{"id":82200,"date":"2024-10-18T03:02:27","date_gmt":"2024-10-18T03:02:27","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/ieee-802-16-2012\/"},"modified":"2024-10-24T19:49:25","modified_gmt":"2024-10-24T19:49:25","slug":"ieee-802-16-2012","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/ieee\/ieee-802-16-2012\/","title":{"rendered":"IEEE 802.16 2012"},"content":{"rendered":"

Revision Standard – Active. This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile point-to-multipoint broadband wireless access (BWA) systems providing multiple services. The MAC is structured to support the WirelessMAN-SC, WirelessMAN-OFDM, and WirelessMAN-OFDMA PHY specifications, each suited to a particular operational environment. The standard enables rapid worldwide deployment of innovative, cost-effective, and interoperable multivendor broadband wireless access products, facilitates competition in broadband access by providing alternatives to wireline broadband access, encourages consistent worldwide spectrum allocation, and accelerates the commercialization of broadband wireless access systems.<\/p>\n

PDF Catalog<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
PDF Pages<\/th>\nPDF Title<\/th>\n<\/tr>\n
1<\/td>\nCover
\n <\/td>\n<\/tr>\n
3<\/td>\nTitle page
\n <\/td>\n<\/tr>\n
6<\/td>\nNotice to users
Laws and regulations
Copyrights
Updating of IEEE documents
Errata
Patents <\/td>\n<\/tr>\n
7<\/td>\nParticipants <\/td>\n<\/tr>\n
10<\/td>\nHistorical information regarding IEEE Std 802.16 <\/td>\n<\/tr>\n
29<\/td>\nIntroduction
Conformance test methodology <\/td>\n<\/tr>\n
30<\/td>\nContents <\/td>\n<\/tr>\n
75<\/td>\nFigures <\/td>\n<\/tr>\n
87<\/td>\nTables <\/td>\n<\/tr>\n
103<\/td>\nImportant notice
\n
1. Overview
1.1 Scope
1.2 Purpose
1.3 Variants and frequency bands <\/td>\n<\/tr>\n
104<\/td>\n1.3.1 10\u201366 GHz licensed bands
1.3.2 Frequencies below 11 GHz
1.3.3 License-exempt bands
1.3.4 Air interface nomenclature and compliance <\/td>\n<\/tr>\n
105<\/td>\n1.4 Reference models <\/td>\n<\/tr>\n
107<\/td>\n1.4.1 Management reference model
1.4.2 Handover (HO) process
1.4.3 IEEE 802.16 entity <\/td>\n<\/tr>\n
108<\/td>\n1.4.4 Network reference model
1.4.4.1 SS\/MS and BS Interface
1.4.4.2 IEEE 802.16 entity to NCMS Interface <\/td>\n<\/tr>\n
109<\/td>\n1.4.5 Management SAP (M-SAP)
1.4.6 Control SAP (C-SAP)
1.5 Managed objects
1.6 Multihop relay <\/td>\n<\/tr>\n
111<\/td>\n2. Normative references <\/td>\n<\/tr>\n
115<\/td>\n3. Definitions <\/td>\n<\/tr>\n
129<\/td>\n4. Abbreviations and acronyms <\/td>\n<\/tr>\n
137<\/td>\n5. Service-specific CS
5.1 ATM CS
5.1.1 CS service definition
5.1.2 Data\/Control plane
5.1.2.1 PDU formats <\/td>\n<\/tr>\n
138<\/td>\n5.1.2.2 Classification
5.1.2.2.1 VP-switched mode
5.1.2.2.2 VC-switched mode <\/td>\n<\/tr>\n
139<\/td>\n5.1.2.3 PHS
5.1.2.3.1 PHS for VP-switched ATM connections
5.1.2.3.2 PHS for VC-switched ATM connections <\/td>\n<\/tr>\n
140<\/td>\n5.1.2.4 Signaling procedure <\/td>\n<\/tr>\n
141<\/td>\n5.2 Packet CS
5.2.1 MAC SDU format
5.2.2 Classification <\/td>\n<\/tr>\n
143<\/td>\n5.2.3 Payload header suppression (PHS) <\/td>\n<\/tr>\n
144<\/td>\n5.2.3.1 PHS operation <\/td>\n<\/tr>\n
146<\/td>\n5.2.3.2 PHS signaling <\/td>\n<\/tr>\n
147<\/td>\n5.2.4 IEEE 802.3\/Ethernet-specific part
5.2.4.1 IEEE 802.3\/Ethernet CS PDU format
5.2.4.2 IEEE 802.3\/Ethernet CS classification rules <\/td>\n<\/tr>\n
148<\/td>\n5.2.5 IP specific part
5.2.5.1 IP CS PDU format <\/td>\n<\/tr>\n
149<\/td>\n5.2.5.2 IP classification rules
5.3 Generic Packet Convergence Sublayer (GPCS) <\/td>\n<\/tr>\n
150<\/td>\n5.3.1 Mapping of the GPCS service to upper layers <\/td>\n<\/tr>\n
151<\/td>\n5.3.2 Operation of GPCS with SSs that do not support the GPCS
5.3.3 GPCS SAP parameters
5.3.4 GPCS_DATA.request
5.3.4.1 Function
5.3.4.2 Semantics of the service primitive <\/td>\n<\/tr>\n
152<\/td>\n5.3.4.3 When generated
5.3.4.4 Effect of receipt
5.3.5 GPCS_DATA.indication
5.3.5.1 Function
5.3.5.2 Semantics of the service primitive
5.3.5.3 When generated
5.3.5.4 Effect of receipt <\/td>\n<\/tr>\n
153<\/td>\n5.3.6 PHS operation <\/td>\n<\/tr>\n
155<\/td>\n6. MAC common part sublayer
6.1 Point-to-multipoint (PMP) operation overview <\/td>\n<\/tr>\n
156<\/td>\n6.2 Reserved
6.3 Data\/Control plane
6.3.1 Addressing and connections
6.3.1.1 Point-to-multipoint (PMP) <\/td>\n<\/tr>\n
157<\/td>\n6.3.1.2 Multihop relay
6.3.1.2.1 Addressing scheme for relaying <\/td>\n<\/tr>\n
158<\/td>\n6.3.2 MAC PDU formats
6.3.2.1 MAC header formats <\/td>\n<\/tr>\n
160<\/td>\n6.3.2.1.1 Generic MAC header <\/td>\n<\/tr>\n
162<\/td>\n6.3.2.1.1.1 Relay MAC header format <\/td>\n<\/tr>\n
164<\/td>\n6.3.2.1.2 MAC header without payload
6.3.2.1.2.1 MAC signaling header type I <\/td>\n<\/tr>\n
172<\/td>\n6.3.2.1.2.2 MAC signaling header type II <\/td>\n<\/tr>\n
191<\/td>\n6.3.2.2 MAC subheaders and special payloads
6.3.2.2.1 Fragmentation subheader (FSH) <\/td>\n<\/tr>\n
192<\/td>\n6.3.2.2.2 Grant management subheader (GMSH) <\/td>\n<\/tr>\n
193<\/td>\n6.3.2.2.3 Packing subheader (PSH) <\/td>\n<\/tr>\n
194<\/td>\n6.3.2.2.4 ARQ feedback
6.3.2.2.5 Reserved
6.3.2.2.6 Fast-feedback allocation subheader (FFSH) <\/td>\n<\/tr>\n
195<\/td>\n6.3.2.2.7 Extended subheader format <\/td>\n<\/tr>\n
197<\/td>\n6.3.2.2.7.1 SDU SN extended subheader
6.3.2.2.7.2 DL sleep control extended subheader <\/td>\n<\/tr>\n
198<\/td>\n6.3.2.2.7.3 Feedback request extended subheader
6.3.2.2.7.4 MIMO mode feedback extended subheader <\/td>\n<\/tr>\n
199<\/td>\n6.3.2.2.7.5 UL Tx power report extended subheader
6.3.2.2.7.6 Mini-feedback extended subheader <\/td>\n<\/tr>\n
200<\/td>\n6.3.2.2.7.7 SN request extended subheader
6.3.2.2.7.8 PDU SN extended subheader
6.3.2.2.7.9 ertPS resumption bitmap extended subheader <\/td>\n<\/tr>\n
201<\/td>\n6.3.2.2.7.10 Persistent Allocation Error Event
6.3.2.2.8 Relay MAC PDU subheaders
6.3.2.2.8.1 QoS subheader (QSH)
6.3.2.2.8.2 Allocation subheader <\/td>\n<\/tr>\n
202<\/td>\n6.3.2.2.8.3 Fragmentation subheader (FSH) <\/td>\n<\/tr>\n
203<\/td>\n6.3.2.2.8.4 Packing subheader (PSH)
6.3.2.3 MAC management messages <\/td>\n<\/tr>\n
208<\/td>\n6.3.2.3.1 DCD (DL channel descriptor) message <\/td>\n<\/tr>\n
209<\/td>\n6.3.2.3.2 DL-MAP (Downlink map) message <\/td>\n<\/tr>\n
210<\/td>\n6.3.2.3.3 UCD (UL channel descriptor) message <\/td>\n<\/tr>\n
212<\/td>\n6.3.2.3.4 UL-MAP (UL map) message <\/td>\n<\/tr>\n
213<\/td>\n6.3.2.3.5 RNG-REQ (ranging request) message <\/td>\n<\/tr>\n
217<\/td>\n6.3.2.3.6 RNG-RSP (ranging response) message <\/td>\n<\/tr>\n
222<\/td>\n6.3.2.3.7 REG-REQ (registration request) message <\/td>\n<\/tr>\n
223<\/td>\n6.3.2.3.8 REG-RSP (registration response) message <\/td>\n<\/tr>\n
226<\/td>\n6.3.2.3.9 Privacy key management (PKM) messages (PKM-REQ\/PKM-RSP) <\/td>\n<\/tr>\n
229<\/td>\n6.3.2.3.9.1 SA Add message <\/td>\n<\/tr>\n
230<\/td>\n6.3.2.3.9.2 Auth Request (authorization request) message
6.3.2.3.9.3 Auth Reply (authorization reply) message <\/td>\n<\/tr>\n
231<\/td>\n6.3.2.3.9.4 Auth Reject (authorization reject) message
6.3.2.3.9.5 Key Request message <\/td>\n<\/tr>\n
232<\/td>\n6.3.2.3.9.6 Key Reply message
6.3.2.3.9.7 Key Reject message <\/td>\n<\/tr>\n
233<\/td>\n6.3.2.3.9.8 Authorization Invalid message
6.3.2.3.9.9 TEK Invalid message <\/td>\n<\/tr>\n
234<\/td>\n6.3.2.3.9.10 Auth Info (authentication information) message
6.3.2.3.9.11 PKMv2 RSA-Request message <\/td>\n<\/tr>\n
235<\/td>\n6.3.2.3.9.12 PKMv2 RSA-Reply message <\/td>\n<\/tr>\n
236<\/td>\n6.3.2.3.9.13 PKMv2 RSA-Reject message
6.3.2.3.9.14 PKMv2 RSA-Acknowledgment message <\/td>\n<\/tr>\n
237<\/td>\n6.3.2.3.9.15 PKMv2 EAP-Start message
6.3.2.3.9.16 PKMv2 EAP-Transfer message <\/td>\n<\/tr>\n
238<\/td>\n6.3.2.3.9.17 PKMv2 SA-TEK-Challenge message
6.3.2.3.9.18 PKMv2 SA-TEK-Request message <\/td>\n<\/tr>\n
239<\/td>\n6.3.2.3.9.19 PKMv2 SA-TEK-Response message <\/td>\n<\/tr>\n
240<\/td>\n6.3.2.3.9.20 PKMv2 Key-Request message
6.3.2.3.9.21 PKMv2 Key-Reply message <\/td>\n<\/tr>\n
241<\/td>\n6.3.2.3.9.22 PKMv2 Key-Reject message <\/td>\n<\/tr>\n
242<\/td>\n6.3.2.3.9.23 PKMv2 SA-Addition message
6.3.2.3.9.24 PKMv2 TEK-Invalid message <\/td>\n<\/tr>\n
243<\/td>\n6.3.2.3.9.25 PKMv2 Group-Key-Update-Command message <\/td>\n<\/tr>\n
244<\/td>\n6.3.2.3.9.26 MIH Initial Request message
6.3.2.3.9.27 MIH Acknowledge <\/td>\n<\/tr>\n
245<\/td>\n6.3.2.3.9.28 MIH Comeback Response
6.3.2.3.9.29 PKMv2 AK transfer message <\/td>\n<\/tr>\n
246<\/td>\n6.3.2.3.9.30 PKMv2 AK transfer ACK
6.3.2.3.10 DSA-REQ message <\/td>\n<\/tr>\n
248<\/td>\n6.3.2.3.10.1 SS-Initiated DSA
6.3.2.3.10.2 BS-Initiated DSA <\/td>\n<\/tr>\n
249<\/td>\n6.3.2.3.11 DSA-RSP message <\/td>\n<\/tr>\n
250<\/td>\n6.3.2.3.11.1 SS-Initiated DSA
6.3.2.3.11.2 BS-Initiated DSA <\/td>\n<\/tr>\n
251<\/td>\n6.3.2.3.12 DSA-ACK message <\/td>\n<\/tr>\n
252<\/td>\n6.3.2.3.13 DSC-REQ (DSC request) message <\/td>\n<\/tr>\n
253<\/td>\n6.3.2.3.14 DSC-RSP (DSC response) message <\/td>\n<\/tr>\n
255<\/td>\n6.3.2.3.15 DSC-ACK (DSC acknowledge) message <\/td>\n<\/tr>\n
256<\/td>\n6.3.2.3.16 DSD-REQ message <\/td>\n<\/tr>\n
258<\/td>\n6.3.2.3.17 DSD-RSP message <\/td>\n<\/tr>\n
259<\/td>\n6.3.2.3.18 MCA-REQ (multicast polling assignment request) message
6.3.2.3.19 MCA-RSP (multicast polling assignment response) message <\/td>\n<\/tr>\n
260<\/td>\n6.3.2.3.20 DBPC-REQ (DL burst profile change request) message
6.3.2.3.21 DBPC-RSP (DL burst profile change response) message <\/td>\n<\/tr>\n
261<\/td>\n6.3.2.3.22 RES-CMD (reset command) message <\/td>\n<\/tr>\n
262<\/td>\n6.3.2.3.23 SBC-REQ (SS and RS basic capability request) message <\/td>\n<\/tr>\n
263<\/td>\n6.3.2.3.23.1 HARQ support <\/td>\n<\/tr>\n
264<\/td>\n6.3.2.3.24 SBC-RSP (SS and RS basic capability response) message <\/td>\n<\/tr>\n
266<\/td>\n6.3.2.3.25 CLK-CMP (clock comparison) message <\/td>\n<\/tr>\n
267<\/td>\n6.3.2.3.26 DREG-CMD (de\/reregister command) message <\/td>\n<\/tr>\n
269<\/td>\n6.3.2.3.27 DSX-RVD (DSx received) message <\/td>\n<\/tr>\n
270<\/td>\n6.3.2.3.28 TFTP-CPLT (Config File TFTP complete) message
6.3.2.3.29 TFTP-RSP (Config File TFTP complete response) message <\/td>\n<\/tr>\n
271<\/td>\n6.3.2.3.30 ARQ-Feedback message
6.3.2.3.31 ARQ-Discard message <\/td>\n<\/tr>\n
272<\/td>\n6.3.2.3.32 ARQ-Reset message
6.3.2.3.33 Channel Measurement REP-REQ\/RSP (report request\/response) <\/td>\n<\/tr>\n
274<\/td>\n6.3.2.3.34 FPC (fast power control) message
6.3.2.3.35 AAS-FBCK-REQ\/RSP (AAS channel feedback request\/response) messages <\/td>\n<\/tr>\n
275<\/td>\n6.3.2.3.36 AAS_Beam_Select message <\/td>\n<\/tr>\n
276<\/td>\n6.3.2.3.37 DREG-REQ (SS deregistration request) message <\/td>\n<\/tr>\n
277<\/td>\n6.3.2.3.38 HARQ MAP message
6.3.2.3.38.1 HARQ MAP message format <\/td>\n<\/tr>\n
280<\/td>\n6.3.2.3.38.2 Format Configuration IE <\/td>\n<\/tr>\n
282<\/td>\n6.3.2.3.38.3 Reduced CID <\/td>\n<\/tr>\n
283<\/td>\n6.3.2.3.38.4 HARQ Control IE <\/td>\n<\/tr>\n
284<\/td>\n6.3.2.3.38.5 CQICH Control IE <\/td>\n<\/tr>\n
286<\/td>\n6.3.2.3.38.6 Compact DL-MAP IE <\/td>\n<\/tr>\n
302<\/td>\n6.3.2.3.38.7 Compact UL-MAP IE <\/td>\n<\/tr>\n
313<\/td>\n6.3.2.3.39 MOB_SLP-REQ (sleep request) message <\/td>\n<\/tr>\n
316<\/td>\n6.3.2.3.40 MOB_SLP-RSP (sleep response) message <\/td>\n<\/tr>\n
321<\/td>\n6.3.2.3.41 MOB_TRF-IND (traffic indication) message <\/td>\n<\/tr>\n
323<\/td>\n6.3.2.3.42 MOB_NBR-ADV (neighbor advertisement) message <\/td>\n<\/tr>\n
330<\/td>\n6.3.2.3.43 MOB_SCN-REQ (scanning interval allocation request) message <\/td>\n<\/tr>\n
334<\/td>\n6.3.2.3.44 MOB_SCN-RSP (scanning interval allocation response) message <\/td>\n<\/tr>\n
341<\/td>\n6.3.2.3.45 MOB_SCN-REP (scanning result report) message <\/td>\n<\/tr>\n
347<\/td>\n6.3.2.3.46 MOB_ASC-REP (association result report) message <\/td>\n<\/tr>\n
349<\/td>\n6.3.2.3.47 MOB_BSHO-REQ (BS HO request) message <\/td>\n<\/tr>\n
360<\/td>\n6.3.2.3.48 MOB_MSHO-REQ (MS HO request) message <\/td>\n<\/tr>\n
364<\/td>\n6.3.2.3.49 MOB_BSHO-RSP (BS HO response) message <\/td>\n<\/tr>\n
375<\/td>\n6.3.2.3.50 MOB_HO-IND (HO indication) message <\/td>\n<\/tr>\n
378<\/td>\n6.3.2.3.51 MOB_PAG-ADV (BS broadcast paging) message <\/td>\n<\/tr>\n
380<\/td>\n6.3.2.3.52 MBS_MAP (multicast and broadcast service map) message <\/td>\n<\/tr>\n
387<\/td>\n6.3.2.3.53 PMC_REQ (power control mode change request) message <\/td>\n<\/tr>\n
388<\/td>\n6.3.2.3.54 PMC_RSP (power control mode change response) message <\/td>\n<\/tr>\n
389<\/td>\n6.3.2.3.55 OFDMA SUB-DL-UL-MAP message <\/td>\n<\/tr>\n
392<\/td>\n6.3.2.3.56 MIMO precoding setup\/tear-down messages <\/td>\n<\/tr>\n
393<\/td>\n6.3.2.3.57 MIH Payload Transfer (MOB_MIH-MSG) message
6.3.2.3.58 Service Identity Information (SII-ADV) message <\/td>\n<\/tr>\n
394<\/td>\n6.3.2.3.59 Location Based Services (LBS-ADV) message <\/td>\n<\/tr>\n
396<\/td>\n6.3.2.3.60 R-link channel descriptor (RCD) message <\/td>\n<\/tr>\n
397<\/td>\n6.3.2.3.61 MR_NBR-INFO message <\/td>\n<\/tr>\n
401<\/td>\n6.3.2.3.62 MR_Ranging-REP message <\/td>\n<\/tr>\n
403<\/td>\n6.3.2.3.63 RS configuration command (RS_Config-CMD) message <\/td>\n<\/tr>\n
406<\/td>\n6.3.2.3.64 RS neighbor station measurement report (RS_NBR_MEAS-REP) message <\/td>\n<\/tr>\n
407<\/td>\n6.3.2.3.65 Location information request and response messages
6.3.2.3.65.1 MR location information request (MR_LOC-REQ) message <\/td>\n<\/tr>\n
408<\/td>\n6.3.2.3.65.2 MR_LOC-RSP message
6.3.2.3.66 MS scanning inform (MS_SCN-INF) message <\/td>\n<\/tr>\n
409<\/td>\n6.3.2.3.67 MS scanning completion (MS_SCN-CLT) message <\/td>\n<\/tr>\n
410<\/td>\n6.3.2.3.68 MS context information delete (MS_INFO-DEL) message <\/td>\n<\/tr>\n
411<\/td>\n6.3.2.3.69 RS clock synchronization (CLK-SYNC) message
6.3.2.3.70 MR association request (MR_ASC-REQ) message <\/td>\n<\/tr>\n
412<\/td>\n6.3.2.3.71 MR association response (MR_ASC-RSP) message <\/td>\n<\/tr>\n
413<\/td>\n6.3.2.3.72 RS_MOB_MEAS-REQ message <\/td>\n<\/tr>\n
414<\/td>\n6.3.2.3.73 HARQ error report messages for multihop relay <\/td>\n<\/tr>\n
415<\/td>\n6.3.2.3.74 MS sleep mode information message (MR_SLP-INFO) <\/td>\n<\/tr>\n
418<\/td>\n6.3.2.3.75 RS access station selection request (RS_AccessRS-REQ) message <\/td>\n<\/tr>\n
419<\/td>\n6.3.2.3.76 RS Scheduling (RS-SCH) message
6.3.2.3.77 RS_Member_List_Update message <\/td>\n<\/tr>\n
422<\/td>\n6.3.2.3.78 MR piggybacked bandwidth request information (MR_PBBR-INFO) message
6.3.2.3.79 MR generic acknowledgment (MR_Generic-ACK) message <\/td>\n<\/tr>\n
423<\/td>\n6.3.2.3.80 RS access MAP (RS_Access-MAP) message <\/td>\n<\/tr>\n
430<\/td>\n6.3.2.3.81 RS Relay MAP (RS_Relay-MAP) message <\/td>\n<\/tr>\n
432<\/td>\n6.3.2.3.82 MOB_INF-IND message <\/td>\n<\/tr>\n
433<\/td>\n6.3.2.3.83 MS_Context-REQ message <\/td>\n<\/tr>\n
434<\/td>\n6.3.2.3.84 MS_Context-RSP message <\/td>\n<\/tr>\n
435<\/td>\n6.3.2.3.85 MT_Transfer message <\/td>\n<\/tr>\n
436<\/td>\n6.3.2.3.86 CX-CCID-IND message <\/td>\n<\/tr>\n
438<\/td>\n6.3.2.3.87 CX-CCID-RES message <\/td>\n<\/tr>\n
440<\/td>\n6.3.2.3.88 Coexistence Forward Request message (CX-FWD-REQ) <\/td>\n<\/tr>\n
441<\/td>\n6.3.2.3.89 Coexistence Forward Response message (CX-FWD-RSP) <\/td>\n<\/tr>\n
442<\/td>\n6.3.2.3.90 Coexistence Forward Acknowledge Message (CX-FWD-ACK) <\/td>\n<\/tr>\n
443<\/td>\n6.3.2.3.91 Access Neighbor BS Request message (CX-ACCESS-NBS-REQ)
6.3.2.3.92 Access Neighbor BS Response message (CX-ACCESS-NBS-RSP) <\/td>\n<\/tr>\n
444<\/td>\n6.3.2.3.93 Forward End Request message (CX-FWD-END-REQ) <\/td>\n<\/tr>\n
445<\/td>\n6.3.2.3.94 CSI Monitoring Configure message (CX-CSI-MNTR-CFG)
6.3.2.3.95 CSI monitoring report message (CX-CSI-MNTR-REP) <\/td>\n<\/tr>\n
