall be designed based on the 0.4% columns of the four Annual Design Conditionstitled Cooling, Evaporation, Dehumidification, and Enthalpy shown by the Climate Design Data in ASHRAE Handbook-Fundamentals.
320.2 \u2014Requirements for Skilled Nursing, Intermediate Care Facilities and Basic Services Provided in Correctional Treatment Centers. [OSHPD 2 & 4]
320.2.1 \u2014 Systems shall accommodate the provisions of Sections 320.1.2 through 320.1.3. <\/td>\n<\/tr>\n
100<\/td>\n320.2.2 \u2014 Where air conditioning is provided, the system shall be thermostatically controlled in one or more zones.
320.3 \u2014 Requirements for Outpatient Facilities and Licensed Clinics. [OSHPD 3]
320.3.1 \u2014 The system shall be designed to provide the temperature and humidities for sensitive areas for rooms shown in Table 4-A.
320.4 \u2014 Telephone and Technology Equipment Centers. [OSHPD 1 & 4]
320.4.1 \u2014 Power for HVAC systems serving the room(s) shall be supplied by the Equipment Branch pursuant to the California Electrical Code.
320.4.2 \u2014 Mechanical equipment or fixtures that are not directly related to the support of the room shall not be installed in or pass through the room.
320.4.3 \u2014 HVAC systems shall be provided to maintain environmental conditions recommended in ASHRAE\u2019s Thermal Guidelines for Data Processing Environment and the requirements of the specific equipment installed.
320.4.4 \u2014 Technology equipment centers shall have redundant cooling systems each of sufficient capacity to provide required cooling during periods of breakdown or maintenance of either system.
320.5 \u2014 Psychiatric Services. [OSHPD 1, 1R, 2, 4 & 5]
321.0 \u2014 Essential Mechanical Provisions. [OSHPD 1, 1R, 2, 3 (Surgical Clinics only) 4 & 5]
321.1 \u2014 (Does not apply to OSHPD 3 surgical clinic.) All heating equipment and fans necessary to maintain a minimum temperature of 60\u00b0F (15.6\u00b0) in patient areas which are not specified in Section 322.0.
321.2 \u2014 All heating equipment and fans necessary to maintain the minimum temperatures listed in Table 4-A for sensitive areas specified in Section 322.0.
321.3 \u2014 Equipment necessary for humidification of the area slisted in Section 322.0.
321.4 \u2014 All supply, return, and exhaust fans required to maintain the positive and negative air balances as required in Table 4-A.
321.5 \u2014 All control components and control systems necessary for the normal operation of equipment required to have essential electrical power.
321.6 \u2014 Alarms for airborne infection isolation rooms and protective environment rooms.
322.0 \u2014 Sensitive Areas or Rooms. [OSHPD 1, 1R, 2, 3 (Surgical Clinics) 4 & 5]
322.1 \u2014 The following conditions shall be met for sensitive areas or rooms:
323.0 \u2014 Mechanical Equipment Schedules. [OSHPD 1, 1R, 2, 4 & 5] <\/td>\n<\/tr>\n
101<\/td>\nTable 303.10.1 \u2014 Reduction of Clearances With Specified Forms of Protection [NFPA 54: Table 10.2.3] <\/td>\n<\/tr>\n
102<\/td>\nFigures
Figure 303.10.1(1) \u2014 Extent of Protection Necessary to Reduce Clearances From Gas Appliances or Vent Connectors [NFPA 54: FIGURE 10.3.2.3(a)]
Figure 303.10.1(2) \u2014 Wall Protector Clearance Reduction System [NFPA 54: Figure 10.3.2.3(b)]
Figure 303.10.1(3) \u2014 Masonry Clearance Reduction System [NFPA 54: Figure 10.3.2.3(c)] <\/td>\n<\/tr>\n
103<\/td>\nTable 313.3 \u2014 Hangers and Supports <\/td>\n<\/tr>\n
104<\/td>\nChapter 4 \u2014 Ventilation Air <\/td>\n<\/tr>\n
106<\/td>\n401.0 \u2014 General.
401.1 \u2014 Applicability.
401.2 \u2014 Filters. [BSC-CG], [DSA-SS & DSA-SS\/CC]
401.2.1 \u2014 Labeling.
402.0 \u2014 Ventilation Air.
402.1 \u2014 Occupiable Spaces.
402.1.1 \u2014 Construction Documents.
402.1.2 \u2014 Ventilation in Health Care Facilities.
402.2 \u2014 Natural Ventilation. [Not permitted for OSHPD 1, 2, 3, 4 & 5]
402.2.1 \u2014 Floor Area to be Ventilated. <\/td>\n<\/tr>\n
107<\/td>\n402.2.1.1 \u2014 Single Side Opening.
402.2.1.2 \u2014 Double Side Opening.
402.2.1.3 \u2014 Corner Openings.
402.2.1.4 \u2014 Ceiling Height.
402.2.2 \u2014 Location and Size of Openings.
402.2.3 \u2014 Control and Accessibility.
402.3 \u2014 Mechanical Ventilation. [Not permitted for OSHPD 1, 2, 3, 4 & 5]
402.4 \u2014 Outdoor Air Intake Protection.
402.4.1 \u2014 Weather Protections.
403.0 \u2014 Ventilation Rates. [Not permitted for OSHPD 1, 2, 3, 4 & 5 spaces listed in Table 4-A]
403.1 \u2014 General.
403.2 \u2014 Zone Calculations.
403.2.1 \u2014 Breathing Zone Outdoor Airflow.
403.2.2 \u2014 Zone Air Distribution Effectiveness.
403.2.3 \u2014 Zone Outdoor Airflow. <\/td>\n<\/tr>\n
108<\/td>\n403.3 \u2014 Single-Zone Systems.
403.4 \u2014 One Hundred Percent Outdoor Air Systems.
403.5 \u2014 Multiple-Zone Recirculating Systems.
403.5.1 \u2014 Uncorrected Outdoor Air Intake.
403.5.1.1 \u2014 Occupant Diversity.
403.5.1.2 \u2014 System Ventilation Efficiency.
403.5.1.3 \u2014 Simplified Procedure for System Ventilation Efficiency.
403.5.1.4 \u2014 Zone Minimum Primary Airflow.
403.5.2 \u2014 Outdoor Air Intake.
403.6 \u2014 Design for Varying Operating Conditions.
403.6.1 \u2014 Short-Term Conditions. <\/td>\n<\/tr>\n
109<\/td>\n403.7 \u2014 Exhaust Ventilation.
403.7.1 \u2014 Parking Garages.
403.7.2 \u2014 Enclosed Parking Garages.
403.7.2.1 \u2014 Alternative Exhaust Ventilation for Enclosed Parking Garages.
403.7.2.2 \u2014 Minimum Exhaust Rate. [HCD 1 &2]
403.7.2.3 \u2014 Exhaust Inlet Distribution. [HCD 1& 2]
403.7.2.4 \u2014 Exhaust System Operation. [HCD 1& 2]
403.8 \u2014 Dynamic Reset.
403.9 \u2014 Air Classification and Recirculation.
403.9.1 \u2014 Class 1 Air.
403.9.2 \u2014 Class 2 Air.
403.9.3 \u2014 Class 3 Air.
403.9.4 \u2014 Class 4 Air. <\/td>\n<\/tr>\n
110<\/td>\n404.0 \u2014 Alternative Procedure for Multiple-Zone Systems Ventilation Efficiency.
404.1 \u2014 General.
404.2 \u2014 Average Outdoor Air Fraction.
404.3 \u2014 Zone Ventilation Efficiency.
404.3.1 \u2014 Single Supply Systems.
404.3.2 \u2014 Secondary-Recirculation Systems. <\/td>\n<\/tr>\n
111<\/td>\n405.0 \u2014 Indoor Air Quality for Residential Occupancies.
405.1 \u2014 General.
405.1.1 \u2014 Natural Ventilation.
405.2 \u2014 Ventilation Air Rate.
405.2.1 Reduced Ventilation Air Rate.
405.3 Bathroom Exhaust.
405.3.1 Exhaust Rate.
405.4 Kitchen Exhaust.
405.4.1 \u2014 Exhaust Rate.
405.5 \u2014 Ventilation Openings.
406.0 \u2014 Evaporative Cooling System for Health Care Facilities. [For OSHPD 1, 1R, 2, 3, 4 & 5]
407.0 \u2014 Ventilation System Details. [OSHPD 1, 1R, 2, 3, 4 & 5]
407.1 \u2014 General.
407.1.1 \u2014 All supply-air, return air, and exhaust-air systems shall be mechanically operated and such systems for areas listed in Table 4-A shall be operated continuously. <\/td>\n<\/tr>\n
112<\/td>\n407.1.2 \u2014 Fans serving exhaust systems shall be located at the discharge end of the system.
407.1.3 \u2014 Services\/Systems and Utilities.
407.2 \u2014 Outdoor Air Intakes and Exhaust Outlets.
407.2.1 \u2014 Outdoor Air Intakes. Outdoor
407.2.2 \u2014 Exhaust Outlets.
407.3 \u2014 Air Balance.
407.3.1 \u2014 The ventilation systems shall be designed and balanced to provide the general air balance relationship to adjacent areas, shown in Table 4-A.
407.4 \u2014 Air Circulation.
407.4.1 \u2014 Design of the ventilation system shall provide air movement that is generally from clean to less clean areas.
407.4.1.1 \u2014 Air supplied to operating rooms, cesarean operating rooms, cardiac catheterization labs, cystoscopy rooms, delivery rooms, and nurseries shall be delivered at or near the ceiling of the area served.
407.4.1.2 \u2014 Room supply air outlets and room recirculation and exhaust air inlets installed in nonsensitive areas shall be located not less than 3 inches (76 mm) above the floor.
407.4.1.3 \u2014 Corridors shall not be used to convey supply, return, transfer or exhaust air to or from any room if the corridor is required to be fire resistive construction per the California Building Code.
407.4.1.4 \u2014 No space above a ceiling may be utilized as an outside-air, relief-air, supply-air, exhaust-air, or return-air plenum.
407.4.1.5 \u2014 Air from a patient room, exam room, treatment room shall not be transferred to another similar room without first having passed through air filters as required by Table 4-B or Table 4-C. <\/td>\n<\/tr>\n
113<\/td>\n407.4.1.6 \u2014 Supply outlets and return and exhaust air inlets shall be located to prevent short-circuiting.
407.4.1.7 \u2014 Recirculating Room Units.
407.5 \u2014 Variable Air Volume.
407.5.1 \u2014 Variable Air Volume Systems (VAV).
407.5.1.1 \u2014 The VAV system shall comply with code requirements for outside air, total air, and pressure relationship through the full range of operation from minimum to maximum.
407.5.1.2 \u2014 The central return or exhaust fan shall be controlled to accomplish the variable air volume requirements of the individual rooms served by the fan as described in Section 407.5.1.3.
407.5.1.3 \u2014 Spaces with pressure requirements per Table 4-A shall utilize an automatic modulating damper in the return or exhaust air for each space.
407.6 \u2014 Economizers.
408.0 \u2014 Filters. [OSHPD 1, 1R, 2, 3, 4 & 5]
408.1 \u2014 General.
408.1.1 \u2014 A filter gauge shall be installed across each filter bank serving central air systems.
408.1.2 \u2014 Central air-handling systems are defined as any unit requiring duct work on the supply or inlet side that serve more than one room.
408.1.3 \u2014 Filter banks shall be visually inspected for torn media and bypass in filter frames by means of a flashlight or equivalent, both with fans in operation and stopped.
408.1.4 \u2014 Central air-handling systems shall be maintained in a reasonably clean condition during construction and shall be cleaned as necessary prior to replacement of temporary filter used during construction to ensure that cleanair will be delivered to the occupied spaces.
408.1.5 \u2014 Filter bank No. 1 shall be located upstream of the air-conditioning equipment.
408.1.6 \u2014 Filter bank No. 2 and filter bank No. 3 media shall be rigid or supported (noncollapsing type) and shall operate on the principles of impingement, straining, and diffusion.
408.2 \u2014 Filters for Hospitals.
408.2.1 \u2014 All air-ventilation systems shall comply with code requirements of this section and shall have filter bank efficiencies as listed in Table 4-B.
408.2.2 \u2014 Noncentral recirculating air systems providing cooling to high heat producing equipment located in nonsensitive areas shall have a filter with minimum efficiency reporting value (MERV) of 6 based on ASHRAE 52.2.
408.2.3 \u2014 Noncentral air systems serving any areas not listed in Table 4-B shall have a filter with minimum efficiency reporting value (MERV) of 6 based on ASHRAE 52.2.
408.2.4 \u2014 Noncentral recirculating air handling systems, for example, through-the-wall units, fan coil units, and heat pumps may be utilized for single patient rooms of one or more beds.
408.3 \u2014 Filters for Skilled Nursing Facilities, Intermediate Care Facilities, and Correctional Treatment Centers.
408.3.1 \u2014 The air ventilation systems shall comply with code requirements of this section for skilled nursing facilities, intermediate care facilities and correctional treatment centers and shall have filter bank efficiencies as listed in Table 4-C. <\/td>\n<\/tr>\n
114<\/td>\n408.3.2 \u2014 Noncentral air systems serving single patient rooms of one or more beds shall comply with Table 4-C.
408.3.3 \u2014 Noncentral recirculating air-handling systems, i.e. through the wall units, may be utilized for each patient room with one or more beds.
408.3.4 \u2014 Airborne infection isolation rooms, protective environment rooms, and sensitive areas in correctional treatment centers shall comply with Section 408.2.
408.4 \u2014 Filters for Outpatient Facilities.
408.4.1 \u2014 The air ventilation systems shall comply with code requirements of this section for outpatient facilities and shall have filter bank efficiencies as listed in Table4-B.
408.4.2 \u2014 Noncentral air systems serving individual rooms shall comply with Table 4-B.
409.0 \u2014 Ducts. [OSHPD 1, 1R, 2, 3, 4 & 5]
409.1 \u2014 Ducts which penetrate construction, intended for Xray or other radiation protection, shall not impair the effectiveness of the protection.
409.2 \u2014 Duct linings and their use shall meet the requirements of Chapter 6, California Mechanical Code.
409.3 \u2014 Insulation of Ducts.
409.4 \u2014 The anchorage and supporting structural elements for airducts shall be designed to with stand the lateral forces as required by the California Building Code, Title 24, Part 2.
410.0 \u2014 Laboratory Ventilating Systems and Hoods. [OSHPD 1, 1R, 2, 3, 4 & 5]
410.1 \u2014 Laboratory Ventilating Systems.
410.2 \u2014 Exhaust Hoods and Safety Cabinets.
410.3 \u2014 Laboratory Fume Hoods.
410.3.1 \u2014 General Standard.
410.3.2 \u2014 Special Standards for Use with Strong Oxidants.
410.3.3 \u2014 Special Standards for Use with Infectious or Radioactive Materials.
411.0 \u2014 Kitchen and Dining Areas. [OSHPD 1, 2, 3, 4 & 5]
411.1 \u2014 The air from dining areas may be used to ventilate the food preparation areas only after it has passed through a filter with at least an 80 percent average efficiency based on ASHRAE 52.2 or a minimum efficiency reporting value (MERV) of 13, based on ASHRAE 52.2.
412.0 \u2014 Boiler, Mechanical, and Electrical Rooms. [OSHPD 1, 2, 3, 4 & 5]
412.1 \u2014 Boiler, heater and electrical equipment rooms shall be provided with outdoor air so as to maintain combustion rates of equipment and temperatures in the rooms and in adjoining areas as rated in this chapter.
412.2 \u2014 Floor surfaces in occupied spaces above such rooms should not exceed a temperature of 85\u00b0F (29.4\u00b0C), and suitable insulation may be required. <\/td>\n<\/tr>\n
115<\/td>\n413.0 \u2014 Odorous Rooms. [OSHPD 1, 2, 3, 4 & 5]
413.1 \u2014 Rooms in areas where excessive heat or moisture is generated, where objectional odors or dust are present, or where flammable or toxic gases may accumulate, which are used by health facility personnel or patients, shall be provided with exhaust ventilation to change the air a minimum often times per hour.
413.2 \u2014 Kitchen, morgues and laundries located inside a hospital building or skilled nursing facility in which patients area ccommodated, or treated, shall be ventilated with exhaust systems which will provide a minimum of ten air changes per hour and prevent odors from entering patient areas.
414.0 \u2014 Airborne Infection Isolation Rooms. [OSHPD 1, 2, 3, 4 & 5]
414.1 \u2014 Exhaust Systems.
414.1.1 \u2014 Exhaust discharge from fan shall extend at least 7 feet (2134 mm) above the roof and discharge vertically upward. Self-draining stacks or equivalent shall be used for rain protection.
414.1.2 \u2014 Exhaust shall discharge above roof level and through an accessible HEPA filter. The HEPA filter shall be located upstream of the exhaust fan and have a minimum efficiency of 99.97 percent based on the DOP method in accordance with Mil-Std. 282 or a minimum efficiency reporting value (MERV) of 17, based on ASHRAE 52.2.
414.2 \u2014 Air Distribution.
415.0 \u2014 Protective Environment Rooms. [OSHPD 1, 2, 3, 4 & 5]
415.1 \u2014 Air Distribution.
416.0 \u2014 Alarms \u2013 Airborne Infection Isolation Rooms and Protective Environment Rooms. [OSHPD 1, 2, 3, 4 & 5]
416.1 \u2014 An alarm system which is based on static pressure control, volumetric control, or directional flow measurement shall be provided for each isolation room.
416.2 \u2014 Other acceptable alarm systems will be allowed when designs are specifically approved by the enforcing agency.
416.3 \u2014 [For OSHPD 4] For correctional treatment centers, the alarm system shall not create false alarms or security hazards.
416.4 \u2014 Prior to acceptance of the rooms, the alarm system shall be tested and operated to demonstrate to the owner or designated representative that the installation and performance of the system conforms to design intent. <\/td>\n<\/tr>\n
116<\/td>\n417.0 \u2014 Testing and Balancing Airborne Infection Isolation Rooms and Protective Environment Rooms. [OSHPD 1, 2, 3, 4 & 5]
418.0 \u2014 Design Requirements for Ethylene Oxide (ETO) Sterilization Areas. [OSHPD 1, 1R, 2, 3, 4 & 5]
418.1 \u2014 Air Changes.
418.2 \u2014 Exhaust Requirements.
418.2.1 \u2014 All air from the ETO sterilizer equipment room shall be exhausted to the outside by a dedicated system or other approved method.
418.2.2 \u2014 The exhaust fan for the dedicated system shall be located at the discharge point of the system and identified as ETO Equipment Room Exhaust.
418.2.3 \u2014 Discharge Point.
418.3 \u2014 Ventilation Requirements.
418.3.1 \u2014 Aeration Units.
418.3.2 \u2014 Capture Box.
418.3.3 \u2014 Cylinder Change.
418.3.4 \u2014 Sterilizer Relief Valve.
418.3.5 \u2014 Ventilation of Sterilizer Door Area.
418.4 \u2014 Gas Valves.
418.5 \u2014 Alarm Systems.
419.0 \u2014 Neonatal Intensive Care Units. [OSHPD 1]
419.1 \u2014 Formula Preparation Area.
419.2 \u2014 Treatment Area\/Room.
420.0 \u2014 Air Distribution Devices. [OSHPD 1, 2, 3, 4 & 5] <\/td>\n<\/tr>\n
117<\/td>\nTables
Table 4-A \u2014 Pressure Relationship and Ventilation Requirements For General Acute Care Hospitals, Skilled Nursing Facilities, Intermediate Care Facilities, Correctional Treatment Centers, Outpatient Facilities, and Licensed Clinics <\/td>\n<\/tr>\n
122<\/td>\nTable 4-B \u2014 Filter Efficiencies for Central Ventilation and Air-Conditioning Systems in General Acute Care Hospitals, Acute Psychiatric Hospitals, Outpatient Facilities, and Licensed Clinics
Table 4-C \u2014 Filter Efficiencies for Central Ventilation and Air-Conditioning Systems in Skilled Nursing Facilities and Intermediate Care Facilities and Correctional Treatment Centers <\/td>\n<\/tr>\n
123<\/td>\nTable 402.1 \u2014 Minimum Ventilation Rates in Breathing Zone [ASHRAE 62.1: Table 6.2.2.1] <\/td>\n<\/tr>\n
125<\/td>\nTable 403.2.2 \u2014 Zone Air Distribution Effectiveness [ASHRAE 62.1: Table 6.2.2.2] <\/td>\n<\/tr>\n
126<\/td>\nTable 403.7 \u2014 Minimum Exhaust Rates [ASHRAE 62.1: Table 6.5] <\/td>\n<\/tr>\n
128<\/td>\nChapter 5 \u2014 Exhaust Systems <\/td>\n<\/tr>\n
130<\/td>\n501.0 \u2014 General.
501.1 \u2014 Applicability
502.0 \u2014 Termination.
502.1 \u2014 Exhaust Opening Protection.
502.2 \u2014 Termination of Exhaust Ducts.
502.2.1 \u2014 Environmental Air Ducts.
502.2.2 \u2014 Product Conveying Ducts.
502.2.3 \u2014 Commercial Kitchen Ducts.
Part I \u2013 Environmental Air Ducts and Product-Conveying Systems.
503.0 \u2014 Motors, Fans, and Filters.
503.1 \u2014 General.
503.2 \u2014 Fans.
504.0 \u2014 Environmental Air Ducts.
504.1 \u2014 General.
504.1.1 \u2014 Backdraft Protection. <\/td>\n<\/tr>\n
131<\/td>\n504.2 \u2014 Independent Exhaust Systems.
504.3 \u2014 Domestic Range.
504.4 \u2014 Clothes Dryers.
504.4.1 \u2014 Provisions for Makeup Air.
504.4.2 \u2014 Domestic Clothes Dryers.
504.4.2.1 \u2014 Length Limitation.
504.4.2.2 \u2014 Transition Ducts.
504.4.2.3 \u2014 Exhaust Duct Power Ventilators.
504.4.3 \u2014 Commercial Clothes Dryers.
504.4.3.1 \u2014 Exhaust Ducts for Type 2 Clothes Dryers. <\/td>\n<\/tr>\n
132<\/td>\n504.4.4 \u2014 Common Exhaust.
504.4.5 \u2014 Duct Supports.
504.5 \u2014 Heat (Energy) Recovery Ventilators.
504.6 \u2014 Gypsum Wallboard Ducts.
505.0 \u2014 Product-Conveying Systems.
505.1 \u2014 General.
505.1.1 \u2014 Mechanical Ventilation.
505.2 \u2014 Incompatible Materials.
505.3 \u2014 Flammability Limit.
505.3.1 \u2014 Higher Concentrations.
505.3.2 \u2014 Ovens and Furnaces.
505.3.3 \u2014 Deflagration.
505.4 \u2014 Air-Moving Devices.
505.5 \u2014 Generating Flames, Sparks, or Hot Materials.
505.6 \u2014 Fire Dampers. <\/td>\n<\/tr>\n
133<\/td>\n505.6.1 \u2014 Prohibited.
505.7 \u2014 Fire Detection and Alarm Systems.
505.7.1 \u2014 Automatic Extinguishing System.
505.7.2 \u2014 Shut Down Permitted.
505.8 \u2014 Product-Conveying Ducts Classification.
505.9 \u2014 Minimum Velocities and Circulation.
505.10 \u2014 Makeup Air.
505.11 \u2014 Hoods and Enclosures.
Tables
Table 505.9 \u2014 Range of Minimum Duct Design Velocities <\/td>\n<\/tr>\n
134<\/td>\n505.12 \u2014 Pharmacies \u2013 Compounding Area of Parenteral Solutions. [CA \u2013 Board of Pharmacy]
505.12.1 \u2014 Pharmacies \u2013 Laminar Flow Biological Safety Cabinet. [CA \u2013 Board of Pharmacy]
506.0 \u2014 Product-Conveying Ducts.
506.1 \u2014 Materials.
506.2 \u2014 Construction.
506.3 \u2014 Penetrations.
506.3.1 \u2014 Fire Barriers. <\/td>\n<\/tr>\n
135<\/td>\nTable 506.2(1) \u2014 Minimum Sheet Metal Thickness for Round Ducts <\/td>\n<\/tr>\n
136<\/td>\n506.3.2 \u2014 Protection.
506.4 \u2014 Condensate.
506.4.1 \u2014 Drainage.
506.5 \u2014 Fittings.
506.6 \u2014 Explosion Venting. <\/td>\n<\/tr>\n
137<\/td>\n506.7 \u2014 Supports.
506.8 \u2014 Fire Protection.
506.8.1 \u2014 Loads.
506.8.2 \u2014 Corrosion.
Table 506.2(2) \u2014 Minimum Sheet Metal Thickness for Rectangular Ducts <\/td>\n<\/tr>\n
138<\/td>\n506.8.3 \u2014 Vibration and Stress.
