{"id":465598,"date":"2024-10-20T10:41:21","date_gmt":"2024-10-20T10:41:21","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/icc-imc-2021-1stptg-2\/"},"modified":"2024-10-26T19:42:46","modified_gmt":"2024-10-26T19:42:46","slug":"icc-imc-2021-1stptg-2","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/icc\/icc-imc-2021-1stptg-2\/","title":{"rendered":"ICC IMC 2021 1stptg"},"content":{"rendered":"

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC\u00ae include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake\/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.<\/p>\n

PDF Catalog<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
PDF Pages<\/th>\nPDF Title<\/th>\n<\/tr>\n
1<\/td>\n2021 IMC\u00ae INTERNATIONAL MECHANICAL CODE\u00ae <\/td>\n<\/tr>\n
2<\/td>\n2021 IMC\u00ae INTERNATIONAL MECHANICAL CODE\u00ae TITLE PAGE <\/td>\n<\/tr>\n
3<\/td>\nCOPYRIGHT <\/td>\n<\/tr>\n
4<\/td>\nPREFACE <\/td>\n<\/tr>\n
10<\/td>\nARRANGEMENT AND FORMAT OF THE 2021 IMC <\/td>\n<\/tr>\n
14<\/td>\nTABLE OF CONTENTS <\/td>\n<\/tr>\n
18<\/td>\nCHAPTER 1 SCOPE AND ADMINISTRATION
PART 1\u2014SCOPE AND APPLICATION
SECTION 101 SCOPE AND GENERAL REQUIREMENTS
SECTION 102 APPLICABILITY <\/td>\n<\/tr>\n
19<\/td>\nPART 2\u2014ADMINISTRATION AND ENFORCEMENT
SECTION 103 CODE COMPLIANCE AGENCY
SECTION 104 DUTIES AND POWERS OF THE CODE OFFICIAL <\/td>\n<\/tr>\n
20<\/td>\nSECTION 105 APPROVAL <\/td>\n<\/tr>\n
21<\/td>\nSECTION 106 PERMITS <\/td>\n<\/tr>\n
22<\/td>\nSECTION 107 CONSTRUCTION DOCUMENTS
SECTION 108 NOTICE OF APPROVAL
SECTION 109 FEES <\/td>\n<\/tr>\n
23<\/td>\nSECTION 110 SERVICE UTILITIES
SECTION 111 TEMPORARY EQUIPMENT, SYSTEMS AND USES
SECTION 112 INSPECTIONS AND TESTING <\/td>\n<\/tr>\n
24<\/td>\nSECTION 113 MEANS OF APPEALS <\/td>\n<\/tr>\n
25<\/td>\nSECTION 114 BOARD OF APPEALS
SECTION 115 VIOLATIONS
SECTION 116 STOP WORK ORDER <\/td>\n<\/tr>\n
28<\/td>\nCHAPTER 2 DEFINITIONS
SECTION 201 GENERAL
SECTION 202 GENERAL DEFINITIONS <\/td>\n<\/tr>\n
40<\/td>\nCHAPTER 3 GENERAL REGULATIONS
SECTION 301 GENERAL <\/td>\n<\/tr>\n
41<\/td>\nSECTION 302 PROTECTION OF STRUCTURE <\/td>\n<\/tr>\n
42<\/td>\nSECTION 303 EQUIPMENT AND APPLIANCE LOCATION
SECTION 304 INSTALLATION <\/td>\n<\/tr>\n
44<\/td>\nSECTION 305 PIPING SUPPORT
TABLE 305.4 PIPING SUPPORT SPACINGa
SECTION 306 ACCESS AND SERVICE SPACE <\/td>\n<\/tr>\n
46<\/td>\nSECTION 307 CONDENSATE DISPOSAL <\/td>\n<\/tr>\n
47<\/td>\nTABLE 307.2.2 CONDENSATE DRAIN SIZING
SECTION 308 CLEARANCE REDUCTION <\/td>\n<\/tr>\n
48<\/td>\nTABLE 308.4.2 CLEARANCE REDUCTION METHODSb <\/td>\n<\/tr>\n
49<\/td>\nSECTION 309 TEMPERATURE CONTROL
SECTION 310 EXPLOSION CONTROL
SECTION 311 SMOKE AND HEAT VENTS
SECTION 312 HEATING AND COOLING LOAD CALCULATIONS <\/td>\n<\/tr>\n