446<\/td>\n6.3.2.3.96 Coexistence Downlink Map message (CX-DL-MAP) <\/td>\n<\/tr>\n
448<\/td>\n6.3.2.3.97 CX-UL-MAP (CX-UL-MAP) message <\/td>\n<\/tr>\n
451<\/td>\n6.3.2.3.98 MOB_NBR-INFO <\/td>\n<\/tr>\n
452<\/td>\n6.3.3 Construction and transmission of MAC PDUs
6.3.3.1 Conventions
6.3.3.2 Concatenation <\/td>\n<\/tr>\n
454<\/td>\n6.3.3.3 Fragmentation
6.3.3.3.1 Non-ARQ connections
6.3.3.3.2 ARQ-enabled connections
6.3.3.4 Packing <\/td>\n<\/tr>\n
455<\/td>\n6.3.3.4.1 Packing for non-ARQ connections
6.3.3.4.1.1 Packing fixed-length MAC SDUs
6.3.3.4.1.2 Packing variable-length MAC SDUs <\/td>\n<\/tr>\n
457<\/td>\n6.3.3.4.2 Packing for ARQ-enabled connections
6.3.3.4.3 Packing ARQ Feedback IEs <\/td>\n<\/tr>\n
458<\/td>\n6.3.3.5 CRC calculation
6.3.3.5.1 CRC32 calculation for SC and OFDM mode <\/td>\n<\/tr>\n
459<\/td>\n6.3.3.5.1.1 CRC32 test vectors for SC and OFDM mode
6.3.3.5.2 CRC32 calculation for OFDMA mode <\/td>\n<\/tr>\n
460<\/td>\n6.3.3.5.2.1 CRC32 test vectors for OFDMA mode
6.3.3.6 Encryption of MAC PDUs
6.3.3.7 Padding <\/td>\n<\/tr>\n
461<\/td>\n6.3.3.8 MR construction and transmission of MAC PDUs
6.3.3.8.1 Transmission using tunnels <\/td>\n<\/tr>\n
462<\/td>\n6.3.3.8.2 Transmission using station CID
6.3.3.8.3 Fragmentation and packing of relay MAC PDU <\/td>\n<\/tr>\n
464<\/td>\n6.3.4 ARQ mechanism
6.3.4.1 ARQ block usage <\/td>\n<\/tr>\n
465<\/td>\n6.3.4.2 ARQ Feedback IE format <\/td>\n<\/tr>\n
467<\/td>\n6.3.4.2.1 ARQ Feedback IE format with extended capability <\/td>\n<\/tr>\n
470<\/td>\n6.3.4.2.2 ARQ Feedback IE for Tunnel packet <\/td>\n<\/tr>\n
472<\/td>\n6.3.4.3 ARQ parameters
6.3.4.3.1 ARQ_BSN_MODULUS
6.3.4.3.2 ARQ_WINDOW_SIZE
6.3.4.3.3 ARQ_BLOCK_LIFETIME
6.3.4.3.4 ARQ_RETRY_TIMEOUT
6.3.4.3.5 ARQ_SYNC_LOSS_TIMEOUT
6.3.4.3.6 ARQ_RX_PURGE_TIMEOUT <\/td>\n<\/tr>\n
473<\/td>\n6.3.4.3.7 ARQ_BLOCK_SIZE
6.3.4.4 ARQ procedures
6.3.4.4.1 ARQ state machine variables
6.3.4.4.1.1 Transmitter variables
6.3.4.4.1.2 Receiver variables
6.3.4.5 ARQ-enabled connection setup and negotiation
6.3.4.6 ARQ operation
6.3.4.6.1 Sequence number comparison
6.3.4.6.2 Transmitter state machine <\/td>\n<\/tr>\n
478<\/td>\n6.3.4.6.3 Receiver state machine <\/td>\n<\/tr>\n
480<\/td>\n6.3.4.6.4 ARQ modifications for relaying
6.3.4.6.4.1 Two-link ARQ mode <\/td>\n<\/tr>\n
481<\/td>\n6.3.4.6.4.2 Hop-by-hop ARQ mode
6.3.4.6.4.3 ARQ State machine <\/td>\n<\/tr>\n
482<\/td>\n6.3.5 Scheduling services <\/td>\n<\/tr>\n
484<\/td>\n6.3.5.1 Outbound transmission scheduling <\/td>\n<\/tr>\n
485<\/td>\n6.3.5.2 UL request\/grant scheduling
6.3.5.2.1 Unsolicited grant service (UGS) <\/td>\n<\/tr>\n
486<\/td>\n6.3.5.2.2 Real-time polling service (rtPS)
6.3.5.2.2.1 Extended rtPS <\/td>\n<\/tr>\n
487<\/td>\n6.3.5.2.3 Non-real-time polling service (nrtPS)
6.3.5.2.4 Best effort (BE) service
6.3.6 Bandwidth allocation and request mechanisms <\/td>\n<\/tr>\n
488<\/td>\n6.3.6.1 Requests
6.3.6.1.1 Bandwidth request handling in relay networks with distributed scheduling <\/td>\n<\/tr>\n
489<\/td>\n6.3.6.1.2 Bandwidth request handling in relay networks with centralized scheduling <\/td>\n<\/tr>\n
490<\/td>\n6.3.6.2 Grants
6.3.6.2.1 Bandwidth grant handling in relay networks with distributed scheduling <\/td>\n<\/tr>\n
491<\/td>\n6.3.6.2.2 Bandwidth grant handling in relay networks with centralized scheduling
6.3.6.3 Polling
6.3.6.3.1 Unicast polling <\/td>\n<\/tr>\n
493<\/td>\n6.3.6.3.2 Multicast and broadcast polling <\/td>\n<\/tr>\n
494<\/td>\n6.3.6.3.3 PM bit <\/td>\n<\/tr>\n
495<\/td>\n6.3.6.3.4 Polling handling in relay network <\/td>\n<\/tr>\n
496<\/td>\n6.3.6.4 Contention-based focused BRs for WirelessMAN-OFDM
6.3.6.5 Contention-based CDMA BRs for WirelessMAN-OFDMA <\/td>\n<\/tr>\n
497<\/td>\n6.3.6.5.1 Contention-based CDMA BR handling in relay networks with centralized scheduling <\/td>\n<\/tr>\n
498<\/td>\n6.3.6.5.2 Contention-based CDMA bandwidth requests using soft combining
6.3.6.6 CDMA BRs in relay networks <\/td>\n<\/tr>\n
499<\/td>\n6.3.6.6.1 Unique RS CDMA code allocation
6.3.6.7 Dedicated relay uplink channel allocation <\/td>\n<\/tr>\n
500<\/td>\n6.3.6.8 Downlink flow control for relay networks with distributed scheduling <\/td>\n<\/tr>\n
503<\/td>\n6.3.7 MAC support of PHY
6.3.7.1 Frequency division duplexing (FDD) <\/td>\n<\/tr>\n
504<\/td>\n6.3.7.2 Time division duplexing (TDD) <\/td>\n<\/tr>\n
505<\/td>\n6.3.7.3 DL-MAP message
6.3.7.4 UL-MAP message
6.3.7.4.1 UL timing
6.3.7.4.2 UL allocations
6.3.7.4.3 UL interval definition
6.3.7.4.3.1 Request IE
6.3.7.4.3.2 Initial Ranging IE <\/td>\n<\/tr>\n
506<\/td>\n6.3.7.4.3.3 Data Grant Burst Type IEs
6.3.7.4.3.4 End Of Map IE
6.3.7.4.3.5 Gap IE
6.3.7.5 Map relevance and synchronization <\/td>\n<\/tr>\n
508<\/td>\n6.3.7.5.1 WirelessMAN-SC PHY
6.3.7.5.2 WirelessMAN-OFDM PHY
6.3.7.5.3 WirelessMAN-OFDMA PHY <\/td>\n<\/tr>\n
509<\/td>\n6.3.7.6 Optional MAC AAS support of OFDM and OFDMA
6.3.7.6.1 AAS MAC services <\/td>\n<\/tr>\n
510<\/td>\n6.3.7.6.2 MAC control functions
6.3.7.6.3 AAS DL synchronization
6.3.7.6.4 Alerting the BS about presence of a new SS in an AAS system <\/td>\n<\/tr>\n
511<\/td>\n6.3.7.6.5 FDD\/TDD support
6.3.7.6.6 Requesting bandwidth
6.3.7.7 R-MAP
6.3.8 Contention resolution <\/td>\n<\/tr>\n
512<\/td>\n6.3.8.1 Transmission opportunities <\/td>\n<\/tr>\n
513<\/td>\n6.3.9 Network entry and initialization <\/td>\n<\/tr>\n
516<\/td>\n6.3.9.1 Scanning and synchronization to the DL
6.3.9.1.1 MR-BS and RS behavior during scanning and synchronization to the DL
6.3.9.2 Obtain DL parameters <\/td>\n<\/tr>\n
518<\/td>\n6.3.9.2.1 First stage access station selection
6.3.9.3 Obtain UL parameters <\/td>\n<\/tr>\n
520<\/td>\n6.3.9.4 Message flows during scanning and UL parameter acquisition <\/td>\n<\/tr>\n
521<\/td>\n6.3.9.5 Initial ranging and automatic adjustments <\/td>\n<\/tr>\n
522<\/td>\n6.3.9.5.1 Contention-based initial ranging and automatic adjustments <\/td>\n<\/tr>\n
525<\/td>\n6.3.9.6 Ranging parameter adjustment <\/td>\n<\/tr>\n
530<\/td>\n6.3.9.7 Negotiate basic capabilities <\/td>\n<\/tr>\n
533<\/td>\n6.3.9.8 SS authorization and key exchange
6.3.9.9 Registration <\/td>\n<\/tr>\n
538<\/td>\n6.3.9.9.1 IP version negotiation <\/td>\n<\/tr>\n
539<\/td>\n6.3.9.9.2 MR-BS and RS behavior during registration <\/td>\n<\/tr>\n
541<\/td>\n6.3.9.10 Establishing IP connectivity <\/td>\n<\/tr>\n
542<\/td>\n6.3.9.11 Establishing time of day
6.3.9.12 Transferring operational parameters <\/td>\n<\/tr>\n
544<\/td>\n6.3.9.13 Establishing provisioned connections
6.3.9.14 Forcing MSs to perform network entry at once <\/td>\n<\/tr>\n
545<\/td>\n6.3.9.15 RS neighbor station measurement report <\/td>\n<\/tr>\n
546<\/td>\n6.3.9.16 Second stage access station selection <\/td>\n<\/tr>\n
547<\/td>\n6.3.9.17 Path creation and tunnel establishment
6.3.9.18 RS operation parameters configuration
6.3.9.18.1 Parameter configuration <\/td>\n<\/tr>\n
550<\/td>\n6.3.9.18.2 Management CID allocation
6.3.9.19 Network entry state machine for the MR system <\/td>\n<\/tr>\n
553<\/td>\n6.3.10 Ranging
6.3.10.1 DL burst profile management <\/td>\n<\/tr>\n
556<\/td>\n6.3.10.2 UL periodic ranging <\/td>\n<\/tr>\n
558<\/td>\n6.3.10.3 OFDMA-based ranging <\/td>\n<\/tr>\n
559<\/td>\n6.3.10.3.1 Contention-based initial ranging and automatic adjustments <\/td>\n<\/tr>\n
566<\/td>\n6.3.10.3.1.1 MR-BS and RS behavior during contention-based initial ranging <\/td>\n<\/tr>\n
580<\/td>\n6.3.10.3.1.2 OFDMA\u2014initial ranging with soft combining <\/td>\n<\/tr>\n
581<\/td>\n6.3.10.3.2 Periodic ranging and automatic adjustments <\/td>\n<\/tr>\n
585<\/td>\n6.3.10.3.2.1 MR-BS and RS behavior during periodic ranging <\/td>\n<\/tr>\n
590<\/td>\n6.3.10.4 CDMA HO ranging and automatic adjustment
6.3.10.4.1 Dedicated ranging and automatic adjustments <\/td>\n<\/tr>\n
591<\/td>\n6.3.10.4.2 MR-BS and RS behavior during handover ranging
6.3.10.4.3 OFDMA HO ranging with soft combining <\/td>\n<\/tr>\n
593<\/td>\n6.3.10.4.4 OFDMA HO ranging for soft combining without fragmentation of RNG-REQ message <\/td>\n<\/tr>\n
594<\/td>\n6.3.11 Update of channel descriptors <\/td>\n<\/tr>\n
596<\/td>\n6.3.12 Assigning SSs to multicast groups <\/td>\n<\/tr>\n
599<\/td>\n6.3.13 Establishment of multicast connections
6.3.14 Quality of service (QoS)
6.3.14.1 Theory of operation <\/td>\n<\/tr>\n
600<\/td>\n6.3.14.2 Service flows <\/td>\n<\/tr>\n
602<\/td>\n6.3.14.3 Object model <\/td>\n<\/tr>\n
603<\/td>\n6.3.14.4 Service classes <\/td>\n<\/tr>\n
604<\/td>\n6.3.14.4.1 Global service classes <\/td>\n<\/tr>\n
609<\/td>\n6.3.14.5 Authorization
6.3.14.6 Types of service flows
6.3.14.6.1 Provisioned service flows <\/td>\n<\/tr>\n
610<\/td>\n6.3.14.6.2 Admitted service flows
6.3.14.6.3 Active service flows <\/td>\n<\/tr>\n
611<\/td>\n6.3.14.7 Service flow creation
6.3.14.7.1 Dynamic service flow creation
6.3.14.7.1.1 Dynamic service flow creation\u2014SS-initiated <\/td>\n<\/tr>\n
612<\/td>\n6.3.14.7.1.2 Dynamic service flow creation\u2014BS-initiated
6.3.14.8 Dynamic service flow modification and deletion <\/td>\n<\/tr>\n
613<\/td>\n6.3.14.9 Service flow management
6.3.14.9.1 Overview
6.3.14.9.2 Dynamic service flow state transitions <\/td>\n<\/tr>\n
622<\/td>\n6.3.14.9.3 Dynamic service addition (DSA)
6.3.14.9.3.1 SS-initiated DSA <\/td>\n<\/tr>\n
624<\/td>\n6.3.14.9.3.2 BS-initiated DSA <\/td>\n<\/tr>\n
626<\/td>\n6.3.14.9.3.3 DSA state transition diagrams <\/td>\n<\/tr>\n
634<\/td>\n6.3.14.9.4 Dynamic service change (DSC) <\/td>\n<\/tr>\n
635<\/td>\n6.3.14.9.4.1 SS-initiated DSC <\/td>\n<\/tr>\n
637<\/td>\n6.3.14.9.4.2 BS-initiated DSC <\/td>\n<\/tr>\n
638<\/td>\n6.3.14.9.4.3 DSC state transition diagrams <\/td>\n<\/tr>\n
647<\/td>\n6.3.14.9.5 Connection release
6.3.14.9.5.1 SS-initiated DSD <\/td>\n<\/tr>\n
648<\/td>\n6.3.14.9.5.2 BS-initiated DSD <\/td>\n<\/tr>\n
649<\/td>\n6.3.14.9.5.3 DSD state transition diagrams <\/td>\n<\/tr>\n
653<\/td>\n6.3.14.10 QoS support for tunnel mode operation
6.3.14.10.1 Tunnel service flows
6.3.14.10.1.1 Centralized scheduling mode
6.3.14.10.1.2 Distributed scheduling mode <\/td>\n<\/tr>\n
654<\/td>\n6.3.14.10.2 QoS subheader (QSH)
6.3.15 MAC support for HARQ <\/td>\n<\/tr>\n
655<\/td>\n6.3.15.1 Subpacket generation <\/td>\n<\/tr>\n
656<\/td>\n6.3.15.2 DL\/UL ACK\/NAK signaling
6.3.15.3 HARQ parameter signaling <\/td>\n<\/tr>\n
657<\/td>\n6.3.15.4 DL HARQ in MR systems with RSs operating in centralized scheduling mode
6.3.15.4.1 Non-transparent RS <\/td>\n<\/tr>\n
658<\/td>\n6.3.15.4.1.1 HARQ Error Report for Early Retransmission
6.3.15.4.1.2 ACK\/NAK scheduling for HARQ retransmission burst <\/td>\n<\/tr>\n
660<\/td>\n6.3.15.4.2 Transparent RS
6.3.15.4.2.1 RS hop-by-hop HARQ
6.3.15.4.2.2 RS assisted HARQ <\/td>\n<\/tr>\n
661<\/td>\n6.3.15.4.3 DL HARQ for tunnels through RSs operating in centralized scheduling mode <\/td>\n<\/tr>\n
664<\/td>\n6.3.15.5 UL HARQ in MR systems with RSs operating in centralized scheduling mode
6.3.15.5.1 Non-transparent RS <\/td>\n<\/tr>\n
665<\/td>\n6.3.15.5.2 Transparent RS
6.3.15.5.3 UL HARQ for tunnels through RSs operating in centralized scheduling mode <\/td>\n<\/tr>\n
666<\/td>\n6.3.15.6 HARQ for multihop scheduling RSs
6.3.15.7 HARQ for an RS group
6.3.15.7.1 DL HARQ for a non-transparent RS group <\/td>\n<\/tr>\n
667<\/td>\n6.3.15.7.2 DL HARQ for a transparent RS group <\/td>\n<\/tr>\n
668<\/td>\n6.3.15.7.3 UL HARQ for a non-transparent RS group
6.3.15.7.4 UL HARQ for a transparent RS group in assisted mode <\/td>\n<\/tr>\n
669<\/td>\n6.3.15.7.4.1 Hop-by-hop operation
6.3.15.7.4.2 End-to-end operation
6.3.15.8 HARQ support on RS UL_DCH <\/td>\n<\/tr>\n
670<\/td>\n6.3.16 DL CINR report operation
6.3.16.1 DL CINR report with REP-RSP MAC message <\/td>\n<\/tr>\n
671<\/td>\n6.3.16.2 Periodic CINR report with fast-feedback (CQICH) channel <\/td>\n<\/tr>\n
673<\/td>\n6.3.16.2.1 Conditions of transition triggering
6.3.17 Optional band AMC operations using 6-bit CQICH encoding
6.3.17.1 Call flows for mode transitions between normal subchannel and band AMC <\/td>\n<\/tr>\n
674<\/td>\n6.3.17.2 Conditions of transition triggering
6.3.18 Data delivery services for mobile network
6.3.18.1 Types of data delivery services <\/td>\n<\/tr>\n
675<\/td>\n6.3.18.1.1 Unsolicited grant service (UGS)
6.3.18.1.2 Real-time variable-rate (RT-VR) service
6.3.18.1.2.1 Description of the service <\/td>\n<\/tr>\n
676<\/td>\n6.3.18.1.3 Non-real-time variable-rate (NRT-VR) service
6.3.18.1.3.1 Description of the service
6.3.18.1.4 Best effort (BE) service
6.3.18.1.5 Extended real-time variable-rate (ERT-VR) service <\/td>\n<\/tr>\n
677<\/td>\n6.3.19 Sleep mode for mobility-supporting MS
6.3.19.1 Introduction <\/td>\n<\/tr>\n
681<\/td>\n6.3.19.2 Power saving classes of type I <\/td>\n<\/tr>\n
682<\/td>\n6.3.19.3 Power saving classes of type II <\/td>\n<\/tr>\n
683<\/td>\n6.3.19.4 Power saving classes of type III <\/td>\n<\/tr>\n
684<\/td>\n6.3.19.5 Periodic ranging in sleep mode
6.3.19.5.1 Periodic ranging in sleep mode for PHYs (SC and OFDM) <\/td>\n<\/tr>\n
685<\/td>\n6.3.19.5.2 Periodic ranging in sleep mode for OFDMA PHY
6.3.19.6 MDHO\/FBSS diversity set maintenance in sleep mode
6.3.19.7 Keep-alive check in sleep mode
6.3.19.7.1 OFDMA message-based keep-alive check in sleep mode <\/td>\n<\/tr>\n
686<\/td>\n6.3.19.7.2 OFDMA keep alive check by UL data grants in sleep mode <\/td>\n<\/tr>\n
687<\/td>\n6.3.19.8 Sleep mode supporting co-located coexistence
6.3.19.9 MAP relevance for Sleep Mode <\/td>\n<\/tr>\n
688<\/td>\n6.3.19.10 MS sleep mode support in MR systems
6.3.19.10.1 Centralized scheduling mode
6.3.19.10.2 Distributed scheduling mode <\/td>\n<\/tr>\n
689<\/td>\n6.3.19.11 Activation and transition of MS states
6.3.20 MAC HO procedures
6.3.20.1 Network topology acquisition
6.3.20.1.1 Network topology advertisement <\/td>\n<\/tr>\n
690<\/td>\n6.3.20.1.1.1 MR-BSs and RSs behavior during network topology advertisement
6.3.20.1.2 MS scanning of neighbor BSs <\/td>\n<\/tr>\n
692<\/td>\n6.3.20.1.2.1 MR-BSs and RSs behavior during MS scanning of neighbor BSs <\/td>\n<\/tr>\n
693<\/td>\n6.3.20.1.3 Association procedure
6.3.20.1.3.1 Association level 0\u2014Scan\/Association without coordination
6.3.20.1.3.2 Association level 1\u2014Association with coordination <\/td>\n<\/tr>\n
695<\/td>\n6.3.20.1.3.3 Association level 2\u2014Network-assisted association reporting
6.3.20.1.3.4 MR-BS and RSs behavior during association procedure <\/td>\n<\/tr>\n
696<\/td>\n6.3.20.2 HO process <\/td>\n<\/tr>\n
699<\/td>\n6.3.20.2.1 Cell reselection
6.3.20.2.2 HO decision and initiation <\/td>\n<\/tr>\n
702<\/td>\n6.3.20.2.3 HO cancellation
6.3.20.2.4 Fast ranging <\/td>\n<\/tr>\n
704<\/td>\n6.3.20.2.5 Termination with the serving BS
6.3.20.2.6 Drops <\/td>\n<\/tr>\n
705<\/td>\n6.3.20.2.7 Network entry\/reentry <\/td>\n<\/tr>\n
707<\/td>\n6.3.20.2.8 MS-assisted coordination of DL transmission at target BS for HO <\/td>\n<\/tr>\n
708<\/td>\n6.3.20.2.8.1 Context management during optimized HO <\/td>\n<\/tr>\n
713<\/td>\n6.3.20.2.9 HO process <\/td>\n<\/tr>\n
716<\/td>\n6.3.20.2.10 HO optimization rules and scenarios <\/td>\n<\/tr>\n
718<\/td>\n6.3.20.2.11 Seamless HO <\/td>\n<\/tr>\n
720<\/td>\n6.3.20.2.12 MR-BSs and RSs behavior during HO process
6.3.20.2.12.1 MS handover among access stations
6.3.20.2.12.2 MS drops during handover
6.3.20.2.12.3 MS Context Transfer for HO optimization in MR <\/td>\n<\/tr>\n
723<\/td>\n6.3.20.2.12.4 MS HO Optimization in MR in distributed security mode <\/td>\n<\/tr>\n
724<\/td>\n6.3.20.3 Macro diversity handover (MDHO) and fast BS switching
6.3.20.3.1 MDHO decision and initiation <\/td>\n<\/tr>\n