506.8.4 \u2014 Expansion and Contraction.
506.9 \u2014 Protection from Physical Damage.
506.10 \u2014 Duct Clearances.
506.10.1 \u2014 Protection Provided.
506.10.2 \u2014 Systems Conveying Combustible Materials.
506.10.3 \u2014 Reduced Clearance Permitted.
506.10.4 \u2014 Clearance Increases.
506.10.4.1 \u2014 Temperatures Over 900\u00b0F.
506.10.4.2 \u2014 Clearance Reduction.
506.11 \u2014 Clearance Reduction Methods.
506.11.1 \u2014 Spacers and Ties.
506.11.2 \u2014 Wool Batts Insulation.
506.11.3 \u2014 Insulation Board.
506.11.4 \u2014 Duct and Thermal Shield.
506.11.5 \u2014 Thermal Shield and Combustible Surface.
506.11.6 \u2014 Reduced Clearance with Air Gaps.
506.11.6.1 \u2014 Air Circulation.
506.11.6.2 \u2014 Single Flat Wall.
Table 506.10.4 \u2014 Basic Minimum Clearances to Unprotected Surfaces [NFPA 91: Table 4.7.3] <\/td>\n<\/tr>\n
139<\/td>\n506.11.6.3 \u2014 Thermal Shielding.
Part II – Commercial Hoods and Kitchen Ventilation.
507.0 \u2014 General Requirements.
507.1 \u2014 Type I Hood Exhaust System.
507.2 \u2014 Exhaust System.
507.2.1 \u2014 Airflow.
507.2.2 \u2014 Responsibility.
507.2.3 \u2014 Solid-fuel Cooking Equipment.
507.2.4 \u2014 Multitenant Applications.
Table 506.11 \u2014 Reduction of Duct Clearance with Specified Forms of Protection [NFPA 91: Table 4.7.4] <\/td>\n<\/tr>\n
140<\/td>\n507.2.5 \u2014 Interior Surfaces.
507.2.6 \u2014 Used in Other Applications.
507.3 \u2014 Listed Devices.
507.3.1 \u2014 Penetration.
507.4 \u2014 Clearance.
507.4.1 \u2014 Listed.
507.4.2 \u2014 Clearance Reduction.
507.4.2.1 \u2014 Mineral Wool Batts or Ceramic Fiber Blanket.
507.4.2.2 \u2014 Field-Applied Grease Duct Enclosure.
507.4.2.3 \u2014 Zero Clearance.
507.4.3 \u2014 Clearance Integrity.
507.4.3.1 \u2014 Fire.
507.4.3.2 \u2014 Required Protection.
507.4.3.3 \u2014 Protection Methods.
507.4.4 \u2014 Factory Built.
507.4.4.1 \u2014 Listing.
507.4.4.2 \u2014 Single Wall.
507.4.4.3 \u2014 Installation.
507.4.5 \u2014 Field Applied. <\/td>\n<\/tr>\n
141<\/td>\n507.4.6 \u2014 Both Field-Applied and Factory Built.
507.4.6.1 \u2014 Physical Damage.
507.4.6.2 \u2014 Specification.
507.4.6.3 \u2014 Clearance Options.
507.4.7 \u2014 Building and Structural Contact.
507.4.7.1 \u2014 Corrosion Protection.
507.4.7.2 \u2014 Zero Clearance.
507.4.8 \u2014 Clearance Between Duct and Interior Surfaces.
507.5 \u2014 Drawings.
507.6 \u2014 Notification of Change.
507.7 \u2014 Pharmaceutical Compounding Exhaust Discharge. [OSHPD 1, 2, 3, 4 & 5]
508.0 \u2014 Type I Hoods.
508.1 \u2014 Where Required.
508.2 \u2014 Listed Type I Hood Assemblies.
508.2.1 \u2014 Listed Ultraviolet Hoods. <\/td>\n<\/tr>\n
142<\/td>\n508.2.2 \u2014 Listed Ventilated Ceiling Technology.
508.2.3 \u2014 Construction of Listed Exhaust Hoods.
508.2.4 \u2014 Assembly of Listed Exhaust Hoods.
508.3 \u2014 Construction of Type I Hoods.
508.3.1 \u2014 Grease Vapor.
508.3.2 \u2014 Seams, Joints, and Penetrations.
508.3.2.1 \u2014 Sealed.
508.3.3 \u2014 Eyebrow-Type Hoods.
508.3.3.1 \u2014 Duct Connection.
508.3.4 \u2014 Insulation.
508.3.5 \u2014 Exhaust Hood Assemblies with Integrated Supply-Air Plenums.
508.3.5.1 \u2014 Outer Shell.
508.3.5.2 \u2014 Inner Shell.
508.3.5.3 \u2014 Fire Dampers.
Figures
Figure 508.3.3 \u2014 Typical Section of Eyebrow-Type Hood [NFPA 96: Figure 5.1.8.1] <\/td>\n<\/tr>\n
143<\/td>\n508.3.5.3.1 \u2014 Listing.
508.3.5.3.2 \u2014 Actuating Temperature.
508.3.5.3.3 \u2014 Exemption.
508.4 \u2014 Supports.
508.5 \u2014 Hood Size.
508.5.1 \u2014 Canopy Size and Location.
508.5.1.1 \u2014 Capacity of Hoods.
508.5.1.2 \u2014 Extra-Heavy-Duty Cooking Appliances.
508.5.1.3 \u2014 Heavy-Duty Cooking Appliances.
508.5.1.4 \u2014 Medium-Duty Cooking Appliances.
Table 508.5.1.2 \u2014 Extra-Heavy-Duty Cooking Appliance Airflow
Table 508.5.1.3 \u2014 Heavy-Duty Cooking Appliance Airflow
Table 508.5.1.4 \u2014 Medium-Duty Cooking Appliance Airflow <\/td>\n<\/tr>\n
144<\/td>\n508.5.1.5 \u2014 Light-Duty Cooking Appliances.
508.5.2 \u2014 Noncanopy-Type Hoods.
508.5.2.1 \u2014 Installation.
508.5.2.2 \u2014 Capacity.
508.5.3 \u2014 Labeling.
508.6 \u2014 Solid-Fuel Hood Assemblies.
508.7 \u2014 Exhaust Outlets.
509.0 \u2014 Grease Removal Devices in Hoods.
509.1 \u2014 Grease Removal Devices.
509.1.1 \u2014 Grease Filters, Mesh-Type.
509.2 \u2014 Installation.
509.2.1 \u2014 Vertical Distance.
509.2.2 \u2014 Grease Removal Device Protection.
509.2.2.1 \u2014 Installation.
509.2.2.2 \u2014 Size and Location.
509.2.2.3 \u2014 Clearance.
Table 508.5.1.5 \u2014 Light-Duty Cooking Appliance Airflow <\/td>\n<\/tr>\n
145<\/td>\n509.2.3 \u2014 Grease Filters.
509.2.3.1 \u2014 Arrangement.
509.2.3.2 \u2014 Accessibility.
509.2.3.3 \u2014 Angled Installation.
509.2.3.4 [DPH] \u2014 Grease filters shall be Class I when tested in accordance with the test method in SFM 12-71-1.
509.2.4 \u2014 Grease Drip Trays.
509.2.4.1 \u2014 Size and Pitch.
509.2.5 \u2014 Grease Filter Orientation.
509.3 \u2014 Solid-Fuel Grease Removal Devices.
510.0 \u2014 Exhaust Duct Systems.
510.1 \u2014 General.
510.1.1 \u2014 Fire Hazards.
510.1.2 \u2014 Interconnection.
510.1.3 \u2014 Duct Installation.
510.1.4 \u2014 Accessibility.
510.1.5 \u2014 Sign.
510.1.6 \u2014 Bracing and Supports.
510.1.7 \u2014 Type I Exhaust Duct Systems.
510.2 \u2014 Clearance.
510.3 \u2014 Openings.
510.3.1 \u2014 Access Panel.
510.3.2 \u2014 Access for Cleaning and Inspection. <\/td>\n<\/tr>\n
146<\/td>\n510.3.3 \u2014 Horizontal Ducts.
510.3.3.1 \u2014 Cleaning.
510.3.3.2 \u2014 Safe Access and Work Platform.
510.3.3.3 \u2014 Support.
510.3.4 \u2014 Vertical Ducts.
510.3.4.1 \u2014 Access.
510.3.4.2 \u2014 Safe Access and Work Platform.
510.3.5 \u2014 Nonlisted Ductwork.
510.3.6 \u2014 Access Panels.
510.3.6.1 \u2014 Listed Grease Ducts.
510.3.6.2 \u2014 Within an Enclosure.
510.3.7 \u2014 Fire Protection System Devices.
510.4 \u2014 Listed Grease Ducts.
510.4.1 \u2014 Factory-Built Grease Ducts.
510.5 \u2014 Other Grease Ducts.
510.5.1 \u2014 Materials.
510.5.2 \u2014 Factory-Built Grease Ducts.
510.5.3 \u2014 Installation.
510.5.3.1 \u2014 Duct Leakage Test.
510.5.3.2 \u2014 Welded Duct Connection. <\/td>\n<\/tr>\n
147<\/td>\nFigure 510.5.3 \u2014 Permitted Duct-To Hood Collar Connection [NFPA 96: Figure 7.5.2.2]
Figure 510.5.3.2(1) \u2014 Telescoping -Type Duct Connection [NFPA 96: Figure 7.5.5.1(a)]
Figure 510.5.3.2(2) \u2014 Bell-Type Duct Connection [NFPA 96: Figure 7.5.5.1(B)]
Figure 510.5.3.2(3) \u2014 Flange with Edge Weld Duct Connection [NFPA 96: Figure 7.5.5.1(C)]
Figure 510.5.3.2(4) \u2014 Flange with Filled Weld Duct Connection [NFPA 96: Figure 7.5.5.1(D)] <\/td>\n<\/tr>\n
148<\/td>\n510.5.4 \u2014 Butt Welded Connections.
510.5.5 \u2014 Telescoping and Bell-Type Connections.
510.5.6 \u2014 Duct Leakage Test.
510.6 \u2014 Exterior Installations.
510.6.1 \u2014 Weather Protection.
510.7 \u2014 Interior Installations.
510.7.1 \u2014 Less than Four Stories.
510.7.2 \u2014 Four Stories or More.
510.7.3 \u2014 Clearance.
510.7.4 \u2014 Mechanical and Structural Integrity.
510.7.5 \u2014 Materials.
510.7.5.1 \u2014 Protection from Physical Damage.
510.7.5.2 \u2014 Inspection. <\/td>\n<\/tr>\n
149<\/td>\n510.7.6 \u2014 Listed.
510.7.7 \u2014 Fire Doors.
510.7.8 \u2014 Ducts with Enclosure(s).
510.8 \u2014 Underground Installations.
510.8.1 \u2014 Grease Receptacle.
510.8.2 \u2014 Cleanouts.
510.9 \u2014 Termination of Type I Hood Exhaust System.
510.9.1 \u2014 Rooftop Terminations.
Figure 510.9.1 \u2014 Upblast Fan Clearances [NFPA 96: Figure 7.8.2.1] <\/td>\n<\/tr>\n
150<\/td>\n510.9.1.1 \u2014 Listed Vibration Isolation Connectors.
510.9.1.2 \u2014 Inspection and Cleaning.
510.9.2 \u2014 Wall Terminations.
510.10 \u2014 Solid-Fuel Duct Systems.
511.0 \u2014 Air Movement.
511.1 \u2014 Exhaust Fans for Commercial Cooking Operations.
511.1.1 \u2014 Upblast Fans.
511.1.2 \u2014 In-Line Exhaust Fans.
511.1.2.1 \u2014 Accessibility.
Figure 510.9.2 \u2014 Exhaust Termination Distance from Fresh Air Intake (Fai) or Operable Door or Window [NFPA 96: Figure 7.8.3] <\/td>\n<\/tr>\n
151<\/td>\n511.1.3 \u2014 Utility Set Exhaust Fans.
511.1.3.1 \u2014 At the Rooftop.
511.1.3.2 \u2014 Within the Building.
Figure 511.1.2(1) \u2014 Typical Section of Duct-To-Fan Connection-Butt Joint Method [NFPA 96: Figure 8.1.3.2(a)]
Figure 511.1.2(2) \u2014 Typical Section of Duct-To-Fan Connection-Overlapping Method [NFPA 96: Figure 8.1.3.2(b)]
Figure 511.1.2(3) \u2014 Typical Section of Duct-To-Fan Connection\u2013Sealant Method [NFPA 96: Figure 8.1.3.2(c)]
Figure 511.1.2(4) \u2014 Typical Section of Duct-To-Fan Connection-Direct To Fan Inlet Cone Method [NFPA 96: Figure 8.1.3.2(d)] <\/td>\n<\/tr>\n
152<\/td>\n511.1.3.3 \u2014 Duct Systems.
511.1.4 \u2014 Construction.
511.1.5 \u2014 Openings.
511.1.6 \u2014 Standard.
511.2 \u2014 Airflow.
511.2.1 \u2014 Exceptions.
511.2.2 \u2014 Exhaust-Air Volumes.
511.2.2.1 \u2014 Performance Test.
511.2.2.2 \u2014 Capture and Containment Test.
511.2.3 \u2014 Exhaust Fan Operation.
511.3 \u2014 Makeup Air.
511.3.1 \u2014 Air Balance.
511.4 \u2014 Common Duct (Manifold) Systems. <\/td>\n<\/tr>\n
153<\/td>\n511.4.1 \u2014 Connections.
511.4.2 \u2014 Fire Damper.
511.4.3 \u2014 Construction and Clearance.
511.4.4 \u2014 Adjustment.
511.4.5 \u2014 Adjustment Location.
511.4.6 \u2014 Bleed Air Duct.
511.4.7 \u2014 Disconnect.
511.5 \u2014 Solid-Fuel Air Movement Requirements.
512.0 \u2014 Auxiliary Equipment.
512.1 \u2014 Dampers.
512.1.1 \u2014 Use.
512.2 \u2014 Electrical Equipment.
512.2.1 \u2014 Device Installation in Ducts.
512.2.2 \u2014 Lighting Units.
512.2.3 \u2014 Concealed Spaces.
512.2.4 \u2014 Listed Lighting Units.
512.2.5 \u2014 Standard.
512.3 \u2014 Other Equipment.
512.3.1 \u2014 Access Required.
512.3.2 \u2014 Downgrading.
512.3.3 \u2014 Fire-Extinguishing System.
512.3.3.1 \u2014 Protection.
512.3.3.2 \u2014 Filter Media.
512.3.4 \u2014 Source of Ignition.
512.3.5 \u2014 Air Recirculation.
512.3.6 \u2014 Carbon Monoxide Detector Required.
512.4 \u2014 Solid-Fuel Auxiliary Equipment. <\/td>\n<\/tr>\n
154<\/td>\n513.0 \u2014 Fire-Extinguishing Equipment.
513.1 \u2014 General.
513.1.1 \u2014 Devices in Exhaust Ducts.
513.1.2 \u2014 Protection.
513.2 \u2014 Types of Equipment.
513.2.1 \u2014 Identification.
513.2.2 \u2014 Standard.
513.2.3 \u2014 Installation.
513.2.4 \u2014 Modification of Existing Hood Systems.
513.2.4.1 \u2014 Sealing.
513.2.4.2 \u2014 Obstructions.
513.2.4.3 \u2014 System Re-evaluation.
513.2.5 \u2014 Baffle Hoods with Water Wash.
513.2.5.1 \u2014 Listed for the Purpose.
513.2.5.2 \u2014 Domestic Water Supply.
513.2.5.3 \u2014 Control Valve.
513.2.5.4 \u2014 Activation. <\/td>\n<\/tr>\n
155<\/td>\n513.2.5.5 \u2014 Water-Wash System.
513.2.5.6 \u2014 Exception.
513.2.5.7 \u2014 Water Supply.
513.2.6 \u2014 Water Valve Supervision.
513.3 \u2014 Simultaneous Operation.
513.3.1 \u2014 Hoods.
513.3.1.1 \u2014 Common Ductwork.
513.3.2 \u2014 Independent Systems.
513.3.3 \u2014 Exempt Equipment.
513.3.4 \u2014 Automatic Sprinkler System.
513.3.5 \u2014 Dry or Wet Chemical Systems.
513.4 \u2014 Fuel and Electric Power Shutoff.
513.4.1 \u2014 Steam.
513.4.2 \u2014 Protection Not Required.
513.4.3 \u2014 Manual Reset.
513.5 \u2014 Manual Activation. <\/td>\n<\/tr>\n
156<\/td>\n513.6 \u2014 System Annunciation.
513.6.1 \u2014 Signaling.
513.7 \u2014 Special Design and Application.
513.8 \u2014 Review and Certification.
513.9 \u2014 Installation Requirements.
513.10 \u2014 Portable Fire Extinguishers.
513.10.1 \u2014 Other Fire Extinguishers.
513.10.2 \u2014 Carbon Dioxide-Type.
513.11 \u2014 Maintenance.
513.11.1 \u2014 Permitted Use.
513.12 \u2014 Solid-Fuel Fire-Extinguishing Equipment.
514.0 \u2014 Procedures for the Use, Inspection, Testing, and Maintenance of Equipment.
514.1 \u2014 Operating Procedures.
514.1.1 \u2014 Filters.
514.1.2 \u2014 Openings.
514.1.3 \u2014 Posting of Instructions.
514.1.4 \u2014 Listing and Manufacturer\u2019s Instructions.
514.1.5 \u2014 Nonoperational.
514.1.6 \u2014 Secondary Control Equipment.
514.1.7 \u2014 Inspection Frequency.
514.2 \u2014 Inspection, Testing, and Maintenance.
514.2.1 \u2014 Requirements.
514.2.2 \u2014 Fusible Links and Sprinklers.
514.2.3 \u2014 Inspection Tag. <\/td>\n<\/tr>\n
157<\/td>\n514.2.4 \u2014 Temperature-Sensing Elements.
514.2.5 \u2014 Certification.
514.3 \u2014 Inspection for Grease Buildup.
514.4 \u2014 Cleaning of Exhaust Systems.
514.4.1 \u2014 Measurement System.
514.4.1.1 \u2014 Combustible Contaminants.
514.4.1.2 \u2014 Gauge Comb.
514.4.1.3 \u2014 Cleaning Method.
514.4.1.4 \u2014 Combustible Contaminants.
514.4.2 \u2014 Removal of Contaminants.
514.4.3 \u2014 Electrical Switches.
514.4.4 \u2014 Fire Suppression System.
514.4.5 \u2014 Inoperable.
514.4.6 \u2014 Solvents\/Cleaning Aids.
514.4.7 \u2014 Cleaning Chemicals.
514.4.8 \u2014 Coating.
514.4.9 \u2014 Access Panels and Cover Plates.
514.4.10 \u2014 Date of Inspection.
Table 514.3 \u2014 Schedule of Inspection for Grease Buildup [NFPA 96: Table 11.4]
Figure 514.4.1.2 \u2014 Depth Gauge Comb [NFPA 96: Figure 11.6.1.1.2] <\/td>\n<\/tr>\n
158<\/td>\n514.4.11 \u2014 Airflow.
514.4.12 \u2014 Operable State.
514.4.13 \u2014 Certification of Service.
514.4.14 \u2014 Report Provided.
514.4.15 \u2014 Unclean Area.
514.4.16 \u2014 Metal Containers.
514.5 \u2014 Cooking Equipment Maintenance.
514.5.1 \u2014 Cleaning.
515.0 \u2014 Minimum Safety Requirements for Cooking Equipment.
515.1 \u2014 Cooking Equipment.
515.1.1.1 \u2014 Re-evaluation.
515.1.1.2 \u2014 Prior Location.
515.1.1.3 \u2014 Minimum Space.
515.1.1.4 \u2014 Space Not Required.
515.1.1.5 \u2014 Minimum Height.
515.2 \u2014 Operating Controls.
516.0 \u2014 Recirculating Systems.
516.1 \u2014 General Requirements.
516.2 \u2014 Design Restrictions.
516.2.1 \u2014 Gas\/Electrically Fueled Cooking Appliances. <\/td>\n<\/tr>\n
159<\/td>\n516.2.2 \u2014 Recirculation.
516.2.3 \u2014 Protection.
516.2.4 \u2014 Maximum Limits.
516.2.5 \u2014 Label.
516.2.6 \u2014 Fire Damper.
516.2.7 \u2014 Installation of Electrical Wiring.
516.2.8 \u2014 Power Supply.
516.2.9 \u2014 Listing Evaluation.
516.3 \u2014 Interlocks.
516.3.1 \u2014 Airflow Sections.
516.3.2 \u2014 Filter Component.
516.3.3 \u2014 ESP Interlocks.
516.3.3.1 \u2014 Manual Reset.
516.3.4 \u2014 Airflow Switch or Transducer.
516.4 \u2014 Location and Application Restrictions.
516.5 \u2014 Additional Fire Safety Requirements.
516.5.1 \u2014 Installation Downstream.
516.5.2 \u2014 Locations.
516.6 \u2014 Use and Maintenance.
516.6.1 \u2014 Manufacturer\u2019s Instructions.
516.6.2 \u2014 Cleaning Schedule. <\/td>\n<\/tr>\n
160<\/td>\n516.6.3 \u2014 Hood Plenum and Blower Section Cleaning Schedule.
516.6.4 \u2014 Inspection of Safety Interlocks.
516.6.5 \u2014 Inspection.
516.6.6 \u2014 Maintenance Log.
517.0 \u2014 Solid-Fuel Cooking Operations.
517.1 \u2014 Venting Application.
517.1.1 \u2014 Natural Draft.
517.1.2 \u2014 System Compliance.
517.1.3 \u2014 Makeup Air System.
517.1.4 \u2014 Natural Draft Ventilation Systems.
517.1.5 \u2014 Opening Requirements.
517.1.6 \u2014 Spark Arresters.
517.2 \u2014 Location of Appliances.
517.2.1 \u2014 Prohibited Location.
517.2.2 \u2014 Flammable Vapors.
517.3 \u2014 Hoods for Solid-Fuel Cooking.
517.3.1 \u2014 Separation.
517.3.1.1 \u2014 Equipment with Solid Fuel for Flavoring. <\/td>\n<\/tr>\n
161<\/td>\n517.4 \u2014 Exhaust Systems for Solid-Fuel Cooking.
517.4.1 \u2014 Hood.
517.4.2 \u2014 Building Exceeding Four Stories.
517.4.3 \u2014 Prohibited.
517.5 \u2014 Grease Removal Devices for Solid-Fuel Cooking.
517.5.1 \u2014 Spark Arrester Devices.
517.5.2 \u2014 Filters.
517.6 \u2014 Air Movement for Solid-Fuel Cooking.
517.6.1 \u2014 Replacement Air.
517.6.2 \u2014 Operation.
517.7 \u2014 Fire-Extinguishing Equipment for Solid-FuelCooking.
517.7.1 \u2014 Grease Removal Devices, Hoods, and Duct Systems.
517.7.2 \u2014 Listed Fire-Extinguishing Equipment.
517.7.3 \u2014 Rating and Design.
517.7.4 \u2014 Listing\/Class.
517.7.5 \u2014 Fixed-Water Pipe System.
517.7.6 \u2014 Fuel Storage. <\/td>\n<\/tr>\n
162<\/td>\n517.7.7 \u2014 Auxiliary Fuel.
517.8 \u2014 Other Safety Requirements.
517.8.1 \u2014 Site-Built Solid Fuel Cooling Appliances.
517.8.2 \u2014 Additional Devices.
517.8.3 \u2014 Prohibited.
518.0 \u2014 Downdraft Appliances.
518.1 \u2014 General.
518.2 \u2014 Ventilation System.
518.3 \u2014 Fire-Extinguishing Equipment.
518.3.1 \u2014 Integral Fire-Extinguishing System.
518.3.2 \u2014 Interlocks.
518.4 \u2014 Airflow Switch or Transducer.
518.4.1 \u2014 Interlocks. <\/td>\n<\/tr>\n
163<\/td>\n518.4.2 \u2014 Manual Reset.
518.5 \u2014 Surface Materials.
519.0 \u2014 Type II Hood Exhaust System Requirements.
519.1 \u2014 Where Required.
519.2 \u2014 Construction of Type II Hoods.
519.3 \u2014 Dishwashing Appliances.
519.4 \u2014 Type II Exhaust Duct Systems.
519.5 \u2014 Termination of Type II Hood Exhaust System.
519.6 \u2014 Makeup Air. <\/td>\n<\/tr>\n
164<\/td>\nChapter 6 \u2014 Duct Systems <\/td>\n<\/tr>\n
166<\/td>\n601.0 \u2014 General.
601.1 \u2014 Applicability.
601.2 \u2014 Sizing Requirements.
601.2.1 \u2014 California Energy Code Residential Return Duct Sizing Requirements.
602.0 \u2014 Material.