50<\/td>\nCHAPTER 4 VENTILATION
SECTION 401 GENERAL
TABLE 401.5 OPENING SIZES IN LOUVERS, GRILLES AND SCREENS PROTECTING AIR INTAKE OPENINGS
SECTION 402 NATURAL VENTILATION <\/td>\n<\/tr>\n
51<\/td>\nSECTION 403 MECHANICAL VENTILATION <\/td>\n<\/tr>\n
52<\/td>\nEQUATION 4-1
TABLE 403.3.1.1.1.2 ZONE AIR DISTRIBUTION EFFECTIVENESS
EQUATION 4-2
EQUATION 4-3
EQUATION 4-4 <\/td>\n<\/tr>\n
53<\/td>\nEQUATION 4-5
TABLE 403.3.1.1.2.3.2 SYSTEM VENTILATION EFFICIENCYa
EQUATION 4-6
EQUATION 4-7
EQUATION 4-8 <\/td>\n<\/tr>\n
54<\/td>\nEQUATION 4-9
TABLE 403.3.2.3 MINIMUM REQUIRED LOCAL EXHAUST RATES FOR GROUP R-2, R-3 AND R-4 OCCUPANCIES
SECTION 404 ENCLOSED PARKING GARAGES
SECTION 405 SYSTEMS CONTROL
SECTION 406 VENTILATION OF UNINHABITED SPACES <\/td>\n<\/tr>\n
55<\/td>\nSECTION 407 AMBULATORY CARE FACILITIES AND GROUP I-2 OCCUPANCIES
TABLE 403.3.1.1 MINIMUM VENTILATION RATES <\/td>\n<\/tr>\n
56<\/td>\nTABLE 403.3.1.1\u2014continued MINIMUM VENTILATION RATES <\/td>\n<\/tr>\n
57<\/td>\nTABLE 403.3.1.1\u2014continued MINIMUM VENTILATION RATES <\/td>\n<\/tr>\n
58<\/td>\nCHAPTER 5 EXHAUST SYSTEMS
SECTION 501 GENERAL <\/td>\n<\/tr>\n
59<\/td>\nSECTION 502 REQUIRED SYSTEMS
EQUATION 5-1 <\/td>\n<\/tr>\n
66<\/td>\nSECTION 503 MOTORS AND FANS
SECTION 504 CLOTHES DRYER EXHAUST <\/td>\n<\/tr>\n
67<\/td>\nTABLE 504.9.4.1 DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH <\/td>\n<\/tr>\n
68<\/td>\nSECTION 505 DOMESTIC COOKING EXHAUST EQUIPMENT <\/td>\n<\/tr>\n
69<\/td>\nSECTION 506 COMMERCIAL KITCHEN HOOD VENTILATION SYSTEM DUCTS AND EXHAUST EQUIPMENT <\/td>\n<\/tr>\n
74<\/td>\nSECTION 507 COMMERCIAL KITCHEN HOODS <\/td>\n<\/tr>\n
76<\/td>\nTABLE 507.2.8 MINIMUM DISTANCE BETWEEN THE LOWEST EDGE OF A GREASE FILTER AND THE COOKING SURFACE OR THE HEATING SURFACE <\/td>\n<\/tr>\n
77<\/td>\nSECTION 508 COMMERCIAL KITCHEN MAKEUP AIR
SECTION 509 FIRE SUPPRESSION SYSTEMS <\/td>\n<\/tr>\n
78<\/td>\nSECTION 510 HAZARDOUS EXHAUST SYSTEMS <\/td>\n<\/tr>\n
80<\/td>\nTABLE 510.8 MINIMUM DUCT THICKNESS
TABLE 510.8.2 CLEARANCE TO COMBUSTIBLES
SECTION 511 DUST, STOCK AND REFUSE CONVEYING SYSTEMS <\/td>\n<\/tr>\n
81<\/td>\nTABLE 511.2 CONSTRUCTION, CLEARANCE AND TERMINATION REQUIREMENTS FOR SINGLE-WALL METAL CHIMNEYS
SECTION 512 SUBSLAB SOIL EXHAUST SYSTEMS
SECTION 513 SMOKE CONTROL SYSTEMS <\/td>\n<\/tr>\n
83<\/td>\nEQUATION 5-2 <\/td>\n<\/tr>\n
84<\/td>\nEQUATION 5-3 <\/td>\n<\/tr>\n
85<\/td>\nSECTION 514 ENERGY RECOVERY VENTILATION SYSTEMS <\/td>\n<\/tr>\n
88<\/td>\nCHAPTER 6 DUCT SYSTEMS
SECTION 601 GENERAL <\/td>\n<\/tr>\n
89<\/td>\nSECTION 602 PLENUMS <\/td>\n<\/tr>\n
91<\/td>\nSECTION 603 DUCT CONSTRUCTION AND INSTALLATION <\/td>\n<\/tr>\n
92<\/td>\nTABLE 603.4 DUCT CONSTRUCTION MINIMUM SHEET METAL THICKNESS FOR SINGLE DWELLING UNITSa <\/td>\n<\/tr>\n