725<\/td>\n6.3.20.3.2 FBSS decision and initiation <\/td>\n<\/tr>\n
726<\/td>\n6.3.20.3.3 Diversity set update for MDHO\/FBSS <\/td>\n<\/tr>\n
727<\/td>\n6.3.20.3.4 Anchor BS update for MDHO\/FBSS
6.3.20.3.4.1 HO MAC management message method
6.3.20.3.4.2 Fast anchor BS selection feedback mechanism <\/td>\n<\/tr>\n
729<\/td>\n6.3.20.3.5 MS-assisted coordination of DL transmission at new anchor BS <\/td>\n<\/tr>\n
730<\/td>\n6.3.20.4 Mobile relay station handover <\/td>\n<\/tr>\n
731<\/td>\n6.3.20.4.1 Mobile RS handover process without preamble change
6.3.20.4.1.1 HO decision and initiation
6.3.20.4.1.2 Network entry\/reentry <\/td>\n<\/tr>\n
732<\/td>\n6.3.20.4.2 MRS handover with preamble change (Inter MR-BS)
6.3.20.4.3 MRS handover with preamble index changes (Intra MR-BS) <\/td>\n<\/tr>\n
733<\/td>\n6.3.20.4.4 MRS drops during handover
6.3.21 Multicast and broadcast service (MBS) <\/td>\n<\/tr>\n
734<\/td>\n6.3.21.1 Establishment and maintenance of MBSs <\/td>\n<\/tr>\n
735<\/td>\n6.3.21.1.1 Inter-MBS Zone transition <\/td>\n<\/tr>\n
736<\/td>\n6.3.21.2 Performance enhancement with macro diversity
6.3.21.3 Power saving operation
6.3.21.4 Multicast and broadcast zone (MBS_Zone)
6.3.21.5 MBS in an MR network <\/td>\n<\/tr>\n
737<\/td>\n6.3.22 MS idle mode (optional) <\/td>\n<\/tr>\n
739<\/td>\n6.3.22.1 MS idle mode initiation <\/td>\n<\/tr>\n
741<\/td>\n6.3.22.2 Cell selection
6.3.22.3 MS Broadcast Paging message time synchronization
6.3.22.4 MS paging unavailable interval
6.3.22.5 MS paging listening interval <\/td>\n<\/tr>\n
742<\/td>\n6.3.22.5.1 MS paging listening interval in MR system
6.3.22.6 BS Broadcast Paging message <\/td>\n<\/tr>\n
743<\/td>\n6.3.22.6.1 RS Broadcast Paging message <\/td>\n<\/tr>\n
744<\/td>\n6.3.22.7 Paging availability mode termination
6.3.22.7.1 MS side <\/td>\n<\/tr>\n
745<\/td>\n6.3.22.7.2 BS side
6.3.22.8 Location update
6.3.22.8.1 Location update conditions <\/td>\n<\/tr>\n
746<\/td>\n6.3.22.8.1.1 Paging group update
6.3.22.8.1.2 Timer update
6.3.22.8.1.3 Power down update
6.3.22.8.1.4 MAC hash skip threshold update
6.3.22.8.1.5 MBS update
6.3.22.8.2 Location update process
6.3.22.8.2.1 Secure location update process <\/td>\n<\/tr>\n
747<\/td>\n6.3.22.8.2.2 Unsecure location update process
6.3.22.9 Network reentry from idle mode <\/td>\n<\/tr>\n
748<\/td>\n6.3.22.10 MRS paging group update <\/td>\n<\/tr>\n
749<\/td>\n6.3.23 MIHF support
6.3.24 Location Based Services
6.3.24.1 Time Difference of Arrival (TDOA) <\/td>\n<\/tr>\n
750<\/td>\n6.3.25 Persistent Scheduling
6.3.25.1 Persistent Region ID
6.3.25.1.1 Downlink operation
6.3.25.1.1.1 BS operation
6.3.25.1.1.2 MS operation <\/td>\n<\/tr>\n
751<\/td>\n6.3.25.1.2 Uplink operation
6.3.25.1.2.1 BS operation
6.3.25.1.2.2 MS operation
6.3.25.2 Resource shifting <\/td>\n<\/tr>\n
752<\/td>\n6.3.25.3 HARQ retransmission
6.3.25.4 Error handling procedures <\/td>\n<\/tr>\n
753<\/td>\n6.3.25.4.1 Maximum Number of Persistent Allocations
6.3.25.4.2 MAP ACK channel
6.3.25.4.3 MAP NACK channel
6.3.25.4.3.1 Downlink operation <\/td>\n<\/tr>\n
754<\/td>\n6.3.25.4.3.2 Uplink operation
6.3.25.4.4 Error Correction Information
6.3.25.4.5 Change indicator
6.3.25.4.6 Retransmission flag <\/td>\n<\/tr>\n
755<\/td>\n6.3.25.4.7 Error recovery
6.3.25.4.7.1 Downlink persistent allocation error recovery
6.3.25.4.7.2 Uplink persistent allocation error recovery <\/td>\n<\/tr>\n
756<\/td>\n6.3.26 Emergency Service and Public Alert
6.3.27 Relay path management and routing <\/td>\n<\/tr>\n
757<\/td>\n6.3.27.1 Embedded path management for relay <\/td>\n<\/tr>\n
758<\/td>\n6.3.27.2 Explicit path management for relay
6.3.27.2.1 Path establishment, removal and update
6.3.27.2.2 CID to path binding <\/td>\n<\/tr>\n
759<\/td>\n6.3.27.2.3 Temporary path establishment and CID to path binding during initial network entry
6.3.27.3 Relaying support for combined ranging and initial topology discovery
6.3.27.4 R-link monitoring and reporting procedure for relay path management <\/td>\n<\/tr>\n
760<\/td>\n6.3.27.4.1 Access-link monitoring and reporting procedure for MS path management
6.3.27.5 Path management for multicast services <\/td>\n<\/tr>\n
761<\/td>\n6.3.27.6 Neighbor path metric for relay
6.3.28 Relay station neighborhood discovery
6.3.28.1 Repeatable R-amble transmission and monitoring scheme
6.3.28.2 Preplanned R-amble transmission and monitoring scheme <\/td>\n<\/tr>\n
762<\/td>\n6.3.29 Interference measurement in MR systems
6.3.29.1 Interference prediction by RS neighborhood measurement
6.3.29.2 Optional interference detection and measurement by RS sounding <\/td>\n<\/tr>\n
763<\/td>\n6.3.30 RS broadcast message relaying <\/td>\n<\/tr>\n
765<\/td>\n6.3.31 RS de-registration
6.3.32 MR location information <\/td>\n<\/tr>\n
767<\/td>\n6.3.33 RS grouping <\/td>\n<\/tr>\n
769<\/td>\n6.3.33.1 MS movement among access stations that share the same BSID
6.3.33.1.1 Mode 1
6.3.33.1.2 Mode 2 <\/td>\n<\/tr>\n
770<\/td>\n6.4 Procedures for uncoordinated coexistence
6.4.1 Uncoordinated coexistence mechanisms
6.4.1.1 Overview <\/td>\n<\/tr>\n
771<\/td>\n6.4.1.2 Uncoordinated coexistence with specific spectrum users (SSUs)
6.4.1.2.1 Overview
6.4.1.2.2 Testing channels for other users (including specific spectrum users) <\/td>\n<\/tr>\n
772<\/td>\n6.4.1.2.3 Discontinuing operations after detecting specific spectrum users
6.4.1.2.4 Detecting specific spectrum users
6.4.1.2.5 Scheduling for channel testing
6.4.1.2.6 Requesting and reporting of measurements <\/td>\n<\/tr>\n
773<\/td>\n6.4.1.2.7 Selecting and advertising a new channel
6.4.1.3 Uncoordinated coexistence with non-specific spectrum users (non-SSUs)
6.4.1.3.1 Overview
6.4.1.3.2 Dynamic Channel Selection (DCS) <\/td>\n<\/tr>\n
777<\/td>\n6.4.1.3.3 Frame structure and frame allocation <\/td>\n<\/tr>\n
779<\/td>\n7. Security sublayer
7.1 Architecture <\/td>\n<\/tr>\n
780<\/td>\n7.1.1 Secure encapsulation of MAC PDUs
7.1.2 Key management protocol <\/td>\n<\/tr>\n
781<\/td>\n7.1.3 Authentication protocol
7.1.3.1 PKM RSA authentication
7.1.3.2 PKM EAP authentication <\/td>\n<\/tr>\n
782<\/td>\n7.1.4 Mapping of connections to SAs
7.1.5 Cryptographic suite
7.1.6 Centralized Security Control in Multihop Relay System
7.1.6.1 MS security control
7.1.6.2 RS security control
7.1.6.3 Protection of non-authenticated PKM messages <\/td>\n<\/tr>\n
783<\/td>\n7.1.7 Distributed security control in a multihop relay system
7.1.7.1 Protection of SS\u2019s management messages
7.1.7.2 Sharing HMAC\/CMAC in management tunnel <\/td>\n<\/tr>\n
784<\/td>\n7.1.8 Security zone management
7.2 PKM protocol
7.2.1 PKM version 1
7.2.1.1 Security associations (SAs) <\/td>\n<\/tr>\n
785<\/td>\n7.2.1.2 SS authorization and AK exchange overview
7.2.1.2.1 Authorization via RSA authentication protocol <\/td>\n<\/tr>\n
786<\/td>\n7.2.1.3 TEK exchange overview
7.2.1.3.1 TEK exchange overview for PMP topology <\/td>\n<\/tr>\n
787<\/td>\n7.2.1.4 Security capabilities selection
7.2.1.5 Authorization state machine <\/td>\n<\/tr>\n
789<\/td>\n7.2.1.5.1 States
7.2.1.5.2 Messages <\/td>\n<\/tr>\n
790<\/td>\n7.2.1.5.3 Events <\/td>\n<\/tr>\n
791<\/td>\n7.2.1.5.4 Parameters
7.2.1.5.5 Actions <\/td>\n<\/tr>\n
793<\/td>\n7.2.1.6 TEK state machine <\/td>\n<\/tr>\n
795<\/td>\n7.2.1.6.1 States
7.2.1.6.2 Messages <\/td>\n<\/tr>\n
796<\/td>\n7.2.1.6.3 Events
7.2.1.6.4 Parameters
7.2.1.6.5 Actions <\/td>\n<\/tr>\n
799<\/td>\n7.2.2 PKM Version 2
7.2.2.1 TEK exchange overview for PMP topology <\/td>\n<\/tr>\n
800<\/td>\n7.2.2.2 Key derivation
7.2.2.2.1 RSA-based authorization
7.2.2.2.2 EAP authentication <\/td>\n<\/tr>\n
801<\/td>\n7.2.2.2.3 AK derivation
7.2.2.2.4 KEK derivation
7.2.2.2.5 GKEK derivation
7.2.2.2.6 Traffic encryption key (TEK) <\/td>\n<\/tr>\n
802<\/td>\n7.2.2.2.6.1 Counter-based TEK Generation for HO
7.2.2.2.7 Group traffic encryption key (GTEK) <\/td>\n<\/tr>\n
803<\/td>\n7.2.2.2.8 MBS traffic key (MTK)
7.2.2.2.9 Message authentication keys (HMAC\/CMAC) and KEK derivation
7.2.2.2.9.1 CMAC_KEY_COUNT_ management <\/td>\n<\/tr>\n
805<\/td>\n7.2.2.2.9.2 Derivation of message authentication codes <\/td>\n<\/tr>\n
806<\/td>\n7.2.2.2.10 Key hierarchy <\/td>\n<\/tr>\n
809<\/td>\n7.2.2.2.11 Maintenance of PMK and AK
7.2.2.2.12 PKMv2 PMK and AK switching methods
7.2.2.2.13 Security Zone keys derivation <\/td>\n<\/tr>\n
810<\/td>\n7.2.2.3 Associations
7.2.2.3.1 Security associations (SAs)
7.2.2.3.2 Group security associations (GSAs)
7.2.2.3.3 Multicast and broadcast service group security associations (MBSGSAs) <\/td>\n<\/tr>\n
811<\/td>\n7.2.2.3.4 Security zone SA
7.2.2.4 Security context
7.2.2.4.1 AK context <\/td>\n<\/tr>\n
813<\/td>\n7.2.2.4.2 GKEK context
7.2.2.4.3 PMK context
7.2.2.4.4 PAK context <\/td>\n<\/tr>\n
814<\/td>\n7.2.2.4.5 SZK context
7.2.2.4.6 SZKEK context <\/td>\n<\/tr>\n
815<\/td>\n7.2.2.7 AK transfer
7.2.2.8 Authentication state machine <\/td>\n<\/tr>\n
818<\/td>\n7.2.2.8.1 States <\/td>\n<\/tr>\n
819<\/td>\n7.2.2.8.2 Messages <\/td>\n<\/tr>\n
820<\/td>\n7.2.2.8.3 Events <\/td>\n<\/tr>\n
821<\/td>\n7.2.2.8.4 Parameters
7.2.2.8.5 Actions <\/td>\n<\/tr>\n
823<\/td>\n7.2.2.9 TEK state machine <\/td>\n<\/tr>\n
826<\/td>\n7.2.2.9.1 States
7.2.2.9.2 Messages <\/td>\n<\/tr>\n
827<\/td>\n7.2.2.9.3 Events
7.2.2.9.4 Parameters
7.2.2.9.5 Actions <\/td>\n<\/tr>\n
830<\/td>\n7.3 Dynamic SA creation and mapping
7.3.1 Dynamic SA creation
7.3.2 Dynamic mapping of SA
7.4 Key usage
7.4.1 BS key usage
7.4.1.1 AK key lifetime <\/td>\n<\/tr>\n
831<\/td>\n7.4.1.2 AK transition period on BS side
7.4.1.3 BS usage of AK <\/td>\n<\/tr>\n
833<\/td>\n7.4.1.4 TEK lifetime
7.4.1.5 BS usage of TEK <\/td>\n<\/tr>\n
835<\/td>\n7.4.2 SS key usage
7.4.2.1 SS reauthorization
7.4.2.2 SS usage of AK <\/td>\n<\/tr>\n
836<\/td>\n7.4.2.3 SS usage of TEK
7.4.3 Security zone keys usage
7.4.3.1 SZK usage
7.4.3.2 SZKEK usage
7.5 Cryptographic methods <\/td>\n<\/tr>\n
837<\/td>\n7.5.1 Data Encryption methods
7.5.1.1 Data encryption with DES in CBC mode
7.5.1.2 Data encryption with AES in CCM mode
7.5.1.2.1 PDU payload format <\/td>\n<\/tr>\n
838<\/td>\n7.5.1.2.2 Packet number (PN)
7.5.1.2.3 CCM algorithm <\/td>\n<\/tr>\n
839<\/td>\n7.5.1.2.4 Receive processing rules <\/td>\n<\/tr>\n
840<\/td>\n7.5.1.2.5 AES-CCM mode example encrypted MAC PDUs
7.5.1.2.6 Relay MAC PDU encryption with AES in CCM mode <\/td>\n<\/tr>\n
841<\/td>\n7.5.1.3 Data encryption with AES in CTR mode
7.5.1.3.1 Encrypted MBS PDU payload format <\/td>\n<\/tr>\n
842<\/td>\n7.5.1.4 Data encryption with AES in CBC mode <\/td>\n<\/tr>\n
843<\/td>\n7.5.1.4.1 CBC IV generation <\/td>\n<\/tr>\n
844<\/td>\n7.5.2 Encryption of TEK
7.5.2.1 Encryption of TEK with 3-DES
7.5.2.2 Encryption of TEK with RSA
7.5.2.3 Encryption of TEK-128 with AES <\/td>\n<\/tr>\n
845<\/td>\n7.5.2.4 Encryption of TEK-128 with AES key wrap
7.5.2.5 Encryption of AK with AES key wrap
7.5.2.6 Security zone keys encryption
7.5.3 Calculation of HMAC Digests <\/td>\n<\/tr>\n
846<\/td>\n7.5.4 Derivation of TEKs, KEKs, and message authentication keys
7.5.4.1 DES keys
7.5.4.2 Key encryption keys (KEKs) <\/td>\n<\/tr>\n
847<\/td>\n7.5.4.3 HMAC authentication keys
7.5.4.4 Cipher-based message authentication code (CMAC)
7.5.4.4.1 Calculation of CMAC value <\/td>\n<\/tr>\n
848<\/td>\n7.5.4.4.1.1 Calculation of CMAC value for Relay
7.5.4.5 Derivation of TEKs, KEKs, message authentication keys and GKEKs in PKMv2
7.5.4.5.1 AES KEKs in PKMv2 <\/td>\n<\/tr>\n
849<\/td>\n7.5.4.5.2 Encryption of GKEK in PKMv2
7.5.4.5.2.1 Encryption of GKEK with 3-DES in PKMv2
7.5.4.5.2.2 Encryption of GKEK with RSA in PKMv2
7.5.4.5.2.3 Encryption of GKEK with ECB mode AES in PKMv2
7.5.4.5.2.4 Encryption of GKEK with AES key wrap in PKMv2 <\/td>\n<\/tr>\n
850<\/td>\n7.5.4.6 Key derivation functions for PKMv2
7.5.4.6.1 Dot16KDF for PKMv2 <\/td>\n<\/tr>\n
851<\/td>\n7.5.7 Calculation of HMAC\/CMAC Digests in a security zone
7.5.8 Public-key encryption of AK
7.5.9 Digital signatures
7.6 Certificate profile
7.6.1 Certificate format <\/td>\n<\/tr>\n
852<\/td>\n7.6.1.1 tbsCertificate.validity.notBefore and tbsCertificate.validity.notAfter
7.6.1.2 tbsCertificate.serialNumber <\/td>\n<\/tr>\n
853<\/td>\n7.6.1.3 tbsCertificate.signature and signatureAlgorithm
7.6.1.4 tbsCertificate.issuer and tbsCertificate.subject
7.6.1.4.1 Manufacturer certificate <\/td>\n<\/tr>\n
854<\/td>\n7.6.1.4.2 SS certificate
7.6.1.4.3 BS certificate
7.6.1.5 tbsCertificate.subjectPublicKeyInfo <\/td>\n<\/tr>\n
855<\/td>\n7.6.1.6 tbsCertificate.issuerUniqueID and tbsCertificate.subjectUniqueID
7.6.1.7 tbsCertificate.extensions
7.6.1.7.1 SS certificates
7.6.1.7.2 Manufacturer certificates
7.6.1.8 signatureValue
7.6.2 SS certificate storage and management in the SS
7.6.3 Certificate processing and management in the BS <\/td>\n<\/tr>\n
856<\/td>\n7.7 Preauthentication
7.8 PKMv2
7.8.1 PKMv2 SA-TEK 3-way handshake <\/td>\n<\/tr>\n
858<\/td>\n7.8.1.1 PKMv2 SA-TEK-Response for RS
7.8.2 BS and SS RSA mutual authentication and AK exchange overview <\/td>\n<\/tr>\n
859<\/td>\n7.8.3 Multicast and broadcast service (MBS) support
7.8.3.1 MBS security associations <\/td>\n<\/tr>\n
860<\/td>\n7.8.3.2 MBS key management
7.8.3.2.1 MAK establishment
7.8.3.2.2 MGTEK establishment
7.8.3.2.3 MTK establishment
7.8.4 Relay multicast rekeying algorithm <\/td>\n<\/tr>\n
862<\/td>\n7.8.4.1 MRS rekeying algorithm
7.9 Multicast and broadcast rekeying algorithm (MBRA)
7.9.1 MBRA flow <\/td>\n<\/tr>\n
864<\/td>\n7.9.1.1 BS usage of GTEK <\/td>\n<\/tr>\n
865<\/td>\n7.9.1.2 SS usage of GTEK
7.9.2 Messages
7.9.3 Encryption of GKEK
7.9.4 Message authentication keys for the Key Update Command message <\/td>\n<\/tr>\n
867<\/td>\n8. Physical layer (PHY)
8.1 WirelessMAN-SC PHY specification
8.1.1 Overview
8.1.2 Framing
8.1.2.1 Supported frame durations <\/td>\n<\/tr>\n
868<\/td>\n8.1.3 Duplexing techniques and PHY Type parameter encodings
8.1.3.1 FDD operation <\/td>\n<\/tr>\n
869<\/td>\n8.1.3.2 TDD operation
8.1.3.2.1 TTG
8.1.3.2.2 RTG
8.1.4 DL PHY <\/td>\n<\/tr>\n
870<\/td>\n8.1.4.1 DL subframe <\/td>\n<\/tr>\n
871<\/td>\n8.1.4.1.1 DL burst preambles <\/td>\n<\/tr>\n
872<\/td>\n8.1.4.1.2 Frame control section <\/td>\n<\/tr>\n
873<\/td>\n8.1.4.1.2.1 DL-MAP elements
8.1.4.1.2.2 DL-MAP PHY synchronization field definition <\/td>\n<\/tr>\n
874<\/td>\n8.1.4.1.2.3 UL-MAP allocation start time definition
8.1.4.1.2.4 Required DCD parameters
8.1.4.1.2.5 Downlink_Burst_Profile <\/td>\n<\/tr>\n
876<\/td>\n8.1.4.2 DL burst allocation <\/td>\n<\/tr>\n
877<\/td>\n8.1.4.3 DL TCS <\/td>\n<\/tr>\n
879<\/td>\n8.1.4.4 DL PMD sublayer
8.1.4.4.1 Burst profile definitions
8.1.4.4.2 DL PHY SS capability set parameters <\/td>\n<\/tr>\n
880<\/td>\n8.1.4.4.3 Randomization
8.1.4.4.4 DL FEC <\/td>\n<\/tr>\n
881<\/td>\n8.1.4.4.4.1 Outer code for Code Types 1\u20133, DL <\/td>\n<\/tr>\n
882<\/td>\n8.1.4.4.4.2 Inner code for Code Type 2, DL <\/td>\n<\/tr>\n
883<\/td>\n8.1.4.4.4.3 Inner code for Code Type 3, DL
8.1.4.4.4.4 Code Type 4, DL <\/td>\n<\/tr>\n
888<\/td>\n8.1.4.4.5 Definition of parameters for burst profile (DIUC = 0)
8.1.4.4.6 Coding of the control portion of the frame
8.1.4.4.7 DL modulation <\/td>\n<\/tr>\n
893<\/td>\n8.1.4.4.8 Baseband pulse shaping
8.1.4.4.9 Transmitted waveform <\/td>\n<\/tr>\n
894<\/td>\n8.1.5 UL PHY
8.1.5.1 UL subframe <\/td>\n<\/tr>\n
895<\/td>\n8.1.5.1.1 UL burst preamble <\/td>\n<\/tr>\n
896<\/td>\n8.1.5.1.2 UL-MAP IE definition <\/td>\n<\/tr>\n
897<\/td>\n8.1.5.1.2.1 UL-MAP Extended IE format
8.1.5.1.2.2 UL-MAP Power Control IE format <\/td>\n<\/tr>\n
898<\/td>\n8.1.5.1.3 Required UCD parameters
8.1.5.1.4 UL channel
8.1.5.1.5 Uplink_Burst_Profile <\/td>\n<\/tr>\n