602.1 \u2014 General.
602.2 \u2014 Combustibles Within Ducts or Plenums.
602.2.1 \u2014 Electrical.
602.2.2 \u2014 Fire Sprinkler Piping.
602.2.3 \u2014 Pneumatic Tubing.
602.2.4 \u2014 Discrete Products in Plenums.
602.3 \u2014 Metallic.
602.4 \u2014 Nonmetallic Ducts.
602.4.1 \u2014 Phenolic.
602.4.2 \u2014 Gypsum. <\/td>\n<\/tr>\n
167<\/td>\n602.4.3 \u2014 Air Dispersion Systems.
602.4.4 \u2014 Other Materials.
602.5 \u2014 Vibration Isolators.
602.6 \u2014 Corridors.
603.0 \u2014 Installation of Ducts.
603.1 \u2014 General.
603.1.1 \u2014 Pressure Classification.
603.1.2 \u2014 Air Temperature.
603.1.3 \u2014 Protection.
603.1.4 \u2014 Vertical Risers.
603.1.5 \u2014 Penetrations.
603.2 \u2014 Under Floor or Crawl Space.
603.3 \u2014 Metal Ducts.
603.3.1 \u2014 Earthquake Loads.
603.4 \u2014 Flexible Air Ducts.
603.4.1 \u2014 Length Limitation. [Not permitted for OSHPD 1, 1R, 2, 3, 4 & 5] <\/td>\n<\/tr>\n
168<\/td>\n603.4.1.1 \u2014 Flexible Ducts. [OSHPD 1, 1R, 2, 3, 4 & 5]
603.4.2 \u2014 Flexible Air Connectors.
603.5 \u2014 Plastic Ducts.
603.6 \u2014 Protection of Ducts.
603.7 \u2014 Support of Ducts.
603.7.1 \u2014 Metal Ducts.
603.7.1.1 \u2014 Rectangular Ducts.
603.7.1.2 \u2014 Horizontal Round Ducts.
603.7.1.3 \u2014 Tight-Fitting Around the Perimeter.
603.7.1.4 \u2014 Size of Circular Bands.
603.7.1.5 \u2014 Connection.
603.7.2 \u2014 Flexible Air Ducts.
603.7.3 \u2014 Other Ducts.
603.8 \u2014 Protection Against Flood Damage.
603.9 \u2014 Joints and Seams of Ducts.
603.9.1 \u2014 Closure Systems.
603.9.2 \u2014 Duct Leakage Tests. [Not adopted by HCD]
Tables
Table 603.9.1 \u2014 Closure Markings <\/td>\n<\/tr>\n
169<\/td>\n603.9.2.1 \u2014 Duct Leakage Tests for Buildings that Meet Air Distribution System Duct Leakage Sealing Criteria in Title 24, Part 6.
603.10 \u2014 Cross Contamination.
603.11 \u2014 Underground Installation.
603.12 \u2014 Air Dispersion Systems.
603.13 \u2014 Clearances.
603.13.1 \u2014 General.
603.13.2 \u2014 Supply Air Ducts to Listed Furnaces.
603.13.3 \u2014 Supply Air Ducts to Unlisted Furnaces.
603.13.4 \u2014 Furnace Plenums and Air Ducts.
603.13.5 \u2014 Duct Furnaces.
603.13.6 \u2014 Fuel-Burning Kilns.
604.0 \u2014 Furnace Plenums and Ducts Used in Fuel-Gas Appliances.
604.1 \u2014 Furnace Plenums and Air Ducts.
604.2 \u2014 Supplied as a Part of Furnace.
604.3 \u2014 Not Supplied with the Furnace. <\/td>\n<\/tr>\n
170<\/td>\n604.4 \u2014 Return Air.
605.0 \u2014 Insulation of Ducts.
605.1 \u2014 General.
605.1.1 \u2014 Within Ducts or Plenums.
605.1.2 Duct Coverings and Linings.
605.2 [OSHPD 1, 1R, 2, 3 (surgical clinics), 4 & 5] \u2014 Thermal acoustical lining materials shall not be installed within ducts, terminal boxes, sound traps, and other in-duct systems serving areas such as operating, cesarean operating rooms, delivery rooms, post anesthesia care units, cystoscopy, cardiac catheterization labs, nurseries, intensive care units, newborn intensive care units, and airborne infection isolation rooms unless filters with 90 percent average efficiency based on ASHRAE Standard 52.2 or minimum efficiency rating value (MERV) of 14 are installed downstream of the duct lining.
605.3 [OSHPD 1, 1R, 2, 4 & 5] \u2014 Thermal or acoustical lining materials shall not be installed within ducts which are downstream of the 99.97 percent high-efficiency particulate air (HEPA) filter or with minimum efficiency rating value (MERV) of 17 required in Section 408.2.1 for protective environment rooms.
606.0 \u2014 Smoke Dampers, Fire Dampers, and Ceiling Dampers.
606.1 \u2014 Smoke Dampers.
606.2 \u2014 Fire Dampers.
606.3 \u2014 Ceiling Radiation Dampers.
606.4 \u2014 Multiple Arrangements.
606.5 \u2014 Access and Identification. <\/td>\n<\/tr>\n
171<\/td>\n606.6 \u2014 Freedom from Interference.
606.7 \u2014 Temperature Classification of Operating Elements.
606.8 \u2014 When the automatic activation of a smoke damper or a combination smoke-fire damper occurs, the HVAC system serving such dampers shall immediately shut down.
607.0 \u2014 Ventilating Ceilings.
607.1 \u2014 General.
607.1.1 [OSHPD 1, 1R, 2, 3, 4 & 5] \u2014 Ventilating ceilings are not permitted in health facilities.
607.2 \u2014 Requirements.
608.0 \u2014 Use of Under-Floor Space as Supply Plenum for Dwelling Units.
608.1 \u2014 General.
608.2 \u2014 Dwelling Units.
608.3 \u2014 Enclosed.
608.4 \u2014 Flammable Materials.
608.5 \u2014 Access.
608.6 \u2014 Automatic Control.
608.7 \u2014 Temperature Limit.
608.8 \u2014 Noncombustible Receptacle.
608.8.1 \u2014 Location.
608.8.2 \u2014 Area.
608.8.3 \u2014 Perimeter.
608.9 \u2014 Floor Registers.
608.10 \u2014 Exterior Wall and Interior Stud Partitions. <\/td>\n<\/tr>\n
172<\/td>\n608.11 \u2014 Wall Register.
608.12 \u2014 Distance from Combustible.
608.13 \u2014 Vapor Barrier.
608.14 \u2014 Prohibited.
609.0 Automatic Shutoffs.
609.1 \u2014 Air-Moving Systems and Smoke Detectors. <\/td>\n<\/tr>\n
174<\/td>\nChapter 7 \u2014 Combustion Air <\/td>\n<\/tr>\n
176<\/td>\n701.0 \u2014 General.
701.1 \u2014 Applicability.
701.1.1 \u2014 Other Types of Appliances.
701.2 \u2014 Pressure Difference.
701.3 \u2014 Makeup Air.
701.4 \u2014 Indoor Combustion Air.
701.4.1 \u2014 Standard Method.
701.4.2 \u2014 Known Air Infiltration Rate Method.
701.5 \u2014 Indoor Opening Size and Location.
701.6 \u2014 Outdoor Combustion Air. <\/td>\n<\/tr>\n
177<\/td>\n701.6.1 \u2014 Two Permanent Openings Method.
701.6.2 \u2014 One Permanent Opening Method.
701.7 \u2014 Combination Indoor and Outdoor Combustion Air.
Figures
Figure 701.5 \u2014 All Combustion Air from Adjacent Indoor Spaces Through Indoor Combustion Air Openings [NFPA 54: Figure A.9.3.2.3(1)]
Figure 701.6.1(1) \u2014 All Combustion Air from Outdoors – Inlet Air From Ventilated Crawl Space and Outlet Air to Ventilated Attic [NFPA 54: Figure A.9.3.3.1(1)(a)]
Figure 701.6.1(2) \u2014 All Combustion Air From Outdoors through Ventilated Attic [NFPA 54: Figure A.9.3.3.1(1) <\/td>\n<\/tr>\n
178<\/td>\n701.7.1 \u2014 Indoor Openings.
701.7.2 \u2014 Outdoor Opening(s) Location.
701.7.3 \u2014 Outdoor Opening(s) Size.
701.8 \u2014 Engineered Installations.
701.9 \u2014 Mechanical Combustion Air Supply.
701.9.1 \u2014 Exhaust Fans.
701.9.2 \u2014 Interlock.
701.9.3 \u2014 Specified Combustion Air.
701.10 \u2014 Louvers, Grilles, and Screens.
701.10.1 \u2014 Minimum Screen Mesh Size.
701.10.2 \u2014 Motorized Louvers.
Figure 701.6.1(3) \u2014 All Combustion Air from Outdoors Through Horizontal Ducts [NFPA 54: Figure A.9.3.3.1(2)]
Figure 701.6.2 \u2014 All Combustion Air from Outdoors Through Single Combustion Air Opening [NFPA 54: Figure A.9.3.3.2] <\/td>\n<\/tr>\n
179<\/td>\n701.11 \u2014 Combustion Air Ducts.
701.12 \u2014 Dampers Prohibited.
702.0 \u2014 Extra Device or Attachment.
702.1 \u2014 General. <\/td>\n<\/tr>\n
180<\/td>\nChapter 8 \u2014 Chimneys and Vents <\/td>\n<\/tr>\n
182<\/td>\n801.0 \u2014 General.
801.1 \u2014 Applicability.
801.2 \u2014 Venting of Gas Appliances.
801.3 \u2014 Appliances Fueled by Other Fuels.
802.0 \u2014 Venting of Appliances.
802.1 \u2014 Listing.
802.1.1 \u2014 Installation.
802.1.2 \u2014 Prohibited Discharge.
802.2 \u2014 Connection to Venting Systems.
802.2.1 \u2014 Appliances Not Required to be Vented.
802.2.2 \u2014 Maximum Input Rating.
802.2.3 \u2014 Adjacent Room or Space.
802.2.4 \u2014 Ventilating Hoods.
802.2.5 \u2014 Well-Ventilated Spaces.
802.2.6 \u2014 Direct Vent Appliances.
802.2.7 \u2014 Appliances with Integral Vents.
802.2.8 \u2014 Incinerators, Commercial\u2013Industrial.
802.3 \u2014 Minimum Safe Performance.
802.3.1 \u2014 Appliance Draft Requirements.
802.3.2 \u2014 Appliance Venting Requirements. <\/td>\n<\/tr>\n
183<\/td>\n802.3.3 \u2014 Mechanical Draft Systems.
802.3.3.1 \u2014 Venting.
802.3.3.2 \u2014 Leakage.
802.3.3.3 \u2014 Vent Connectors.
802.3.3.4 \u2014 Operation.
802.3.3.5 \u2014 Exit Terminals.
802.3.4 \u2014 Ventilating Hoods and Exhaust Systems.
802.3.5 \u2014 Circulating Air Ducts, Above-Ceiling Air-Handling Spaces, and Furnace Plenums.
802.3.6 \u2014 Above-Ceiling or Nonducted Air Handling System.
802.4 \u2014 Type of Venting System to be Used.
802.4.1 \u2014 Plastic Piping.
802.4.2 \u2014 Plastic Vent Joints.
802.4.3 \u2014 Special Gas Vents.
802.5 \u2014 Masonry, Metal, and Factory-Built Chimneys.
802.5.1 \u2014 Factory-Built Chimneys.
802.5.1.1 \u2014 Decorative Shrouds.
802.5.2 \u2014 Metal Chimneys.
802.5.3 \u2014 Masonry Chimneys. <\/td>\n<\/tr>\n
184<\/td>\n802.5.4 \u2014 Termination.
802.5.4.1 \u2014 Medium-Heat Gas Appliances.
802.5.4.2 \u2014 Chimney Height.
802.5.4.3 \u2014 Decorative Shrouds.
802.5.5 \u2014 Size of Chimneys.
Tables
Table 802.4 \u2014 Type of Venting System To Be Used [NFPA 54: Table 12.5.1] <\/td>\n<\/tr>\n
185<\/td>\n802.5.6 \u2014 Inspection of Chimneys or Vents.
802.5.7 \u2014 Inspection of Chimneys.
802.5.7.1 \u2014 Standard.
802.5.7.2 \u2014 Cleanouts.
802.5.7.3 \u2014 Existing Chimney.
802.5.8 \u2014 Chimney Serving Appliances Burning Other Fuels.
802.5.8.1 \u2014 Gas and Liquid Fuel-Burning Appliances.
Figures
Figure 802.5.4 \u2014 Typical Termination Locations for Chimneys and Single-Wall Metal Pipes Serving Residential-Type and Low-Heat Appliance [NFPA 54: Figure A.12.6.2.1] <\/td>\n<\/tr>\n
186<\/td>\n802.5.8.2 \u2014 Gas and Solid Fuel-Burning Appliances.
802.5.8.3 \u2014 Combination Gas- and Oil-Burning Appliances.
802.5.9 \u2014 Support of Chimneys.
802.5.10 \u2014 Cleanouts.
802.5.11 \u2014 Space Surrounding Lining or Vent.
802.5.11.1 \u2014 Combustion Air.
802.6 \u2014 Gas Vents.
802.6.1 \u2014 Gas Vent Termination. <\/td>\n<\/tr>\n
187<\/td>\n802.6.1.1 \u2014 Insulation Shield.
802.6.2 \u2014 Size of Gas Vents.
802.6.2.1 \u2014 Category I Appliances.
802.6.2.2 \u2014 Vent Offsets.
802.6.2.3 \u2014 Category II, Category III, and Category IV Appliances.
802.6.2.4 \u2014 Sizing.
802.6.3 \u2014 Gas Vents Serving Appliances on More than One Floor.
Table 802.6.1 \u2014 Roof Pitch Height
Figure 802.6.1 \u2014 Termination Locations for Gas Vents with Listed Caps 12 Inches or Less in Size Not Less Than 8 Feet from A Vertical Wall [NFPA 54: Figure 12.7.3] <\/td>\n<\/tr>\n
188<\/td>\n802.6.3.1 \u2014 Occupiable Space.
802.6.3.2 \u2014 Multistory Venting System.
802.6.4 \u2014 Support of Gas Vents.
802.6.5 \u2014 Marking.
802.7 \u2014 Single-Wall Metal Pipe.
802.7.1 \u2014 Cold Climate.
802.7.2 \u2014 Termination.
802.7.3 \u2014 Installation with Appliances Permitted by Section 802.4.
802.7.3.1 \u2014 Limitations.
Figure 802.6.3.1 \u2014 Plan View of Practical Separation Method for Multistory Gas Venting [NFPA 54: Figure A.12.7.5.2]
Figure 802.6.3.2 \u2014 Use of Manifolded Common Vent Connector [NFPA 54: Figure F.1(k)] <\/td>\n<\/tr>\n
189<\/td>\n802.7.3.2 \u2014 Attic or Concealed Space.
802.7.3.3 \u2014 Clearances.
802.7.3.4 \u2014 Combustible Exterior Wall.
802.7.3.5 \u2014 Roof Thimble.
802.7.4 \u2014 Size of Single-Wall Metal Pipe.
Table 802.7.3.3 \u2014 Clearance for Connectors [NFPA 54: Table 12.8.4.4] <\/td>\n<\/tr>\n
190<\/td>\n802.7.5 \u2014 Support of Single-Wall Metal Pipe.
802.7.6 \u2014 Marking.
802.8 \u2014 Through-the-Wall Vent Termination.
802.8.1 \u2014 Mechanical Draft Venting System.
802.8.2 \u2014 Direct Vent Appliance.
802.8.3 \u2014 Category I through Category IV and Noncategorized Appliances.
802.8.4 \u2014 Annular Spaces.
802.8.5 \u2014 Vent Terminals.
802.9 \u2014 Condensation Drain.
802.9.1 \u2014 Local Experience.
802.10 \u2014 Vent Connectors for Category I Appliances.
802.10.1 \u2014 Materials.
802.10.1.1 \u2014 Unconditioned Area.
Table 802.8.2 \u2014 Through-the-Wall Direct Vent Termination Clearances [NFPA 54: Table 12.9.3] <\/td>\n<\/tr>\n
191<\/td>\n802.10.1.2 \u2014 Residential-Type Appliances.
802.10.1.2 \u2014 Residential-Type Appliances.
802.10.1.3 \u2014 Nonresidential Low-Heat Appliances.
Table 802.10.1.3 \u2014 Minimum Thickness for Galvanized Steel Vent Connectors for Low-Heat Appliances [NFPA 54: Table 12.11.2.4]
Figure 802.8 \u2014 Exit Terminals of Mechanical Draft and Direct Vent Venting Systems [NFPA 54: Figure A.12.9] <\/td>\n<\/tr>\n
192<\/td>\n802.10.1.4 \u2014 Medium-Heat Appliances.
802.10.2 \u2014 Size of Vent Connector.
802.10.2.1 \u2014 Manifold.
802.10.2.2 \u2014 Size.
802.10.2.3 \u2014 Height.
802.10.2.4 \u2014 Size Increase.
802.10.3 \u2014 Two or More Appliances Connected to a Single Vent.
802.10.3.1 \u2014 Height of Connector.
802.10.3.2 \u2014 Pressure.
802.10.4 \u2014 Clearance.
Table 802.10.1.4 \u2014 Minimum Thickness for Steel Vent Connectors for Medium-Heat Appliances [NFPA 54: Table 12.11.2.5] <\/td>\n<\/tr>\n
193<\/td>\n802.10.5 \u2014 Joints.
802.10.6 \u2014 Slope.
802.10.7 \u2014 Length of Vent Connector.
802.10.7.1 \u2014 Single Wall Connector.
802.10.7.2 \u2014 Type B Double Wall Connector.
802.10.8 \u2014 Support.
802.10.9 \u2014 Chimney Connection.
802.10.10 \u2014 Inspection.
802.10.11 \u2014 Fireplaces.
802.10.12 \u2014 Passage through Ceilings, Floors, or Walls.
802.10.12.1 \u2014 Medium-Heat Appliances.
802.11 \u2014 Vent Connectors for Category II, Category III, and Category IV Appliances.
802.12 \u2014 Draft Hoods and Draft Controls.
802.12.1 \u2014 Installation.
802.12.2 \u2014 Draft Control Devices.
802.12.3 \u2014 Additional Devices. <\/td>\n<\/tr>\n
194<\/td>\n802.12.4 \u2014 Location.
802.12.5 \u2014 Positioning.
802.12.6 \u2014 Clearance.
802.13 \u2014 Manually Operated Dampers.
802.14 \u2014 Obstructions.
802.15 \u2014 Automatically Operated Vent Dampers.
802.15.1 \u2014 Listing.
803.0 \u2014 Sizing of Category I Venting Systems.
803.1 \u2014 Single Appliance Vent Table 803.1.2(1) through Table 803.1.2(6).
803.1.1 \u2014 Vent Downsizing.
803.1.2 \u2014 Elbows. <\/td>\n<\/tr>\n
195<\/td>\n803.1.3 \u2014 Zero Lateral.
803.1.4 \u2014 High-Altitude Installations.
803.1.5 \u2014 Multiple Input Ratings.
803.1.6 \u2014 Corrugated Chimney Liner Reduction.
803.1.7 \u2014 Connection to Chimney Liners.
803.1.8 \u2014 Vertical Vent Upsizing Using 7 x Rule.
803.1.9 \u2014 Draft Hood Conversion Accessories.
803.1.10 \u2014 Chimney and Vent Locations.
803.1.11 \u2014 Residential and Low-Heat Appliances.
803.1.11.1 \u2014 Clay Flue Lining.
803.1.11.2 \u2014 Chimney Lining.
803.1.12 \u2014 Corrugated Vent Connector Size.
803.1.13 \u2014 Upsizing.
803.1.14 \u2014 Single Run of Vent.
803.1.15 \u2014 Interpolation.
803.1.16 \u2014 Extrapolation.
803.1.17 \u2014 Engineering Methods.
803.1.18 \u2014 Height Entries. <\/td>\n<\/tr>\n
196<\/td>\n803.2 \u2014 Multiple Appliance Vent Table 803.2(1) through Table 803.2(9).
803.2.1 \u2014 Vent Connector Maximum Length.
803.2.2 \u2014 Vent Connector Exceeding Maximum Length.
803.2.3 \u2014 Vent Connector Manifolds.
803.2.4 \u2014 Vent Offsets.
803.2.5 \u2014 Elbows in Vents.
Table 803.2.1 \u2014 Vent Connector Maximum Length [NFPA 54: 13.2.2] <\/td>\n<\/tr>\n
197<\/td>\n803.2.6 \u2014 Elbows in Connectors.
803.2.7 \u2014 Common Vent Minimum Size.
803.2.8 \u2014 Tee and Wye Fittings.
803.2.9 \u2014 Size of Fittings.
803.2.10 \u2014 High-Altitude Installations.
803.2.11 \u2014 Connector Rise.
803.2.12 \u2014 Vent Height.
803.2.13 \u2014 Multistory Installations.
803.2.14 \u2014 Size of Vents for Multistory Installations.
803.2.15 \u2014 Vent Type Multistory Installation.
803.2.16 \u2014 Offsets in Multistory Installations.
803.2.17 \u2014 Vertical Vent Size Limitation.
803.2.18 \u2014 Multiple Input Ratings.
803.2.19 \u2014 Corrugated Metallic Chimney LinerReduction.
803.2.20 \u2014 Chimneys and Vents. <\/td>\n<\/tr>\n
198<\/td>\n803.2.21 \u2014 Vent Connector Sizing.
803.2.22 \u2014 Combination of Pipe Types and Sizes.
803.2.23 \u2014 Multiple Connector and Vent Sizes.
803.2.24 \u2014 Interpolation.
803.2.25 \u2014 Extrapolation.
803.2.26 \u2014 Engineering Methods.
803.2.27 \u2014 Height Entries. <\/td>\n<\/tr>\n
199<\/td>\nFigure 803.1.2(6) \u2014 Range of Winter Design Temperatures Used in Analyzing Exterior Masonry Chimneys in The United States [NFPA 54: Figure F.2.4] <\/td>\n<\/tr>\n
200<\/td>\nTable 803.1.2(1) \u2014 Type B Double-Wall Gas Vent [NFPA 54: Table 13.1(a)]* <\/td>\n<\/tr>\n
203<\/td>\nTable 803.1.2(2) \u2014 Type B Double-Wall Gas Vent [NFPA 54: Table 13.1(b)]* <\/td>\n<\/tr>\n
205<\/td>\nTable 803.1.2(3) \u2014 Masonry Chimney [NFPA 54: Table 13.1(c)]* <\/td>\n<\/tr>\n
207<\/td>\nTable 803.1.2(4) \u2014 Masonry Chimney [NFPA 54: Table 13.1(d)]* <\/td>\n<\/tr>\n
209<\/td>\nTable 803.1.2(5) \u2014 Single-Wall Metal Pipe or Type B Asbestos-Cement Vent [NFPA 54: Table 13.1(E)]* <\/td>\n<\/tr>\n
210<\/td>\nTable 803.1.2(6) \u2014 Exterior Masonry Chimney [NFPA 54: Table 13.1(f)] <\/td>\n<\/tr>\n
211<\/td>\nTable 803.2(1) \u2014 Type B Double-Wall Vent [NFPA 54: Table 13.2(a)]* <\/td>\n<\/tr>\n
215<\/td>\nTable 803.2(2) \u2014 Type B Double-Wall Vent [NFPA 54: Table 13.2(b)]* <\/td>\n<\/tr>\n
217<\/td>\nTable 803.2(3) \u2014 Masonry Chimney [NFPA 54: Table 13.2(c)]* <\/td>\n<\/tr>\n
219<\/td>\nTable 803.2(4) \u2014 Masonry Chimney [NFPA 54: Table 13.2(d)]* <\/td>\n<\/tr>\n
221<\/td>\nTable 803.2(5) \u2014 Single-Wall Metal Pipe or Type B Asbestos-Cement Vent [NFPA 54: Table 13.2(e)]*
Table 803.2(6) \u2014 Exterior Masonry Chimney [NFPA 54: Table 13.2(f)]* <\/td>\n<\/tr>\n
222<\/td>\nTable 803.2(7) \u2014 Exterior Masonry Chimney [NFPA 54: Table 13.2(g)] <\/td>\n<\/tr>\n
223<\/td>\nTable 803.2(8) \u2014 Exterior Masonry Chimney [NFPA 54: Table 13.2(h)]* <\/td>\n<\/tr>\n
224<\/td>\nTable 803.2(9) \u2014 Exterior Masonry Chimney [NFPA 54: Table 13.2(i)] <\/td>\n<\/tr>\n
226<\/td>\nChapter 9 \u2014 Installation of Specific Appliances <\/td>\n<\/tr>\n
228<\/td>\n901.0 \u2014 General.