93<\/td>\nSECTION 604 INSULATION <\/td>\n<\/tr>\n
94<\/td>\nSECTION 605 AIR FILTERS
SECTION 606 SMOKE DETECTION SYSTEMS CONTROL <\/td>\n<\/tr>\n
95<\/td>\nSECTION 607 DUCT AND TRANSFER OPENINGS <\/td>\n<\/tr>\n
96<\/td>\n[BF] TABLE 607.3.2.1 FIRE DAMPER RATING <\/td>\n<\/tr>\n
101<\/td>\nSECTION 608 BALANCING <\/td>\n<\/tr>\n
102<\/td>\nCHAPTER 7 COMBUSTION AIR
SECTION 701 GENERAL <\/td>\n<\/tr>\n
104<\/td>\nCHAPTER 8 CHIMNEYS AND VENTS
SECTION 801 GENERAL <\/td>\n<\/tr>\n
105<\/td>\nSECTION 802 VENTS
TABLE 802.2 VENT APPLICATION <\/td>\n<\/tr>\n
106<\/td>\nSECTION 803 CONNECTORS
TABLE 803.9(1) MINIMUM CHIMNEY CONNECTOR THICKNESS FOR LOW-HEAT APPLIANCES
TABLE 803.9(2) MINIMUM CHIMNEY CONNECTOR THICKNESS FOR MEDIUM- AND HIGH-HEAT APPLIANCES <\/td>\n<\/tr>\n
107<\/td>\nTABLE 803.10.4 CHIMNEY CONNECTOR SYSTEMS AND CLEARANCES TOCOMBUSTIBLE WALL MATERIALS FOR DOMESTIC HEATING APPLIANCES
SECTION 804 DIRECT-VENT, INTEGRAL VENT AND MECHANICAL DRAFT SYSTEMS <\/td>\n<\/tr>\n
108<\/td>\nTABLE 803.10.6 CONNECTOR CLEARANCES TO COMBUSTIBLES <\/td>\n<\/tr>\n
109<\/td>\nSECTION 805 FACTORY-BUILT CHIMNEYS
SECTION 806 METAL CHIMNEYS <\/td>\n<\/tr>\n
110<\/td>\nCHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT
SECTION 901 GENERAL
SECTION 902 MASONRY FIREPLACES
SECTION 903 FACTORY-BUILT FIREPLACES
SECTION 904 PELLET FUEL-BURNING APPLIANCES
SECTION 905 FIREPLACE STOVES AND ROOM HEATERS
SECTION 906 FACTORY-BUILT BARBECUE APPLIANCES <\/td>\n<\/tr>\n
111<\/td>\nSECTION 907 INCINERATORS AND CREMATORIES
SECTION 908 COOLING TOWERS, EVAPORATIVE CONDENSERS AND FLUID COOLERS
SECTION 909 VENTED WALL FURNACES
SECTION 910 FLOOR FURNACES <\/td>\n<\/tr>\n
112<\/td>\nSECTION 911 DUCT FURNACES
SECTION 912 INFRARED RADIANT HEATERS
SECTION 913 CLOTHES DRYERS
SECTION 914 SAUNA HEATERS <\/td>\n<\/tr>\n
113<\/td>\nSECTION 915 ENGINE AND GAS TURBINE-POWERED EQUIPMENT AND APPLIANCES
SECTION 916 POOL AND SPA HEATERS
SECTION 917 COOKING APPLIANCES
SECTION 918 FORCED-AIR WARM-AIR FURNACES
SECTION 919 CONVERSION BURNERS
SECTION 920 UNIT HEATERS
SECTION 921 VENTED ROOM HEATERS
SECTION 922 KEROSENE AND OIL-FIRED STOVES <\/td>\n<\/tr>\n
114<\/td>\nSECTION 923 SMALL CERAMIC KILNS
SECTION 924 STATIONARY FUEL CELL POWER SYSTEMS
SECTION 925 MASONRY HEATERS
SECTION 926 GASEOUS HYDROGEN SYSTEMS
SECTION 927 RADIANT HEATING SYSTEMS
SECTION 928 EVAPORATIVE COOLING EQUIPMENT
SECTION 929 UNVENTED ALCOHOL FUEL-BURNING DECORATIVE APPLIANCES
SECTION 930 LARGE-DIAMETER CEILING FANS <\/td>\n<\/tr>\n
116<\/td>\nCHAPTER 10 BOILERS, WATER HEATERS AND PRESSURE VESSELS
SECTION 1001 GENERAL
SECTION 1002 WATER HEATERS
SECTION 1003 PRESSURE VESSELS
SECTION 1004 BOILERS <\/td>\n<\/tr>\n
117<\/td>\nTABLE 1004.3.1 BOILER TOP CLEARANCES