899<\/td>\n8.1.5.2 UL TCS
8.1.5.3 UL PMD sublayer <\/td>\n<\/tr>\n
900<\/td>\n8.1.5.3.1 Randomization for spectrum shaping
8.1.5.3.2 UL FEC
8.1.5.3.2.1 Outer code for Code Types 1\u20133, UL
8.1.5.3.2.2 Inner code for Code Type 2, UL <\/td>\n<\/tr>\n
901<\/td>\n8.1.5.3.2.3 Inner code for Code Type 3, UL
8.1.5.3.2.4 Code Type 4, UL
8.1.5.3.3 Shortening of FEC blocks in UL
8.1.5.3.4 Number of scheduled UL bursts per frame <\/td>\n<\/tr>\n
902<\/td>\n8.1.5.3.5 Coding of the Request IE Uplink_Burst_Profile
8.1.5.3.6 Coding of the initial ranging Uplink_Burst_Profile
8.1.5.3.7 UL modulation
8.1.5.3.8 Baseband pulse shaping
8.1.5.3.9 Transmitted waveform
8.1.6 Baud rates and channel bandwidths <\/td>\n<\/tr>\n
903<\/td>\n8.1.7 Radio subsystem control
8.1.7.1 Synchronization technique
8.1.7.2 Frequency control
8.1.7.3 Power control <\/td>\n<\/tr>\n
904<\/td>\n8.1.8 Minimum performance <\/td>\n<\/tr>\n
906<\/td>\n8.1.8.1 Propagation conditions
8.1.8.1.1 Propagation models <\/td>\n<\/tr>\n
907<\/td>\n8.1.8.1.2 Rain fades
8.1.8.2 Transmitter characteristics
8.1.8.2.1 Output power <\/td>\n<\/tr>\n
908<\/td>\n8.1.8.2.1.1 BS
8.1.8.2.1.2 SS
8.1.8.2.2 Emission mask and adjacent channel performance (NFD) <\/td>\n<\/tr>\n
909<\/td>\n8.1.8.2.3 Modulation accuracy and error vector magnitude (EVM) <\/td>\n<\/tr>\n
910<\/td>\n8.1.9 Channel quality measurements
8.1.9.1 Introduction <\/td>\n<\/tr>\n
911<\/td>\n8.1.9.2 RSSI mean and standard deviation <\/td>\n<\/tr>\n
912<\/td>\n8.1.9.3 CINR mean and standard deviation <\/td>\n<\/tr>\n
913<\/td>\n8.2 Reserved
8.3 WirelessMAN-OFDM PHY
8.3.1 Introduction
8.3.1.1 OFDM symbol description
8.3.1.1.1 Time domain <\/td>\n<\/tr>\n
914<\/td>\n8.3.1.1.2 Frequency domain <\/td>\n<\/tr>\n
915<\/td>\n8.3.2 OFDM symbol parameters and transmitted signal
8.3.2.1 Primitive parameter definitions
8.3.2.2 Derived parameter definitions
8.3.2.3 Transmitted signal
8.3.2.4 Parameters of transmitted signal
8.3.3 Channel coding <\/td>\n<\/tr>\n
917<\/td>\n8.3.3.1 Randomization <\/td>\n<\/tr>\n
918<\/td>\n8.3.3.2 FEC
8.3.3.2.1 Concatenated Reed-Solomon-convolutional code (RS-CC) <\/td>\n<\/tr>\n
920<\/td>\n8.3.3.2.2 Block turbo coding (BTC) (optional) <\/td>\n<\/tr>\n
923<\/td>\n8.3.3.2.3 Convolutional turbo codes (CTC) (optional)
8.3.3.2.3.1 CTC encoder <\/td>\n<\/tr>\n
925<\/td>\n8.3.3.2.3.2 CTC interleaver
8.3.3.2.3.3 Determination of CTC circulation states
8.3.3.2.3.4 CTC puncturing <\/td>\n<\/tr>\n
926<\/td>\n8.3.3.3 Interleaving <\/td>\n<\/tr>\n
927<\/td>\n8.3.3.4 Modulation
8.3.3.4.1 Data modulation <\/td>\n<\/tr>\n
928<\/td>\n8.3.3.4.2 Pilot modulation
8.3.3.4.3 Rate ID encodings <\/td>\n<\/tr>\n
929<\/td>\n8.3.3.5 Example OFDM UL RS-CC encoding
8.3.3.5.1 Full bandwidth (16 subchannels) <\/td>\n<\/tr>\n
930<\/td>\n8.3.3.5.2 Subchannelization (2 subchannels) <\/td>\n<\/tr>\n
931<\/td>\n8.3.3.5.3 Subchannelization (1 subchannel) <\/td>\n<\/tr>\n
932<\/td>\n8.3.3.6 Preamble structure and modulation <\/td>\n<\/tr>\n
934<\/td>\n8.3.4 Transmission convergence sublayer (TCS)
8.3.5 Frame structure
8.3.5.1 PMP <\/td>\n<\/tr>\n
939<\/td>\n8.3.5.1.1 PMP DL subchannelization zone <\/td>\n<\/tr>\n
941<\/td>\n8.3.5.2 PMP-AAS Zone <\/td>\n<\/tr>\n
946<\/td>\n8.3.5.3 Frame duration codes
8.3.5.4 Burst profile format <\/td>\n<\/tr>\n
947<\/td>\n8.3.6 Map message fields and IEs
8.3.6.1 DL-MAP PHY synchronization field
8.3.6.2 DL-MAP IE format <\/td>\n<\/tr>\n
948<\/td>\n8.3.6.2.1 DIUC allocations <\/td>\n<\/tr>\n
949<\/td>\n8.3.6.2.2 DL-MAP Extended IE format
8.3.6.2.3 Channel Measurement IE format <\/td>\n<\/tr>\n
950<\/td>\n8.3.6.2.4 DL-MAP AAS IE format
8.3.6.2.5 DL-MAP STC IE format <\/td>\n<\/tr>\n
951<\/td>\n8.3.6.2.6 DL-MAP Concurrent Transmission IE format
8.3.6.2.7 DL-MAP Physical Modifier IE format <\/td>\n<\/tr>\n
952<\/td>\n8.3.6.2.8 DL-MAP Dummy IE format
8.3.6.2.9 DL SUBCH IE format
8.3.6.2.10 OFDM Periodic Channel Measurement IE <\/td>\n<\/tr>\n
953<\/td>\n8.3.6.3 UL-MAP IE format <\/td>\n<\/tr>\n
955<\/td>\n8.3.6.3.1 UIUC allocations
8.3.6.3.2 UL-MAP Focused Contention IE format <\/td>\n<\/tr>\n
956<\/td>\n8.3.6.3.3 Subchannelized Network Entry IE
8.3.6.3.4 UL-MAP Extended IE format <\/td>\n<\/tr>\n
957<\/td>\n8.3.6.3.5 UL-MAP Power Control IE format
8.3.6.3.6 UL-MAP AAS IE format <\/td>\n<\/tr>\n
958<\/td>\n8.3.6.3.7 UL-MAP Physical Modifier IE <\/td>\n<\/tr>\n
959<\/td>\n8.3.6.3.8 UL-MAP Dummy IE format
8.3.6.3.9 Fast Ranging IE <\/td>\n<\/tr>\n
960<\/td>\n8.3.6.3.10 UL-MAP Fast Tracking IE
8.3.6.4 AAS-FBCK-REQ\/RSP message bodies <\/td>\n<\/tr>\n
962<\/td>\n8.3.6.5 AAS-BEAM-REQ\/RSP message <\/td>\n<\/tr>\n
965<\/td>\n8.3.6.6 Compressed private maps <\/td>\n<\/tr>\n
966<\/td>\n8.3.6.6.1 Compressed private DL-MAP <\/td>\n<\/tr>\n
967<\/td>\n8.3.6.6.2 Compressed Private UL-MAP <\/td>\n<\/tr>\n
968<\/td>\n8.3.6.7 Reduced private maps
8.3.6.7.1 Reduced private DL-MAP <\/td>\n<\/tr>\n
970<\/td>\n8.3.6.7.2 Reduced private UL-MAP <\/td>\n<\/tr>\n
971<\/td>\n8.3.7 Control mechanisms
8.3.7.1 Synchronization
8.3.7.1.1 Network synchronization <\/td>\n<\/tr>\n
972<\/td>\n8.3.7.2 Ranging <\/td>\n<\/tr>\n
974<\/td>\n8.3.7.2.1 Initial ranging in AAS systems <\/td>\n<\/tr>\n
976<\/td>\n8.3.7.3 Bandwidth requesting <\/td>\n<\/tr>\n
977<\/td>\n8.3.7.3.1 Parameter selection <\/td>\n<\/tr>\n
979<\/td>\n8.3.7.3.2 Full Contention transmission
8.3.7.3.3 Focused Contention transmission <\/td>\n<\/tr>\n
980<\/td>\n8.3.7.4 Power control
8.3.7.4.1 Closed-loop power control mode <\/td>\n<\/tr>\n
981<\/td>\n8.3.7.4.2 Open loop power control mode (optional) <\/td>\n<\/tr>\n
983<\/td>\n8.3.8 Tx diversity: space-time coding (STC) (optional)
8.3.8.1 Multiple input single output channel estimation and synchronization
8.3.8.2 STC encoding <\/td>\n<\/tr>\n
984<\/td>\n8.3.8.3 STC decoding <\/td>\n<\/tr>\n
985<\/td>\n8.3.9 Channel quality measurements
8.3.9.1 Introduction
8.3.9.2 RSSI mean and standard deviation <\/td>\n<\/tr>\n
986<\/td>\n8.3.9.3 CINR mean and standard deviation <\/td>\n<\/tr>\n
987<\/td>\n8.3.10 Transmitter requirements
8.3.10.1 Tx power level control
8.3.10.2 Transmitter spectral flatness <\/td>\n<\/tr>\n
988<\/td>\n8.3.10.3 Transmitter constellation error and test method <\/td>\n<\/tr>\n
989<\/td>\n8.3.10.4 Transmitter channel bandwidth and RF carrier frequencies
8.3.11 Receiver requirements <\/td>\n<\/tr>\n
990<\/td>\n8.3.11.1 Receiver sensitivity <\/td>\n<\/tr>\n
991<\/td>\n8.3.11.2 Receiver adjacent and alternate channel rejection
8.3.11.3 Receiver maximum input signal
8.3.11.4 Receiver maximum tolerable signal <\/td>\n<\/tr>\n
992<\/td>\n8.3.11.5 Receiver image rejection
8.3.12 Frequency and timing requirements
8.4 WirelessMAN-OFDMA PHY
8.4.1 Introduction
8.4.2 OFDMA symbol description, symbol parameters and transmitted signal
8.4.2.1 Time domain description <\/td>\n<\/tr>\n
993<\/td>\n8.4.2.2 Frequency domain description <\/td>\n<\/tr>\n
994<\/td>\n8.4.2.3 Primitive parameters
8.4.2.4 Derived parameters
8.4.2.5 Transmitted signal <\/td>\n<\/tr>\n
995<\/td>\n8.4.3 OFDMA basic terms definition
8.4.3.1 Slot and data region
8.4.3.2 Segment
8.4.3.3 Permutation zone
8.4.3.4 OFDMA data mapping <\/td>\n<\/tr>\n
998<\/td>\n8.4.4 Frame structure
8.4.4.1 TDD frame structure <\/td>\n<\/tr>\n
999<\/td>\n8.4.4.2 FDD frame structure <\/td>\n<\/tr>\n
1001<\/td>\n8.4.4.2.1 Group Switching <\/td>\n<\/tr>\n
1003<\/td>\n8.4.4.2.2 Frame partition signaling
8.4.4.2.3 Full Duplex Support <\/td>\n<\/tr>\n
1004<\/td>\n8.4.4.2.3.1 Full Duplex Support with FDD paired allocation IE
8.4.4.2.3.2 Full Duplex Support with aggregated HARQ channels
8.4.4.2.4 DCD
8.4.4.2.5 UCD
8.4.4.3 OFDMA Frame Parameters and Operations <\/td>\n<\/tr>\n
1006<\/td>\n8.4.4.4 DL frame prefix <\/td>\n<\/tr>\n
1009<\/td>\n8.4.4.5 Allocation of subchannels for FCH and DL-MAP and logical subchannel numbering <\/td>\n<\/tr>\n
1011<\/td>\n8.4.4.6 UL transmission allocations <\/td>\n<\/tr>\n
1013<\/td>\n8.4.4.7 Optional AAS support
8.4.4.7.1 AAS frame structure <\/td>\n<\/tr>\n
1014<\/td>\n8.4.4.7.2 Optional Diversity-Map scan <\/td>\n<\/tr>\n
1017<\/td>\n8.4.4.7.3 AAS diversity scan map network entry procedure
8.4.4.7.4 AAS preambles <\/td>\n<\/tr>\n
1018<\/td>\n8.4.4.7.4.1 AAS DL preamble <\/td>\n<\/tr>\n
1019<\/td>\n8.4.4.7.4.2 AAS UL preamble <\/td>\n<\/tr>\n
1020<\/td>\n8.4.4.8 TDD frame structure of MR-BS and RS <\/td>\n<\/tr>\n
1021<\/td>\n8.4.4.8.1 Frame structure for transparent mode
8.4.4.8.1.1 MR-BS frame structure <\/td>\n<\/tr>\n
1022<\/td>\n8.4.4.8.1.2 Relay frame structure <\/td>\n<\/tr>\n
1023<\/td>\n8.4.4.8.1.3 Direct relay zone (optional)
8.4.4.8.2 Frame structure for non-transparent TTR mode
8.4.4.8.2.1 MR-BS frame structure <\/td>\n<\/tr>\n
1025<\/td>\n8.4.4.8.2.2 Relay frame structure <\/td>\n<\/tr>\n
1026<\/td>\n8.4.4.8.3 Frame structure for STR mode <\/td>\n<\/tr>\n
1027<\/td>\n8.4.4.9 R-FCH channel
8.4.4.10 R-Zone prefix <\/td>\n<\/tr>\n
1030<\/td>\n8.4.4.11 FDD frame structure of MR-BS and RS
8.4.4.11.1 Frame Structure for transparent mode
8.4.4.11.2 Frame Structure for non-transparent TTR
8.4.4.11.3 Frame Structure for STR <\/td>\n<\/tr>\n
1031<\/td>\n8.4.5 Map message fields and IEs
8.4.5.1 DL-MAP PHY Synchronization field
8.4.5.2 Frame duration codes <\/td>\n<\/tr>\n
1032<\/td>\n8.4.5.3 DL-MAP IE format <\/td>\n<\/tr>\n
1034<\/td>\n8.4.5.3.1 DIUC allocation
8.4.5.3.2 DL-MAP Extended IE format <\/td>\n<\/tr>\n
1035<\/td>\n8.4.5.3.2.1 DL-MAP Extended IE encoding format <\/td>\n<\/tr>\n
1036<\/td>\n8.4.5.3.2.2 DL-MAP Extended-2 IE encoding format <\/td>\n<\/tr>\n
1037<\/td>\n8.4.5.3.2.3 DL-MAP Extended-3 IE encoding format <\/td>\n<\/tr>\n
1038<\/td>\n8.4.5.3.3 AAS DL IE format <\/td>\n<\/tr>\n
1039<\/td>\n8.4.5.3.4 STC DL Zone IE format <\/td>\n<\/tr>\n
1042<\/td>\n8.4.5.3.5 Channel Measurement IE <\/td>\n<\/tr>\n
1043<\/td>\n8.4.5.3.6 Data Location In Another BS IE <\/td>\n<\/tr>\n
1044<\/td>\n8.4.5.3.7 CID Switch IE
8.4.5.3.8 MIMO DL Basic IE format <\/td>\n<\/tr>\n
1047<\/td>\n8.4.5.3.9 MIMO DL Enhanced IE format <\/td>\n<\/tr>\n
1049<\/td>\n8.4.5.3.10 HARQ, Sub-MAP, and R-MAP Pointer IE <\/td>\n<\/tr>\n
1051<\/td>\n8.4.5.3.11 DL-MAP Physical Modifier IE <\/td>\n<\/tr>\n
1053<\/td>\n8.4.5.3.12 MBS MAP IE <\/td>\n<\/tr>\n
1056<\/td>\n8.4.5.3.13 DL PUSC Burst Allocation in Other Segment IE <\/td>\n<\/tr>\n
1057<\/td>\n8.4.5.3.14 HO Anchor Active DL MAP IE
8.4.5.3.15 HO Active Anchor DL MAP IE <\/td>\n<\/tr>\n
1058<\/td>\n8.4.5.3.16 HO CID Translation MAP IE <\/td>\n<\/tr>\n
1059<\/td>\n8.4.5.3.17 MIMO in Another BS IE <\/td>\n<\/tr>\n
1060<\/td>\n8.4.5.3.18 Macro-MIMO DL Basic IE format <\/td>\n<\/tr>\n
1062<\/td>\n8.4.5.3.19 UL Noise and Interference Level IE format <\/td>\n<\/tr>\n
1064<\/td>\n8.4.5.3.20 Dedicated DL Control IE
8.4.5.3.20.1 Reduced CID IE <\/td>\n<\/tr>\n
1066<\/td>\n8.4.5.3.20.2 Skip IE <\/td>\n<\/tr>\n
1067<\/td>\n8.4.5.3.21 HARQ DL MAP IE <\/td>\n<\/tr>\n
1082<\/td>\n8.4.5.3.21.1 Dedicated MIMO DL Control IE format <\/td>\n<\/tr>\n
1085<\/td>\n8.4.5.3.22 DL HARQ ACK IE
8.4.5.3.23 Enhanced DL MAP IE <\/td>\n<\/tr>\n
1086<\/td>\n8.4.5.3.24 Closed-loop MIMO DL enhanced IE format <\/td>\n<\/tr>\n
1088<\/td>\n8.4.5.3.25 Broadcast Control Pointer IE <\/td>\n<\/tr>\n
1089<\/td>\n8.4.5.3.26 AAS SDMA DL IE format <\/td>\n<\/tr>\n
1092<\/td>\n8.4.5.3.27 PUSC ASCA Allocation IE <\/td>\n<\/tr>\n
1093<\/td>\n8.4.5.3.28 H-FDD Group Switch IE <\/td>\n<\/tr>\n
1094<\/td>\n8.4.5.3.29 Persistent HARQ DL MAP Allocation IE <\/td>\n<\/tr>\n
1128<\/td>\n8.4.5.3.30 Power Boosting IE <\/td>\n<\/tr>\n
1129<\/td>\n8.4.5.3.31 Extended Broadcast Control Pointer IE
8.4.5.3.32 MR_DL-MAP MONITOR IE <\/td>\n<\/tr>\n
1130<\/td>\n8.4.5.3.33 DL Burst Transmit IE format <\/td>\n<\/tr>\n
1131<\/td>\n8.4.5.3.34 OFDMA Periodic_Channel Measurement IE <\/td>\n<\/tr>\n
1132<\/td>\n8.4.5.4 UL-MAP IE format <\/td>\n<\/tr>\n
1135<\/td>\n8.4.5.4.1 UIUC allocation <\/td>\n<\/tr>\n
1136<\/td>\n8.4.5.4.2 PAPR Reduction\/Safety Zone\/Sounding Zone Allocation IE <\/td>\n<\/tr>\n
1137<\/td>\n8.4.5.4.3 CDMA Allocation UL-MAP IE format <\/td>\n<\/tr>\n
1138<\/td>\n8.4.5.4.4 UL-MAP Extended IE
8.4.5.4.4.1 UL-MAP Extended IE format <\/td>\n<\/tr>\n
1139<\/td>\n8.4.5.4.4.2 UL-MAP Extended-2 IE format <\/td>\n<\/tr>\n
1140<\/td>\n8.4.5.4.4.3 UL-MAP Extended-3 IE format <\/td>\n<\/tr>\n
1141<\/td>\n8.4.5.4.5 Power Control IE format
8.4.5.4.6 AAS UL IE format <\/td>\n<\/tr>\n
1142<\/td>\n8.4.5.4.7 UL Zone Switch IE format <\/td>\n<\/tr>\n
1144<\/td>\n8.4.5.4.8 Mini-Subchannel Allocation IE <\/td>\n<\/tr>\n
1145<\/td>\n8.4.5.4.9 Fast-Feedback Allocation IE <\/td>\n<\/tr>\n
1146<\/td>\n8.4.5.4.10 MIMO UL Basic IE format <\/td>\n<\/tr>\n
1148<\/td>\n8.4.5.4.11 CQICH Allocation IE Format <\/td>\n<\/tr>\n
1152<\/td>\n8.4.5.4.12 UL-MAP Physical Modifier IE <\/td>\n<\/tr>\n
1153<\/td>\n8.4.5.4.13 UL Allocation Start IE <\/td>\n<\/tr>\n
1154<\/td>\n8.4.5.4.14 CQICH Enhanced Allocation IE format <\/td>\n<\/tr>\n
1157<\/td>\n8.4.5.4.15 UL PUSC Burst Allocation in Other Segment IE <\/td>\n<\/tr>\n
1158<\/td>\n8.4.5.4.16 HO Anchor Active UL-MAP IE <\/td>\n<\/tr>\n
1159<\/td>\n8.4.5.4.17 HO Active Anchor UL MAP IE
8.4.5.4.18 MIMO UL Enhanced IE format <\/td>\n<\/tr>\n
1160<\/td>\n8.4.5.4.19 OFDMA Fast Ranging IE format <\/td>\n<\/tr>\n
1161<\/td>\n8.4.5.4.20 UL-MAP Fast Tracking IE <\/td>\n<\/tr>\n
1162<\/td>\n8.4.5.4.20.1 UL-MAP Fast Tracking IE handing in an MR system <\/td>\n<\/tr>\n
1163<\/td>\n8.4.5.4.21 Anchor BS Switch IE <\/td>\n<\/tr>\n
1165<\/td>\n8.4.5.4.22 HARQ UL-MAP IE <\/td>\n<\/tr>\n
1175<\/td>\n8.4.5.4.22.1 Dedicated UL Control IE <\/td>\n<\/tr>\n
1176<\/td>\n8.4.5.4.22.2 Dedicated MIMO UL Control IE format <\/td>\n<\/tr>\n
1177<\/td>\n8.4.5.4.23 HARQ ACK Region Allocation IE <\/td>\n<\/tr>\n
1178<\/td>\n8.4.5.4.24 UL Sounding Command IE
8.4.5.4.25 AAS SDMA UL IE format <\/td>\n<\/tr>\n
1181<\/td>\n8.4.5.4.26 Feedback Polling IE <\/td>\n<\/tr>\n
1183<\/td>\n8.4.5.4.27 Uplink Power Control Bitmap IE <\/td>\n<\/tr>\n
1184<\/td>\n8.4.5.4.28 Persistent HARQ UL MAP Allocation IE <\/td>\n<\/tr>\n
1211<\/td>\n8.4.5.4.29 FDD Paired Allocation IE <\/td>\n<\/tr>\n
1212<\/td>\n8.4.5.4.30 UL_Burst _Receive_IE format
8.4.5.4.31 RS MIMO in UL IE format <\/td>\n<\/tr>\n
1214<\/td>\n8.4.5.4.32 MR_UL-MAP_MONITOR IE <\/td>\n<\/tr>\n
1215<\/td>\n8.4.5.5 Burst profile format <\/td>\n<\/tr>\n
1217<\/td>\n8.4.5.6 Compressed maps <\/td>\n<\/tr>\n
1218<\/td>\n8.4.5.6.1 Compressed DL-MAP <\/td>\n<\/tr>\n
1220<\/td>\n8.4.5.6.2 Compressed UL-MAP
8.4.5.7 AAS-FBCK-REQ\/RSP message bodies <\/td>\n<\/tr>\n
1222<\/td>\n8.4.5.8 Optional reduced AAS private maps <\/td>\n<\/tr>\n
1223<\/td>\n8.4.5.9 Reduced AAS private maps
8.4.5.9.1 Reduced AAS private DL-MAP <\/td>\n<\/tr>\n
1227<\/td>\n8.4.5.9.2 Reduced AAS private UL-MAP <\/td>\n<\/tr>\n
1229<\/td>\n8.4.5.10 R-MAP message <\/td>\n<\/tr>\n
1230<\/td>\n8.4.5.10.1 R-link specific IE format <\/td>\n<\/tr>\n
1231<\/td>\n8.4.5.10.2 RS UL DCH assignment IE <\/td>\n<\/tr>\n
1233<\/td>\n8.4.5.10.3 RS_UL_DCH HARQ RETX IE <\/td>\n<\/tr>\n
1234<\/td>\n8.4.5.10.4 RS HARQ DL MAP IE <\/td>\n<\/tr>\n
1236<\/td>\n8.4.5.10.5 UL relay zone configuration IE <\/td>\n<\/tr>\n
1237<\/td>\n8.4.5.10.6 HARQ ACK region allocation for Relay Data IE <\/td>\n<\/tr>\n
1238<\/td>\n8.4.5.10.7 MR_DL-MAP MONITOR IE <\/td>\n<\/tr>\n
1239<\/td>\n8.4.5.10.8 MR_UL-MAP_MONITOR IE <\/td>\n<\/tr>\n
1240<\/td>\n8.4.5.10.9 RS CQICH Control IE <\/td>\n<\/tr>\n
1241<\/td>\n8.4.5.10.10 Aggregated HARQ ACK region allocation IE <\/td>\n<\/tr>\n
1242<\/td>\n8.4.5.10.11 RS MIMO in UL IE format <\/td>\n<\/tr>\n
1243<\/td>\n8.4.6 OFDMA subcarrier allocations <\/td>\n<\/tr>\n
1244<\/td>\n8.4.6.1 Downlink (DL)
8.4.6.1.1 Preamble <\/td>\n<\/tr>\n