901.1 \u2014 Applicability.
902.0 \u2014 General.
902.1 \u2014 Nonindustrial Appliance.
902.2 \u2014 Combustion Air from Bedroom or Bathroom.
902.3 \u2014 Added or Converted Appliances.
902.4 \u2014 Type of Gas(es).
902.5 \u2014 Safety Shutoff Devices for Unlisted LP-Gas Appliances Used Indoors.
902.6 \u2014 Fuel Input Rate.
902.7 \u2014 Use of Air or Oxygen Under Pressure.
902.8 \u2014 Building Structural Members.
902.8.1 \u2014 Structural Capacity.
902.9 \u2014 Flammable Vapors.
902.10 \u2014 Solid-Fuel Burning Appliances.
902.11 \u2014 Combination of Appliances and Equipment.
902.12 \u2014 Protection of Gas Appliances from Fumes or Gases Other than Products of Combustion. <\/td>\n<\/tr>\n
229<\/td>\n902.13 \u2014 Process Air.
902.14 \u2014 Gas Appliance Pressure Regulators.
902.15 \u2014 Venting of Gas Appliance Pressure Regulators.
902.16 \u2014 Bleed Lines for Diaphragm-Type Valves.
903.0 \u2014 Air-Conditioning Appliances.
903.1 \u2014 Electric Air Conditioners.
903.2 \u2014 Gas-Fired Air Conditioners and Heat Pumps.
903.2.1 \u2014 Independent Gas Piping.
903.2.2 \u2014 Connection of Gas Engine-Powered Air Conditioners.
903.2.3 \u2014 Clearances for Indoor Installation. <\/td>\n<\/tr>\n
230<\/td>\n903.2.4 \u2014 Assembly and Installation.
903.2.5 \u2014 Refrigeration Coils.
903.2.6 \u2014 Switches in Electrical Supply Line.
904.0 \u2014 Central Heating Boilers and Furnaces.
904.1 \u2014 Location.
904.1.1 \u2014 Self-Closing Doors.
904.1.2 \u2014 Gasketing.
904.2 \u2014 Clearance.
904.2.1 \u2014 Listed Units.
904.2.2 \u2014 Unlisted Units.
904.2.3 \u2014 Listed and Unlisted Units.
904.2.4 \u2014 Front Clearance.
904.2.5 \u2014 Adjacent to Plaster or Noncombustible Materials.
904.2.6 \u2014 Interference.
904.2.7 \u2014 Central Heating Furnaces.
904.3 \u2014 Assembly and Installation. <\/td>\n<\/tr>\n
231<\/td>\n904.3.1 \u2014 Under-Floor Installation.
904.3.1.1 \u2014 Supported by Ground.
904.3.1.2 \u2014 Supported from Above.
904.3.1.3 \u2014 Excavation.
904.4 \u2014 Temperature or Pressure Limiting Devices.
904.5 \u2014 Low-Water Cutoff.
904.6 \u2014 Steam Safety and Pressure Relief Valves.
904.6.1 \u2014 Discharge.
904.6.2 \u2014 Size.
904.6.3 \u2014 End Connections.
904.7 \u2014 Refrigeration Coils.
Tables
Table 904.2.2 \u2014 Clearances to Combustible Material for Unlisted Furnaces and Boilers* [NFPA 54: Table 10.3.2.2] <\/td>\n<\/tr>\n
232<\/td>\n904.8 \u2014 Cooling Units Used with Heating Boilers.
904.8.1 \u2014 Exposed to Refrigerated Air Circulation.
904.9 \u2014 Furnace (Upright and Horizontal).
904.10 \u2014 Solid-Fuel-Fired Furnaces.
904.11 \u2014 Oil-Fired Central Furnaces.
904.12 \u2014 Commercial or Industrial Gas Heaters.
904.13 \u2014 Electric Central Furnaces.
905.0 \u2014 Duct Furnaces.
905.1 \u2014 Clearances.
905.2 \u2014 Installation of Duct Furnaces.
905.3 \u2014 Access Panels.
905.4 \u2014 Location of Draft Hoods and Controls.
905.5 \u2014 Circulating Air.
905.6 \u2014 Duct Furnaces Used with Refrigeration Systems.
905.6.1 \u2014 In Conjunction with Cooling Appliances.
905.6.2 \u2014 Located Upstream from Cooling Coils.
905.6.3 \u2014 Heat Exchangers. <\/td>\n<\/tr>\n
233<\/td>\n905.7 \u2014 Installation in Commercial Garages and Aircraft Hangars.
905.8 \u2014 Electric Duct Heaters.
905.8.1 \u2014 Installation.
905.8.2 \u2014 Clearance.
906.0 \u2014 Floor Furnaces.
906.1 \u2014 Installation.
906.2 \u2014 Temperature Limit Controls.
906.3 \u2014 Combustion and Circulating Air.
906.4 \u2014 Placement.
906.5 \u2014 Bracing.
906.6 \u2014 Support.
906.7 \u2014 Clearance.
906.8 \u2014 Access.
906.9 \u2014 Seepage Pan. <\/td>\n<\/tr>\n
234<\/td>\n906.10 \u2014 Wind Protection.
906.11 \u2014 Upper Floor Installations.
906.12 \u2014 First Floor Installation.
906.13 \u2014 Oil-Fired Floor Furnaces.
907.0 \u2014 Wall Furnaces.
907.1 \u2014 Installation.
907.1.1 \u2014 Unlisted Wall Furnaces.
907.1.2 \u2014 Vented Wall Furnaces.
907.1.3 \u2014 Direct Vent Wall Furnaces.
907.1.4 \u2014 Panels, Grilles, and Access Doors
907.2 \u2014 Location.
907.3 \u2014 Combustion and Circulating Air.
907.4 \u2014 Oil-Fired Wall Furnaces.
908.0 \u2014 Clothes Dryers.
908.1 \u2014 Electric Clothes Dryers.
Figures
Figure 907.1.2 \u2014 Installation of Type B-W Gas Vents for Vented Wall Furnaces [NFPA 54: Figure 10.26.1.3] <\/td>\n<\/tr>\n
235<\/td>\n908.2 \u2014 Gas-Fired Clothes Dryers.
908.2.1 \u2014 Clearance.
908.2.2 \u2014 Exhausting to the Outdoors.
908.2.3 \u2014 Multiple-Family or Public Use.
909.0 \u2014 Conversion Burners.
909.1 \u2014 General.
910.0 \u2014 Burner Assemblies.
910.1 \u2014 Oil Burners.
910.2 \u2014 Gas Burners.
911.0 \u2014 Decorative Appliances for Installation in Vented Fireplaces.
911.1 \u2014 Prohibited Installations.
911.2 \u2014 Installation.
911.2.1 \u2014 Listed Decorative Appliance.
911.2.2 \u2014 Reserved.
911.2.3 \u2014 Unlisted Decorative Appliance.
911.3 \u2014 Fireplace Screens.
912.0 \u2014 Gas Fireplaces, Vented.
912.1 \u2014 Reserved.
912.2 \u2014 Installation.
912.3 \u2014 Combustion and Circulating Air. <\/td>\n<\/tr>\n
236<\/td>\n913.0 \u2014 Factory-Built Fireplaces and Fireplace Stoves.
913.1 \u2014 Factory-Built Fireplaces.
913.1.1 \u2014 Gasketed Fireplace Doors.
913.2 \u2014 Fireplace Stoves.
913.3 \u2014 Fireplace Accessories.
914.0 \u2014 Non-Recirculating Direct Gas-Fired Industrial Air Heaters.
914.1 \u2014 Application.
914.2 \u2014 Prohibited Installations.
914.3 \u2014 Installation.
914.3.1 \u2014 Fresh Air Ventilation.
914.3.2 \u2014 Access Required.
914.4 \u2014 Clearance from Combustible Materials.
914.5 \u2014 Air Supply.
914.6 \u2014 Atmospheric Vents, Gas Reliefs, or Bleeds.
914.7 \u2014 Relief Openings.
914.7.1 \u2014 Infiltration Rate.
914.7.2 \u2014 Louver or Gravity Dampers.
Table 911.2 \u2014 Free Opening Area of Chimney Damper for Venting Flue Gases From Unlisted Decorative Appliances for Installation in Vented Fireplaces [NFPA 54: Table 10.6.2.3] <\/td>\n<\/tr>\n
237<\/td>\n914.8 \u2014 Purging.
915.0 \u2014 Recirculating Direct Gas-Fired Industrial Air Heaters.
915.1 \u2014 Application.
915.2 \u2014 Prohibited Installations.
915.3 \u2014 Installation.
915.4 \u2014 Clearance from Combustible Materials.
915.5 \u2014 Air Supply.
915.6 \u2014 Atmospheric Vents, Gas Reliefs, or Bleeds.
915.7 \u2014 Relief Openings.
915.7.1 \u2014 Infiltration Rate.
915.7.2 \u2014 Louver or Gravity Dampers.
915.8 \u2014 Purging.
916.0 \u2014 Room Heaters.
916.1 \u2014 Electric Room Heaters.
916.2 \u2014 Gas-Fired Room Heaters.
916.2.1 \u2014 Prohibited Installations.
916.2.1.1 \u2014 Unvented Room Heaters.
916.2.2 \u2014 Installations in Institutions. <\/td>\n<\/tr>\n
238<\/td>\n916.2.3 \u2014 Clearance.
916.2.4 \u2014 Wall-Type Room Heaters.
916.3 \u2014 Solid-Fuel-Type Room Heaters.
917.0 \u2014 Unit Heaters.
917.1 \u2014 Support.
917.2 \u2014 Clearance.
917.2.1 \u2014 Floor-Mounted-Type Unit Heaters.
917.3 \u2014 Combustion and Circulating Air.
917.4 \u2014 Ductwork.
917.5 \u2014 Installation in Commercial Garages and Aircraft Hangars.
917.6 \u2014 Oil-Fired Unit Heaters.
918.0 \u2014 Food Service Appliance, Floor-Mounted.
918.1 \u2014 Clearance for Listed Appliances.
918.2 \u2014 Clearance for Unlisted Appliances. <\/td>\n<\/tr>\n
239<\/td>\n918.3 \u2014 Mounting on Combustible Floors.
918.3.1 \u2014 Not Listed for Mounting on Combustible Floors.
918.4 \u2014 Installation on Noncombustible Floors.
918.5 \u2014 Combustible Material Adjacent to Cooking Top.
918.6 \u2014 Use with Casters.
918.7 \u2014 Level Installation.
918.8 \u2014 Ventilation.
919.0 \u2014 Food Service Appliances, Counter Appliances.
919.1 \u2014 Vertical Clearance.
919.2 \u2014 Clearance for Listed Appliances.
919.3 \u2014 Clearance for Unlisted Appliances. <\/td>\n<\/tr>\n
240<\/td>\n919.4 \u2014 Mounting of Unlisted Appliances.
920.0 \u2014 Household Cooking Appliances.
920.1 \u2014 Electric Household Cooking Appliances.
920.2 \u2014 Gas-Fired Household Cooking Appliances.
920.3 \u2014 Floor-Mounted Units.
920.3.1 \u2014 Clearance from Combustible Material.
920.3.2 \u2014 Vertical Clearance Above Cooking Top.
920.4 \u2014 Built-In Units.
920.4.1 \u2014 Installation.
920.4.2 \u2014 Vertical Clearance.
920.4.3 \u2014 Level Installation.
921.0 \u2014 Cooking Appliances Listing.
921.1 \u2014 Commercial Electric Ranges. <\/td>\n<\/tr>\n
241<\/td>\n921.2 \u2014 Commercial Wood-Fired Baking Ovens.
921.3 \u2014 Oil-Burning Ranges.
922.0 \u2014 Open-Top Broiler Units.
922.1 \u2014 Listed Units.
922.2 \u2014 Unlisted Units.
922.3 \u2014 Protection Above Domestic Units.
922.4 \u2014 Commercial Units.
923.0 \u2014 Outdoor Cooking Appliances.
923.1 \u2014 Listed Units.
923.2 \u2014 Unlisted Units.
924.0 \u2014 Illuminating Appliances.
924.1 \u2014 Clearances for Listed Appliances.
924.2 \u2014 Clearances for Unlisted Appliances.
924.2.1 \u2014 Open-Flame Type.
924.3 \u2014 Mounting on Buildings.
924.4 \u2014 Mounting on Posts.
Table 924.2.1 \u2014 Clearances for Unlisted Outdoor Open-Flame Illuminating Appliances [NFPA 54: Table 10.15.2.2] <\/td>\n<\/tr>\n
242<\/td>\n924.5 \u2014 Appliance Pressure Regulators.
925.0 \u2014 Incinerators and Crematories.
925.1 \u2014 Field Constructed Commercial-Industrial Incinerators.
925.2 \u2014 Factory-Built Commercial Crematories.
925.3 \u2014 Residential Incinerators.
926.0 \u2014 Infrared Heaters.
926.1 \u2014 Support.
926.2 \u2014 Clearance.
926.3 \u2014 Combustion and Ventilation Air.
926.3.1 \u2014 Exhaust Openings.
926.4 \u2014 Installation in Commercial Garages and Aircraft Hangars.
927.0 \u2014 Pool Heaters.
927.1 \u2014 Location.
927.2 \u2014 Clearance.
927.3 \u2014 Temperature or Pressure-Limiting Devices.
927.3.1 \u2014 Pressure Relief Valve.
927.4 \u2014 Bypass Valves.
927.5 \u2014 Venting.
928.0 \u2014 Refrigerators.
928.1 \u2014 Clearance.
928.2 \u2014 Venting or Ventilating Kits Approved for Use with a Refrigerator. <\/td>\n<\/tr>\n
243<\/td>\n929.0 \u2014 Gas-Fired Toilets.
929.1 \u2014 Clearance.
929.2 \u2014 Installation on Combustible Floors.
929.3 \u2014 Vents.
930.0 \u2014 Appliances for Installation in Manufactured Housing. [Not adopted by HCD]
930.1 \u2014 General. [Not adopted by HCD]
931.0 \u2014 Small Ceramic Kilns.
931.1 \u2014 General.
931.2 \u2014 Installation.
931.3 \u2014 Fuel-Gas Controls.
931.4 \u2014 Electrical Equipment.
931.5 \u2014 Installations Inside Buildings.
931.5.1 \u2014 Kiln Clearances.
931.5.2 \u2014 Hoods.
931.5.3 \u2014 Gravity Ventilation Ducts.
931.5.4 \u2014 Makeup Air.
931.6 \u2014 Exterior Installations.
932.0 \u2014 Outdoor Open Flame Decorative Appliances.
932.1 \u2014 General.
932.1.1 \u2014 Listed Units.
932.1.2 \u2014 Unlisted Units. <\/td>\n<\/tr>\n
244<\/td>\n932.1.3 \u2014 Connection to the Piping System.
933.0 \u2014 Evaporative Cooling Systems.
933.1 \u2014 General.
933.2 \u2014 Location.
933.3 \u2014 Access, Inspection, and Repair.
933.4 \u2014 Installation.
933.4.1 \u2014 Modifications to the Supporting Structure.
933.4.2 \u2014 On the Ground.
933.4.3 \u2014 On a Platform.
934.0 \u2014 Refrigeration Appliances.
934.1 \u2014 Self-Contained Refrigerators and Freezers.
934.2 \u2014 Unit Coolers.
934.3 \u2014 Self-Contained Mechanical Refrigeration Systems.
935.0 \u2014 Ductless Mini-Split Systems Installation.
935.1 \u2014 General.
936.0 \u2014 Air Filter Appliances.
936.1 \u2014 Electrostatic Air Cleaners.
936.2 \u2014 High-Efficiency Particulate Air Filter Units.
937.0 \u2014 Gaseous Hydrogen Systems.
937.1 \u2014 General.
938.0 \u2014 Compressed Natural Gas (CNG) Vehicular Fuel Systems.
938.1 General. <\/td>\n<\/tr>\n
246<\/td>\nChapter 10 \u2014 Boilers and Pressure Vessels <\/td>\n<\/tr>\n
248<\/td>\n1001.0 \u2014 General.
1001.1 \u2014 Applicability.
1001.2 \u2014 Boiler Rooms and Enclosures.
1001.2.1 [OSHPD 1, 1R, 2, 3, 4 & 5] In no case shall boiler room volume or clearances be reduced below those required by the conditions of the boiler listing.
1001.3 \u2014 Air for Combustion and Ventilation.
1001.4 \u2014 Drainage.
1001.5 \u2014 Mounting.
1001.5.1 \u2014 Floors.
1001.6 \u2014 Chimneys or Vents.
1002.0 \u2014 Standards.
1002.1 \u2014 General.
1002.2 \u2014 Oil-Burning Boilers.
1002.2.1 \u2014 Listing & Labeling.
1002.2.2 \u2014 Installation.
1002.3 \u2014 Electric Boilers.
1002.4 \u2014 Solid-Fuel-Fired Boilers.
1002.5 \u2014 Dual Purpose Water Heater.
1003.0 \u2014 Detailed Requirements.
1003.1 \u2014 Safety Requirements. <\/td>\n<\/tr>\n
249<\/td>\n1003.2 \u2014 Controls.
1003.2.1 \u2014 Automatic Boilers.
1003.3 \u2014 Gauges.
1003.4 \u2014 Stack Dampers.
1003.5 \u2014 Welding.
1004.0 \u2014 Expansion Tanks.
1004.1 \u2014 General.
1004.2 \u2014 Open-Type Expansion Tanks.
1004.3 \u2014 Closed-Type Systems.
1004.4 \u2014 Minimum Capacity of Closed-Type Tank.
Tables
Table 1004.4(1) \u2014 Expansion Tank Capacities for Gravity Hot Water Systems <\/td>\n<\/tr>\n
250<\/td>\n1005.0 \u2014 Safety or Relief Valve Discharge.
1005.1 \u2014 General.
1005.2 \u2014 Discharge Piping.
1005.3 \u2014 Splash Shield.
1005.4 \u2014 Hazardous Discharge.
1005.5 \u2014 Vacuum Relief Valve.
1006.0 \u2014 Shutoff Valves.
1006.1 \u2014 General.
1007.0 \u2014 Gas-Pressure Regulators.
1007.1 \u2014 General.
1008.0 \u2014 Low-Water Cutoff.
1008.1 \u2014 General.
1009.0 \u2014 Combustion Regulators \u2013 Safety Valves.
1009.1 \u2014 General.
Table 1004.4(2) \u2014 Expansion Tank Capacities for Forced Hot Water Systems <\/td>\n<\/tr>\n
251<\/td>\n1010.0 \u2014 Clearance for Access.
1010.1 \u2014 General.
1010.2 \u2014 Power Boilers.
1010.3 \u2014 Steam-Heating Boilers, Hot Water Boilers, and Power Boilers.
1010.4 \u2014 Package Boilers, Steam-Heating Boilers, and Hot-Water-Heating Boilers.
1011.0 \u2014 Boilers, Stokers, and Steam Generators.
1011.1 \u2014 General.
1012.0 \u2014 Operating Adjustments and Instructions.
1012.1 \u2014 General.
1013.0 \u2014 Inspections and Tests.
1013.1 \u2014 General.
1013.2 \u2014 Operating Permit.
1013.3 \u2014 Maintenance Inspection.
1013.4 \u2014 Power and Miniature Boilers. <\/td>\n<\/tr>\n
252<\/td>\n1013.5 \u2014 Steam-Heating and Water-Heating Boilers.
1013.6 \u2014 Automatic Steam-Heating Boilers.
1013.7 \u2014 Unfired Pressure Vessels.
1014.0 \u2014 Operation and Maintenance of Boilers and Pressure Vessels.
1014.1 \u2014 General. <\/td>\n<\/tr>\n
253<\/td>\nTable 1003.2.1 \u2014 Controls and Limit Devices for Automatic Boilers <\/td>\n<\/tr>\n
256<\/td>\nChapter 11 \u2014 Refrigeration <\/td>\n<\/tr>\n
258<\/td>\n1101.0 \u2014 General.
1101.1 \u2014 Applicability.
1101.2 \u2014 Equipment.
Part I \u2013 Refrigeration Systems.
1102.0 \u2014 Refrigeration Systems.
1102.1 \u2014 General.
1102.2 \u2014 Ammonia Refrigeration Systems.
1102.3 \u2014 Refrigerants.
1103.0 \u2014 Classification.
1103.1 \u2014 Classification of Refrigerants.
1103.1.1 \u2014 Safety Group.
1103.2 \u2014 Classification of Refrigeration Systems.
1103.2.1 \u2014 High-Probability System.
1103.2.2 \u2014 Low-Probability System.
1103.3 \u2014 Higher Flammability Refrigerants.
1104.0 \u2014 Requirements for Refrigerant and Refrigeration System Use.
1104.1 \u2014 System Selection.
1104.2 \u2014 Refrigerant Concentration Limit. <\/td>\n<\/tr>\n
259<\/td>\n1104.2.1 \u2014 Volume Calculations.
1104.2.2 \u2014 Nonconnecting Spaces.
1104.2.3 \u2014 Ventilated Spaces.
1104.2.3.1 \u2014 Closures.
1104.2.3.2 \u2014 Plenums.
1104.2.3.3 \u2014 Supply and Return Ducts.
1104.3 \u2014 Institutional Occupancies.
1104.4 \u2014 Industrial Occupancies and Refrigerated Rooms.
1104.5 \u2014 Flammable Refrigerants.
1104.6 \u2014 Applications for Human Comfort and for Nonindustrial Occupancies. <\/td>\n<\/tr>\n
260<\/td>\n1104.7 \u2014 Refrigerant Type and Purity.
1104.7.1 \u2014 Recovered Refrigerants.
1104.7.2 \u2014 Recycled Refrigerants.
1104.7.3 \u2014 Reclaimed Refrigerants.
1104.7.4 \u2014 Mixing.
1104.8 \u2014 Changing Refrigerants.
1105.0 \u2014 General Requirements.
1105.1 \u2014 Human Comfort.
1105.2 \u2014 Supports and Anchorage.
1105.3 \u2014 Access.
1105.4 \u2014 Illumination and Service Receptacles. <\/td>\n<\/tr>\n
261<\/td>\n1105.5 \u2014 Ventilation of Rooms Containing Condensing Units.
1105.5.1 \u2014 Permanent Gravity Ventilation Openings.
1105.5.2 \u2014 Mechanical Exhaust System.
1105.6 \u2014 Prohibited Locations.
1105.7 \u2014 Condensate.
1105.8 \u2014 Defrost.
1105.9 \u2014 Overflows.
1105.10 \u2014 Condensate, Defrost, and Overflow Disposal.
1105.11 \u2014 Refrigerant Port Protection.
1105.12 \u2014 Storage.
1105.12.1 \u2014 Quantity.
1106.0 \u2014 Refrigeration Machinery Rooms.
1106.1 \u2014 Where Required.
1106.1.1 \u2014 Quantity.
1106.1.2 \u2014 Equipment.
1106.1.3 \u2014 A1 System.
1106.1.4 \u2014 A1 Refrigerant. <\/td>\n<\/tr>\n
262<\/td>\n1106.2 \u2014 Refrigeration Machinery Room, General Requirements.
1106.2.1 \u2014 Access.
1106.2.2 \u2014 Openings.
1106.2.2.1 \u2014 Detectors and Alarms.
1106.2.2.2 \u2014 Refrigerant Detectors.
1106.2.3 \u2014 Mechanical Ventilation.
1106.2.4 \u2014 Ventilation.
1106.2.5 \u2014 Emergency Ventilation-Required Airflow.
1106.2.5.1 \u2014 Ventilation – A1, A2, A3, B1, B2L, B2 and B3 refrigerants. <\/td>\n<\/tr>\n
263<\/td>\n1106.2.5.2 \u2014 Ventilation – Group A2L Refrigerants.
1106.3 \u2014 Normal Operation.
1106.4 \u2014 Natural Ventilation.
1106.5 \u2014 Combustion Air.
1106.6 \u2014 Airflow.
1106.7 \u2014 Ventilation Intake.
Tables
Table 1106.2.5.2 \u2014 Required Airflow for Group A2L Refrigerants <\/td>\n<\/tr>\n
264<\/td>\n1106.8 \u2014 Maximum Temperature.
1106.9 \u2014 Refrigerant Parts in Air Duct.
1106.10 \u2014 Dimensions.
1106.11 \u2014 Restricted Access.
1106.12 \u2014 Exits.
1107.0 \u2014 Machinery Room, Special Requirements.
1107.1 \u2014 General.
1107.1.1 \u2014 Flame-Producing Devices.
1107.1.2 \u2014 Doors.
1107.1.3 \u2014 Walls, Floors, and Ceilings.
1107.1.4 \u2014 Machinery Rooms.
1107.1.5 \u2014 Exterior Openings.
1107.1.6 \u2014 Sealing.
1107.1.7 \u2014 Group A2L and B2L Refrigerants.