SECTION 1005 BOILER CONNECTIONS <\/td>\n<\/tr>\n
118<\/td>\nSECTION 1006 SAFETY AND PRESSURE RELIEF VALVES AND CONTROLS
SECTION 1007 BOILER LOW-WATER CUTOFF
SECTION 1008 BOTTOM BLOWOFF VALVE
SECTION 1009 HOT WATER BOILER EXPANSION TANK <\/td>\n<\/tr>\n
119<\/td>\nEQUATION 10-1
TABLE 1009.2 CLOSED-TYPE EXPANSION TANK SIZING
SECTION 1010 GAUGES
SECTION 1011 TESTS <\/td>\n<\/tr>\n
120<\/td>\nCHAPTER 11 REFRIGERATION
SECTION 1101 GENERAL
TABLE 1101.2 FACTORY-BUILT EQUIPMENT AND APPLIANCES
SECTION 1102 SYSTEM REQUIREMENTS <\/td>\n<\/tr>\n
121<\/td>\nSECTION 1103 REFRIGERATION SYSTEM CLASSIFICATION <\/td>\n<\/tr>\n
122<\/td>\nSECTION 1104 SYSTEM APPLICATION REQUIREMENTS <\/td>\n<\/tr>\n
123<\/td>\nTABLE 1103.1 REFRIGERANT CLASSIFICATION, AMOUNT AND OEL <\/td>\n<\/tr>\n
124<\/td>\nTABLE 1103.1\u2014continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL <\/td>\n<\/tr>\n
125<\/td>\nTABLE 1103.1\u2014continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL <\/td>\n<\/tr>\n
126<\/td>\nTABLE 1103.1\u2014continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL <\/td>\n<\/tr>\n
127<\/td>\nTABLE 1103.1\u2014continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL <\/td>\n<\/tr>\n
128<\/td>\nTABLE 1103.1\u2014continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL <\/td>\n<\/tr>\n
129<\/td>\nTABLE 1104.3.2 MAXIMUM PERMISSIBLE QUANTITIES OF REFRIGERANTS
SECTION 1105 MACHINERY ROOM, GENERAL REQUIREMENTS <\/td>\n<\/tr>\n
130<\/td>\nEQUATION 11-1
EQUATION 11-2
SECTION 1106 MACHINERY ROOM, SPECIAL REQUIREMENTS <\/td>\n<\/tr>\n
131<\/td>\nTABLE 1106.4.2 MINIMUM EXHAUST RATES
SECTION 1107 PIPING MATERIAL
TABLE 1107.4 REFRIGERANT PIPE <\/td>\n<\/tr>\n
132<\/td>\nTABLE 1107.5 REFRIGERANT PIPE FITTINGS
TABLE 1107.5.1 COPPER BRAZED SWAGED CUP DEPTHS
SECTION 1108 JOINTS AND CONNECTIONS <\/td>\n<\/tr>\n
133<\/td>\nSECTION 1109 REFRIGERANT PIPE INSTALLATION <\/td>\n<\/tr>\n
134<\/td>\nTABLE 1109.3.2 SHAFT VENTILATION VELOCITY <\/td>\n<\/tr>\n
135<\/td>\nSECTION 1110 REFRIGERATION PIPING SYSTEM TEST <\/td>\n<\/tr>\n
136<\/td>\n[F] SECTION 1111 PERIODIC TESTING <\/td>\n<\/tr>\n
138<\/td>\nCHAPTER 12 HYDRONIC PIPING
SECTION 1201 GENERAL
SECTION 1202 MATERIAL
TABLE 1202.4 HYDRONIC PIPE <\/td>\n<\/tr>\n
139<\/td>\nTABLE 1202.5 HYDRONIC PIPE FITTINGS
SECTION 1203 JOINTS AND CONNECTIONS <\/td>\n<\/tr>\n
141<\/td>\nSECTION 1204 PIPE INSULATION
SECTION 1205 VALVES
SECTION 1206 PIPING INSTALLATION <\/td>\n<\/tr>\n
142<\/td>\nSECTION 1207 TRANSFER FLUID
SECTION 1208 TESTS
SECTION 1209 EMBEDDED PIPING <\/td>\n<\/tr>\n
143<\/td>\nSECTION 1210 PLASTIC PIPE GROUND-SOURCE HEAT PUMP LOOP SYSTEMS
TABLE 1210.4 GROUND-SOURCE LOOP PIPE
TABLE 1210.5 GROUND-SOURCE LOOP PIPE FITTINGS <\/td>\n<\/tr>\n