1264<\/td>\n8.4.6.1.1.1 Common SYNC symbol (optional)
8.4.6.1.1.2 Common SYNC symbol sequence <\/td>\n<\/tr>\n
1265<\/td>\n8.4.6.1.1.3 Relay amble
8.4.6.1.1.4 R-amble Repetition Scheme <\/td>\n<\/tr>\n
1268<\/td>\n8.4.6.1.2 Symbol structure
8.4.6.1.2.1 Symbol structure for PUSC <\/td>\n<\/tr>\n
1272<\/td>\n8.4.6.1.2.2 Symbol structure for FUSC <\/td>\n<\/tr>\n
1276<\/td>\n8.4.6.1.2.3 Additional optional symbol structure for FUSC <\/td>\n<\/tr>\n
1279<\/td>\n8.4.6.1.2.4 Optional DL tile usage of subchannels\u2014TUSC1 <\/td>\n<\/tr>\n
1280<\/td>\n8.4.6.1.2.5 Optional DL tile usage of subchannels\u2014TUSC2
8.4.6.1.2.6 TUSC1\/TUSC2 support for SDMA
8.4.6.2 Uplink (UL) <\/td>\n<\/tr>\n
1282<\/td>\n8.4.6.2.1 Symbol structure for subchannel (PUSC) <\/td>\n<\/tr>\n
1283<\/td>\n8.4.6.2.2 Partitioning of subcarriers into subchannels in the UL <\/td>\n<\/tr>\n
1284<\/td>\n8.4.6.2.3 UL permutation example
8.4.6.2.4 Partition a slot to mini-subchannels <\/td>\n<\/tr>\n
1286<\/td>\n8.4.6.2.5 Additional optional symbol structure for PUSC <\/td>\n<\/tr>\n
1288<\/td>\n8.4.6.2.5.1 Symbol structure for subchannel
8.4.6.2.5.2 Partitioning of subcarriers into subchannels in the UL <\/td>\n<\/tr>\n
1289<\/td>\n8.4.6.2.6 Data subchannel rotation scheme
8.4.6.2.7 Optional UL channel sounding in TDD systems
8.4.6.2.7.1 Channel sounding <\/td>\n<\/tr>\n
1297<\/td>\n8.4.6.2.7.2 Power assignment <\/td>\n<\/tr>\n
1298<\/td>\n8.4.6.2.7.3 Direct transmission of DL channel coefficients <\/td>\n<\/tr>\n
1300<\/td>\n8.4.6.2.7.4 Feedback of received pilot coefficients
8.4.6.3 Optional adjacent subcarrier permutations for AMC <\/td>\n<\/tr>\n
1302<\/td>\n8.4.6.3.1 AMC optional permutation <\/td>\n<\/tr>\n
1304<\/td>\n8.4.6.3.2 Band-AMC operation in normal DL\/UL-MAP <\/td>\n<\/tr>\n
1305<\/td>\n8.4.6.3.3 AMC support for SDMA <\/td>\n<\/tr>\n
1306<\/td>\n8.4.6.4 Optional permutations for PUSC
8.4.6.4.1 Optional permutation for PUSC adjacent subcarrier allocation (PUSC-ASCA)
8.4.6.4.1.1 Allocation using adjacent clusters <\/td>\n<\/tr>\n
1308<\/td>\n8.4.6.4.1.2 Allocation using distributed clusters
8.4.7 OFDMA ranging <\/td>\n<\/tr>\n
1309<\/td>\n8.4.7.1 Initial ranging and HO ranging transmissions <\/td>\n<\/tr>\n
1310<\/td>\n8.4.7.2 Periodic ranging and BR transmissions <\/td>\n<\/tr>\n
1311<\/td>\n8.4.7.3 Ranging codes <\/td>\n<\/tr>\n
1312<\/td>\n8.4.7.4 Ranging and BR opportunity size <\/td>\n<\/tr>\n
1313<\/td>\n8.4.7.5 OFDMA ranging in an MR system
8.4.8 Space-time coding (STC) (optional)
8.4.8.1 STC using two antennas <\/td>\n<\/tr>\n
1314<\/td>\n8.4.8.1.1 Multiple-input, single-output channel estimation and synchronization
8.4.8.1.2 STC using two antennas
8.4.8.1.2.1 STC encoding <\/td>\n<\/tr>\n
1317<\/td>\n8.4.8.1.2.2 STC decoding
8.4.8.1.3 Frequency hopping diversity coding (FHDC) <\/td>\n<\/tr>\n
1318<\/td>\n8.4.8.1.4 STC\/FHDC configurations <\/td>\n<\/tr>\n
1319<\/td>\n8.4.8.1.5 UL using STC <\/td>\n<\/tr>\n
1320<\/td>\n8.4.8.1.5.1 UL using STC in an MR system <\/td>\n<\/tr>\n
1321<\/td>\n8.4.8.1.6 STC of two antennas using directivity through four antennas
8.4.8.2 STC for four antennas <\/td>\n<\/tr>\n
1322<\/td>\n8.4.8.2.1 STC for four antennas using PUSC
8.4.8.2.2 STC for four antennas using FUSC <\/td>\n<\/tr>\n
1323<\/td>\n8.4.8.2.3 STC configurations <\/td>\n<\/tr>\n
1324<\/td>\n8.4.8.2.4 MIMO MDHO-based macro-diversity transmission
8.4.8.3 STC for the optional zones in the DL <\/td>\n<\/tr>\n
1326<\/td>\n8.4.8.3.1 Symbol structure for optional AMC and optional FUSC
8.4.8.3.1.1 Allocation of pilot subcarriers <\/td>\n<\/tr>\n
1328<\/td>\n8.4.8.3.1.2 Allocation of data subchannels <\/td>\n<\/tr>\n
1333<\/td>\n8.4.8.3.2 Symbol structure for the optional PUSC-ASCA
8.4.8.3.3 Transmission schemes for 2-antenna BS in DL
8.4.8.3.4 Transmission schemes for 3-antenna BS in DL <\/td>\n<\/tr>\n
1335<\/td>\n8.4.8.3.4.1 Enhanced 3-Tx Matrix A with Antenna Grouping
8.4.8.3.4.2 Enhanced 3-Tx Matrix B with antenna grouping <\/td>\n<\/tr>\n
1336<\/td>\n8.4.8.3.4.3 3-Tx Matrix C with antenna selection <\/td>\n<\/tr>\n
1337<\/td>\n8.4.8.3.5 Transmission schemes for 4-antenna BS <\/td>\n<\/tr>\n
1338<\/td>\n8.4.8.3.5.1 Enhanced 4-Tx Matrix A with antenna grouping <\/td>\n<\/tr>\n
1339<\/td>\n8.4.8.3.5.2 Enhanced 4-Tx Matrix B with antenna grouping <\/td>\n<\/tr>\n
1340<\/td>\n8.4.8.3.5.3 4-Tx Matrix C with antenna selection <\/td>\n<\/tr>\n
1341<\/td>\n8.4.8.3.6 MIMO precoding <\/td>\n<\/tr>\n
1343<\/td>\n8.4.8.4 STC for the optional zones in the UL
8.4.8.4.1 Allocation of pilot subcarriers <\/td>\n<\/tr>\n
1344<\/td>\n8.4.8.4.2 Allocation of data subchannels <\/td>\n<\/tr>\n
1345<\/td>\n8.4.8.4.3 Transmission schemes for 2-antenna MS in UL
8.4.8.5 MIMO midamble <\/td>\n<\/tr>\n
1346<\/td>\n8.4.8.5.1 Midamble sequence <\/td>\n<\/tr>\n
1348<\/td>\n8.4.8.5.1.1 PAPR reduction sequence for BS with two antennas <\/td>\n<\/tr>\n
1354<\/td>\n8.4.8.5.1.2 PAPR reduction sequence for BS with three or four antennas <\/td>\n<\/tr>\n
1358<\/td>\n8.4.8.6 STC subpacket combining
8.4.8.7 Cyclic delay diversity (CDD) <\/td>\n<\/tr>\n
1359<\/td>\n8.4.8.8 Cooperative relaying <\/td>\n<\/tr>\n
1360<\/td>\n8.4.9 Channel coding <\/td>\n<\/tr>\n
1361<\/td>\n8.4.9.1 Randomization <\/td>\n<\/tr>\n
1362<\/td>\n8.4.9.2 Encoding <\/td>\n<\/tr>\n
1363<\/td>\n8.4.9.2.1 Convolutional coding (CC) <\/td>\n<\/tr>\n
1364<\/td>\n8.4.9.2.1.1 Incremental redundancy HARQ support (optional) <\/td>\n<\/tr>\n
1365<\/td>\n8.4.9.2.2 Block turbo coding (BTC) (optional) <\/td>\n<\/tr>\n
1367<\/td>\n8.4.9.2.3 Convolutional turbo codes (CTCs) (optional)
8.4.9.2.3.1 CTC encoder <\/td>\n<\/tr>\n
1371<\/td>\n8.4.9.2.3.2 CTC interleaver
8.4.9.2.3.3 Determination of CTC circulation states <\/td>\n<\/tr>\n
1372<\/td>\n8.4.9.2.3.4 Subpacket generation <\/td>\n<\/tr>\n
1375<\/td>\n8.4.9.2.3.5 Optional IR HARQ support <\/td>\n<\/tr>\n
1387<\/td>\n8.4.9.2.4 Zero tailed convolutional coding (optional)
8.4.9.2.5 Low density parity check (LDPC) code (optional)
8.4.9.2.5.1 Code description <\/td>\n<\/tr>\n
1390<\/td>\n8.4.9.2.5.2 Code rate and block size adjustment <\/td>\n<\/tr>\n
1391<\/td>\n8.4.9.2.5.3 Packet encoding
8.4.9.3 Interleaving <\/td>\n<\/tr>\n
1392<\/td>\n8.4.9.3.1 Optional interleaver for convolutional coding
8.4.9.4 Modulation
8.4.9.4.1 Subcarrier randomization <\/td>\n<\/tr>\n
1394<\/td>\n8.4.9.4.2 Data modulation <\/td>\n<\/tr>\n
1395<\/td>\n8.4.9.4.3 Pilot modulation
8.4.9.4.3.1 Preamble pilot modulation <\/td>\n<\/tr>\n
1396<\/td>\n8.4.9.4.3.2 Ranging pilot modulation
8.4.9.4.3.3 Relay amble pilot modulation
8.4.9.4.4 Example of OFDMA UL CC encoding <\/td>\n<\/tr>\n
1398<\/td>\n8.4.9.5 Repetition
8.4.9.6 Zone boosting <\/td>\n<\/tr>\n
1399<\/td>\n8.4.9.7 Multiple HARQ (optional)
8.4.9.7.1 Generic chase HARQ <\/td>\n<\/tr>\n
1400<\/td>\n8.4.9.7.2 CC-IR HARQ
8.4.10 Control mechanisms
8.4.10.1 Synchronization
8.4.10.1.1 Network synchronization
8.4.10.1.2 SS synchronization
8.4.10.2 Ranging <\/td>\n<\/tr>\n
1401<\/td>\n8.4.10.3 Power control <\/td>\n<\/tr>\n
1403<\/td>\n8.4.10.3.1 Closed-loop power control
8.4.10.3.2 Optional open-loop power control <\/td>\n<\/tr>\n
1405<\/td>\n8.4.10.3.2.1 UL Tx power and Headroom transmission condition <\/td>\n<\/tr>\n
1406<\/td>\n8.4.10.3.2.2 Power control in handoff <\/td>\n<\/tr>\n
1407<\/td>\n8.4.10.4 Power control in MR networks <\/td>\n<\/tr>\n
1408<\/td>\n8.4.10.4.1 Power control of RS
8.4.10.4.2 Power control of SS
8.4.11 Fast-feedback channels <\/td>\n<\/tr>\n
1410<\/td>\n8.4.11.1 Fast DL measurement feedback <\/td>\n<\/tr>\n
1414<\/td>\n8.4.11.2 Fast MIMO feedback
8.4.11.3 Mode selection feedback <\/td>\n<\/tr>\n
1416<\/td>\n8.4.11.4 Effective CINR feedback for fast-feedback channel <\/td>\n<\/tr>\n
1417<\/td>\n8.4.11.5 Enhanced fast-feedback channels <\/td>\n<\/tr>\n
1421<\/td>\n8.4.11.6 Fast DL measurement feedback for enhanced fast-feedback channel
8.4.11.7 Fast MIMO feedback of quantized precoding weight for enhanced fast-feedback channel <\/td>\n<\/tr>\n
1422<\/td>\n8.4.11.8 MIMO mode feedback for enhanced fast-feedback channel <\/td>\n<\/tr>\n
1425<\/td>\n8.4.11.9 Anchor BS report
8.4.11.10 UEP fast-feedback <\/td>\n<\/tr>\n
1427<\/td>\n8.4.11.11 Band AMC differential CINR feedback for enhanced fast-feedback channel
8.4.11.12 Indication flag feedback
8.4.11.13 Primary and secondary fast-feedback channels <\/td>\n<\/tr>\n
1429<\/td>\n8.4.11.14 Extended rtPS BR
8.4.11.15 MIMO feedback for Tx beamforming <\/td>\n<\/tr>\n
1438<\/td>\n8.4.11.16 MAP ACK Channel
8.4.11.17 MAP NACK Channel <\/td>\n<\/tr>\n
1439<\/td>\n8.4.12 Channel quality measurements
8.4.12.1 Introduction
8.4.12.2 RSSI mean and standard deviation <\/td>\n<\/tr>\n
1440<\/td>\n8.4.12.3 CINR mean and standard deviation <\/td>\n<\/tr>\n
1443<\/td>\n8.4.12.4 Optional frequency selectivity characterization
8.4.12.5 Channel quality measuring and reporting in an MR system
8.4.13 Transmitter requirements
8.4.13.1 Tx power level control <\/td>\n<\/tr>\n
1444<\/td>\n8.4.13.2 Transmitter spectral flatness
8.4.13.3 Transmitter constellation error and test method <\/td>\n<\/tr>\n
1445<\/td>\n8.4.13.3.1 RMS constellation error measurement for BS (DL)
8.4.13.3.2 RMS constellation error measurement for SS <\/td>\n<\/tr>\n
1446<\/td>\n8.4.13.3.3 Calculation of RMS constellation error
8.4.13.3.4 Unmodulated subcarrier errors for SS <\/td>\n<\/tr>\n
1447<\/td>\n8.4.13.4 Transmitter reference timing accuracy
8.4.14 Receiver requirements
8.4.14.1 OFDMA PHY requirements for enhanced HO performance
8.4.14.1.1 Receiver sensitivity <\/td>\n<\/tr>\n
1449<\/td>\n8.4.14.1.2 MS UL Tx time tracking accuracy
8.4.14.1.3 MS autonomous neighbor cell scanning
8.4.14.2 Receiver adjacent and nonadjacent channel rejection
8.4.14.3 Receiver maximum input signal
8.4.14.3.1 SS receiver maximum input signal <\/td>\n<\/tr>\n
1450<\/td>\n8.4.14.3.2 BS receiver maximum input signal
8.4.14.4 Receiver maximum tolerable signal
8.4.14.4.1 SS receiver maximum tolerable signal
8.4.14.4.2 BS receiver maximum tolerable signal
8.4.15 Frequency control requirements
8.4.15.1 Center frequency and symbol clock frequency tolerance
8.4.16 Optional HARQ support
8.4.16.1 Optional Chase HARQ support <\/td>\n<\/tr>\n
1451<\/td>\n8.4.16.1.1 HARQ retransmission process
8.4.16.1.2 CRC
8.4.16.1.3 Concurrent transmission of UL HARQ bursts
8.4.16.1.4 Encoding
8.4.16.2 Optional IR HARQ for convolutional code <\/td>\n<\/tr>\n
1452<\/td>\n8.4.16.3 UL ACK channel <\/td>\n<\/tr>\n
1454<\/td>\n8.4.16.3.1 ACK\/NAK handling for an MR system
8.5 WirelessHUMAN specific components
8.5.1 Channelization <\/td>\n<\/tr>\n
1456<\/td>\n8.5.2 Tx spectral mask <\/td>\n<\/tr>\n
1457<\/td>\n9. Configuration
9.1 SS IP addressing used on secondary management connection
9.1.1 DHCP fields used by the SS
9.1.2 Mobile IP v4 fields used by the MS <\/td>\n<\/tr>\n
1458<\/td>\n9.2 SS Configuration file
9.2.1 SS binary configuration file format <\/td>\n<\/tr>\n
1459<\/td>\n9.2.2 Configuration file settings
9.2.3 Configuration file creation <\/td>\n<\/tr>\n
1460<\/td>\n9.2.3.1 SS MIC calculation <\/td>\n<\/tr>\n
1461<\/td>\n9.3 ASN.1 Management Information Base <\/td>\n<\/tr>\n
1462<\/td>\n9.3.1 WMAN-IF-MIB module
9.3.2 WMAN-DEV-MIB module
9.3.3 WMAN-IF2-BS-MIB module
9.3.4 WMAN-IF2M-BS-MIB module <\/td>\n<\/tr>\n
1463<\/td>\n9.3.5 WMAN-IF2F-BS-MIB module
9.3.6 WMAN-IF2-SS-MIB module
9.3.7 WMAN-IF2-TC-MIB module
9.4 Management protocols
9.4.1 SNMP <\/td>\n<\/tr>\n
1464<\/td>\n9.4.1.1 Relationship with interface MIB
9.4.1.1.1 MIB-2 integration
9.4.1.1.2 Usage of MIB-II tables <\/td>\n<\/tr>\n
1467<\/td>\n9.4.1.2 Events and traps
9.5 RS configuration <\/td>\n<\/tr>\n
1469<\/td>\n10. Parameters and constants
10.1 Global values <\/td>\n<\/tr>\n
1483<\/td>\n10.2 PKM parameter values <\/td>\n<\/tr>\n
1485<\/td>\n10.3 PHY-specific values
10.3.1 WirelessMAN-SC parameter and constant definitions
10.3.1.1 PS
10.3.1.2 Symbol rate
10.3.1.3 UL center frequency
10.3.1.4 DL center frequency
10.3.1.5 Tolerated poll jitter
10.3.1.6 Allocation Start Time <\/td>\n<\/tr>\n
1486<\/td>\n10.3.1.7 Timing Adjust Units
10.3.2 Reserved
10.3.3 WirelessMAN-OFDM parameters and constant definitions
10.3.3.1 Uplink Allocation Start Time
10.3.3.2 PS
10.3.3.3 Timing adjust units
10.3.4 WirelessMAN-OFDMA parameters and constant definitions
10.3.4.1 Uplink Allocation Start Time
10.3.4.2 PS
10.3.4.3 Timing adjust units
10.4 Well-known addresses and identifiers <\/td>\n<\/tr>\n
1487<\/td>\n10.5 Coexistence specific values
10.5.1 Coexistence Control Channel <\/td>\n<\/tr>\n
1488<\/td>\n10.5.2 CSI timing parameters <\/td>\n<\/tr>\n
1489<\/td>\n10.5.3 CX-CBI parameters
10.5.4 Timer for CX-FWD-RSP and CX-FWD-ACK messages <\/td>\n<\/tr>\n
1491<\/td>\n11. TLV encodings
11.1 Common encodings <\/td>\n<\/tr>\n
1493<\/td>\n11.1.1 Current Tx power
11.1.2 Authentication tuples
11.1.2.1 HMAC Tuple <\/td>\n<\/tr>\n
1494<\/td>\n11.1.2.2 CMAC Tuple <\/td>\n<\/tr>\n
1495<\/td>\n11.1.2.3 Short-HMAC Tuple
11.1.3 MAC version encoding <\/td>\n<\/tr>\n
1496<\/td>\n11.1.4 Service flow descriptors
11.1.5 Vendor ID encoding <\/td>\n<\/tr>\n
1497<\/td>\n11.1.6 Vendor-specific information
11.1.7 Sleep mode specific information
11.1.7.1 Enabled-Action-Triggered <\/td>\n<\/tr>\n
1498<\/td>\n11.1.7.2 SLPID_Update
11.1.7.3 Next Periodic Ranging
11.1.8 Idle mode specific information
11.1.8.1 MAC Hash Skip Threshold <\/td>\n<\/tr>\n
1499<\/td>\n11.1.8.2 Paging Controller ID
11.1.8.3 Paging information
11.1.9 SA-TEK-Update <\/td>\n<\/tr>\n
1501<\/td>\n11.1.10 NSP List encodings
11.1.10.1 NSP List
11.1.10.2 Verbose NSP Name List
11.1.11 MIH message encodings
11.1.11.1 MIHF frame <\/td>\n<\/tr>\n
1502<\/td>\n11.1.11.2 MIHF frame type
11.1.11.3 Query ID
11.1.12 MCID Update Management encoding
11.1.12.1 MCID pre-allocation and transmission info <\/td>\n<\/tr>\n
1503<\/td>\n11.1.12.2 MCID Continuity and Transmission Info <\/td>\n<\/tr>\n
1504<\/td>\n11.1.13 Path management message encodings <\/td>\n<\/tr>\n
1505<\/td>\n11.1.13.1 Path ID encoding
11.1.13.2 Path Addition TLV
11.1.13.3 Path CID Binding Update TLV
11.1.13.4 Path Info TLV <\/td>\n<\/tr>\n
1506<\/td>\n11.1.14 SA_SZK_Update tuple
11.1.15 DCD and UCD contents <\/td>\n<\/tr>\n
1507<\/td>\n11.1.16 Network address for intersystem communication encoding
11.1.17 ABS information for direct HO encoding <\/td>\n<\/tr>\n
1508<\/td>\n11.1.17.1 SFH change count and SP reference indicator
11.1.17.2 S-SFH SP1 IE
11.1.17.3 S-SFH SP2 IE
11.1.17.4 S-SFH SP3 IE <\/td>\n<\/tr>\n
1509<\/td>\n11.2 Configuration file encodings
11.2.1 SS MIC configuration setting
11.2.2 Software upgrade descriptors
11.2.2.1 Vendor ID
11.2.2.2 Hardware ID <\/td>\n<\/tr>\n
1510<\/td>\n11.2.2.3 Software version
11.2.2.4 Upgrade filename
11.2.3 Software upgrade TFTP server
11.2.4 TFTP Server Timestamp
11.2.5 MIB object write-access control <\/td>\n<\/tr>\n
1511<\/td>\n11.2.6 Set MIB Object <\/td>\n<\/tr>\n
1512<\/td>\n11.3 UCD management message encodings
11.3.1 UCD channel encodings <\/td>\n<\/tr>\n
1524<\/td>\n11.3.1.1 Uplink burst profile encodings <\/td>\n<\/tr>\n
1527<\/td>\n11.4 DCD management message encodings
11.4.1 DCD channel encodings <\/td>\n<\/tr>\n
1539<\/td>\n11.4.2 Downlink burst profile encodings <\/td>\n<\/tr>\n
1542<\/td>\n11.5 RNG-REQ management message encodings <\/td>\n<\/tr>\n
1546<\/td>\n11.6 RNG-RSP management message encodings <\/td>\n<\/tr>\n
1551<\/td>\n11.6.1 CID list <\/td>\n<\/tr>\n
1552<\/td>\n11.7 REG-REQ\/RSP management message encodings <\/td>\n<\/tr>\n
1553<\/td>\n11.7.1 ARQ Parameters
11.7.2 SS management support
11.7.3 IP management mode <\/td>\n<\/tr>\n
1554<\/td>\n11.7.4 IP version
11.7.5 Secondary Management CID