1107.1.7.1 \u2014 Mechanical Ventilation.
1107.1.7.2 \u2014 Refrigeration Detectors.
1107.1.7.3 \u2014 Machinery Rooms.
1107.1.8 \u2014 Group A2, A3, B2, or B3 Refrigerants.
1107.1.9 \u2014 Refrigeration Systems.
1107.1.10 \u2014 Remote Control.
1108.0 \u2014 Refrigeration Machinery Room Equipment and Controls.
1108.1 \u2014 General.
1108.2 \u2014 Electrical. <\/td>\n<\/tr>\n
265<\/td>\n1108.3 \u2014 Emergency Shut-off.
1108.4 \u2014 Installation, Maintenance, and Testing.
1108.5 \u2014 Emergency Pressure Control System.
1109.0 \u2014 Refrigeration Piping, Containers, and Valves.
1109.1 \u2014 Materials.
1109.1.1 \u2014 Copper and Copper Alloy Pipe.
1109.1.2 \u2014 Copper Linesets.
1109.1.3 \u2014 Iron and Steel.
1109.1.4 \u2014 Prohibited Contact.
1109.2 \u2014 Joints.
1109.3 \u2014 Penetration of Piping.
1109.4 \u2014 Location of Refrigeration Piping.
1109.4.1 \u2014 Protection from Mechanical Damage.
1109.5 \u2014 Underground Piping.
1109.5.1 \u2014 Piping in Concrete Floors.
1109.6 \u2014 Support. <\/td>\n<\/tr>\n
266<\/td>\n1109.7 \u2014 Pipe Enclosure.
1109.8 \u2014 Visual Inspection.
1109.9 \u2014 Condensation.
1109.10 \u2014 Identification.
1110.0 \u2014 Valves.
1110.1 \u2014 More than 6.6 Pounds of Refrigerant.
1110.2 \u2014 More than 110 Pounds of Refrigerant.
1110.3 \u2014 Support.
1110.4 \u2014 Access.
1110.5 \u2014 Identification.
1111.0 \u2014 Pressure-Limiting Devices.
1111.1 \u2014 Where Required.
1111.2 \u2014 Setting. <\/td>\n<\/tr>\n
267<\/td>\n1111.3 \u2014 Location.
1111.4 \u2014 Emergency Stop.
1112.0 \u2014 Pressure-Relief Devices.
1112.1 \u2014 General.
1112.2 \u2014 Positive Displacement Compressor.
1112.3 \u2014 Liquid-Containing Portions of Systems.
1112.4 \u2014 Evaporators.
1112.5 \u2014 Hydrostatic Expansion.
1112.5.1 \u2014 Hydrostatic Expansion During Normal Operation. <\/td>\n<\/tr>\n
268<\/td>\n1112.5.2 \u2014 Hydrostatic Expansion During Maintenance.
1112.6 \u2014 Actuation.
1112.7 \u2014 Stop Valves Prohibited.
1112.8 \u2014 Location.
1112.9 \u2014 Materials.
1112.10 \u2014 Pressure-Relief Device Settings.
1112.10.1 \u2014 Rupture Member Setting.
1112.11 \u2014 Discharge from Pressure-Relief Devices.
1112.11.1 \u2014 Discharging Location Interior to Building.
1112.11.2 \u2014 Discharging Location Exterior to Building. <\/td>\n<\/tr>\n
269<\/td>\n1112.11.3 \u2014 Internal Relief.
1112.11.4 \u2014 Discharge Location, Special Requirements.
1112.11.4.1 \u2014 Water (R-718).
1112.12 \u2014 Discharge Piping.
1112.12.1 \u2014 Piping Connection.
1112.12.2 \u2014 Pipe Size.
1112.12.3 \u2014 Maximum Length.
1112.12.4 \u2014 Design Back Pressure.
Table 1112.12.3 \u2014 Atmospheric Pressure at Nominal Installation Elevation (Pa) [ASHRAE 15: Table 9.7.9.3.2] <\/td>\n<\/tr>\n
270<\/td>\n1112.12.5 \u2014 Simultaneous Operation.
1112.13 \u2014 Rating of Pressure-Relief Device.
1112.14 \u2014 Rating of Rupture Members and Fusible Plugs.
1113.0 \u2014 Overpressure Protection.
1113.1 \u2014 General.
1113.2 \u2014 Type of Protection.
1113.3 \u2014 Discharging into Lowside of System.
1113.4 \u2014 Parallel Pressure-Relief Devices.
1113.5 \u2014 Discharge Capacity. <\/td>\n<\/tr>\n
271<\/td>\n1113.6 \u2014 Three-Way Valve.
1114.0 \u2014 Special Discharge Requirements.
1114.1 \u2014 General.
1114.2 \u2014 Design Requirements.
1114.3 \u2014 Testing.
1115.0 \u2014 Labeling and Identification.
1115.1 \u2014 General.
1115.2 \u2014 Volume and Type.
1115.3 \u2014 Permanent Sign.
Table 1113.5 \u2014 Relief Devices Capacity Factor [ASHRAE 15: Table 9.75] <\/td>\n<\/tr>\n
272<\/td>\n1115.4 \u2014 Marking of Pressure-Relief Devices.
1115.4.1 \u2014 Rupture Members.
1115.4.2 \u2014 Fusible Plugs.
1116.0 \u2014 Testing of Refrigeration Equipment.
1116.1 \u2014 Factory Tests.
1116.1.1 \u2014 Testing Procedure.
1116.1.2 \u2014 Applied Pressure.
1116.1.3 \u2014 Design Pressure of 15 psig or Less.
1116.2 \u2014 Field Tests.
1116.3 \u2014 Test Gases.
Table 1116.2\u2014 Field Leak Test Pressures (psig)* <\/td>\n<\/tr>\n
273<\/td>\n1116.4 \u2014 Declaration.
1116.5 \u2014 Brine Systems.
1117.0 \u2014 Refrigerant-Containing Pressure Vessels.
1117.1 \u2014 Inside Dimensions 6 Inches or Less.
1117.1.1 \u2014 Pressure-Relief Device.
1117.1.2 \u2014 Fusible Plug.
1117.2 \u2014 Inside Dimensions More than 6 Inches.
1117.3 \u2014 Pressure Vessels for 15 psig or Less.
1118.0 \u2014 Maintenance and Operation.
1118.1 \u2014 General.
Part II \u2013 Cooling Towers.
1119.0 \u2014 General.
1119.1 \u2014 Applicability.
1120.0 \u2014 Support and Anchorage.
1120.1 \u2014 General.
1121.0 \u2014 Drainage.
1121.1 \u2014 General.
1122.0 \u2014 Chemical Treatment Systems.
1122.1 \u2014 General. <\/td>\n<\/tr>\n
274<\/td>\n1122.2 \u2014 Automated Control of Cycles of Concentration.
1123.0 \u2014 Location.
1123.1 \u2014 General.
1124.0 \u2014 Electrical.
1124.1 \u2014 General.
1125.0 \u2014 Refrigerants and Hazardous Fluids.
1125.1 \u2014 General.
1126.0 \u2014 Drift Eliminators.
1126.1 \u2014 General. <\/td>\n<\/tr>\n
275<\/td>\nTable 1102.3 \u2014 Refrigerant Groups, Properties, and Allowable Quantities [ASHRAE 34: TABLE 4-1, Table 4-2] <\/td>\n<\/tr>\n
280<\/td>\nTable 1104.1 \u2014 Permissible Refrigeration Systems <\/td>\n<\/tr>\n
282<\/td>\nChapter 12 \u2014 Hydronics <\/td>\n<\/tr>\n
284<\/td>\n1201.0 \u2014 General.
1201.1 \u2014 Applicability.
1201.2 \u2014 Insulation.
1201.3 \u2014 Water Hammer.
1201.4 \u2014 Terminal Units.
1201.5 \u2014 Return-Water Low-Temperature Protection.
1202.0 \u2014 Protection of Potable Water Supply.
1202.1 \u2014 Prohibited Sources.
1202.2 \u2014 Chemical Injection.
1202.3 \u2014 Compatibility.
1203.0 \u2014 Capacity of Heat Source.
1203.1 \u2014 Heat Source.
1203.2 \u2014 Dual Purpose Water Heater.
1203.3 \u2014 Tankless Water Heaters.
1204.0 \u2014 Identification of a Potable and Nonpotable Water System.
1204.1 \u2014 General.
1204.2 \u2014 Color and Information.
1204.3 \u2014 Potable Water.
1204.4 \u2014 Nonpotable Water.
Tables
Table 1203.2 \u2014 Water Heaters <\/td>\n<\/tr>\n
285<\/td>\n1204.5 \u2014 Location of Piping Identification.
1204.6 \u2014 Flow Directions.
1205.0 \u2014 Installation, Testing, and Inspection.
1205.1 \u2014 Operating Instructions.
1205.2 \u2014 Pressure Testing.
1205.3 \u2014 Flushing.
1206.0 \u2014 Pressure and Safety Devices.
1206.1 \u2014 General.
1206.2 \u2014 Discharge Piping.
1207.0 \u2014 Heating Appliances and Equipment.
1207.1 \u2014 General.
1207.2 \u2014 Boilers.
1207.2.1 \u2014 Condensing Boilers.
1207.2.2 \u2014 Noncondensing Boilers.
1207.3 \u2014 Dual-Purpose Water Heaters.
Table 1204.3 \u2014 Minimum Length of Color Field and Size Letters <\/td>\n<\/tr>\n
286<\/td>\n1207.3.1 \u2014 Temperature Limitations.
1207.4 \u2014 Solar Heat Collector Systems.
1208.0 \u2014 Circulators and Pumps.
1208.1 \u2014 General.
1208.2 \u2014 Mounting.
1208.3 \u2014 Sizing.
1209.0 \u2014 Expansion Tanks.
1209.1 \u2014 General.
1209.2 \u2014 Installation.
1209.3 \u2014 Open-Type Expansion Tanks.
1209.4 \u2014 Closed-Type Tanks.
1209.5 \u2014 Sizing.
1210.0 \u2014 Materials.
1210.1 \u2014 Piping, Tubing, and Fittings.
1210.2 \u2014 Expansion and Contraction.
1210.3 \u2014 Hangers and Supports.
1210.4 \u2014 Oxygen Diffusion Corrosion.
1211.0 \u2014 Joints and Connections.
1211.1 \u2014 General. <\/td>\n<\/tr>\n
287<\/td>\n1211.2 \u2014 Chlorinated Polyvinyl Chloride (CPVC) Pipe.
Table 1210.1 \u2014 Materials for Hydronic System Piping, Tubing, and Fittings <\/td>\n<\/tr>\n
288<\/td>\n1211.3 \u2014 CPVC\/AL\/CPVC Plastic Pipe and Joints.
1211.4 \u2014 Copper or Copper Alloy Pipe and Tubing. <\/td>\n<\/tr>\n
289<\/td>\n1211.5 \u2014 Cross-Linked Polyethylene (PEX) Pipe.
1211.6 \u2014 Cross-Linked Polyethylene\/Aluminum\/Cross-Linked Polyethylene (PEX-AL-PEX) Pipe.
1211.7 \u2014 Ductile Iron Pipe.
1211.8 \u2014 Polyethylene (PE) Plastic Pipe\/Tubing.
1211.9 \u2014 Polyethylene\/Aluminum\/Polyethylene (PE-ALPE). <\/td>\n<\/tr>\n
290<\/td>\n1211.10 \u2014 Polyethylene of Raised Temperature (PE-RT).
1211.11 \u2014 Polypropylene (PP) Pipe.
1211.12 \u2014 Polyvinyl Chloride (PVC) Pipe.
1211.13 \u2014 Steel Pipe and Tubing.
1211.14 \u2014 Joints Between Various Materials.
1211.14.1 \u2014 Copper or Copper Alloy Pipe or Tubing to Threaded Pipe Joints. <\/td>\n<\/tr>\n
291<\/td>\n1211.14.2 \u2014 Plastic Pipe to Other Materials.
1212.0 \u2014 Valves.
1212.1 \u2014 General.
1212.2 \u2014 Where Required.
1212.3 \u2014 Heat Exchanger.
1212.4 \u2014 Pressure Vessels.
1212.5 \u2014 Pressure Reducing Valves.
1212.6 \u2014 Equipment, Components, and Appliances.
1212.7 \u2014 Expansion Tank.
1212.8 \u2014 Flow Balancing Valves.
1212.9 \u2014 Mixing or Temperature Control Valves.
1212.10 \u2014 Thermosiphoning.
1212.11 \u2014 Air Removal Device or Air Vents.
1213.0 \u2014 System Controls.
1213.1 \u2014 Water Temperature Controls.
1213.2 \u2014 Operating Steam Controls.
1213.2.1 \u2014 Water-Level Controls.
1213.3 \u2014 Occupied Spaces.
1213.4 \u2014 Simultaneous Operation.
1213.5 \u2014 Temperature Reading.
1214.0 \u2014 Pressure and Flow Controls.
1214.1 \u2014 Balancing.
1214.2 \u2014 Low-Water Control.
1214.3 \u2014 Flow-Sensing Devices.
1214.4 \u2014 Automatic Makeup Fluid.
1214.5 \u2014 Differential Pressure Regulation. <\/td>\n<\/tr>\n
292<\/td>\n1214.5.1 \u2014 Differential Pressure Bypass Valve.
1214.6 \u2014 Air-Removal Device.
1214.7 \u2014 Air-Separation Device.
1214.8 \u2014 Secondary Loops.
1215.0 \u2014 Hydronic Space Heating.
1215.1 \u2014 General.
1215.2 \u2014 Installation.
1215.3 \u2014 Freeze Protection.
1215.4 \u2014 Balancing.
1215.5 \u2014 Heat Transfer Fluid.
1216.0 \u2014 Steam Systems.
1216.1 \u2014 Steam Traps.
1216.2 \u2014 Sloping for Two-Pipe System.
1216.3 \u2014 Sloping for One-Pipe System.
1216.4 \u2014 Automatic Air Vents.
1216.5 \u2014 Condensate Flow.
1216.6 \u2014 Steam-Distribution Piping.
1217.0 \u2014 Radiant Heating and Cooling.
1217.1 \u2014 Installation.
1217.1.1 \u2014 Manifolds.
1217.2 \u2014 Radiant Under-Floor Heating.
1217.3 \u2014 Radiant Cooling Systems.
1217.4 \u2014 Tube Placement. <\/td>\n<\/tr>\n
293<\/td>\n1217.5 \u2014 Poured Floor Structural Concrete Slab Systems (Thermal Mass).
1217.5.1 \u2014 Slab Penetration Tube and Joint Protection.
1217.5.2 \u2014 Insulation.
1217.5.2.1 \u2014 California Energy Code Insulation Requirements for Heated Slab Floors.
1217.5.3 \u2014 Types of Tube Fasteners.
1217.5.4 \u2014 Spacing of Tube Fasteners.
1217.6 \u2014 Joist Systems and Subfloors.
1217.6.1 \u2014 Tubing Fasteners.
1217.7 \u2014 Wall and Ceiling Panels.
Table 1217.4 \u2014 Maximum Length of Continuous Tubing From a Supply-and-Return Manifold Arrangement <\/td>\n<\/tr>\n
294<\/td>\n1217.7.1 \u2014 California Energy Code Pipe Insulation Requirements.
1217.8 \u2014 Radiant Heating and Cooling Panels.
1217.8.1 \u2014 Electric Heating Panel Systems.
1217.8.2 \u2014 Radiant Wall and Ceiling Panels.
1218.0 \u2014 Heat Exchangers.
1218.1 \u2014 General.
1219.0 \u2014 Indirect-Fired Domestic Hot-Water Storage Tanks.
1219.1 \u2014 General.
1220.0 \u2014 Snow and Ice Melt Systems.
1220.1 \u2014 Use of Chemical Additives and Corrosive Fluids.
1220.2 \u2014 Types of Tube Fasteners.
1220.3 \u2014 Spacing of Tube Fasteners. <\/td>\n<\/tr>\n
295<\/td>\n1220.4 \u2014 Snow and Ice Melt Controls.
1220.4.1 \u2014 Tube Placement.
1220.4.2 \u2014 Poured Structural Concrete Slab Systems.
1220.4.3 \u2014 Slab Penetration Tube and Joint Protection.
1220.4.4 \u2014 Concrete Slab Preparation.
1220.4.5 \u2014 Insulation.
1220.4.5.1 \u2014 California Energy Code Insulation Requirements for Heated Slab Floors.
1220.4.6 \u2014 Testing and Flushing.
1220.5 \u2014 Hydronic Makeup Air Units.
1221.0 \u2014 Piping Installation.
1221.1 \u2014 General.
1221.2 \u2014 Embedded Piping Materials and Joints.
1221.2.1 \u2014 Steel Pipe.
1221.2.2 \u2014 Copper Tubing.
1221.2.3 \u2014 Plastics.
Table 1220.4.1 \u2014 Loop Lengths for Snow and Ice Melt Systems <\/td>\n<\/tr>\n
296<\/td>\n1221.3 \u2014 Pressure Testing.
1221.4 \u2014 System Drainage.
1221.5 \u2014 Condensate Drainage.
1221.6 \u2014 Clearance to Combustibles. <\/td>\n<\/tr>\n
298<\/td>\nChapter 13 \u2014 Fuel Gas Piping <\/td>\n<\/tr>\n
300<\/td>\n1301.0 \u2014 Scope of Gas Piping.
1301.1 \u2014 Applicability.
1302.0 \u2014 Coverage of Piping System.
1302.1 \u2014 General.
1302.2 \u2014 Piping System Requirements.
1302.3 \u2014 Applications.
1303.0 \u2014 Inspection.
1303.1 \u2014 Inspection Notification.
1303.2 \u2014 Excavation.
1303.3 \u2014 Type of Inspections.
1303.3.1 \u2014 Rough Piping Inspection.
1303.3.2 \u2014 Final Piping Inspection. <\/td>\n<\/tr>\n
301<\/td>\n1303.3.3 \u2014 Test Gauges.
1303.3.3.1 \u2014 Pressure Tests (10 psi or less).
1303.3.3.2 \u2014 Pressure Tests (greater than 10psi to 100 psi).
1303.3.3.3 \u2014 Pressure Tests (exceeding 100 psi).
1303.3.3.4 \u2014 Pressure Range.
1303.4 \u2014 Inspection Waived.
1304.0 \u2014 Certificate of Inspection.
1304.1 \u2014 Issuance.
1304.2 \u2014 Gas Supplier.
1304.3 \u2014 Unlawful.
1305.0 \u2014 Authority to Render Gas Service.
1305.1 \u2014 Authorized Personnel.
1305.2 \u2014 Outlets.
1306.0 \u2014 Authority to Disconnect.
1306.1 \u2014 Disconnection.
1306.2 \u2014 Notice.
1306.3 \u2014 Capped Outlets.
1307.0 \u2014 Temporary Use of Gas.
1307.1 \u2014 General.
1308.0 \u2014 Gas Piping System Design, Materials, and Components.
1308.1 \u2014 Installation of Piping System.
1308.1.1 \u2014 Addition to Existing System.
1308.2 \u2014 Provision for Location of Point of Delivery.
1308.3 \u2014 Interconnections Between Gas Piping Systems.
1308.3.1 \u2014 Interconnections for Standby Fuels. <\/td>\n<\/tr>\n
302<\/td>\n1308.4 \u2014 Sizing of Gas Piping Systems.
1308.4.1 \u2014 Maximum Gas Demand.
1308.4.2 \u2014 Sizing Methods.
1308.4.3 \u2014 Allowable Pressure Drop.
1308.5 \u2014 Acceptable Piping Materials and Joining Methods.
1308.5.1 \u2014 Used Materials.
1308.5.1.1 \u2014 Other Materials.
1308.5.2 \u2014 Metallic Pipe.
1308.5.2.1 \u2014 Steel, Stainless Steel, and Wrought-Iron.
1308.5.2.2 \u2014 Copper and Copper Alloy Pipe.
Tables
Table 1308.4.1 \u2014 Approximate Gas Input for Typical Appliances [NFPA 54: Table A.5.4.2.1] <\/td>\n<\/tr>\n
303<\/td>\n1308.5.2.3 \u2014 Aluminum Alloy Pipe.
1308.5.3 \u2014 Metallic Tubing.
1308.5.3.1 \u2014 Stainless Steel Tubing.
1308.5.3.2 \u2014 Steel Tubing.
1308.5.3.3 \u2014 Copper and Copper Alloy Tubing.
1308.5.3.4 \u2014 Aluminum Alloy Tubing.
1308.5.3.5 Corrugated Stainless Steel Tubing.
1308.5.4 \u2014 Plastic Pipe, Tubing, and Fittings.
1308.5.4.1 \u2014 Regulator Vent Piping.
1308.5.4.2 \u2014 Anodeless Risers.
1308.5.4.2.1 \u2014 Factory-Assembled Anodeless Risers.
1308.5.4.2.2 \u2014 Service Head Adapters and Field-Assembled Anodeless Risers.
1308.5.4.2.3 \u2014 Undiluted Liquefied Petroleum Gas Piping.
1308.5.5 \u2014 Workmanship and Defects.
1308.5.6 \u2014 Metallic Pipe Threads.
1308.5.6.1 \u2014 Damaged Threads.
1308.5.6.2 \u2014 Number of Threads.
Table 1308.5.6.2 \u2014 Specifications for Threading Metallic Pipe [NFPA 54: Table 5.6.6.3] <\/td>\n<\/tr>\n
304<\/td>\n1308.5.6.3 \u2014 Thread Joint Compounds.
1308.5.7 \u2014 Metallic Piping Joints and Fittings.
1308.5.7.1 \u2014 Pipe Joints.
1308.5.7.2 \u2014 Copper Tubing Joints.
1308.5.7.3 \u2014 Stainless Steel Tubing Joints.
1308.5.7.4 \u2014 Flared Joints.
1308.5.7.5 \u2014 Metallic Pipe Fittings.
1308.5.8 \u2014 Plastic Piping, Joints, and Fittings. <\/td>\n<\/tr>\n
305<\/td>\n1308.5.8.1 \u2014 Joint Design.
1308.5.8.2 \u2014 Heat Fusion Joint.
1308.5.8.3 \u2014 Compression-Type Mechanical Joints.
1308.5.8.4 \u2014 Liquefied Petroleum Gas Piping Systems.
1308.5.9 \u2014 Flange Specifications.
1308.5.9.1 \u2014 Steel Flanges.
1308.5.9.2 \u2014 Non-Ferrous Flanges.
1308.5.9.3 \u2014 Ductile Iron Flanges.
1308.5.9.4 \u2014 Dissimilar Flange Connections.
1308.5.9.5 \u2014 Flange Facings.
1308.5.9.6 \u2014 Lapped Flanges.
1308.5.10 \u2014 Flange Gaskets.
1308.5.10.1 \u2014 Flange Gasket Materials.
1308.5.10.2 \u2014 Metallic Flange Gaskets.
1308.5.10.3 \u2014 Non-Metallic Flange Gaskets.
1308.5.10.4 \u2014 Full-Face Flange Gasket.
1308.5.10.5 \u2014 Separated Flanges.
1308.6 \u2014 Gas Meters.
1308.6.1 \u2014 Location.
1308.6.1.1 \u2014 Subject to Damage.
1308.6.1.2 \u2014 Extreme Temperatures.
1308.6.2 \u2014 Supports.
1308.6.3 \u2014 Meter Protection. <\/td>\n<\/tr>\n
306<\/td>\n1308.6.4 \u2014 Identification.
1308.7 \u2014 Gas Pressure Regulators.
1308.7.1 \u2014 Listing.
1308.7.2 \u2014 Location.
1308.7.3 \u2014 Regulator Protection.
1308.7.4 \u2014 Venting of Line Pressure Regulators.
1308.7.5 \u2014 Venting of Gas Appliance Pressure Regulators.
1308.7.6 \u2014 Bypass Piping.
1308.7.7 \u2014 Identification.
1308.8 \u2014 Overpressure Protection.
1308.9 \u2014 Pressure Limitation Requirements.
1308.9.1 \u2014 Overpressure Protection Required.
1308.9.2 \u2014 Overpressure Protection Devices.
1308.9.3 \u2014 Detection of Failure.
1308.9.4 \u2014 Flow Capacity. <\/td>\n<\/tr>\n
307<\/td>\n1308.10 \u2014 Overpressure Protection Devices.
1308.10.1 \u2014 Separate Devices.
1308.10.2 \u2014 Construction and Installation.
1308.10.3 \u2014 External Control Piping.
1308.10.4 \u2014 Setting.
1308.10.5 \u2014 Unauthorized Operation.
1308.10.6 \u2014 Discharge of Vents.
1308.10.7 \u2014 Size of Fittings, Pipe, and Openings.
1308.11 \u2014 Backpressure Protection.
1308.11.1 \u2014 Protective Devices.
1308.12 \u2014 Low-Pressure Protection.