146<\/td>\nCHAPTER 13 FUEL OIL PIPING AND STORAGE
SECTION 1301 GENERAL
SECTION 1302 MATERIAL
TABLE 1302.3 FUEL OIL PIPING AND FITTINGS
SECTION 1303 JOINTS AND CONNECTIONS <\/td>\n<\/tr>\n
147<\/td>\nSECTION 1304 PIPING SUPPORT
SECTION 1305 FUEL OIL SYSTEM INSTALLATION <\/td>\n<\/tr>\n
148<\/td>\nSECTION 1306 OIL GAUGING
SECTION 1307 FUEL OIL VALVES
SECTION 1308 TESTING <\/td>\n<\/tr>\n
150<\/td>\nCHAPTER 14 SOLAR THERMAL SYSTEMS
SECTION 1401 GENERAL
SECTION 1402 DESIGN AND INSTALLATION <\/td>\n<\/tr>\n
152<\/td>\nSECTION 1403 HEAT TRANSFER FLUIDS
SECTION 1404 LABELING <\/td>\n<\/tr>\n
154<\/td>\nCHAPTER 15 REFERENCED STANDARDS
ACCA
AHRI
AMCA
ANSI <\/td>\n<\/tr>\n
155<\/td>\nASHRAE
ASME <\/td>\n<\/tr>\n
156<\/td>\nASSE
ASSP
ASTM <\/td>\n<\/tr>\n
160<\/td>\nAWS
AWWA <\/td>\n<\/tr>\n
161<\/td>\nCPSC
CSA
DOL <\/td>\n<\/tr>\n
162<\/td>\nFDA
FS
ICC <\/td>\n<\/tr>\n
163<\/td>\nIIAR
MSS
NAIMA
NBBI
NFPA <\/td>\n<\/tr>\n
164<\/td>\nNSF
SMACNA <\/td>\n<\/tr>\n
165<\/td>\nUL <\/td>\n<\/tr>\n
170<\/td>\nAPPENDIX A CHIMNEY CONNECTOR PASS-THROUGHS
SECTION A101 CHIMNEY CONNECTOR SYSTEMS
FIGURE A101.1(1) CHIMNEY CONNECTOR SYSTEMS <\/td>\n<\/tr>\n
171<\/td>\nFIGURE A101.1(2) CHIMNEY CONNECTOR SYSTEMS <\/td>\n<\/tr>\n
172<\/td>\nAPPENDIX B RECOMMENDED PERMIT FEE SCHEDULE
SECTION B101 MECHANICAL WORK, OTHER THAN GAS PIPING SYSTEMS
SECTION B102 FEE FOR REINSPECTION
SECTION B103 TEMPORARY OPERATION INSPECTION FEE
SECTION B104 SELF-CONTAINED UNITS LESS THAN 2 TONS <\/td>\n<\/tr>\n
174<\/td>\n[A] APPENDIX C BOARD OF APPEALS
[A] SECTION C101 GENERAL <\/td>\n<\/tr>\n
176<\/td>\nINDEX <\/td>\n<\/tr>\n
182<\/td>\nEDITORIAL CHANGES <\/td>\n<\/tr>\n
184<\/td>\nVALUABLE GUIDES TO CHANGES IN THE 2021 I-CODES\u00ae <\/td>\n<\/tr>\n
185<\/td>\nICC LEARNING CENTER <\/td>\n<\/tr>\n
186<\/td>\nICC EVALUATION SERVICE <\/td>\n<\/tr>\n
187<\/td>\nTELEWORK WITH ICC DIGITAL CODES PREMIUM <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

International Mechanical Code, 3rd Printing<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
ICC<\/b><\/a><\/td>\n2021<\/td>\n187<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":465606,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[2670],"product_tag":[],"class_list":{"0":"post-465598","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-icc","8":"first","9":"instock","10":"sold-individually","11":"shipping-taxable","12":"purchasable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/465598","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/465606"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=465598"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=465598"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=465598"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}