11.7.6 Number of CIDs supported
11.7.6.1 Number of Uplink Transport CIDs Supported field
11.7.6.2 Number of Downlink Transport CIDs Supported field <\/td>\n<\/tr>\n
1555<\/td>\n11.7.7 CS capabilities
11.7.7.1 CS Type support <\/td>\n<\/tr>\n
1556<\/td>\n11.7.7.2 Maximum number of classification rules
11.7.7.3 PHS support
11.7.7.4 ROHC support
11.7.8 SS capabilities encodings
11.7.8.1 ARQ Support <\/td>\n<\/tr>\n
1557<\/td>\n11.7.8.2 DSx flow control
11.7.8.3 MCA flow control
11.7.8.4 Multicast polling group CID support
11.7.8.5 Maximum MAC data per frame support <\/td>\n<\/tr>\n
1558<\/td>\n11.7.8.5.1 Maximum amount of MAC level data per DL frame
11.7.8.5.2 Maximum amount of MAC level data per UL frame
11.7.8.6 Packing support
11.7.8.7 MAC Extended rtPS support <\/td>\n<\/tr>\n
1559<\/td>\n11.7.8.8 Maximum number of bursts transmitted concurrently to the MS
11.7.8.9 Co-located coexistence capability supported
11.7.8.10 H-FDD sleep capabilities <\/td>\n<\/tr>\n
1560<\/td>\n11.7.8.11 Extended capability
11.7.9 CID Update Encodings field <\/td>\n<\/tr>\n
1561<\/td>\n11.7.9.1 Compressed CID Update Encodings field
11.7.10 Method for allocating IP address for the secondary management connection <\/td>\n<\/tr>\n
1562<\/td>\n11.7.11 Reserved
11.7.12 HO Support
11.7.12.1 System Resource_Retain_Time
11.7.12.2 HO Process Optimization MS Timer
11.7.12.3 MS Handover Retransmission Timer <\/td>\n<\/tr>\n
1563<\/td>\n11.7.12.4 HO parameters processing time
11.7.12.5 Handover Supported field
11.7.12.6 Handover indication readiness timer <\/td>\n<\/tr>\n
1564<\/td>\n11.7.12.7 BS switching timer
11.7.13 Mobility parameters support
11.7.13.1 Mobility features supported <\/td>\n<\/tr>\n
1565<\/td>\n11.7.13.2 Power saving class capability
11.7.14 Sleep mode recovery time
11.7.15 MS-PREV-IP-ADDR
11.7.16 SKIP-ADDR-ACQUISITION <\/td>\n<\/tr>\n
1566<\/td>\n11.7.17 SAID Update Encodings field
11.7.18 Total number of provisioned service flow
11.7.19 Idle mode
11.7.19.1 Idle mode timeout
11.7.20 ARQ-ACK Type <\/td>\n<\/tr>\n
1567<\/td>\n11.7.21 MAC header and extended subheader support <\/td>\n<\/tr>\n
1568<\/td>\n11.7.22 SN Reporting Base
11.7.23 MS periodic ranging timer information
11.7.24 MBS capabilities
11.7.25 MR-BS and RS MAC feature support <\/td>\n<\/tr>\n
1569<\/td>\n11.7.25.1 RS MAC feature support <\/td>\n<\/tr>\n
1570<\/td>\n11.7.25.2 MR MAC header and extended subheader support
11.8 SBC-REQ\/RSP management message encodings <\/td>\n<\/tr>\n
1572<\/td>\n11.8.1 Bandwidth Allocation Support
11.8.2 Capabilities for Construction and Transmission of MAC PDUs
11.8.3 Physical Parameters Supported
11.8.3.1 Subscriber transition gaps
11.8.3.2 Maximum Tx power <\/td>\n<\/tr>\n
1573<\/td>\n11.8.3.3 WirelessMAN-SC specific parameters
11.8.3.3.1 SC SS demodulator types
11.8.3.3.2 SC SS modulator types
11.8.3.3.3 SC SS Downlink FEC Types field <\/td>\n<\/tr>\n
1574<\/td>\n11.8.3.3.4 SC SS Uplink FEC Types field
11.8.3.4 WirelessMAN-OFDM specific parameters
11.8.3.4.1 OFDM SS FFT sizes
11.8.3.4.2 OFDM SS demodulator <\/td>\n<\/tr>\n
1575<\/td>\n11.8.3.4.3 OFDM SS modulator
11.8.3.4.4 OFDM SS TC sublayer support
11.8.3.4.5 OFDM private map support <\/td>\n<\/tr>\n
1576<\/td>\n11.8.3.4.6 OFDM SS UL power control support
11.8.3.5 WirelessMAN-OFDMA specific parameters
11.8.3.5.1 OFDMA MS FFT sizes
11.8.3.5.2 OFDMA SS demodulator <\/td>\n<\/tr>\n
1577<\/td>\n11.8.3.5.3 OFDMA SS modulator <\/td>\n<\/tr>\n
1578<\/td>\n11.8.3.5.4 OFDMA SS permutation support
11.8.3.5.5 OFDMA SS demodulator for MIMO support <\/td>\n<\/tr>\n
1579<\/td>\n11.8.3.5.6 OFDMA AAS private map support <\/td>\n<\/tr>\n
1580<\/td>\n11.8.3.5.7 OFDMA AAS capabilities <\/td>\n<\/tr>\n
1581<\/td>\n11.8.3.5.8 OFDMA SS CINR measurement capability
11.8.3.5.9 OFDMA SS UL power control support
11.8.3.5.10 OFDMA MAP capability <\/td>\n<\/tr>\n
1582<\/td>\n11.8.3.5.11 UL control channel support
11.8.3.5.12 OFDMA MS CSIT capability <\/td>\n<\/tr>\n
1583<\/td>\n11.8.3.5.13 Maximum number of bursts per frame capability in HARQ
11.8.3.5.14 OFDMA SS modulator for MIMO support
11.8.3.5.15 SDMA Pilot capability <\/td>\n<\/tr>\n
1584<\/td>\n11.8.3.5.16 OFDMA multiple DL burst profile capability
11.8.3.5.17 HARQ buffer capability <\/td>\n<\/tr>\n
1585<\/td>\n11.8.3.5.17.1 HARQ incremental redundancy buffer capability
11.8.3.5.17.2 HARQ Chase combining and CC-IR buffer capability
11.8.3.5.18 OFDMA parameters sets <\/td>\n<\/tr>\n
1591<\/td>\n11.8.3.5.19 Extended OFDMA SS CINR measurement capability <\/td>\n<\/tr>\n
1592<\/td>\n11.8.3.5.20 RS maximum downlink transmit power
11.8.3.5.21 MR PHY feature support
11.8.3.5.22 OFDMA RS MIMO relay uplink support <\/td>\n<\/tr>\n
1593<\/td>\n11.8.3.5.23 OFDMA RS downlink STC encoding support
11.8.3.5.24 Supported second RS carrier configurations <\/td>\n<\/tr>\n
1596<\/td>\n11.8.3.5.25 Direct Relay Zone for RS
11.8.3.5.26 MR-cell carrier configuration
11.8.3.5.27 RSRTG <\/td>\n<\/tr>\n
1597<\/td>\n11.8.3.5.28 RSTTG
11.8.4 Security negotiation parameters
11.8.4.1 PKM version support <\/td>\n<\/tr>\n
1598<\/td>\n11.8.4.2 Authorization policy support <\/td>\n<\/tr>\n
1599<\/td>\n11.8.4.3 MAC (message authentication code) mode <\/td>\n<\/tr>\n
1600<\/td>\n11.8.4.4 PN window size
11.8.4.5 PKM flow control
11.8.4.6 Maximum number of supported security associations
11.8.5 Extended subheader capability <\/td>\n<\/tr>\n
1601<\/td>\n11.8.6 HO trigger metric support
11.8.7 Association type support
11.8.9 Service Information Query (SIQ) <\/td>\n<\/tr>\n
1602<\/td>\n11.8.10 MIH Capability Supported
11.8.11 Visited NSP ID <\/td>\n<\/tr>\n
1603<\/td>\n11.8.12 Auth Type for Single EAP
11.8.13 Visited NSP Realm
11.8.14 SII-ADV Message Pointer <\/td>\n<\/tr>\n
1604<\/td>\n11.8.15 SDU MTU capability
11.8.16 DL Coordinated Zone capability
11.8.17 Relay data early arrival report threshold <\/td>\n<\/tr>\n
1605<\/td>\n11.8.18 RS downlink processing delay
11.8.19 Minimum RS forwarding delay in direct relay zone TLV
11.8.20 Minimum RS forwarding delay TLV <\/td>\n<\/tr>\n
1606<\/td>\n11.8.21 Station information
11.8.22 Coexistence parameters supported
11.8.22.1 WirelessMAN-CX feature support
11.8.22.2 WirelessMAN-UCP feature support <\/td>\n<\/tr>\n
1607<\/td>\n11.9 PKM-REQ\/RSP management message encodings <\/td>\n<\/tr>\n
1609<\/td>\n11.9.1 Display string
11.9.2 AUTH-Key
11.9.3 TEK <\/td>\n<\/tr>\n
1610<\/td>\n11.9.4 Key lifetime
11.9.5 Key sequence number <\/td>\n<\/tr>\n
1611<\/td>\n11.9.6 HMAC Digest
11.9.6.1 Short-HMAC Digest
11.9.7 SAID
11.9.8 TEK parameters <\/td>\n<\/tr>\n
1612<\/td>\n11.9.9 CBC-IV attribute
11.9.10 Error code <\/td>\n<\/tr>\n
1613<\/td>\n11.9.11 CA certificate <\/td>\n<\/tr>\n
1614<\/td>\n11.9.12 SS certificate
11.9.13 Security capabilities
11.9.14 Cryptographic suite <\/td>\n<\/tr>\n
1616<\/td>\n11.9.15 Cryptographic-Suite-List parameter
11.9.16 SA-Descriptor attributer <\/td>\n<\/tr>\n
1617<\/td>\n11.9.17 SA-Type attribute
11.9.18 PKM Configuration Settings field
11.9.18.1 Authorize Wait Timeout field <\/td>\n<\/tr>\n
1618<\/td>\n11.9.18.2 Reauthorize Wait Timeout field
11.9.18.3 Authorization Grace Time field
11.9.18.4 Operational Wait Timeout field
11.9.18.5 Rekey Wait Timeout field
11.9.18.6 TEK Grace Time field <\/td>\n<\/tr>\n
1619<\/td>\n11.9.18.7 Authorize Reject Wait Timeout field
11.9.19 Nonce attribute
11.9.20 SS_RANDOM attribute
11.9.21 BS_RANDOM attribute <\/td>\n<\/tr>\n
1620<\/td>\n11.9.22 Encrypted Pre-PAK attribute
11.9.23 BS-Certificate attribute
11.9.24 SigBS attribute
11.9.25 MS-MAC Address attribute <\/td>\n<\/tr>\n
1621<\/td>\n11.9.26 CMAC Digest attribute
11.9.27 Key push modes <\/td>\n<\/tr>\n
1622<\/td>\n11.9.28 Key push counter
11.9.29 GKEK <\/td>\n<\/tr>\n
1623<\/td>\n11.9.30 SigSS
11.9.31 Authorization key identifier (AKID)
11.9.32 EAP payload
11.9.33 Auth result code <\/td>\n<\/tr>\n
1624<\/td>\n11.9.34 SA service type
11.9.35 Frame number
11.9.36 Associated GKEK Sequence Number
11.9.37 GKEK-Parameters <\/td>\n<\/tr>\n
1625<\/td>\n11.9.38 MIH Cycle
11.9.39 MIH Delivery Method and Status Code <\/td>\n<\/tr>\n
1626<\/td>\n11.9.40 AK-Parameters
11.9.41 SZK-Parameters
11.9.42 SZKEK-Parameters <\/td>\n<\/tr>\n
1627<\/td>\n11.10 MCA-REQ management message encodings <\/td>\n<\/tr>\n
1628<\/td>\n11.11 REP-REQ management message encodings <\/td>\n<\/tr>\n
1632<\/td>\n11.12 REP-RSP management message encodings <\/td>\n<\/tr>\n
1640<\/td>\n11.13 Service flow management encodings <\/td>\n<\/tr>\n
1642<\/td>\n11.13.1 SFID <\/td>\n<\/tr>\n
1643<\/td>\n11.13.2 CID
11.13.3 Service Class Name
11.13.4 QoS parameter set type <\/td>\n<\/tr>\n
1645<\/td>\n11.13.5 Traffic Priority parameter
11.13.6 Maximum Sustained Traffic Rate parameter
11.13.7 Maximum Traffic Burst parameter <\/td>\n<\/tr>\n
1646<\/td>\n11.13.8 Minimum Reserved Traffic Rate parameter
11.13.9 Vendor-specific QoS parameters
11.13.10 UL Grant Scheduling Type parameter <\/td>\n<\/tr>\n
1647<\/td>\n11.13.11 Request\/Transmission Policy parameter
11.13.12 Tolerated Jitter parameter <\/td>\n<\/tr>\n
1648<\/td>\n11.13.13 Maximum Latency parameter
11.13.14 Fixed-Length Versus Variable-Length SDU Indicator parameter
11.13.15 SDU Size parameter
11.13.16 Target SAID parameter <\/td>\n<\/tr>\n
1649<\/td>\n11.13.17 ARQ TLVs for ARQ-enabled connections
11.13.17.1 ARQ Enable TLV
11.13.17.2 ARQ_WINDOW_SIZE TLV
11.13.17.3 ARQ_RETRY_TIMEOUT TLV <\/td>\n<\/tr>\n
1650<\/td>\n11.13.17.4 ARQ_BLOCK_LIFETIME TLV
11.13.17.5 ARQ_SYNC_LOSS_TIMEOUT TLV
11.13.17.6 ARQ_DELIVER_IN_ORDER TLV <\/td>\n<\/tr>\n
1651<\/td>\n11.13.17.7 ARQ_RX_PURGE_TIMEOUT TLV
11.13.17.8 ARQ_BLOCK_SIZE TLV <\/td>\n<\/tr>\n
1652<\/td>\n11.13.17.9 RECEIVER_ARQ_ACK_PROCESSING_TIME TLV
11.13.18 CS-specific service flow encodings
11.13.18.1 CS Specification parameter <\/td>\n<\/tr>\n
1653<\/td>\n11.13.18.2 CS parameter encoding rules
11.13.18.3 Packet CS encodings for configuration and MAC messaging
11.13.18.3.1 QoS-related encodings <\/td>\n<\/tr>\n
1654<\/td>\n11.13.18.3.2 Classifier DSC Action
11.13.18.3.3 Packet Classification Rule parameter
11.13.18.3.3.1 Classification Rule Priority field
11.13.18.3.3.2 Reserved <\/td>\n<\/tr>\n
1655<\/td>\n11.13.18.3.3.3 Protocol field
11.13.18.3.3.4 IP Masked Source Address parameter
11.13.18.3.3.5 IP Masked Destination Address parameter
11.13.18.3.3.6 Protocol Source Port Range field <\/td>\n<\/tr>\n
1656<\/td>\n11.13.18.3.3.7 Protocol Destination Port Range field
11.13.18.3.3.8 IEEE 802.3\/Ethernet Destination MAC Address parameter
11.13.18.3.3.9 IEEE 802.3\/Ethernet Source MAC Address parameter
11.13.18.3.3.10 Ethertype\/IEEE 802.2 SAP <\/td>\n<\/tr>\n
1657<\/td>\n11.13.18.3.3.11 IEEE 802.1D User Priority field
11.13.18.3.3.12 IEEE 802.1Q VLAN ID field <\/td>\n<\/tr>\n
1658<\/td>\n11.13.18.3.3.13 Associated PHSI field
11.13.18.3.3.14 Packet Classification Rule Index field
11.13.18.3.3.15 Vendor-specific classification parameters
11.13.18.3.3.16 IPv6 Flow Label field
11.13.18.3.3.17 Classification Action Rule <\/td>\n<\/tr>\n
1659<\/td>\n11.13.18.3.3.18 IP Type of Service
11.13.18.3.4 PHS DSC Action field <\/td>\n<\/tr>\n
1660<\/td>\n11.13.18.3.5 PHS Rule field
11.13.18.3.5.1 PHSI field
11.13.18.3.5.2 PHSF field
11.13.18.3.5.3 PHSM field <\/td>\n<\/tr>\n
1661<\/td>\n11.13.18.3.5.4 PHSS field
11.13.18.3.5.5 PHSV field
11.13.18.3.5.6 Vendor-specific PHS parameters <\/td>\n<\/tr>\n
1662<\/td>\n11.13.18.4 ATM CS encodings for configuration and MAC messaging
11.13.18.4.1 ATM Switching Encoding field
11.13.18.4.2 ATM Classifier TLV field <\/td>\n<\/tr>\n
1663<\/td>\n11.13.18.4.2.1 VPI Classifier field
11.13.18.4.2.2 VCI Classification field
11.13.18.4.2.3 ATM Classifier ID field
11.13.18.4.3 ATM Classifier DSC Action field <\/td>\n<\/tr>\n
1664<\/td>\n11.13.18.5 GPCS CS encodings for configuration and MAC messaging
11.13.18.5.1 GPCS PROTOCOL_TYPE encoding
11.13.19 Unsolicited Grant Interval parameter <\/td>\n<\/tr>\n
1665<\/td>\n11.13.20 Unsolicited Polling Interval parameter
11.13.21 FSN size TLV
11.13.22 MBS service TLV <\/td>\n<\/tr>\n
1666<\/td>\n11.13.23 Global Service Class Name field
11.13.24 Type of Data Delivery Services parameter
11.13.25 SDU Inter-Arrival Interval parameter <\/td>\n<\/tr>\n
1667<\/td>\n11.13.26 Time Base parameter
11.13.27 MBS Zone Identifier Assignment parameter
11.13.28 Paging Preference parameter
11.13.29 SN Feedback Enabled field <\/td>\n<\/tr>\n
1668<\/td>\n11.13.30 HARQ Service Flows field
11.13.31 .CID Allocation for Active BSs field
11.13.32 Authorization Token field <\/td>\n<\/tr>\n
1669<\/td>\n11.13.33 HARQ Channel Mapping TLV
11.13.34 PDU SN Extended Subheader for HARQ Reordering TLV <\/td>\n<\/tr>\n
1670<\/td>\n11.13.35 MBS contents IDs
11.13.36 ROHC Parameter <\/td>\n<\/tr>\n
1671<\/td>\n11.13.36.1 ROHC Max Context ID
11.13.36.2 Large Context IDs
11.13.36.3 ROHC Profiles
11.13.36.4 ROHC Feedback Channel <\/td>\n<\/tr>\n
1672<\/td>\n11.13.36.5 ROHC MRRU
11.13.37 Packet Error Rate (PER) <\/td>\n<\/tr>\n
1673<\/td>\n11.13.38 PSC assignment
11.13.39 Group parameter Create\/Change TLV <\/td>\n<\/tr>\n
1675<\/td>\n11.13.40 Aggregated HARQ channels TLV
11.13.41 Priority indication
11.13.42 Regional Emergency Indication parameter <\/td>\n<\/tr>\n
1676<\/td>\n11.13.43 Per-RS QoS
11.13.44 CIDs added into tunnel TLV <\/td>\n<\/tr>\n
1677<\/td>\n11.13.45 CIDs removed from tunnel TLV <\/td>\n<\/tr>\n
1678<\/td>\n11.14 DREG-CMD\/REQ message encodings <\/td>\n<\/tr>\n
1679<\/td>\n11.15 HO management encodings
11.15.1 Resource_Retain_Time
11.15.2 Alternate Target BS
11.15.3 Additional Action Time <\/td>\n<\/tr>\n
1680<\/td>\n11.15.4 Preamble index
11.15.5 Requested Neighbor ABS Information
11.15.6 Neighbor ABS Information <\/td>\n<\/tr>\n
1681<\/td>\n11.15.7 Target ABS
11.16 Sleep mode management encodings
11.16.1 Co-located-coexistence-enabled <\/td>\n<\/tr>\n
1682<\/td>\n11.16.2 Sleep mode functions enabled in H-FDD
11.16.3 Sleep mode functions enabled in full FDD
11.17 MOB_PAG-ADV management message encodings
11.17.1 CDMA code and transmission opportunity assignment <\/td>\n<\/tr>\n
1683<\/td>\n11.17.2 Page-Response window
11.17.3 RS transmit frame number
11.17.4 Paging interval <\/td>\n<\/tr>\n
1684<\/td>\n11.18 MOB_NBR-ADV management message encodings
11.18.1 MOB_NBR-ADV message encodings <\/td>\n<\/tr>\n
1686<\/td>\n11.18.2 PHY mode ID <\/td>\n<\/tr>\n
1688<\/td>\n11.19 MOB_SCN-REP message encodings
11.19.1 Ranging_Parameters_Validity_Time
11.19.2 Recommended Neighbor ABS Information for SCN-REP
11.20 MOB_SCN-REQ\/RSP message encodings
11.20.1 Recommended start frame <\/td>\n<\/tr>\n
1689<\/td>\n11.20.2 Sleep mode reactivation information
11.20.3 Recommended Neighbor ABS Information for Scanning
11.21 LBS-ADV message encodings <\/td>\n<\/tr>\n
1690<\/td>\n11.21.1 Absolute Position TLV (Long Format) <\/td>\n<\/tr>\n
1691<\/td>\n11.21.2 Absolute Position TLV (Short Format)
11.21.3 Relative Position TLV <\/td>\n<\/tr>\n
1692<\/td>\n11.21.4 GPS Time TLV <\/td>\n<\/tr>\n
1693<\/td>\n11.21.5 Frequency Accuracy TLV
11.22 RS_NBR_MEAS-REP message encoding
11.22.1 Preamble index with least signal strength
11.23 MR_NBR-INFO management message encoding <\/td>\n<\/tr>\n
1694<\/td>\n11.24 R-link channel descriptor (RCD) TLV encoding
11.24.1 Generic channel description <\/td>\n<\/tr>\n
1695<\/td>\n11.24.2 Reserved preamble indexes for mobile relay station
11.24.3 Preamble reselection thresholds for mobile relay station <\/td>\n<\/tr>\n
1696<\/td>\n11.25 RS_Config-CMD message TLV encoding
11.25.1 Generic configuration <\/td>\n<\/tr>\n
1698<\/td>\n11.25.2 MBS configuration
11.25.3 Cooperative diversity configuration <\/td>\n<\/tr>\n
1699<\/td>\n11.25.4 Local CID allocation configuration