1308.13 \u2014 Shutoff Valves.
1308.14 \u2014 Expansion and Flexibility.
1308.14.1 \u2014 Special Local Conditions. <\/td>\n<\/tr>\n
308<\/td>\n1309.0 \u2014 Excess Flow Valve.
1309.1 \u2014 General.
1310.0 \u2014 Gas Piping Installation.
1310.1 \u2014 Piping Underground.
1310.1.1 \u2014 Cover Requirements.
1310.1.2 \u2014 Trenches.
1310.1.2.1 \u2014 Backfilling.
1310.1.3 \u2014 Protection Against Corrosion.
1310.1.3.1 \u2014 Zinc Coating.
1310.1.3.2 \u2014 Underground Piping.
1310.1.3.3 \u2014 Cathodic Protection.
1310.1.3.4 \u2014 Sacrificial Anodes.
1310.1.3.5 \u2014 System Failing Tests.
1310.1.3.6 \u2014 Impressed Current Cathodic Protection.
1310.1.3.7 \u2014 Documentation.
1310.1.3.8 \u2014 Dissimilar Metals.
1310.1.3.9 \u2014 Steel Risers. <\/td>\n<\/tr>\n
309<\/td>\n1310.1.4 \u2014 Protection Against Freezing.
1310.1.5 \u2014 Piping Through Foundation Wall.
1310.1.6 \u2014 Piping Underground Beneath Buildings.
1310.1.6.1 \u2014 Conduit with One End Terminating Outdoors.
1310.1.6.2 \u2014 Conduit with Both Ends Terminating Indoors.
1310.1.7 \u2014 Plastic Piping.
1310.1.7.1 \u2014 Connections Between Metallic and Plastic Piping.
1310.1.7.2 \u2014 Tracer Wire.
1310.2 \u2014 CSST Piping Systems.
1310.3 \u2014 Installation of Aboveground Piping.
1310.3.1 \u2014 Protective Coating.
1310.3.2 \u2014 Building Structure.
1310.3.3 \u2014 Gas Piping to be Sloped.
1310.3.3.1 \u2014 Ceiling Locations.
1310.3.4 \u2014 Prohibited Locations. <\/td>\n<\/tr>\n
310<\/td>\n1310.3.5 \u2014 Hangers, Supports, and Anchors.
1310.3.5.1 \u2014 Spacing.
1310.3.5.2 \u2014 Expansion and Contraction.
1310.3.5.3 \u2014 Piping on Roof Tops.
1310.3.6 \u2014 Removal of Piping.
1310.4 \u2014 Concealed Piping in Buildings.
1310.4.1 \u2014 Connections.
1310.4.2 \u2014 Piping in Partitions.
1310.4.3 \u2014 Tubing in Partitions.
1310.4.4 \u2014 Piping in Floors.
1310.5 \u2014 Piping in Vertical Chases.
1310.5.1 \u2014 Pressure Reduction.
Table 1310.3.5.1\u2014 Support of Piping [NFPA 54: Table 7.2.6.2] <\/td>\n<\/tr>\n
311<\/td>\n1310.5.2 \u2014 Chase Construction.
1310.5.3 \u2014 Ventilation.
1310.6 \u2014 Maximum Operating Pressure in Buildings.
1310.6.1 \u2014 LP-Gas Systems.
1310.7 \u2014 Appliance Overpressure Protection.
1310.8 \u2014 Gas Pipe Turns.
1310.8.1 \u2014 Metallic Pipe.
1310.8.2 \u2014 Plastic Pipe.
1310.8.3 \u2014 Elbows.
1310.9 \u2014 Drips and Sediment Traps.
1310.9.1 \u2014 Location of Drips.
1310.9.2 \u2014 Sediment Traps.
1310.10 \u2014 Outlets. <\/td>\n<\/tr>\n
312<\/td>\n1310.10.1 \u2014 Cap Outlets.
1310.10.1.1 \u2014 Appliance Shutoff Valves.
1310.11 \u2014 Manual Gas Shutoff Valves.
1310.11.1 \u2014 Valves Controlling Multiple Systems.
1310.11.1.1 \u2014 Shutoff Valves for Multiple House Lines.
1310.11.2 \u2014 Emergency Shutoff Valves.
1310.11.3 \u2014 Shutoff Valve for Laboratories.
1310.12 \u2014 Prohibited Devices.
1310.13 \u2014 Systems Containing Gas-Air Mixtures Outside the Flammable Range.
1310.14 \u2014 Systems Containing Flammable Gas-Air Mixtures.
1310.14.1 \u2014 Required Components.
1310.14.2 \u2014 Optional Components.
1310.14.3 \u2014 Additional Requirements.
1310.14.4 \u2014 Special Requirements for Mixing Blowers. <\/td>\n<\/tr>\n
313<\/td>\n1310.14.5 \u2014 Installation of Gas-Mixing Machines.
1310.14.6 \u2014 Use of Automatic Firechecks, Safety Blowouts, or Backfire Preventers.
1311.0 \u2014 Electrical Bonding and Grounding.
1311.1 \u2014 Pipe and Tubing Other than CSST.
1311.2 \u2014 Bonding of CSST Gas Piping.
1311.2.1 \u2014 Bonding Jumper Connection.
1311.2.2 \u2014 Bonding Jumper Size.
1311.2.3 \u2014 Bonding Jumper Length. <\/td>\n<\/tr>\n
314<\/td>\n1311.2.4 \u2014 Bonding Connections.
1311.2.5 \u2014 Devices Used for Bonding.
1311.3 \u2014 Arc-Resistant Jacketed CSST.
1311.4 \u2014 Prohibited Use.
1311.5 \u2014 Lightning Protection System.
1311.6 \u2014 Electrical Circuits.
1311.7 \u2014 Electrical Connections.
1311.7.1 \u2014 Safety Control.
1312.0 \u2014 Appliance and Equipment Connections to Building Piping.
1312.1 \u2014 Connecting Appliances and Equipment.
1312.1.1 \u2014 Commercial Cooking Appliances.
1312.1.2 \u2014 Restraining Device.
1312.2 \u2014 Suspended Low-Intensity Infrared Tube Heaters.
1312.3 \u2014 Use of Nonmetalic Gas Hose Connectors.
1312.3.1 \u2014 Indoor.
1312.3.2 \u2014 Outdoor. <\/td>\n<\/tr>\n
315<\/td>\n1312.4 \u2014 Injection (Bunsen) Burners.
1312.5 \u2014 Connection of Portable and Mobile Industrial Appliances.
1312.5.1 \u2014 Swivel Joints or Couplings.
1312.5.2 \u2014 Metal Flexible Connectors.
1312.5.3 \u2014 Flexible Connectors.
1312.6 \u2014 Appliance Shutoff Valves and Connections.
1312.7 \u2014 Quick-Disconnect Devices.
1312.8 \u2014 Gas Convenience Outlets.
1312.9 \u2014 Sediment Trap.
1312.10 \u2014 Installation of Piping.
1312.11 \u2014 Liquefied Petroleum Gas Facilities and Piping.
1313.0 \u2014 Pressure Testing, Inspection, and Purging.
1313.1 \u2014 Piping Installations.
Figures
Figure 1312.9 \u2014 Method of Installing a Tee Fiting Sediment Trap [NFPA 54: Figure 9.6.8] <\/td>\n<\/tr>\n
316<\/td>\n1313.1.1 \u2014 Inspection Requirements.
1313.1.2 \u2014 Repairs and Additions.
1313.1.3 \u2014 New Branches.
1313.1.4 \u2014 Piping System.
1313.1.5 \u2014 Regulators and Valves.
1313.1.6 \u2014 Test Medium.
1313.2 \u2014 Test Preparation.
1313.2.1 \u2014 Pipe Joints.
1313.2.2 \u2014 Expansion Joints.
1313.2.3 \u2014 Appliances and Equipment.
1313.2.4 \u2014 Designed for Operating Pressures Less than Test Pressure.
1313.2.5 \u2014 Designed for Operating Pressures Equal to or Greater than Test Pressure.
1313.2.6 \u2014 Safety.
1313.3 \u2014 Test Pressure.
1313.4 \u2014 Detection of Leaks and Defects.
1313.4.1 \u2014 Detecting Leaks.
1313.4.2 \u2014 Repair or Replace.
1313.5 \u2014 Piping System Leak Test.
1313.5.1 \u2014 Turning Gas On. <\/td>\n<\/tr>\n
317<\/td>\n1313.5.2 \u2014 Leak Check.
1313.5.3 \u2014 Placing Appliances and Equipment in Operation.
1313.6 \u2014 Purging Requirements.
1313.6.1 \u2014 Piping Systems Required to be Purged Outdoors.
1313.6.1.1 \u2014 Removal from Service.
1313.6.1.2 \u2014 Placing in Operation.
1313.6.1.3 \u2014 Outdoor Discharge of Purged Gases.
1313.6.1.4 \u2014 Combustible Gas Indicator.
1313.6.2 \u2014 Piping Systems Allowed to be Purged Indoors or Outdoors.
1313.6.2.1 \u2014 Purging Procedure.
Table 1313.6.1 \u2014 Size and Length of Piping [NFPA 54: Table 8.3.1] <\/td>\n<\/tr>\n
318<\/td>\n1313.6.2.2 \u2014 Combustible Gas Detector.
1313.6.3 \u2014 Purging Appliances and Equipment.
1314.0 \u2014 Required Gas Supply.
1314.1 \u2014 General.
1314.2 \u2014 Volume.
1314.3 \u2014 Gas Appliances.
1314.4 \u2014 Size of Piping Outlets.
1315.0 \u2014 Required Gas Piping Size.
1315.1 \u2014 Pipe Sizing Methods.
1315.1.1 \u2014 Longest Length Method.
1315.1.2 \u2014 Branch Length Method.
1315.1.3 \u2014 Hybrid Pressure.
1315.2 \u2014 Sizing of Gas Piping Systems.
1315.2.1 \u2014 Natural Gas Piping Systems.
1315.2.2 \u2014 Propane Piping Systems.
1315.3 \u2014 Sizing Equations. <\/td>\n<\/tr>\n
319<\/td>\n1315.4 \u2014 Sizing of Piping Sections.
1315.5 \u2014 Engineering Methods.
1315.6 \u2014 Variable Gas Pressures.
Table 1315.3 \u2014 Cr and Y for Natural Gas and Undiluted Propane at Standard Conditions [NFPA 54: TABLE 6.4.2] <\/td>\n<\/tr>\n
320<\/td>\nFigure 1315.1.1 \u2014 Example Illustrated Use of Table 1308.4.1 and Table 1315.2(1) <\/td>\n<\/tr>\n
321<\/td>\nTable 1315.2(1) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.2.1(b)] <\/td>\n<\/tr>\n
322<\/td>\nTable 1315.2(2) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.2.1(c)] <\/td>\n<\/tr>\n
323<\/td>\nTable 1315.2(3) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.2.1(d)]* <\/td>\n<\/tr>\n
324<\/td>\nTable 1315.2(4) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.2.1(e)]* <\/td>\n<\/tr>\n
325<\/td>\nTable 1315.2(5) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.2.1(f)]* <\/td>\n<\/tr>\n
326<\/td>\nTable 1315.2(6) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.2.1(g)]* <\/td>\n<\/tr>\n
327<\/td>\nTable 1315.2(7) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(h)] <\/td>\n<\/tr>\n
328<\/td>\nTable 1315.2(8) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(i)] <\/td>\n<\/tr>\n
329<\/td>\nTABLE 1315.2(9) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(j)] <\/td>\n<\/tr>\n
330<\/td>\nTable 1315.2(10) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(k)] <\/td>\n<\/tr>\n
331<\/td>\nTable 1315.2(11) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(l)] <\/td>\n<\/tr>\n
332<\/td>\nTable 1315.2(12) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(m)] <\/td>\n<\/tr>\n
333<\/td>\nTable 1315.2(13) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.2.1(n)] <\/td>\n<\/tr>\n
334<\/td>\nTable 1315.2(14) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.2.1(o)] <\/td>\n<\/tr>\n
335<\/td>\nTable 1315.2(15) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.2.1(p)] <\/td>\n<\/tr>\n
336<\/td>\nTable 1315.2(16) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.2.1(q)] <\/td>\n<\/tr>\n
337<\/td>\nTable 1315.2(17) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.2.1(r)] <\/td>\n<\/tr>\n
338<\/td>\nTable 1315.2(18) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.2.1(s)] <\/td>\n<\/tr>\n
339<\/td>\nTable 1315.2(19) \u2014 Polyethylene Plastic Pipe [NFPA 54: Table 6.2.1(t)] <\/td>\n<\/tr>\n
340<\/td>\nTable 1315.2(20) \u2014 Polyethylene Plastic Pipe [NFPA 54: Table 6.2.1(u)] <\/td>\n<\/tr>\n
341<\/td>\nTable 1315.2(21) \u2014 Polyethylene Plastic Pipe [NFPA 54: Table 6.2.1(v)] <\/td>\n<\/tr>\n
342<\/td>\nTable 1315.2(22) \u2014 Polyethylene Plastic Tubing [NFPA 54: Table 6.2.1(w)]
Table 1315.2(23) \u2014 Polyethylene Plastic Tubing [NFPA 54: Table 6.2.1(x)] <\/td>\n<\/tr>\n
343<\/td>\nTable 1315.2(24) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.3.1(a)] <\/td>\n<\/tr>\n
344<\/td>\nTable 1315.2(25) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.3.1(b)] <\/td>\n<\/tr>\n
345<\/td>\nTable 1315.2(26) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.3.1(c)] <\/td>\n<\/tr>\n
346<\/td>\nTable 1315.2(27) \u2014 Schedule 40 Metallic Pipe [NFPA 54: Table 6.3.1(d)] <\/td>\n<\/tr>\n
347<\/td>\nTable 1315.2(28) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.3.1(e)] <\/td>\n<\/tr>\n
348<\/td>\nTable 1315.2(29) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.3.1(f)] <\/td>\n<\/tr>\n
349<\/td>\nTable 1315.2(30) \u2014 Semi-Rigid Copper Tubing [NFPA 54: Table 6.3.1(g)] <\/td>\n<\/tr>\n
350<\/td>\nTable 1315.2(31) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.3.1(h)] <\/td>\n<\/tr>\n
351<\/td>\nTable 1315.2(32) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.3.1(i)] <\/td>\n<\/tr>\n
352<\/td>\nTable 1315.2(33) \u2014 Corrugated Stainless Steel Tubing (CSST) [NFPA 54: Table 6.3.1(j)] <\/td>\n<\/tr>\n
353<\/td>\nTable 1315.2(34) \u2014 Polyethylene Plastic Pipe [NFPA 54: Table 6.3.1(k)] <\/td>\n<\/tr>\n
354<\/td>\nTable 1315.2(35) \u2014 Polyethylene Plastic Pipe [NFPA 54: Table 6.3.1(l)] <\/td>\n<\/tr>\n
355<\/td>\nTable 1315.2(36) \u2014 Polyethylene Plastic Tubing [NFPA 54: Table 6.3.1(m)] <\/td>\n<\/tr>\n
356<\/td>\nChapter 14 \u2014 Process Piping <\/td>\n<\/tr>\n
358<\/td>\n1401.0 \u2014 General.
1401.1 \u2014 Applicability.
1402.0 \u2014 Permit.
1402.1 \u2014 General.
1403.0 \u2014 Plans Required.
1403.1 \u2014 General.
1404.0 \u2014 Workmanship.
1404.1 \u2014 General.
1405.0 \u2014 Inspections.
1405.1 \u2014 General.
1405.2 \u2014 Required Inspections.
1405.2.1 \u2014 Rough Piping Inspection.
1405.2.2 \u2014 Final Piping Inspection.
1405.3 \u2014 Other Inspections.
1406.0 \u2014 Pipe, Tubing, and Fittings.
1406.1 \u2014 General.
1406.2 \u2014 Hazardous Process Piping (HPP).
1406.2.1 \u2014 Installation in Exit Corridors and Above Other Occupancies. <\/td>\n<\/tr>\n
359<\/td>\n1406.2.1.1 \u2014 Automatic Sprinklers.
1406.2.1.2 \u2014 Ventilation.
1406.2.1.3 \u2014 Receptor.
1406.2.1.4 \u2014 Separation.
1406.2.1.5 \u2014 Emergency Shutoff Valves.
1406.2.1.6 \u2014 Electrical Wiring.
1406.3 \u2014 Special Requirements for HPP Gases.
1406.3.1 \u2014 Special Provisions.
1406.3.2 \u2014 Piping and Tubing Installation.
1406.3.3 \u2014 Gas-Detection System. <\/td>\n<\/tr>\n
360<\/td>\nChapter 15 \u2014 Solar Energy Systems <\/td>\n<\/tr>\n
362<\/td>\n1501.0 \u2014 General.
1501.1 \u2014 Applicability.
1502.0 \u2014 General. [HCD 1 & HCD 2] <\/td>\n<\/tr>\n
364<\/td>\nChapter 16 \u2014 Stationary Power Plants <\/td>\n<\/tr>\n
366<\/td>\n1601.0 \u2014 Stationary Fuel Cell Power Plants.
1601.1 \u2014 General.
1602.0 \u2014 Stationary Gas Engines and Generators.
1602.1 \u2014 General.
1602.2 \u2014 Connection to the Gas Supply Piping.
1602.3 \u2014 Stationary Engine Generators. <\/td>\n<\/tr>\n
368<\/td>\nChapter 17 \u2014 Referenced Standards <\/td>\n<\/tr>\n
370<\/td>\n1701.0 \u2014 General.
1701.1 \u2014 Standards.
Table
Table 1701.1 \u2014 Referenced Standards <\/td>\n<\/tr>\n
383<\/td>\nTable 1701.2 \u2014 Standards, Publications, Practices, and Guides <\/td>\n<\/tr>\n
388<\/td>\nAbbreviations in Table 1701.1 and Table 1701.2 <\/td>\n<\/tr>\n
390<\/td>\nAppendices \u2014 Table of Contents <\/td>\n<\/tr>\n
392<\/td>\nAppendix A \u2014 Residential Plan Examiner Review Form for HVAC System Design <\/td>\n<\/tr>\n
394<\/td>\nResidential Plan Examiner Review Form for HVAC System Design (Loads, Equipment, Ducts) [ACCA] <\/td>\n<\/tr>\n
396<\/td>\nAppendix B \u2014 Procedures to be Followed to Place Gas Equipment in Operation <\/td>\n<\/tr>\n
398<\/td>\nB 101.0 \u2014 Adjusting the Burner Input.
B 101.1 \u2014 Adjusting Input.
B 101.2 \u2014 High Altitude.
B 102.0 \u2014 Primary Air Adjustment.
B 102.1 \u2014 General.
B 103.0 \u2014 Safety Shutoff Devices.
B 103.1 \u2014 General.
B 104.0 \u2014 Automatic Ignition.
B 104.1 \u2014 General.
B 105.0 \u2014 Protective Devices.
B 105.1 \u2014 General.
B 106.0 \u2014 Checking the Draft.
B 106.1 \u2014 General.
B 107.0 \u2014 Operating Instructions.
B 107.1 \u2014 General. <\/td>\n<\/tr>\n
400<\/td>\nAppendix C \u2014 Installation and Testing of Oil (Liquid) Fuel-Fired Equipment <\/td>\n<\/tr>\n
402<\/td>\nC 101.0 \u2014 General.
C 101.1 \u2014 Applicability.
C 102.0 \u2014 Definitions. <\/td>\n<\/tr>\n
403<\/td>\nC 103.0 \u2014 Standards and Accepted Practices.
C 103.1 \u2014 General.
C 104.0 \u2014 Approval of Equipment.
C 104.1 \u2014 General.
C 105.0 \u2014 Placing Equipment in Operation.
C 105.1 \u2014 General.
C 106.0 \u2014 Pilot Operation.
C 106.1 \u2014 General.
C 107.0 \u2014 Burner Operation.
C 107.1 \u2014 General.
C 108.0 \u2014 Method of Test.
C 108.1 \u2014 General Test Methods. <\/td>\n<\/tr>\n
405<\/td>\nC 109.0 \u2014 Special Requirements Based on Btu\/h Input.
C 109.1 \u2014 General. <\/td>\n<\/tr>\n
408<\/td>\nAppendix D \u2014 Fuel Supply: Manufactured\/Mobile Home Parks and Recreational Vehicle Parks <\/td>\n<\/tr>\n
410<\/td>\nD 101.0 \u2014 Fuel Gas Piping Systems.
D 101.1 \u2014 General.
D 101.2 \u2014 Gas Supply Connections.
D 101.3 \u2014 Location of Gas Supply Connection.
D 101.4 \u2014 Recreational Vehicle Park Fuel-Gas Equipmentand Installations.
D 102.0 \u2014 Single and Multiple Manufactured Home Site Fuel Supply Systems.
D 102.1 \u2014 Underground Installation.
D 102.1.1 \u2014 Open-Ended Gastight Conduit.
D 102.1.2 \u2014 Requirements.
D 103.0 \u2014 Manufactured Home Site Gas Shutoff Valve.
D 103.1 \u2014 General.
D 104.0 \u2014 Gas Meters.
D 104.1 \u2014 Support of Meters.
D 104.2 \u2014 Location of Meters.
D 104.3 \u2014 Meter Shutoff Valve or Cock. <\/td>\n<\/tr>\n
411<\/td>\nD 105.0 \u2014 Cathodic Protection Requirements.
D 105.1 \u2014 General.
D 106.0 \u2014 Manufactured Home Community LP-Gas Supply Systems.
D 106.1 \u2014 General.
D 107.0 \u2014 Required Gas Supply.
D 107.1 \u2014 General.
D 108.0 \u2014 Gas Pipe Sizing and Pressure.
D 108.1 \u2014 Size.
D 108.2 \u2014 Pressure.
D 109.0 \u2014 Gas Piping Materials.
D 109.1 \u2014 Metal.
D 109.2 \u2014 Protection Coatings for Metal Gas Piping.
D 109.3 \u2014 Plastic.
D 110.0 \u2014 Gas Piping Installations.
D 110.1 \u2014 Minimum Burial Below Ground Level and Clearances.
D 110.2 \u2014 Metallic Gas Piping.
Tables
Table D 107.1 \u2014 Demand Factors for Use in Calculating Gas Piping Systems in Manufactured Home Communities [NFPA 501A: TABLE 4.3.4.1] <\/td>\n<\/tr>\n
412<\/td>\nD 110.2.1 \u2014 Cathodic Protection.
D 110.2.2 \u2014 Underground Metallic Systems.
D 110.3 \u2014 Plastic Gas Piping.
D 110.4 \u2014 Gas Piping System Shutoff Valve.
D 111.0 \u2014 Liquefied Petroleum Gas Appliances.
D 111.1 \u2014 General.
D 112.0 \u2014 Oil Supply.
D 112.1 \u2014 General.
D 112.2 \u2014 Minimum Oil Supply Tank Size.
D 112.3 \u2014 Oil Supply Connections.
D 113.0 \u2014 Fuel Supply Systems Installation.
D 113.1 \u2014 Flexible Gas Connector. <\/td>\n<\/tr>\n
413<\/td>\nD 113.2 \u2014 Use of Approved Pipe and Fittings of Extension.
D 113.3 \u2014 Mechanical Protection.
D 113.4 \u2014 Special Rules on Atmospherically Controlled Regulators.
D 113.5 \u2014 Fuel Gas Piping Test.
D 113.5.1 \u2014 Procedures.
D 113.5.2 \u2014 Warning.
D 113.5.3 \u2014 Vents.
D 113.6 \u2014 Oil Tanks.
D 113.6.1 \u2014 Installation.
D 113.6.2 \u2014 Capacity.
D 113.6.3 \u2014 Location.
D 113.6.4 \u2014 Vent.
D 113.6.5 \u2014 Liquid Level.
D 113.6.6 \u2014 Fill Opening.
D 114.0 \u2014 Manufactured Home Accessory Building Fuel Supply Systems.
D 114.1 \u2014 General. <\/td>\n<\/tr>\n
414<\/td>\nD 115.0 \u2014 Community Building Fuel Supply Systems in Manufactured Home Communities.
D 115.1 \u2014 Fuel Gas Piping and Equipment Installations.
D 115.2 \u2014 Oil Supply Systems in Manufactured Home Communities.
D 115.3 \u2014 Oil-Burning Equipment and Installation.
D 115.4 \u2014 Inspection and Tests. <\/td>\n<\/tr>\n
416<\/td>\nAppendix E \u2014 Sustainable Practices <\/td>\n<\/tr>\n
418<\/td>\nE 101.0 \u2014 General.
E 101.1 \u2014 Applicability.
E 101.2 \u2014 Definition of Terms.
E 201.0 \u2014 Definitions.
E 201.1 \u2014 Cycles of Concentration for Cooling Towers.
E 201.2 \u2014 Duct Wall Penetrations.
E 201.3 \u2014 Energy Star.
E 201.4 \u2014 Geothermal.
E 201.5 \u2014 Heating Seasonal Performance Factor (HSPF).
E 201.6 \u2014 Integrated Energy Efficiency Ratio (IEER).
E 201.7 \u2014 Integrated Part-Load Value (IPLV).
E 201.8 \u2014 Joint, Transverse.
E 201.9 \u2014 Maintenance.
E 201.10 \u2014 Minimum Efficiency Reporting Value (MERV).
E 201.11 \u2014 Multi-Occupant Spaces.
E 201.12 \u2014 Recirculation System.
E 201.13 \u2014 Seam, Longitudinal.
E 201.14 \u2014 Seasonal Energy Efficiency Ratio (SEER).
E 301.0 \u2014 General Regulations.
E 301.1 \u2014 Installation.
E 301.2 \u2014 Qualifications.
E 302.0 \u2014 Disposal of Liquid Waste.
E 302.1 \u2014 Disposal.
E 302.2 \u2014 Connections to Plumbing System Required. <\/td>\n<\/tr>\n
419<\/td>\nE 303.0 \u2014 Abandonment.
E 303.1 \u2014 General.
E 401.0 \u2014 Water Conservation and Efficiency.
E 401.1 \u2014 General.
E 402.0 \u2014 Meters.
E 402.1 \u2014 Required.
E 402.2 \u2014 Consumption Data.
E 402.3 \u2014 Access.
E 403.0 \u2014 HVAC Water Use.
E 403.1 \u2014 Once-Through Cooling.
E 403.2 \u2014 Cooling Towers and Evaporative Coolers.
E 403.3 \u2014 Cooling Tower Makeup Water.
E 403.4 \u2014 Evaporative Cooler Water Use.
E 403.4.1 \u2014 Overflow Alarm.
E 403.4.2 \u2014 Automatic Pump Shut-Off.
E 403.4.3 \u2014 Cooler Reservoir Discharge.
E 403.4.4 \u2014 Discharge Water Reuse.
E 403.4.5 \u2014 Discharge Water to Drain.
E 403.5 \u2014 Use of Reclaimed (Recycled) and Onsite Treated Nonpotable Water for Cooling. <\/td>\n<\/tr>\n
420<\/td>\nE 403.5.1 \u2014 Drift Eliminator.
E 403.5.2 \u2014 Disinfection.
E 501.0 \u2014 Heating, Ventilation, and Air-Conditioning Systems and Equipment \u2013 Energy Efficiency.
E 501.1 \u2014 Scope.
E 502.0 \u2014 Heating, Ventilation, and Air-Conditioning Low-Rise Residential Buildings.
E 502.1 \u2014 General.
E 502.2 \u2014 Heating, Ventilating, and Air-Conditioning Systems and Equipment.
E 502.2.1 \u2014 Nonresidential Type Systems and Equipment.
E 502.3 \u2014 Balancing.
E 502.3.1 \u2014 Balancing Dampers.
E 502.4 \u2014 Ducts.
E 502.4.1 \u2014 Insulation for Ducts.
E 502.4.2 \u2014 Ducts and Register Penetrations.
E 502.4.3 \u2014 Duct Leakage Test.
E 502.4.3.1 \u2014 Duct Leakage Verification Test.
E 502.4.4 \u2014 Duct Sizing.
E 502.5 \u2014 Insulation for Piping.
E 502.6 \u2014 Ventilation and Combustion Air.
E 502.6.1 \u2014 Combustion Air. <\/td>\n<\/tr>\n
421<\/td>\nE 502.7 \u2014 Electric Heating Systems
E 502.7.1 \u2014 Wall, Floor, or Ceiling Electric-Resistance Heating.
E 502.7.2 \u2014 Electric Central Warm Air Heating.
Tables
Table E 502.5 \u2014 Minimum Pipe Insulation Thickness [ASHRAE 90.2: Table 6.5]
Table E 502.6 \u2014 Ventilation Air [ASHRAE 90.2: Table 6.6.1] <\/td>\n<\/tr>\n
422<\/td>\nE 502.8 \u2014 Bath Ceiling Units.
E 502.9 \u2014 HVAC Equipment, Rated Combinations.
E 502.10 \u2014 Controls.
E 502.10.1 \u2014 Initial Control Setting.
E 502.10.2 \u2014 Ventilation Control.
E 502.10.3 \u2014 Humidity Control.
E 502.10.3.1 \u2014 Cooling.
E 502.10.4 \u2014 Freeze Protection Systems.
E 502.10.5 \u2014 Other Controls.
E 502.11 \u2014 Whole House Fans.
E 502.12 \u2014 Dampers.
Table E 502.9 \u2014 Minimum Requirements for Non-Federally Covered HVAC Equipment [ASHRAE 90.2: Table 6.9] <\/td>\n<\/tr>\n
423<\/td>\nE 503.0 \u2014 Heating, Ventilation, and Air-Conditioning \u2013 Other than Low-Rise Residential Buildings.
E 503.1 \u2014 General.
E 503.1.1 \u2014 New Buildings.
E 503.1.2 \u2014 Additions to Existing Buildings.
E 503.1.3 \u2014 Alterations to Heating, Ventilating, Air-Conditioning, and Refrigeration in Existing Buildings.
E 503.1.3.1 \u2014 New Cooling Systems.
E 503.1.3.2 \u2014 Existing Cooling Systems.
E 503.1.3.3 \u2014 Ductwork.
E 503.1.3.4 \u2014 Piping.
E 503.2 \u2014 Compliance Path(s).
E 503.2.1 \u2014 Projects Using Energy Cost Budget Method.
E 503.3 \u2014 Simplified Approach Option for HVAC Systems.
E 503.3.1 \u2014 Criteria. <\/td>\n<\/tr>\n
424<\/td>\nE 503.3.2 \u2014 Climate Zone Determination. <\/td>\n<\/tr>\n
425<\/td>\nE 503.4 \u2014 Mandatory Provisions.
E 503.4.1 \u2014 Water-Cooled Centrifugal Chilling Packages. <\/td>\n<\/tr>\n
426<\/td>\nE 503.4.1.1 \u2014 Positive Displacement (air- and water-cooled) Chilling Packages.
E 503.4.2 \u2014 Equipment not Listed.
E 503.4.3 \u2014 Verification of Equipment Efficiencies.
E 503.4.4 \u2014 Labeling.
E 503.4.4.1 \u2014 Packaged Terminal Air Conditioners.
E 503.4.5 \u2014 Load Calculations.
E 503.4.5.1 \u2014 Pump Head.
E 503.4.6 \u2014 Zone Thermostatic Controls. <\/td>\n<\/tr>\n
427<\/td>\nE 503.4.6.1 \u2014 Dead Band.
E 503.4.6.2 \u2014 Setpoint Overlap Restriction.
E 503.4.6.3 \u2014 Off-Hour Controls.
E 503.4.6.3.1 \u2014 Automatic Shutdown.
E 503.4.6.3.2 \u2014 Setback Controls.
E 503.4.6.3.3 \u2014 Optimum Start Controls.
E 503.4.6.3.4 \u2014 Zone Isolation. <\/td>\n<\/tr>\n
428<\/td>\nE 503.4.6.3.5 \u2014 Automatic Control of HVAC in Hotel\/Motel Guest Rooms.
E 503.4.6.3.5.1 \u2014 Guest Room HVAC Set-Point Control.
E 503.4.6.4 \u2014 Ventilation System Controls.
E 503.4.6.4.1 \u2014 Shutoff Damper Controls.
Table E 503.4.6.4.2 \u2014 Maximum Damper Leakage (cubic foot per minute per square foot) at 1.0 in. w.g [ASHRAE 90.1: Table 6.4.3.4.3] <\/td>\n<\/tr>\n
429<\/td>\nE 503.4.6.4.2 \u2014 Dampers Leakage.
E 503.4.6.4.3 \u2014 Ventilation Fan Controls.
E 503.4.6.5 \u2014 Enclosed Parking Garage Ventilation.
E 503.4.6.6 \u2014 Heat Pump Auxiliary Heat Control.
E 503.4.6.7 \u2014 Humidification and Dehumidification.
E 503.4.6.8 \u2014 Freeze Protection and Snow or Ice Melting Systems.
E 503.4.6.9 \u2014 Ventilation Controls for High-Occupancy Areas. <\/td>\n<\/tr>\n
430<\/td>\nE 503.4.6.10 \u2014 Outdoor Heating.
E 503.4.6.11 \u2014 Heated or Cooled Vestibules.
E 503.4.6.12 \u2014 Direct Digital Control (DDC) Requirements.
E 503.4.6.12.1 \u2014 DDC Applications.
E 503.4.6.12.2 \u2014 DDC Controls.
Table E 503.4.6.12.1 \u2014 DDC Applications and Qualifications [ASHRAE 90.1:6.4.3.10.1] <\/td>\n<\/tr>\n
431<\/td>\nE 503.4.6.12.3 \u2014 DDC Display.
E 503.4.6.13 \u2014 Economizer Fault Detection Diagnostics (FDD).
E 503.4.7 \u2014 HVAC System Construction and Insulation.
E 503.4.7.1 \u2014 Insulation.
E 503.4.7.1.1 \u2014 Duct and Plenum Insulation.
E 503.4.7.1.2 \u2014 Piping Insulation. <\/td>\n<\/tr>\n
432<\/td>\nE 503.4.7.1.3 \u2014 Sensible Heating Panel.
E 503.4.7.1.4 \u2014 Radiant Floor Heating.
E 503.4.7.2 \u2014 Ductwork and Plenum Leakage.
E 503.4.7.2.1 \u2014 Duct Leakage Tests.
E 503.5 \u2014 Prescriptive Path, Economizers. <\/td>\n<\/tr>\n
433<\/td>\nE 503.5.1 \u2014 Air Economizers, Design Capacity.
E 503.5.1.1 \u2014 Control Signal.
E 503.5.1.2 \u2014 High-Limit Shutoff.
E 503.5.1.3 \u2014 Dampers.
E 503.5.1.4 \u2014 Relief of Excess Outdoor Air.
Table E 503.5(1) \u2014 Minimum Fan-Cooling Unit Size Where an Economizer is Required [ASHRAE 90.1: Table 6.5.1-1]
Table E 503.5(2) \u2014 Eliminate Required Economizer for Comfort Cooling by Increasing Cooling Efficiency [ASHRAE 90.1: Table 6.5.1-2] <\/td>\n<\/tr>\n
434<\/td>\nE 503.5.1.5 \u2014 Sensor Accuracy.
E 503.5.2 \u2014 Fluid Economizers, Design Capacity.
Table E 503.5.1.2 \u2014 High-Limit Shutoff Control Settings for Air Economizers [ASHRAE 90.1: Table 6.5.1.1.3]
Table E 503.5.2 \u2014 Water Economizer Sizing Dry-Bulb and Wet-Bulb Requirments for Computer Rooms [ASHRAE 90.1: Table 6.5.1.2.1] <\/td>\n<\/tr>\n
435<\/td>\nE 503.5.2.1 \u2014 Maximum Hydronic Pressure Drop.
E 503.5.3 \u2014 Integrated Economizer Control.
E 503.5.4 \u2014 Economizer Heating System Impact.
E 503.5.4.1 \u2014 Economizer Humidification System Impact.
E 503.5.5 \u2014 Simultaneous Heating and Cooling Limitation, Zone Controls.
Table E 503.5.3 \u2014 Dx Cooling Stage Requirements for Modulating Airflow Units [ASHRAE 90.1:6.5.1.3] <\/td>\n<\/tr>\n
436<\/td>\nE 503.5.5.1 \u2014 Supply Air Temperature Reheat Limit.
E 503.5.5.2 \u2014 Hydronic System Controls.
E 503.5.5.2.1 \u2014 Three-Pipe System.
E 503.5.5.2.2 \u2014 Two-Pipe Changeover System.
E 503.5.5.2.3 \u2014 Hydronic (Water Loop) Heat Pump Systems. <\/td>\n<\/tr>\n
437<\/td>\nE 503.5.5.3 \u2014 Dehumidification.
E 503.5.5.4 \u2014 Humidifier Preheat.
E 503.5.5.4.1 \u2014 Insulation.
E 503.5.5.5 \u2014 Preheat Coils.
E 503.5.6 \u2014 Air System Design and Control.
E 503.5.6.1 \u2014 Fan System Power and Efficiency.
Table E 503.5.6.1(1) \u2014 Fan Power Limitation [ASHRAE 90.1: Table 6.5.3.1-1] <\/td>\n<\/tr>\n
438<\/td>\nE 503.5.6.1.1 \u2014 Motor Nameplate Horsepower.
E 503.5.6.1.2 \u2014 Fan Efficiency.
Table E 503.5.6.1(2) \u2014 Fan Power Limitation Pressure Drop Admustment [ASHRAE 90.1: Table 6.5.3.1-2] <\/td>\n<\/tr>\n
439<\/td>\nE 503.5.6.2 \u2014 Supply Fan Airflow Control.
E 503.5.6.2.1 \u2014 VAV Static Pressure Sensor Location.
E 503.5.6.2.2 \u2014 VAV Setpoint Reset.
E 503.5.6.3 \u2014 Multiple-Zone VAV System Ventilation Optimization Control.
Tale E 503.5.6.2 \u2014 Fan Airflow Control [ASHRAE 90.1: Table 6.5.3.2.1] <\/td>\n<\/tr>\n
440<\/td>\nE 503.5.6.4 \u2014 Supply Air Temperature Reset Controls.
E 503.5.6.5 \u2014 Fractional Horsepower Fan Motors.
Table E 503.5.6.5(1) \u2014 Minimum Average Full-Load Efficiency for Polyphase Small Electric Motors [ASHRAE 90.1: Table 10.8-3]
Table E 503.5.6.5(2) \u2014 Minimum Full-Load Efficiency for Capacitor-Start Capacitor-Run and Capacitor-Start Induction-Run Small Electric Motors [ASHRAE 90.1: Table 10.8-4] <\/td>\n<\/tr>\n
441<\/td>\nE 503.5.6.6 \u2014 Ventilation Design.
E 503.5.7 \u2014 Hydronic System Design and Control.
E 503.5.7.1 \u2014 Hydronic Variable Flow Systems.
E 503.5.7.2 \u2014 Chiller and Boiler Isolation.
Table E 503.5.7 \u2014 Boiler Turndown [ASHRAE 90.1: Table 6.5.4.1]
Table E 503.5.7.1 \u2014 Pump Flow Control Requirements [ASHRAE 90.1: Table 6.5.4.2]
Table E 503.5.7.1 \u2014 Pump Flow Control Requirements [ASHRAE 90.1: Table 6.5.4.2] <\/td>\n<\/tr>\n
442<\/td>\nE 503.5.7.2.1 \u2014 Boiler Isolation.
E 503.5.7.3 \u2014 Chilled- and Hot-Water Temperature Reset Controls.
E 503.5.7.4 \u2014 Hydronic (Water Loop) Heat Pump and Water-Cooled Unitary Air Conditioners.
E 503.5.7.4.1 \u2014 Controls.
E 503.5.7.5 \u2014 Pipe Sizing.
E 503.5.7.4.1 \u2014 Controls.
E 503.5.7.5 \u2014 Pipe Sizing.
Table E 503.5.7.5 \u2014 Piping System Design Maximum Flow Rate (gallons per minute) [ASHRAE 90.1: Table 6.5.4.6] <\/td>\n<\/tr>\n
443<\/td>\nE 503.5.8 \u2014 Heat Rejection Equipment.
E 503.5.8.1 \u2014 Fan Speed Control.
E 503.5.8.2 \u2014 Variable-Speed Fan Drives.
E 503.5.9 \u2014 Limitation on Centrifugal Fan Open-Circuit Cooling Towers.
E 503.5.9.1 \u2014 Tower Flow Turndown.
E 503.5.10 \u2014 Exhaust Air Energy Recovery. <\/td>\n<\/tr>\n
444<\/td>\nE 503.5.10.1 \u2014 Heat Recovery for Service Water Heating.
E 503.5.10.1.1 \u2014 Condenser Heat Recovery Systems.
E 503.5.10.1.2 \u2014 Capacity.
E 503.5.11 \u2014 Exhaust Systems.
E 503.5.11.1 \u2014 Transfer Air.
Table E 503.5.10(1) \u2014 Exhaust Air Energy Recovery Requirements for Ventilation Systems Operating Less than 8000 Hours Per Year* [ASHRAE 90.1: Table 6.5.6.1-1]
Table E 503.5.10(2) \u2014 Exhaust Air Energy Recovery Requirements for Ventilation Systems Operating Not Less than 8000 Hours Per Year* [ASHRAE 90.1: Table 6.5.6.1-2] <\/td>\n<\/tr>\n
445<\/td>\nE 503.5.11.2 \u2014 Kitchen Exhaust Systems.
E 503.5.11.2.1 \u2014 Exhaust Flow Rate.
E 503.5.11.2.2 \u2014 Kitchen or Dining Facility.
E 503.5.11.2.3 \u2014 Performance Testing.
Table E 503.5.11.2.1 \u2014 Maximum Net Exhaust Flow Rate, CFM Per Linear Foot of Hood Length [ASHRAE 90.1: Table 6.5.7.2.2] <\/td>\n<\/tr>\n
446<\/td>\nE 503.5.11.3 \u2014 Laboratory Exhaust Systems.
E 503.5.12 \u2014 Radiant Heating Systems.
E 503.5.12.1 \u2014 Heating Enclosed Spaces.
E 503.5.13 \u2014 Hot Gas Bypass Limitation.
E 503.5.14 \u2014 Door Switches.
E 503.6 \u2014 Submittals.
E 503.6.1 \u2014 Construction Details.
E 503.6.2 \u2014 Supplemental Information.
Table E 503.5.13 \u2014 Hot Gas Bypass Limitation [ASHRAE 90.1: Table 6.5.9] <\/td>\n<\/tr>\n
447<\/td>\nE 503.6.3 \u2014 Manuals.
E 503.6.3.1 \u2014 Required Information.
E 503.6.3.2 \u2014 Lighting Manuals.
E 503.6.4 \u2014 Labeling of Material and Equipment.
E 503.6.5 \u2014 Completion Requirements.
E 503.6.5.1 \u2014 Drawings.
E 503.6.5.2 \u2014 Manuals.
E 503.6.5.3 \u2014 System Balancing.
E 503.6.5.3.1 \u2014 Air System Balancing.
E 503.6.5.3.2 \u2014 Hydronic System Balancing. <\/td>\n<\/tr>\n
448<\/td>\nE 503.6.5.4 \u2014 System Commissioning.
E 503.6.5.4.1 \u2014 Minimum Level of Commission.
E 503.7 \u2014 Minimum Equipment Efficiency Tables.
E 503.7.1 \u2014 Minimum Efficiency Requirement Listed Equipment \u2013 Standard Rating and Operating Conditions.
E 503.7.2 \u2014 Duct Insulation Tables.
E 503.7.3 \u2014 Pipe Insulation Tables.
E 503.8 \u2014 Alternative Compliance Path.
E 503.8.1 \u2014 Computer Room (PUE1).
E 503.8.2 \u2014 Computer Room (PUE0).
E 503.8.3 \u2014 Documentation.
E 504.0 \u2014 Solar Energy Systems.
E 504.1 \u2014 General.
Table E 503.8.1 \u2014 Power Usage Effectiveness (PUE) Maximum [ASHRAE 90.1: Table 6.6.1] <\/td>\n<\/tr>\n
449<\/td>\nTable E 503.7.1(1) \u2014 Electrically Operated Unitary Air Conditioners and Condensing Units Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-1] <\/td>\n<\/tr>\n
451<\/td>\nTable E 503.7.1(2) \u2014 Electrically Operated Unitary and Applied Heat Pumps Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-2] <\/td>\n<\/tr>\n
453<\/td>\nTable E 503.7.1(3) \u2014 Water-Chilling Packages \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-3] <\/td>\n<\/tr>\n
454<\/td>\nTable E 503.7.1(4) \u2014 Electrically Operated Packaged Terminal Air Conditioners, Packaged Terminal Heat Pumps, Single-Package Vertical Air Conditioners, Single-Package Vertical Heat Pumps, Room Air Conditioners, and Room Air Conditioner Heat Pumps \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-4] <\/td>\n<\/tr>\n
455<\/td>\nTable E 503.7.1(5) \u2014 Warm-Air Furnaces and Combination Warm-Air Furnaces\/Air-Conditioning Units, Warm-Air Duct Furnaces, And Unit Heaters \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-5] <\/td>\n<\/tr>\n
456<\/td>\nTable E 503.7.1(6) \u2014 Gas- And Oil-Fired Boilers \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-6] <\/td>\n<\/tr>\n
457<\/td>\nTable E 503.7.1(7) \u2014 Performance Requirements For Heat Rejection Equipment Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-7] <\/td>\n<\/tr>\n
458<\/td>\nTable E 503.7.1(8) \u2014 Heat Transfer Equipment \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-8]
Table E 503.7.1(9) \u2014 Electrically Operated Variable-Refrigerant-Flow Air Conditioners \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-9] <\/td>\n<\/tr>\n
459<\/td>\nTable E 503.7.1(10) \u2014 Electrically Operated Variable-Refrigerant-Flow and Applied Heat Pumps \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-10] <\/td>\n<\/tr>\n
461<\/td>\nTable E 503.7.1(11) \u2014 Air Conditioners and Condensing Units Serving Computer Rooms Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-11] <\/td>\n<\/tr>\n
462<\/td>\nTable E 503.7.1(12) \u2014 Commercial Refrigerator and Freezers \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-12] <\/td>\n<\/tr>\n
463<\/td>\nTable E 503.7.1(13) \u2014 Commercial Refrigeration \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-13] <\/td>\n<\/tr>\n
464<\/td>\nTable E 503.7.1(14) \u2014 Vapor Compression Based Indoor Pool Dehumidifiers \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-14]
Table E 503.7.1(15) \u2014 Electrically Operated DX-DOAS Units, Single-Package And Remote Condenser, Without Energy Recovery \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-15]
Table E 503.7.1(16) \u2014 Electrically Operated DX-DOAS Units, Single Package And Remote Condenser, With Energy Recovery \u2013 Minimum Efficiency Requirements [ASHRAE 90.1: Table 6.8.1-16] <\/td>\n<\/tr>\n
465<\/td>\nTable E 503.7.2 \u2014 Minimum Duct Insulation R-Value [ASHRAE 90.1:Table 6.8.2]
Table E 503.7.3(1) \u2014 Minimum Pipe Insulation Thickness for Heating and Hot Water Systems (Steam, Steam Condensate, Hot Water Heating, and Domestic Water Systems) [ASHRAE 90.1: Table 6.8.3-1] <\/td>\n<\/tr>\n
466<\/td>\nE 601.0 \u2014 Indoor Environment.
E 601.1 \u2014 Scope.
E 602.0 \u2014 Fireplaces.
E 602.1 \u2014 Requirements.
E 602.1.1 \u2014 Masonry or Factory-Built Fireplace.
E 602.1.1.1 \u2014 Opening Cover.
E 602.1.1.2 \u2014 Combustion Air Intake.
E 602.1.1.3 \u2014 Accessible Damper Control.
E 602.1.2 \u2014 Prohibited.
E 603.0 \u2014 Pollutant Control.
E 603.1 \u2014 Indoor Air Quality During Construction.
E 603.1.1 \u2014 Temporary Ventilation During Construction.
Table E 503.7.3(2) \u2014 Minimum Pipe Insulation Thickness for Cooling Systems (Chilled Water, Brine, and Refrigerant) [ASHRAE 90.1: Table 6.8.3-2] <\/td>\n<\/tr>\n
467<\/td>\nE 603.1.2 \u2014 Indoor Air Quality After Construction.
E 603.1.3 \u2014 Covering of Duct Openings and Protection of Mechanical Equipment During Construction.
E 603.2 \u2014 Isolation of Pollutant Sources.
E 603.3 \u2014 Filters.
E 603.4 \u2014 Ozone Depletion and Global Warming Reductions.
E 604.0 \u2014 Indoor Moisture Control.
E 604.1 \u2014 Rainwater Control.
E 605.0 \u2014 Indoor Air Quality for Low-Rise Residential.
E 605.1 \u2014 General.
E 605.1.1 \u2014 Natural Ventilation.
E 605.1.1.1 \u2014 Access to Operable Openings.
E 605.1.2 \u2014 Mechanical Ventilation.
E 605.1.3 \u2014 Dwelling-Unit Ventilation.
E 605.1.3.1 \u2014 Total Ventilation Rate.
E 605.1.3.2 \u2014 Effective Annual Average Infiltration Rate (Qinf). <\/td>\n<\/tr>\n
468<\/td>\nE 605.1.3.3 \u2014 Required Mechanical Ventilation Rate (Qfan).
E 605.1.3.4 \u2014 Different Occupant Density.
E 605.1.4 \u2014 System Type.