11.25.5 RS group configuration <\/td>\n<\/tr>\n
1700<\/td>\n11.25.5.1 Mode-1
11.25.5.2 Mode-2 <\/td>\n<\/tr>\n
1701<\/td>\n11.25.6 RS paging group
11.25.7 Frame configuration mode
11.25.8 R-amble transmission and monitoring configuration
11.25.8.1 MR-BS centralized control mode <\/td>\n<\/tr>\n
1702<\/td>\n11.25.8.2 RS autonomous control mode <\/td>\n<\/tr>\n
1704<\/td>\n11.25.8.3 R-amble measurement report
11.25.9 Multiple frame structure configurations <\/td>\n<\/tr>\n
1707<\/td>\n11.25.10 Direct relay zone configuration <\/td>\n<\/tr>\n
1708<\/td>\n11.25.11 RS UL access link configuration <\/td>\n<\/tr>\n
1709<\/td>\n11.25.12 Non-transparent RS operating in centralized scheduling mode
11.25.13 STR RS configuration <\/td>\n<\/tr>\n
1710<\/td>\n11.26 MS_Context-REQ\/RSP management message encodings <\/td>\n<\/tr>\n
1711<\/td>\n11.27 Location information request and response (MR_LOC-REQ\/RSP) messages encodings
11.27.1 The position of the RS
11.27.2 Positions of neighbor stations <\/td>\n<\/tr>\n
1712<\/td>\n11.27.3 Report period
11.27.4 BSIDs of neighbor stations <\/td>\n<\/tr>\n
1713<\/td>\n11.28 CX-CSI-MNTR-CFG message encodings
11.29 CX-CSI-MNTR-REP message encodings <\/td>\n<\/tr>\n
1715<\/td>\n11.30 CX intersystem communication encodings <\/td>\n<\/tr>\n
1723<\/td>\n11.31 BS_NURBC TLV encoding <\/td>\n<\/tr>\n
1727<\/td>\n12. System profiles
12.1 WirelessMAN-SC Release 1.0
12.1.1 WirelessMAN-SC MAC system profiles
12.1.1.1 Basic ATM MAC system profile <\/td>\n<\/tr>\n
1728<\/td>\n12.1.1.2 Basic Packet MAC system profile
12.1.1.3 Conventions for MAC management messages for profiles profM1 and profM2
12.1.1.4 MAC management message parameter transmission order
12.1.1.4.1 DCD
12.1.1.4.2 DL-MAP <\/td>\n<\/tr>\n
1729<\/td>\n12.1.1.4.3 UCD
12.1.1.4.4 UL-MAP
12.1.1.4.5 RNG-REQ
12.1.1.4.6 RNG-RSP
12.1.1.4.7 REG-REQ
12.1.1.4.8 REG-RSP <\/td>\n<\/tr>\n
1730<\/td>\n12.1.1.4.9 PKM-REQ: Auth Info
12.1.1.4.10 PKM-REQ: Auth Request
12.1.1.4.11 PKM-REQ: Key Request
12.1.1.4.12 PKM-RSP: SA Add
12.1.1.4.13 PKM-RSP: Auth Reply
12.1.1.4.14 PKM-RSP: Auth Reject <\/td>\n<\/tr>\n
1731<\/td>\n12.1.1.4.15 PKM-RSP: Key Reply
12.1.1.4.16 PKM-RSP: Key Reject
12.1.1.4.17 PKM-RSP: Auth Invalid
12.1.1.4.18 PKM-RSP: TEK Invalid
12.1.1.4.19 DSA-REQ: BS Initiated Service Addition <\/td>\n<\/tr>\n
1732<\/td>\n12.1.1.4.20 DSA-RSP: BS-initiated service addition
12.1.1.4.21 DSA-ACK
12.1.1.4.22 DSC-REQ: BS-initiated service change <\/td>\n<\/tr>\n
1733<\/td>\n12.1.1.4.23 DSC-RSP: BS-initiated service change
12.1.1.4.24 DSC-ACK
12.1.1.4.25 DSD-REQ
12.1.1.4.26 DSD-RSP
12.1.1.4.27 MCA-REQ
12.1.1.4.28 MCA-RSP
12.1.1.4.29 DBPC-REQ
12.1.1.4.30 DBPC-RSP
12.1.1.4.31 RES-CMD
12.1.1.4.32 SBC-REQ
12.1.1.4.33 SBC-RSP <\/td>\n<\/tr>\n
1734<\/td>\n12.1.1.4.34 CLK-CMP
12.1.1.4.35 DREG-CMD
12.1.1.4.36 DSX-RVD
12.1.1.4.37 TFTP-CPLT
12.1.1.4.38 TFTP-RSP
12.1.1.5 Message parameters specific to profM1
12.1.1.5.1 ATM CS Parameters for DSA-REQ: BS Initiated
12.1.1.5.2 ATM CS Parameters for DSA-RSP: BS Initiated
12.1.1.5.3 ATM CS Parameters for DSC-REQ: BS Initiated
12.1.1.5.4 ATM CS Parameters for DSC-RSP: BS Initiated <\/td>\n<\/tr>\n
1735<\/td>\n12.1.1.6 Message parameters specific to profM2
12.1.1.6.1 Packet CS parameters for DSA-REQ: BS-initiated
12.1.1.6.2 Packet CS parameters for DSA-RSP: BS-initiated
12.1.1.6.3 Packet CS Parameters for DSC-REQ: BS Initiated <\/td>\n<\/tr>\n
1736<\/td>\n12.1.1.6.4 Packet CS Parameters for DSC-RSP: BS Initiated
12.1.2 WirelessMAN-SC PHY Profiles
12.1.2.1 WirelessMAN-SC 25 MHz Channel PHY Profile <\/td>\n<\/tr>\n
1741<\/td>\n12.1.2.1.1 FDD Specific WirelessMAN-SC 25 MHz Channel PHY Profile features
12.1.2.1.2 TDD Specific WirelessMAN-SC 25 MHz Channel PHY Profile features
12.1.2.2 WirelessMAN-SC 28 MHz Channel PHY Profile <\/td>\n<\/tr>\n
1746<\/td>\n12.1.2.2.1 FDD Specific WirelessMAN-SC 28 MHz Channel PHY Profile features
12.1.2.2.2 TDD Specific WirelessMAN-SC 28 MHz Channel PHY Profile features
12.1.2.3 Conventions for MAC Management messages for profiles profP1 and profP2
12.1.2.4 UCD and DCD parameter transmission order for profP1 and profP2
12.1.2.4.1 DCD
12.1.2.4.2 UCD <\/td>\n<\/tr>\n
1747<\/td>\n12.1.2.5 Initial Ranging IE usage for profP1 and profP2
12.2 Reserved
12.3 Fixed WirelessMan-OFDM <\/td>\n<\/tr>\n
1748<\/td>\n12.3.1 WirelessMAN-OFDM and WirelessHUMAN(-OFDM) MAC profiles
12.3.1.1 ProfM3_PMP: Basic Packet PMP MAC System profile <\/td>\n<\/tr>\n
1749<\/td>\n12.3.1.1.1 Conventions for MAC Management messages <\/td>\n<\/tr>\n
1750<\/td>\n12.3.1.1.2 MAC Management Message Parameter Transmission Order
12.3.1.2 Reserved
12.3.2 WirelessMAN-OFDM and WirelessHUMAN(-OFDM) PHY profiles <\/td>\n<\/tr>\n
1751<\/td>\n12.3.2.1 ProfP3_1.75: WirelessMAN-OFDM PHY profile for 1.75MHz channelization <\/td>\n<\/tr>\n
1752<\/td>\n12.3.2.2 ProfP3_3.5: WirelessMAN-OFDM PHY profile for 3.5 MHz channelization <\/td>\n<\/tr>\n
1753<\/td>\n12.3.2.3 ProfP3_7: WirelessMAN-OFDM PHY profile for 7 MHz channelization
12.3.2.4 ProfP3_3: WirelessMAN-OFDM PHY profile for 3 MHz channelization
12.3.2.5 ProfP3_5.5: WirelessMAN-OFDM PHY profile for 5.5 MHz channelization <\/td>\n<\/tr>\n
1754<\/td>\n12.3.2.6 profP3_10: WirelessHUMAN(-OFDM) PHY profile for 10 MHz channelization <\/td>\n<\/tr>\n
1755<\/td>\n12.3.3 WirelessMAN-OFDM RF profiles
12.3.3.1 RF profiles for 10 MHz channelization
12.3.3.1.1 ProfR10_1
12.3.3.1.2 profR10_2
12.3.3.1.3 profR10_3 <\/td>\n<\/tr>\n
1756<\/td>\n12.4 Fixed WirelessMAN-OFDMA
12.4.1 WirelessMAN-OFDMA Power class profiles <\/td>\n<\/tr>\n
1757<\/td>\n12.4.2 WirelessMAN-OFDMA and WirelessHUMAN(-OFDMA) MAC profiles
12.4.2.1 Basic packet PMP MAC profile
12.4.2.1.1 Conventions for MAC management messages
12.4.2.1.2 MAC management message parameter transmission order
12.4.3 WirelessMAN-OFDMA and WirelessHUMAN(-OFDMA) system PHY profiles <\/td>\n<\/tr>\n
1758<\/td>\n12.4.3.1 Common features of PHY profiles
12.4.3.1.1 General implementation requirements
12.4.3.1.2 FDD-Specific PHY profiles features
12.4.3.1.3 TDD-Specific PHY profiles features
12.4.3.1.4 WirelessHUMAN PHY profiles features <\/td>\n<\/tr>\n
1759<\/td>\n12.4.3.1.5 Minimum performance requirements <\/td>\n<\/tr>\n
1760<\/td>\n12.4.3.2 WirelessMAN-OFDMA 1.25 MHz channel basic PHY profile <\/td>\n<\/tr>\n
1761<\/td>\n12.4.3.3 WirelessMAN-OFDMA 3.5 MHz channel basic PHY profile
12.4.3.4 WirelessMAN-OFDMA 7 MHz channel basic PHY profile <\/td>\n<\/tr>\n
1762<\/td>\n12.4.3.5 WirelessMAN-OFDMA 8.75 MHz channel basic PHY profile
12.4.3.6 WirelessMAN-OFDMA 14 MHz channel basic PHY profile <\/td>\n<\/tr>\n
1763<\/td>\n12.4.3.7 WirelessMAN-OFDMA 17.5 MHz channel basic PHY profile <\/td>\n<\/tr>\n
1764<\/td>\n12.4.3.8 WirelessMAN-OFDMA 28 MHz channel basic PHY profile
12.4.3.9 WirelessHUMAN(-OFDMA) 10 MHz channel basic PHY profile <\/td>\n<\/tr>\n
1765<\/td>\n12.4.3.10 WirelessHUMAN(-OFDMA) 20 MHz channel basic PHY profile
12.4.4 WirelessMAN-OFDMA RF profiles <\/td>\n<\/tr>\n
1767<\/td>\n12.5 WirelessMAN-OFDMA TDD Release 1
12.6 WirelessMAN-OFDMA TDD Release 1.5
12.7 WirelessMAN-OFDMA FDD Release 1.5
12.8 WirelessMAN-UCP and WirelessMAN-CX system profiles <\/td>\n<\/tr>\n
1768<\/td>\n12.8.1 Coexistence profiles for WirelessMAN-UCP system
12.8.1.1 profX_UC: Uncoordinated coexistence profile features <\/td>\n<\/tr>\n
1769<\/td>\n12.8.2 Coexistence profiles for WirelessMAN-CX system
12.8.2.1 profX_CC1: Coordinated coexistence profile 1 features <\/td>\n<\/tr>\n
1770<\/td>\n12.8.2.2 profX_CC2: Coordinated coexistence profile 2 features <\/td>\n<\/tr>\n
1771<\/td>\n12.8.2.3 profX_CC3: Coordinated coexistence profile 3 features <\/td>\n<\/tr>\n
1773<\/td>\n12.8.2.4 profX_CC4: Coordinated coexistence profile 4 features <\/td>\n<\/tr>\n
1774<\/td>\n12.8.2.5 profX_CC5: Coordinated coexistence profile 5 features <\/td>\n<\/tr>\n
1775<\/td>\n13. MIB Modules
13.1 Structure of MIB modules
13.1.1 wmanIfMib (Obsolete)
13.1.2 wmanDevMib
13.1.2.1 wmanDevBsObjects
13.1.2.1.1 wmanDevBsSoftwareUpgradeTable
13.1.2.1.2 wmanDevBsNotification <\/td>\n<\/tr>\n
1776<\/td>\n13.1.2.1.2.1 wmanDevBsTrapControl
13.1.2.1.2.2 wmanDevBsTrapDefinitions
13.1.2.2 wmanDevSsObjects
13.1.2.2.1 wmanDevSsConfigFileEncodingTable
13.1.2.2.2 wmanDevSsNotification
13.1.2.2.2.1 wmanDevSsTrapControl
13.1.2.2.2.2 wmanDevBsTrapDefinitions <\/td>\n<\/tr>\n
1777<\/td>\n13.1.2.3 wmanDevCommonObjects
13.1.2.3.1 wmanDevCmnEventLog
13.1.2.3.1.1 wmanDevCmnEventLogConfigTable
13.1.2.3.1.2 wmanDevCmnEventTable
13.1.2.3.1.3 wmanDevCmnEventLogTable <\/td>\n<\/tr>\n
1778<\/td>\n13.1.2.3.2 wmanDevCmnSnmpAgent
13.1.2.3.2.1 wmanDevCmnSnmpV1V2TrapDestTable
13.1.2.3.3 wmanDevCmnDeviceConfig
13.1.3 wmanIf2BsMib
13.1.3.1 wmanIf2BsFm <\/td>\n<\/tr>\n
1779<\/td>\n13.1.3.1.1 wmanIf2BsTrapControl
13.1.3.1.1.1 wmanIf2BsTrapControlRegister
13.1.3.1.1.2 wmanIf2BsStatusTrapControlRegister
13.1.3.1.1.3 wmanIf2BsThresholdConfigTable
13.1.3.1.2 wmanIf2BsTrapDefinitions
13.1.3.1.2.1 wmanIf2BsTrapPrefix
13.1.3.1.2.2 wmanIf2BsSsNotificationObjectsTable
13.1.3.2 wmanIf2BsCm
13.1.3.2.1 wmanIf2BsRegisteredSsTable <\/td>\n<\/tr>\n
1780<\/td>\n13.1.3.2.2 wmanIf2BsConfigurationTable
13.1.3.2.3 wmanIf2BsSsReqCapabilitiesTable
13.1.3.2.4 wmanIf2BsSsRspCapabilitiesTable
13.1.3.2.5 wmanIf2BsBasicCapabilitiesTable
13.1.3.2.6 wmanIf2BsCapabilitiesConfigTable
13.1.3.2.7 wmanIf2BsSsActionsTable
13.1.3.2.8 wmanIf2BsMulticastPollingTable
13.1.3.2.9 wmanIf2BsMbsContentTable
13.1.3.2.10 wmanIf2BsPhy <\/td>\n<\/tr>\n
1781<\/td>\n13.1.3.2.10.1 wmanIf2BsCmnPhy
13.1.3.2.10.2 wmanIf2BsOfdmPhy <\/td>\n<\/tr>\n
1782<\/td>\n13.1.3.2.10.3 wmanIf2BsOfdmaPhy
13.1.3.3 wmanIf2BsAm
13.1.3.3.1 wmanIf2BsOtaUsageDataRecordTable
13.1.3.4 wmanIf2BsPm <\/td>\n<\/tr>\n
1783<\/td>\n13.1.3.4.1 wmanIf2BsPmConfigurationTable
13.1.3.4.2 wmanIf2BsRssiCinrMetricsTable
13.1.3.4.3 wmanIf2BsStartupMetricsTable
13.1.3.4.4 wmanIf2BsThroughputMetricsTable
13.1.3.4.5 wmanIf2BsNetworkEntryMetricsTable
13.1.3.4.6 wmanIf2BsPacketErrorRateTable
13.1.3.4.7 wmanIf2BsHandoverMetricsTable <\/td>\n<\/tr>\n
1784<\/td>\n13.1.3.4.8 wmanIf2BsUserMetricsTable
13.1.3.4.9 wmanIf2BsCidMetricsTable
13.1.3.4.10 wmanIf2BsServiceFlowMetricsTable
13.1.3.4.11 wmanIf2BsArqHarqMetricsTable
13.1.3.4.12 wmanIf2BsAuthenticationMetricsTable
13.1.3.5 wmanIf2BsSm
13.1.3.5.1 wmanIf2BsPkmSecurityCapabilityTable <\/td>\n<\/tr>\n
1785<\/td>\n13.1.3.5.2 wmanIf2BsSsPkmSecurityCapabilityTable
13.1.3.5.3 wmanIf2BsPkmV1Objects
13.1.3.5.3.1 wmanIf2BsPkmV1ConfigTable
13.1.3.5.3.2 wmanIf2BsSsPkmV1AuthorizationTable
13.1.3.5.3.3 wmanIf2BsSsPkmV1TekTable
13.1.3.5.4 wmanIf2BsPkmV2Objects
13.1.3.5.4.1 wmanIf2BsPkmV2ConfigTable
13.1.3.5.4.2 wmanIf2BsSsPkmV2RsaAuthTable
13.1.3.5.4.3 wmanIf2BsSsPkmV2TekTable
13.1.3.5.4.4 wmanIf2BsSsPkmV23wayHandshakeTable
13.1.4 wmanIf2mBsMib <\/td>\n<\/tr>\n
1786<\/td>\n13.1.4.1 wmanIf2mBsCm
13.1.4.1.1 wmanIf2mBsConfiguration
13.1.4.1.1.1 wmanIf2mBsConfigurationTable
13.1.4.1.1.2 wmanIf2mBsSsReqCapabilitiesTable
13.1.4.1.1.3 wmanIf2mBsSsRspCapabilitiesTable <\/td>\n<\/tr>\n
1787<\/td>\n13.1.4.1.1.4 wmanIf2mBsBasicCapabilitiesTable
13.1.4.1.1.5 wmanIf2mBsCapabilitiesConfigTable
13.1.4.1.1.6 wmanIf2mBsSsCidUpdateTable
13.1.4.1.1.7 wmanIf2mBsNetworkServiceProviderTable
13.1.4.1.2 wmanIf2mBsPowerSavingMode
13.1.4.1.2.1 wmanIf2mBsSsPwrSaving2CidMapTable
13.1.4.1.2.2 wmanIf2mBsSsPowerSavingClassesTable
13.1.4.1.3 wmanIf2mBsNeighborAdv <\/td>\n<\/tr>\n
1788<\/td>\n13.1.4.1.3.1 wmanIf2mBsNeighborAdvCommonTable
13.1.4.1.3.2 wmanIf2mBsNeighborAdvertizementTable
13.1.4.1.3.3 wmanIf2mBsNeighborBsOfdmaUcdTable
13.1.4.1.3.4 wmanIf2mBsNeighborBsOfdmaDcdTable
13.1.4.1.3.5 wmanIf2mBsLbsAdvNeighborBsTable
13.1.4.1.4 wmanIf2mBsPaging <\/td>\n<\/tr>\n
1789<\/td>\n13.1.4.1.4.1 wmanIf2mBsPagingAdvertizementTable
13.1.4.1.4.2 wmanIf2mBsMsPagedTable
13.1.4.1.4.3 wmanIf2mBsPagingGroupsTable
13.1.4.1.5 wmanIf2mBsServiceFlow
13.1.4.1.5.1 wmanIf2mBsServiceFlowTable
13.1.4.1.5.2 wmanIf2mBsClassifierRuleTable
13.1.4.1.5.3 wmanIf2mBsPhsRuleTable <\/td>\n<\/tr>\n
1790<\/td>\n13.1.4.1.5.4 wmanIf2mBsQoSProfileTable
13.1.4.1.5.5 wmanIf2mBsArqAttributeTable
13.1.4.2 wmanIf2mBsPm
13.1.4.2.1 wmanIf2mBsSsSleepModeStatisticsTable
13.1.4.2.2 wmanIf2mBsMobileScanRequestTable
13.1.4.2.3 wmanIf2mBsMobileScanResponseTable
13.1.4.2.4 wmanIf2mBsNeighborBsInfoTable
13.1.4.2.5 wmanIf2mBsDiversityBsInfoTable <\/td>\n<\/tr>\n
1791<\/td>\n13.1.5 wmanIf2fBsMib
13.1.5.1 wmanIf2fBsProvServiceFlowTable
13.1.5.2 wmanIf2fBsProvServiceClassTable
13.1.5.3 wmanIf2fBsServiceFlowTable
13.1.5.4 wmanIf2fBsProvClassifierRuleTable
13.1.5.5 wmanIf2fBsProvPhsRuleTable
13.1.5.6 wmanIf2fBsClassifierRuleTable
13.1.5.7 wmanIf2fBsPhsRuleTable <\/td>\n<\/tr>\n
1792<\/td>\n13.1.6 wmanIf2SsMib
13.1.6.1 wmanIf2SsConfigurationTable
13.1.6.2 wmanIf2mSsConfigurationTable
13.1.6.3 wmanIf2SsTrapControl
13.1.6.3.1 wmanIf2SsTrapControlRegister
13.1.6.3.2 wmanIf2SsThresholdConfigTable
13.1.6.4 wmanIf2SsTrapDefinitions
13.1.6.4.1 wmanIf2SsTrapPrefix
13.1.6.4.2 wmanIf2SsNotificationObjectsTable
13.1.7 wmanIf2TcMib <\/td>\n<\/tr>\n
1793<\/td>\n13.2 ASN.1 Definitions of MIB Modules
13.2.1 wmanIfMib (Obsolete)
13.2.2 wmanDevMib <\/td>\n<\/tr>\n
1811<\/td>\n13.2.3 wmanIf2BsMib <\/td>\n<\/tr>\n
1995<\/td>\n13.2.4 wmanIf2mBsMib <\/td>\n<\/tr>\n
2106<\/td>\n13.2.5 wmanIf2fBsMib <\/td>\n<\/tr>\n
2148<\/td>\n13.2.6 wmanIf2SsMib <\/td>\n<\/tr>\n
2168<\/td>\n13.2.7 wmanIf2TcMib <\/td>\n<\/tr>\n
2189<\/td>\n14. Management interfaces and procedures
14.1 Service primitive template
14.1.1 Universal naming schema for SAP service primitive <\/td>\n<\/tr>\n
2190<\/td>\n14.1.2 SAP service primitive object format
14.1.2.1 M-SAP\/C-SAP operation service primitive <\/td>\n<\/tr>\n
2191<\/td>\n14.1.2.2 M-SAP\/C-SAP notification service primitive:
14.1.3 SAP service primitive flow diagram template <\/td>\n<\/tr>\n
2192<\/td>\n14.2 Management and control functions
14.2.1 Accounting management
14.2.1.1 Accounting procedure <\/td>\n<\/tr>\n
2194<\/td>\n14.2.1.2 Service primitives for accounting management
14.2.1.2.1 M-ACM-REQ
14.2.1.2.1.1 Function
14.2.1.2.1.2 Semantics of the service primitive
14.2.1.2.1.3 When generated
14.2.1.2.1.4 Effect of receipt
14.2.1.2.2 M-ACM-RSP
14.2.1.2.2.1 Function
14.2.1.2.2.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2195<\/td>\n14.2.1.2.2.3 When generated
14.2.1.2.2.4 Effect of receipt
14.2.1.2.3 M-ACM-IND
14.2.1.2.3.1 Function <\/td>\n<\/tr>\n
2196<\/td>\n14.2.1.2.3.2 Semantics of the service primitive
14.2.1.2.3.3 When generated
14.2.1.2.3.4 Effect of receipt
14.2.2 Security management
14.2.2.1 EAP-based authentication procedure <\/td>\n<\/tr>\n
2197<\/td>\n14.2.2.1.1 C-SM-IND
14.2.2.1.1.1 C-SM-IND (Event_Type = EAP_Start) <\/td>\n<\/tr>\n
2198<\/td>\n14.2.2.1.1.2 Reserved
14.2.2.1.1.3 C-SM-IND (Event_Type = AK Transfer) <\/td>\n<\/tr>\n
2199<\/td>\n14.2.2.1.1.4 C-SM-IND (Event_Type = EAP_Transfer) <\/td>\n<\/tr>\n
2200<\/td>\n14.2.2.1.1.5 Reserved
14.2.2.2 RSA-based authentication procedure <\/td>\n<\/tr>\n
2201<\/td>\n14.2.2.2.1 C-SM-IND
14.2.2.2.1.1 Function
14.2.2.2.1.2 Semantics of the service primitives <\/td>\n<\/tr>\n
2202<\/td>\n14.2.2.2.1.3 When generated
14.2.2.2.1.4 Effect of receipt
14.2.2.2.2 C-SM-REQ
14.2.2.2.2.1 Function
14.2.2.2.2.2 Semantics of the service primitives <\/td>\n<\/tr>\n
2203<\/td>\n14.2.2.2.2.3 When generated
14.2.2.2.2.4 Effect of receipt
14.2.2.2.3 C-SM-RSP
14.2.2.2.3.1 Function
14.2.2.2.3.2 Semantics of the service primitives <\/td>\n<\/tr>\n
2204<\/td>\n14.2.2.2.3.3 When generated
14.2.2.2.3.4 Effect of receipt
14.2.2.3 Security for handoffs (EAP only) <\/td>\n<\/tr>\n
2205<\/td>\n14.2.2.3.1 Service primitives
14.2.2.3.1.1 C-SM-REQ <\/td>\n<\/tr>\n
2206<\/td>\n14.2.2.3.1.2 C-SM-RSP <\/td>\n<\/tr>\n