E 605.1.5 \u2014 Airflow Measurement.
E 605.1.6 \u2014 Control and Operation.
E 605.1.7 \u2014 Variable Mechanical Ventilation.
E 605.1.7.1 \u2014 Short-Term Average Ventilation.
E 605.1.7.2 \u2014 Scheduled Ventilation.
E 605.1.7.2.1 \u2014 Annual Average Schedule.
E 605.1.7.2.2 \u2014 Block Scheduling. <\/td>\n<\/tr>\n
469<\/td>\nE 605.1.7.3 \u2014 Real-Time Control.
E 605.1.8 \u2014 Equivalent Ventilation.
E 605.2 \u2014 Bathroom Exhaust Fans.
E 605.3 \u2014 Filters.
E 606.0 \u2014 Indoor Air Quality for Other than Low-Rise Residential Buildings.
E 606.1 \u2014 Minimum Indoor Air Quality.
E 607.0 \u2014 Environmental Comfort.
E 607.1 \u2014 Thermal Comfort Controls.
E 607.2 \u2014 Heating and Air-Conditioning System Design.
E 608.0 \u2014 Low VOC Solvent Cement and Primer.
E 608.1 \u2014 General.
E 608.1.1 \u2014 Solvent Cement.
E 608.1.2 \u2014 Primer.
Table E 605.1.3.1 \u2014 Ventilation Air Requirements, (cubic foot per minute) [ASHRAE 62.2: Table 4.1a] <\/td>\n<\/tr>\n
470<\/td>\nE 701.0 \u2014 Installer Qualifications.
E 701.1 \u2014 Scope.
E 702.0 \u2014 Qualifications.
E 702.1 \u2014 General.
Part I
E 801.0 \u2014 Heating, Ventilation, and Air Conditioning Systems Commissioning.
E 801.1 \u2014 Applicability.
E 802.0 \u2014 Commissioning.
E 802.1 \u2014 Commissioning Requirements.
E 802.2 \u2014 Owner\u2019s Project Requirements (OPR).
E 802.3 \u2014 Basis of Design (BOD).
E 802.4 \u2014 Commissioning Plan.
E 802.5 \u2014 Functional Performance Testing.
E 802.6 \u2014 Post Construction Documentation and Training.
E 802.6.1 \u2014 Systems Manual. <\/td>\n<\/tr>\n
471<\/td>\nE 802.6.2 \u2014 Systems Operations Training.
E 802.7 \u2014 Commissioning Report.
Part II
E 803.0 \u2014 Commissioning Acceptance.
E 803.1 \u2014 General.
E 803.2 \u2014 Construction Documents.
E 803.2.1 \u2014 Roles and Responsibilities.
E 803.2.1.1 \u2014 Field Technician.
E 803.2.1.2 \u2014 Responsible Person.
E 803.2.1.3 \u2014 Certificate of Acceptance.
E 804.0 \u2014 Commissioning Tests.
E 804.1 \u2014 General.
E 804.2 \u2014 Tests. <\/td>\n<\/tr>\n
472<\/td>\nE 804.3 \u2014 Acceptance Process.
E 804.3.1 \u2014 Plan Review.
E 804.3.2 \u2014 Construction Inspection.
E 804.3.3 \u2014 Acceptance Testing.
E 804.3.4 \u2014 Certificate of Occupancy.
E 805.0 \u2014 HVAC System Tests.
E 805.1 \u2014 Variable Air Volume Systems (Form MECH-2A).
E 805.1.1 \u2014 Test Procedure.
E 805.1.1.1 \u2014 Construction Inspection.
E 805.1.1.2 \u2014 Functional Testing. <\/td>\n<\/tr>\n
473<\/td>\nE 805.1.2 \u2014 Acceptance Criteria.
E 805.2 \u2014 Constant Volume Systems (Form MECH-2A).
E 805.2.1 \u2014 Test Procedure.
E 805.2.1.1 \u2014 Construction Inspection.
E 805.2.1.2 \u2014 Functional Testing.
E 805.2.2 \u2014 Acceptance Criteria.
E 805.3 \u2014 Constant Volume, Single-Zone, Unitary Air Conditioner and Heat Pumps Systems Acceptance (Form MECH-3A).
E 805.3.1 \u2014 Test Procedure.
E 805.3.1.1 \u2014 Construction Inspection.
E 805.3.1.2 \u2014 Functional Testing. <\/td>\n<\/tr>\n
474<\/td>\nE 805.3.2 \u2014 Acceptance Criteria.
E 805.4 \u2014 Air Distribution Systems (Form MECH-4A).
E 805.4.1 \u2014 Test Procedure.
E 805.4.1.1 \u2014 Construction Inspection.
E 805.4.1.2 \u2014 Functional Testing.
E 805.4.2 \u2014 Acceptance Criteria.
E 805.5 \u2014 Air Economizer Controls Acceptance (Form MECH-5A).
E 805.5.1 \u2014 Test Procedure.
E 805.5.1.1 \u2014 Construction Inspection. <\/td>\n<\/tr>\n
475<\/td>\nE 805.5.1.2 \u2014 Functional Testing.
E 805.5.2 \u2014 Acceptance Criteria.
E 805.6 \u2014 Demand-Controlled Ventilation Systems Acceptance (Form MECH-6A).
E 805.6.1 \u2014 Test Procedure.
E 805.6.1.1 \u2014 Construction Inspection.
E 805.6.1.2 \u2014 Functional Testing. <\/td>\n<\/tr>\n
476<\/td>\nE 805.6.2 \u2014 Acceptance Criteria.
E 805.7 \u2014 Supply Fan Variable Flow Controls (Form MECH-7A).
E 805.7.1 \u2014 Test Procedure.
E 805.7.1.1 \u2014 Construction Inspection.
E 805.7.1.2 \u2014 Functional Testing.
E 805.7.2 \u2014 Acceptance Criteria. <\/td>\n<\/tr>\n
477<\/td>\nE 805.8 \u2014 Valve Leakage (Form MECH-8A).
E 805.8.1 \u2014 Test Procedure.
E 805.8.1.1 \u2014 Construction Inspection.
E 805.8.1.2 \u2014 Functional Testing.
E 805.8.2 \u2014 Acceptance Criteria.
E 805.9 \u2014 Supply Water Temperature Reset Controls (Form MECH-9A).
E 805.9.1 \u2014 Test Procedure.
E 805.9.1.1 \u2014 Construction Inspection.
E 805.9.1.2 \u2014 Functional Testing.
E 805.9.2 \u2014 Acceptance Criteria.
E 805.10 \u2014 Hydronic System Variable Flow Controls (Form MECH-10A). <\/td>\n<\/tr>\n
478<\/td>\nE 805.10.1 \u2014 Test Procedure.
E 805.10.1.1 \u2014 Construction Inspection.
E 805.10.1.2 \u2014 Functional Testing.
E 805.10.2 \u2014 Acceptance Criteria.
E 805.11 \u2014 Automatic Demand Shed Control (Form MECH-11A).
E 805.11.1 \u2014 Test Procedure.
E 805.11.1.1 \u2014 Construction Inspection.
E 805.11.1.2 \u2014 Functional Testing.
E 805.11.2 \u2014 Acceptance Criteria.
E 805.12 \u2014 Fault Detection and Diagnostics (FDD) for Packaged Direct-Expansion (DX) Units (Form MECH-12A).
E 805.12.1 \u2014 Test Procedure.
E 805.12.1.1 \u2014 Construction Inspection. <\/td>\n<\/tr>\n
479<\/td>\nE 805.12.1.2 \u2014 Functional Testing.
E 805.12.2 \u2014 Acceptance Criteria.
E 805.13 \u2014 Automatic Fault Detection Diagnostics (FDD) for Air Handling Units (AHU) and Zone Terminal Units (Form MECH-13A).
E 805.13.1 \u2014 Test Procedure.
E 805.13.1.1 \u2014 Functional Testing.
E 805.13.1.1.1 \u2014 Functional Testing for Air Handling Units. <\/td>\n<\/tr>\n
480<\/td>\nE 805.13.1.1.2 \u2014 Functional Testing for Zone Terminal Units.
E 805.13.2 \u2014 Acceptance Criteria.
E 805.14 \u2014 Distributed Energy Storage DX AC System (Form MECH-14A). <\/td>\n<\/tr>\n
481<\/td>\nE 805.14.1 \u2014 Test Procedure.
E 805.14.1.1 \u2014 Construction Inspection.
E 805.14.1.2 \u2014 Functional Testing.
E 805.14.1.3 \u2014 Calibrating Controls.
E 805.14.2 \u2014 Acceptance Criteria.
E 805.15 \u2014 Thermal Energy Storage (TES) System (Form MECH-15A).
E 805.15.1 \u2014 Test Procedure.
E 805.15.1.1 \u2014 Construction Inspection. <\/td>\n<\/tr>\n
482<\/td>\nE 805.15.1.2 \u2014 Functional Testing.
E 805.15.2 \u2014 Acceptance Criteria. <\/td>\n<\/tr>\n
483<\/td>\nE 806.0 \u2014 Certificate of Acceptance Forms.
E 806.1 \u2014 General. <\/td>\n<\/tr>\n
484<\/td>\nFORMS
MECH-2A <\/td>\n<\/tr>\n
487<\/td>\nMECH-3A <\/td>\n<\/tr>\n
490<\/td>\nMECH-4A <\/td>\n<\/tr>\n
493<\/td>\nMECH-5A <\/td>\n<\/tr>\n
496<\/td>\nMECH-6A <\/td>\n<\/tr>\n
499<\/td>\nMECH-7A <\/td>\n<\/tr>\n
501<\/td>\nMECH-8A <\/td>\n<\/tr>\n
503<\/td>\nMECH-9A <\/td>\n<\/tr>\n
505<\/td>\nMECH-10A <\/td>\n<\/tr>\n
508<\/td>\nMECH-11A <\/td>\n<\/tr>\n
510<\/td>\nMECH-12A <\/td>\n<\/tr>\n
513<\/td>\nMECH-13A <\/td>\n<\/tr>\n
517<\/td>\nMECH-14A <\/td>\n<\/tr>\n
520<\/td>\nMECH-15A <\/td>\n<\/tr>\n
524<\/td>\nAppendix F \u2014 Geothermal Energy Systems <\/td>\n<\/tr>\n
526<\/td>\nPart I \u2013 General.
F 101.0 \u2014 General.
F 101.1 \u2014 Applicability.
F 101.1.1 \u2014 Prior to Construction.
F 101.1.2 \u2014 Equipment, Accessories, Components, and Materials.
F 101.2 \u2014 Construction Documents.
F 101.3 \u2014 Site Survey.
F 101.4 \u2014 Used Materials.
F 101.5 \u2014 Contact with Building Material.
F 101.6 \u2014 Strains and Stresses.
F 101.7 \u2014 Flood Hazard.
F 101.8 \u2014 Pipe Support.
F 101.9 \u2014 Velocities.
F 101.10 \u2014 Chemical Compatibility.
F 101.11 \u2014 Transfer Fluid.
F 102.0 \u2014 Definitions.
F 103.0 \u2014 Groundwater Systems.
F 103.1 \u2014 General. <\/td>\n<\/tr>\n
527<\/td>\nF 104.0 \u2014 Design of Systems.
F 104.1 \u2014 Ground-Heat Exchanger Design.
F 104.2 \u2014 Piping and Tubing Materials Standards.
F 104.3 \u2014 Fittings.
F 104.4 \u2014 Underground Piping and Submerged Materials.
F 104.4.1 \u2014 Polyethylene (PE).
F 104.4.1.1 \u2014 Joining Methods for Polyethylene Pipe or Tubing.
F 104.4.2 \u2014 Cross-Linked Polyethylene (PEX).
F 104.4.2.1 \u2014 Joining Methods for Cross-Linked Polyethylene Tubing.
F 104.5 \u2014 Indoor Piping.
F 105.0 \u2014 Heat Pumps.
F 105.1 \u2014 Heat Pump Distribution System.
Tables
Table F 104.2 \u2014 Plastic Ground Source Loop Piping
Table F 104.3 \u2014 Ground Source Loop Fittings <\/td>\n<\/tr>\n
528<\/td>\nF 105.2 \u2014 Circulating Pumps.
F 106.0 \u2014 Valves.
F 106.1 \u2014 Where Required.
F 106.2 \u2014 Heat Exchangers.
F 106.3 \u2014 Central Systems.
F 106.4 \u2014 Pressure Vessels.
F 106.5 \u2014 Pressure-Reducing Valves.
F 106.6 \u2014 Equipment and Appliances.
F 106.7 \u2014 Expansion Tanks.
F 106.8 \u2014 Reduced Pressure.
F 107.0 \u2014 Specific System Components Design.
F 107.1 \u2014 General.
F 107.2 \u2014 Heat Exchangers.
F 107.3 \u2014 Heat-Transfer Medium.
F 107.4 \u2014 Insulation.
F 108.0 \u2014 Installation Practices.
F 108.1 \u2014 Prior to Construction.
F 108.2 \u2014 Equipment, Accessories, Components, and Materials.
F 108.3 \u2014 Construction Documents.
F 108.4 \u2014 Site Survey Requirements. <\/td>\n<\/tr>\n
529<\/td>\nF 108.5 \u2014 Subsurface Investigation.
F 108.6 \u2014 Subsurface Conditions.
F 108.7 \u2014 Ground-Heat Exchanger Installation Practices.
F 108.8 \u2014 Trenching, Excavation, and Backfill.
F 108.9 \u2014 Trenches, Tunneling, and Driving.
F 108.10 \u2014 Excavations and Open Trenches.
F 108.11 \u2014 Protection of Piping, Materials, and Structures.
F 108.12 \u2014 Sleeves.
F 108.13 \u2014 Steel Nail Plates.
F 108.14 \u2014 Exterior Piping Protection.
F 108.15 \u2014 Heat Pump and Distribution System Installation.
F 108.16 \u2014 Pressurizing During Installation. <\/td>\n<\/tr>\n
530<\/td>\nF 108.17 \u2014 Horizontal Geothermal Piping – Materials and Methods.
F 108.17.1 \u2014 Piping Material.
F 108.17.2 \u2014 Dissimilar Materials.
F 108.17.3 \u2014 Protection of Piping.
F 108.18 \u2014 Trenches, Excavation, and Backfill.
F 108.18.1 \u2014 Trenches.
F 108.18.2 \u2014 Buried Systems.
F 108.18.3 \u2014 Pipe Installation.
F 108.18.4 \u2014 Separation.
F 108.18.5 \u2014 Insulation.
F 108.18.6 \u2014 Pipe Bends.
F 108.18.7 \u2014 Closed Cell Insulation.
F 108.18.8 \u2014 Tracer Markings.
F 109.0 \u2014 System Start-Up.
F 109.1 \u2014 General.
F 109.2 \u2014 Operation and Maintenance Manual.
F 109.3 \u2014 Labeling and Marking. <\/td>\n<\/tr>\n
531<\/td>\nF 109.4 \u2014 Documentation.
F 109.5 \u2014 Maintenance.
F 109.6 \u2014 Records.
F 109.7 \u2014 System Start-Up.
F 109.8 \u2014 Contaminants.
F 110.0 \u2014 Decommissioning and Abandonment.
F 110.1 \u2014 General.
Part II \u2013 Closed-Loop Systems.
F 201.0 \u2014 General.
F 201.1 \u2014 Applicability.
F 201.2 \u2014 Piping and Tubing.
F 201.3 \u2014 Borehole Piping and Tubing.
F 201.4 \u2014 Underground Fittings.
F 201.5 \u2014 Verification.
F 201.6 \u2014 Vertical Bores.
F 201.6.1 \u2014 Backfill.
F 201.6.2 \u2014 U-Bends and Headers.
F 201.6.2.1 \u2014 Test Pressure.
F 201.6.2.2 \u2014 Testing Procedure.
F 201.6.2.3 \u2014 Calculation of Static Pressure (Water).
F 201.6.2.4 \u2014 Calculation of Static Pressure (Other Fluids). <\/td>\n<\/tr>\n
532<\/td>\nF 202.0 \u2014 Ground-Heat Exchanger Testing.
F 202.1 \u2014 Testing.
F 202.2 \u2014 Individual Loop Pressure Testing.
F 202.3 \u2014 Field Pressure Testing \u2013 Final.
F 202.4 \u2014 Field Flow Testing \u2013 Final.
Part III \u2013 Open-Loop Systems.
F 301.0 \u2014 General.
F 301.1 \u2014 Applicability.
F 301.2 \u2014 Test Wells.
F 301.3 \u2014 Installation of Water Wells.
F 301.4 \u2014 Setbacks.
F 302.0 \u2014 Open Ground Water Systems.
F 302.1 \u2014 General.
F 302.2 \u2014 Open-Loop Water Well Drilling Logs.
F 302.3 \u2014 Design Considerations. <\/td>\n<\/tr>\n
533<\/td>\nF 302.4 \u2014 Water Wells and Injection Wells.
F 302.5 \u2014 Testing and Sampling.
F 302.6 \u2014 Disinfection.
F 303.0 \u2014 Testing and Verification.
F 303.1 \u2014 Pumping Test.
F 303.2 \u2014 Retesting.
F 303.3 \u2014 Variable Rate Pump Test.
F 303.4 \u2014 Constant Rate Pump Test.
F 303.5 \u2014 Water Level Monitoring.
F 303.6 \u2014 Injection Wells.
F 303.7 \u2014 Re-Injected Water.
Part IV \u2013 Direct Exchange (DX) Systems.
F 401.0 \u2014 Direct Exchange (DX) Systems.
F 401.1 \u2014 General.
F 401.2 \u2014 Applicability.
F 401.3 \u2014 DX Systems.
F 401.4 \u2014 DX System Testing.
F 401.5 \u2014 Indoor Piping.
F 401.6 \u2014 On Site Storage.
F 401.7 \u2014 System Start-Up. <\/td>\n<\/tr>\n
534<\/td>\nF 401.8 \u2014 DX Piping. <\/td>\n<\/tr>\n
536<\/td>\nAppendix G \u2014 Sizing of Venting Systems and Outdoor Combustion and Ventilation Opening Design <\/td>\n<\/tr>\n
538<\/td>\nG 101.0 \u2014 General.
G 101.1 \u2014 Applicability.
G 101.2 \u2014 Examples Using Single Appliance Venting Tables.
Figures
Figure G 101.2(1) \u2014 Type B Double-Wall Vent System Serving a Single Applicance with a Type B Double-Wall Vent
Figure G 101.2(2) \u2014 Type B Double-Wall Vent System Serving a Single Appliance with a Single-Wall Metal Vent Connector
Figure G 101.2(3) \u2014 Vent System Serving a Single Appliance with a Masonry Chimney and a Type B Double-Wall Vent Connector
Figure G 101.2(4) \u2014 Vent System Serving a Single Appliance Using a Masonry Chimney and a Single-Wall Metal Vent Connector <\/td>\n<\/tr>\n
539<\/td>\nFigure G 101.2(5) \u2014 Asbestos Cement Type B or Single-Wall Metal Vent System Serving a Single Draft Hood-Equipped Appliance
Figure G 101.2(6) \u2014 Vent System Serving Two or More Appliances with Type B Double-Wall Vent and Type B Double-Wall Vent Connectors
Figure G 101.2(7) \u2014 Vent System Serving Two or More Appliances with Type B Double-Wall Vent and Single-Wall Metal Vent Connectors
Figure G 101.2(8) \u2014 Masonry Chimney Serving Two or More Appliances with Type B Double-Wall Vent Connectors <\/td>\n<\/tr>\n
540<\/td>\nFigure G 101.2(9) \u2014 Masonry Chimney Serving Two or More Appliances with Single-Wall Metal Vent Connectors
Figure G 101.2(10) \u2014 Asbestos Cement Type B or Single-Wall Metal Vent System Serving Two or More Draft Hood-Equipped Appliances
Figure G 101.2(11) \u2014 Use of Manifolded Common Vent Connector
Figure G 101.2(12) \u2014 Use of Offset Common Vent <\/td>\n<\/tr>\n
541<\/td>\nG 101.3 \u2014 Example 1: Single Draft Hood-Equipped Appliance.
Figure G 101.2(13) \u2014 Multistory Gas Vent Design Procedure for Each Segment of System
Figure G 101.2(14) \u2014 Principles of Design of Multistory Vents Using Vent Connector and Common Vent Design Talbes [See Section 803.2.13 through Section 803.2.16] <\/td>\n<\/tr>\n
542<\/td>\nG 101.4 \u2014 Example 2: Single Fan-Assisted Appliance.
G 101.5 \u2014 Example 3: Interpolating Between Table Values.
Figure G 101.3 \u2014 Single Draft Hood-Equipped Appliance – Example 1
Figure G 101.4 \u2014 Single Fan-Assisted Appliance – Example 2 <\/td>\n<\/tr>\n
543<\/td>\nG 102.0 \u2014 Examples Using Common Venting Tables.
G 102.1 \u2014 Example 4: Common Venting Two Draft Hood-Equipped Appliances.
G 102.2 \u2014 Example 5(a): Common Venting a Draft Hood-Equipped Water Heater with a Fan-Assisted Furnace into a Type B Vent.
Figure G 102.1 \u2014 Common Venting Two Draft Hood-Equipped Appliances – Example 4 <\/td>\n<\/tr>\n
544<\/td>\nG 102.3 \u2014 Example 5(b): Common Venting into an Interior Masonry Chimney.
G 102.4 \u2014 Example 5(c): Common Venting into an Exterior Masonry Chimney.
Figure G 102.2 \u2014 Common Venting a Draft Hood-Equipped Water Heater with a Fan-Assisted Furnace Into a Type B Double-Wall Common Vent – Example 5(a) <\/td>\n<\/tr>\n
545<\/td>\nTables
Table G 102.3 \u2014 Masonry Chimney Liner Dimensions with Circular Equivalents* <\/td>\n<\/tr>\n
546<\/td>\nG 103.0 \u2014 Example of Combination Indoor and Outdoor Combustion Air Opening Design. <\/td>\n<\/tr>\n
547<\/td>\nTable G 103.0 \u2014 Standard Method: Required Volume, All Appliances <\/td>\n<\/tr>\n
548<\/td>\nAppendix H \u2014 Example Calculation of Outdoor Air Rate <\/td>\n<\/tr>\n
550<\/td>\nH 101.0 \u2014 Example Calculation of Outdoor Air Rate.
H 101.1 \u2014 Example Calculation. <\/td>\n<\/tr>\n
552<\/td>\nUseful Tables
Unit Conversions <\/td>\n<\/tr>\n
556<\/td>\nSl Symbols and Prefixes <\/td>\n<\/tr>\n
558<\/td>\nApproximate Minimum Thickness for Carbon Sheet Steel Corresponding to Manufacturer\u2019s Standard Gauge and Galvanized Sheet Gauge Numbers <\/td>\n<\/tr>\n
560<\/td>\nIndex
\u2013 A \u2013 <\/td>\n<\/tr>\n
561<\/td>\n\u2013 B \u2013 <\/td>\n<\/tr>\n
562<\/td>\n\u2013 C \u2013 <\/td>\n<\/tr>\n
564<\/td>\n\u2013 D \u2013 <\/td>\n<\/tr>\n
565<\/td>\n\u2013 E \u2013 <\/td>\n<\/tr>\n
566<\/td>\n\u2013 F \u2013 <\/td>\n<\/tr>\n
567<\/td>\n\u2013 G \u2013 <\/td>\n<\/tr>\n
568<\/td>\n\u2013 H \u2013 <\/td>\n<\/tr>\n
569<\/td>\n\u2013 I \u2013 <\/td>\n<\/tr>\n
570<\/td>\n\u2013 J \u2013
\u2013 K \u2013
\u2013 L \u2013
\u2013 M \u2013 <\/td>\n<\/tr>\n
571<\/td>\n\u2013 N \u2013
\u2013 O \u2013
\u2013 P \u2013 <\/td>\n<\/tr>\n
573<\/td>\n\u2013 R \u2013 <\/td>\n<\/tr>\n
574<\/td>\n\u2013 S \u2013 <\/td>\n<\/tr>\n
575<\/td>\n\u2013 T \u2013
\u2013 U \u2013
\u2013 V \u2013 <\/td>\n<\/tr>\n
576<\/td>\n\u2013 W \u2013
\u2013 Z \u2013 <\/td>\n<\/tr>\n
578<\/td>\nHistory Note <\/td>\n<\/tr>\n
580<\/td>\nLicense Agreement <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

California Mechanical Code, Title 24, Part 4 (W\/ SUPPLEMENT)<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
CA<\/b><\/a><\/td>\n2022<\/td>\n581<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":416789,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[2720],"product_tag":[],"class_list":{"0":"post-416780","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-ca","8":"first","9":"instock","10":"sold-individually","11":"shipping-taxable","12":"purchasable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/416780","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/416789"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=416780"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=416780"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=416780"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}