2207<\/td>\n14.2.3 IP management with Secondary Management Connection <\/td>\n<\/tr>\n
2208<\/td>\n14.2.3.1 M-SMC-IND
14.2.3.1.1 M-SMC-IND (Event_Type = SMC-PAYLOAD)
14.2.3.1.1.1 Function
14.2.3.1.1.2 Semantics of the service primitives <\/td>\n<\/tr>\n
2209<\/td>\n14.2.3.1.1.3 When generated
14.2.3.1.1.4 Effect of receipt
14.2.3.1.2 M-SMC-IND(Event_Type = IP_ALLOCATION)
14.2.3.1.2.1 Function
14.2.3.1.2.2 Semantics of the service primitives <\/td>\n<\/tr>\n
2210<\/td>\n14.2.3.1.2.3 When generated
14.2.3.1.2.4 Effect of receipt
14.2.4 Subscriber mode management
14.2.4.1 Managing device states <\/td>\n<\/tr>\n
2212<\/td>\n14.2.4.2 Idle mode management primitives <\/td>\n<\/tr>\n
2214<\/td>\n14.2.4.2.1 C-IMM-REQ
14.2.4.2.1.1 C-IMM-REQ (Action_Type = Idle_Mode_Initiation) <\/td>\n<\/tr>\n
2215<\/td>\n14.2.4.2.1.2 C-IMM-REQ (Action_Type = Network_Re-Entry_from_Idle_Mode) <\/td>\n<\/tr>\n
2216<\/td>\n14.2.4.2.2 C-IMM-RSP <\/td>\n<\/tr>\n
2217<\/td>\n14.2.4.2.2.1 C-IMM-RSP (Action_Type = Idle_Mode_Initiation) <\/td>\n<\/tr>\n
2218<\/td>\n14.2.4.2.2.2 C-IMM-RSP (Action_Type = Network_Re-Entry_from_Idle_Mode) <\/td>\n<\/tr>\n
2219<\/td>\n14.2.4.2.3 C-IMM-ACK
14.2.4.2.3.1 Function
14.2.4.2.3.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2220<\/td>\n14.2.4.2.3.3 When generated
14.2.4.2.3.4 Effect of receipt
14.2.4.2.4 C-IMM-IND
14.2.4.2.4.1 Function
14.2.4.2.4.2 Semantics of the service primitive
14.2.4.2.4.3 When generated <\/td>\n<\/tr>\n
2221<\/td>\n14.2.4.2.4.4 Effect of receipt
14.2.4.3 Location update procedure <\/td>\n<\/tr>\n
2222<\/td>\n14.2.4.3.1 C-IMM-REQ
14.2.4.3.1.1 Function
14.2.4.3.1.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2223<\/td>\n14.2.4.3.1.3 When generated
14.2.4.3.1.4 Effect of receipt
14.2.4.3.2 C-IMM-RSP
14.2.4.3.2.1 Function
14.2.4.3.2.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2224<\/td>\n14.2.4.3.2.3 When generated
14.2.4.3.2.4 Effect of receipt <\/td>\n<\/tr>\n
2225<\/td>\n14.2.4.3.3 C-IMM-IND
14.2.4.3.3.1 Function
14.2.4.3.3.2 Semantics of the service primitive
14.2.4.3.3.3 When generated
14.2.4.3.3.4 Effect of receipt <\/td>\n<\/tr>\n
2226<\/td>\n14.2.5 Handover management
14.2.5.1 Handover context for connections
14.2.5.2 Handover control protocol procedures <\/td>\n<\/tr>\n
2231<\/td>\n14.2.5.2.1 C-HO-REQ
14.2.5.2.1.1 C-HO-REQ(Action_Type = HO-Serving) <\/td>\n<\/tr>\n
2233<\/td>\n14.2.5.2.1.2 C-HO-REQ(Action_Type = HO-Target) <\/td>\n<\/tr>\n
2234<\/td>\n14.2.5.2.1.3 C-HO-REQ(Action_Type = HO-Scan) <\/td>\n<\/tr>\n
2235<\/td>\n14.2.5.2.1.4 C-HO-REQ(Action_Type = HO-Mobile) <\/td>\n<\/tr>\n
2236<\/td>\n14.2.5.2.2 C-HO-RSP
14.2.5.2.2.1 C-HO-RSP(Action_Type = HO-Serving) <\/td>\n<\/tr>\n
2237<\/td>\n14.2.5.2.2.2 C-HO-RSP(Action_Type = HO-Target) <\/td>\n<\/tr>\n
2238<\/td>\n14.2.5.2.2.3 C-HO-RSP(Action_Type = HO-Scan) <\/td>\n<\/tr>\n
2240<\/td>\n14.2.5.2.2.4 C-HO-RSP(Action_Type = HO-Mobile) <\/td>\n<\/tr>\n
2241<\/td>\n14.2.5.2.3 C-HO-IND
14.2.5.2.3.1 C-HO-IND (Event_Type = HO-Start) <\/td>\n<\/tr>\n
2242<\/td>\n14.2.5.2.3.2 C-HO-IND (Event_Type = HO-Cancel) <\/td>\n<\/tr>\n
2243<\/td>\n14.2.5.2.3.3 C-HO-IND (Event_Type = HO-Scan) <\/td>\n<\/tr>\n
2244<\/td>\n14.2.5.2.3.4 C-HO-IND (Event_Type = HO-CMPLT) <\/td>\n<\/tr>\n
2245<\/td>\n14.2.5.3 MIH control protocol procedures <\/td>\n<\/tr>\n
2246<\/td>\n14.2.5.3.1 C-MIH-IND
14.2.5.3.1.1 Function
14.2.5.3.1.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2247<\/td>\n14.2.5.3.1.3 When generated
14.2.5.3.1.4 Effect of receipt
14.2.6 Radio resource management <\/td>\n<\/tr>\n
2249<\/td>\n14.2.6.1 C-RRM-REQ
14.2.6.1.1 C-RRM-REQ (Action_Type = Spare Capacity Report)
14.2.6.1.1.1 Function <\/td>\n<\/tr>\n
2250<\/td>\n14.2.6.1.2 C-RRM-REQ (Action_Type = PHY report)
14.2.6.1.2.1 Function
14.2.6.1.2.2 Semantics of the service primitive:
14.2.6.1.2.3 When generated
14.2.6.1.2.4 Effect of receipt <\/td>\n<\/tr>\n
2251<\/td>\n14.2.6.2 C-RRM-RSP
14.2.6.2.1 C-RRM-RSP(Action_Type = Spare Capacity Report)
14.2.6.2.1.1 Function
14.2.6.2.1.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2252<\/td>\n14.2.6.2.1.3 When generated
14.2.6.2.1.4 Effect of receipt
14.2.6.2.2 C-RRM-RSP(Action_Type = PHY Report)
14.2.6.2.2.1 Function
14.2.6.2.2.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2253<\/td>\n14.2.6.2.2.3 When generated
14.2.6.2.2.4 Effect of receipt
14.2.6.3 C-RRM-IND <\/td>\n<\/tr>\n
2254<\/td>\n14.2.6.3.1 C-RRM-IND (Event_Type = Spare Capacity Report)
14.2.6.3.1.1 Function
14.2.6.3.1.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2255<\/td>\n14.2.6.3.1.3 When generated
14.2.6.3.1.4 Effect of receipt
14.2.6.3.2 C-RRM-IND (Event_Type = Neighbor-BS Radio Resource Status Update)
14.2.6.3.2.1 Function
14.2.6.3.2.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2257<\/td>\n14.2.6.3.2.3 When generated
14.2.6.3.2.4 Effect of receipt
14.2.7 Network entry & exit management <\/td>\n<\/tr>\n
2261<\/td>\n14.2.7.1 C-NEM-REQ
14.2.7.1.1 C-NEM-REQ (Action_Type = Ranging)
14.2.7.1.1.1 SS side <\/td>\n<\/tr>\n
2262<\/td>\n14.2.7.1.1.2 BS side <\/td>\n<\/tr>\n
2263<\/td>\n14.2.7.1.2 C-NEM-REQ (Action_Type = SS Basic Capability)
14.2.7.1.2.1 Function
14.2.7.1.2.2 Semantics:
14.2.7.1.2.3 When generated
14.2.7.1.2.4 Effect of receipt
14.2.7.1.3 C-NEM-REQ (Action_Type = Registration)
14.2.7.1.3.1 SS side <\/td>\n<\/tr>\n
2264<\/td>\n14.2.7.1.3.2 BS side <\/td>\n<\/tr>\n
2265<\/td>\n14.2.7.1.4 C-NEM-REQ (Action_Type = Deregistration)
14.2.7.1.4.1 Function
14.2.7.1.4.2 Semantics: <\/td>\n<\/tr>\n
2266<\/td>\n14.2.7.1.4.3 When generated
14.2.7.1.4.4 Effect of receipt
14.2.7.2 C-NEM-RSP
14.2.7.2.1 C-NEM-RSP (Action_Type = Ranging)
14.2.7.2.1.1 BS side <\/td>\n<\/tr>\n
2267<\/td>\n14.2.7.2.1.2 SS side <\/td>\n<\/tr>\n
2268<\/td>\n14.2.7.2.2 C-NEM-RSP (Action_Type = SS Basic Capability)
14.2.7.2.2.1 Function
14.2.7.2.2.2 Semantics: <\/td>\n<\/tr>\n
2269<\/td>\n14.2.7.2.2.3 When generated
14.2.7.2.2.4 Effect of receipt
14.2.7.2.3 C-NEM-RSP (Action_Type = Registration)
14.2.7.2.3.1 BS side <\/td>\n<\/tr>\n
2270<\/td>\n14.2.7.2.3.2 SS side <\/td>\n<\/tr>\n
2271<\/td>\n14.2.7.2.4 C-NEM-RSP (Action_Type = Deregistration)
14.2.7.2.4.1 Function
14.2.7.2.4.2 Semantics:
14.2.7.2.4.3 When generated
14.2.7.2.4.4 Effect of receipt <\/td>\n<\/tr>\n
2272<\/td>\n14.2.7.3 C-NEM-IND (Event_Type = NBR_BS_Update)
14.2.7.3.1 Function
14.2.7.3.2 Semantics:
14.2.7.3.3 When generated <\/td>\n<\/tr>\n
2273<\/td>\n14.2.7.3.4 Effect of receipt
14.2.7.4 C-NEM-IND (Event_Type = network attached)
14.2.7.4.1 Function
14.2.7.4.2 Semantics of the service primitive:
14.2.7.4.3 When generated
14.2.7.4.4 Effect of receipt
14.2.8 Subscriber Station Management <\/td>\n<\/tr>\n
2276<\/td>\n14.2.8.1 M-SSM-REQ
14.2.8.1.1 M-SSM-REQ (Action_Type = Power On)
14.2.8.1.1.1 Function
14.2.8.1.1.2 Semantics of the service primitive:
14.2.8.1.1.3 When generated
14.2.8.1.1.4 Effect of receipt
14.2.8.1.2 M-SSM-REQ (Action_Type = Power Down)
14.2.8.1.2.1 Function <\/td>\n<\/tr>\n
2277<\/td>\n14.2.8.1.2.2 Semantics of the service primitive:
14.2.8.1.2.3 When generated
14.2.8.1.2.4 Effect of receipt
14.2.8.1.3 M-SSM-REQ (Action_Type = Reset)
14.2.8.1.3.1 Function
14.2.8.1.3.2 Semantics of the service primitive:
14.2.8.1.3.3 When generated
14.2.8.1.3.4 Effect of receipt <\/td>\n<\/tr>\n
2278<\/td>\n14.2.8.1.4 M-SSM-REQ (Action_Type = Hold)
14.2.8.1.4.1 Function
14.2.8.1.4.2 Semantics of the service primitive:
14.2.8.1.4.3 When generated
14.2.8.1.4.4 Effect of receipt
14.2.8.1.5 M-SSM-REQ (Action_Type = Normal)
14.2.8.1.5.1 Function
14.2.8.1.5.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2279<\/td>\n14.2.8.1.5.3 When generated
14.2.8.1.5.4 Effect of receipt
14.2.8.2 M-SSM-RSP
14.2.8.2.1 M-SSM- RSP (Action_Type = Power On)
14.2.8.2.1.1 Function
14.2.8.2.1.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2280<\/td>\n14.2.8.2.1.3 When generated
14.2.8.2.1.4 Effect of receipt
14.2.8.2.2 M-SSM- RSP (Action_Type = Power Down)
14.2.8.2.2.1 Function
14.2.8.2.2.2 Semantics of the service primitive:
14.2.8.2.2.3 When generated
14.2.8.2.2.4 Effect of receipt
14.2.8.2.3 M-SSM- RSP (Action_Type = Reset)
14.2.8.2.3.1 Function
14.2.8.2.3.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2281<\/td>\n14.2.8.2.3.3 When generated
14.2.8.2.3.4 Effect of receipt
14.2.8.2.4 M-SSM-RSP (Action_Type = Hold)
14.2.8.2.4.1 Function
14.2.8.2.4.2 Semantics of the service primitive:
14.2.8.2.4.3 When generated
14.2.8.2.4.4 Effect of receipt
14.2.8.2.5 M-SSM-RSP (Action_Type = Normal)
14.2.8.2.5.1 Function
14.2.8.2.5.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2282<\/td>\n14.2.8.2.5.3 When generated
14.2.8.2.5.4 Effect of receipt
14.2.8.3 M-SSM-IND
14.2.8.3.1 M-SSM-IND (Event_Type = Reset)
14.2.8.3.1.1 Function
14.2.8.3.1.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2283<\/td>\n14.2.8.3.1.3 When generated
14.2.8.3.1.4 Effect of receipt
14.2.8.3.2 M-SSM-IND (Event_Type = Hold)
14.2.8.3.2.1 Function
14.2.8.3.2.2 Semantics of the service primitive:
14.2.8.3.2.3 When generated
14.2.8.3.2.4 Effect of receipt
14.2.8.3.3 M-SSM-IND (Event_Type = Normal)
14.2.8.3.3.1 Function
14.2.8.3.3.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2284<\/td>\n14.2.8.3.3.3 When generated
14.2.8.3.3.4 Effect of receipt
14.2.9 QoS management <\/td>\n<\/tr>\n
2287<\/td>\n14.2.9.1 C-SFM-REQ
14.2.9.1.1 C-SFM-REQ (Operation_Type = Create)
14.2.9.1.1.1 Function
14.2.9.1.1.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2288<\/td>\n14.2.9.1.1.3 When generated
14.2.9.1.1.4 Effect of receipt
14.2.9.1.2 C-SFM-REQ (Operation_Type = Set)
14.2.9.1.2.1 Function
14.2.9.1.2.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2289<\/td>\n14.2.9.1.2.3 When generated
14.2.9.1.2.4 Effect of receipt
14.2.9.1.3 C-SFM-REQ (Operation_Type = Delete)
14.2.9.1.3.1 Function
14.2.9.1.3.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2290<\/td>\n14.2.9.1.3.3 When generated
14.2.9.1.3.4 Effect of receipt
14.2.9.2 C-SFM-RSP
14.2.9.2.1 C-SFM-RSP (Operation_Type = Create)
14.2.9.2.1.1 Function
14.2.9.2.1.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2291<\/td>\n14.2.9.2.1.3 When generated
14.2.9.2.1.4 Effect of receipt
14.2.9.2.2 C-SFM-RSP (Operation_Type = Set)
14.2.9.2.2.1 Function <\/td>\n<\/tr>\n
2292<\/td>\n14.2.9.2.2.2 Semantics of the service primitive:
14.2.9.2.2.3 When generated
14.2.9.2.2.4 Effect of receipt <\/td>\n<\/tr>\n
2293<\/td>\n14.2.9.2.3 C-SFM-RSP(Operation_Type = Delete)
14.2.9.2.3.1 Function
14.2.9.2.3.2 Semantics of the service primitive:
14.2.9.2.3.3 When generated
14.2.9.2.3.4 Effect of receipt
14.2.10 Multicast and Broadcast Service Management <\/td>\n<\/tr>\n
2294<\/td>\n14.2.10.1 MBS Capability Discovery
14.2.10.1.1 C-MBS-REQ (Operation_Type = Get)
14.2.10.1.1.1 Function
14.2.10.1.1.2 Semantics of this primitive
14.2.10.1.1.3 When generated
14.2.10.1.1.4 Effect of receipt <\/td>\n<\/tr>\n
2295<\/td>\n14.2.10.1.2 C-MBS-RSP (Operation_Type = Get)
14.2.10.1.2.1 Function
14.2.10.1.2.2 Semantics of this primitive
14.2.10.1.2.3 When generated
14.2.10.1.2.4 Effect of receipt
14.2.10.2 MBS Configuration Management Setting <\/td>\n<\/tr>\n
2296<\/td>\n14.2.10.2.1 C-MBS-REQ (Operation_Type = Set)
14.2.10.2.1.1 Function
14.2.10.2.1.2 Semantics of this primitive
14.2.10.2.1.3 When generated
14.2.10.2.1.4 Effect of receipt
14.2.10.2.2 C-MBS-RSP (Operation_Type = Set)
14.2.10.2.2.1 Function <\/td>\n<\/tr>\n
2297<\/td>\n14.2.10.2.2.2 Semantics of this primitive
14.2.10.2.2.3 When generated
14.2.10.2.2.4 Effect of receipt
14.2.10.3 MBS Configuration Management Layout <\/td>\n<\/tr>\n
2298<\/td>\n14.2.10.3.1 C-MBS-IND (MBS Portion Layout)
14.2.10.3.1.1 Function
14.2.10.3.1.2 Semantics of this primitive <\/td>\n<\/tr>\n
2300<\/td>\n14.2.10.3.1.3 When generated
14.2.10.3.1.4 Effect of receipt
14.2.10.3.2 C-MBS-REQ
14.2.10.3.2.1 C-MBS-REQ (Operation_Type = Create) <\/td>\n<\/tr>\n
2301<\/td>\n14.2.10.3.2.2 C-MBS-REQ (Operation_Type = Delete)
14.2.10.3.3 C-MBS-RSP
14.2.10.3.3.1 C-MBS-RSP (Operation_Type = Create) <\/td>\n<\/tr>\n
2302<\/td>\n14.2.10.3.3.2 C-MBS-RSP (Operation_Type = Delete) <\/td>\n<\/tr>\n
2303<\/td>\n14.2.11 LBS Management <\/td>\n<\/tr>\n
2304<\/td>\n14.2.11.1 C-LBS-REQ
14.2.11.1.1 Function
14.2.11.1.2 Semantics of the service primitive:
14.2.11.1.3 When generated
14.2.11.1.4 Effect of receipt
14.2.11.2 C-LBS-ACK
14.2.11.2.1 Function
14.2.11.2.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2305<\/td>\n14.2.11.2.3 When generated
14.2.11.2.4 Effect of receipt
14.2.11.3 C-LBS-RSP
14.2.11.3.1 Function
14.2.11.3.2 Semantics of the service primitive: <\/td>\n<\/tr>\n
2306<\/td>\n14.2.11.3.3 When generated
14.2.11.3.4 Effect of receipt <\/td>\n<\/tr>\n
2307<\/td>\n15. Mechanisms for coordinated coexistence
15.1 General <\/td>\n<\/tr>\n
2308<\/td>\n15.1.1 Overview
15.1.2 Components and relationships <\/td>\n<\/tr>\n
2311<\/td>\n15.1.3 Procedure in WirelessMAN-CX
15.1.3.1 Procedure flow for BS <\/td>\n<\/tr>\n
2312<\/td>\n15.1.3.2 Procedure flow for SS
15.1.3.2.1 Channel measurement in the operating stage
15.1.4 Basic and extended coordinated coexistence
15.1.4.1 Functionality for the basic and extended coordinated coexistence <\/td>\n<\/tr>\n
2313<\/td>\n15.1.4.2 Master allocation
15.1.4.3 Coexistence Control Channel <\/td>\n<\/tr>\n
2314<\/td>\n15.1.4.4 Coordinated operation for basic coexistence
15.1.5 Architecture for WirelessMAN-CX <\/td>\n<\/tr>\n
2315<\/td>\n15.2 Provisioning for WirelessMAN-CX
15.2.1 Synchronization of WirelessMAN-CX and WirelessMAN-UCP systems
15.2.1.1 Common clock <\/td>\n<\/tr>\n
2316<\/td>\n15.2.1.2 Network Time Interval and CX_MAC_NO Frame start
15.2.1.3 Granularity of the NTI
15.2.1.4 UTC standard time
15.2.1.5 UTC time stamp word
15.2.1.6 Transmit\/Receive synchronization <\/td>\n<\/tr>\n
2317<\/td>\n15.2.2 Same PHY profile
15.2.3 Additional ranging requirements for WirelessMAN-CX systems
15.3 Interference assessment and basic connectivity creation
15.3.1 Coexistence Control Channel <\/td>\n<\/tr>\n
2318<\/td>\n15.3.1.1 Basic principles <\/td>\n<\/tr>\n
2319<\/td>\n15.3.1.2 CXCC subchannel allocation
15.3.1.2.1 Subchannel 1
15.3.1.2.2 Subchannel 2 <\/td>\n<\/tr>\n
2320<\/td>\n15.3.1.2.3 Subchannel 3
15.3.1.2.4 Subchannel 4 <\/td>\n<\/tr>\n
2321<\/td>\n15.3.1.2.5 CSI subchannel
15.3.1.3 Operation of other WirelessMAN system variants during the CXCC
15.3.2 Candidate Channel and Master Frame Assessment (CCMFA) <\/td>\n<\/tr>\n
2322<\/td>\n15.3.3 CXCC subchannel 2
15.3.3.1 Coexistence messaging interval <\/td>\n<\/tr>\n
2324<\/td>\n15.3.3.2 Interference identification using Coexistence Messaging Mechanisms <\/td>\n<\/tr>\n
2325<\/td>\n15.3.3.3 Community entry for systems using a common PHY profile <\/td>\n<\/tr>\n
2327<\/td>\n15.3.3.4 Base Station Descriptor (BSD) message <\/td>\n<\/tr>\n
2328<\/td>\n15.3.3.5 Subscriber Station Uplink Radio Frequency (SSURF) message <\/td>\n<\/tr>\n
2329<\/td>\n15.3.4 Coexistence signaling mechanisms
15.3.4.1 Coexistence Signaling Interval <\/td>\n<\/tr>\n
2331<\/td>\n15.3.4.1.1 DL timing adjustment for coexistence signaling
15.3.4.1.2 CSI scheduling <\/td>\n<\/tr>\n
2333<\/td>\n15.3.4.1.3 CSI sequence structure <\/td>\n<\/tr>\n
2334<\/td>\n15.3.4.2 Community entry of new BS using CSI <\/td>\n<\/tr>\n
2336<\/td>\n15.3.4.3 BS Neighborhood Update Request BroadCasting (BS_NURBC) <\/td>\n<\/tr>\n
2337<\/td>\n15.3.4.4 OCSI collision detection and resolution in operation phase <\/td>\n<\/tr>\n
2338<\/td>\n15.3.5 Interferer identification <\/td>\n<\/tr>\n
2339<\/td>\n15.3.5.1 Interferer identification using CXCC
15.3.5.2 Scheduled interference evaluation <\/td>\n<\/tr>\n
2340<\/td>\n15.3.5.2.1 Interference Evaluation Burst scheduling <\/td>\n<\/tr>\n
2341<\/td>\n15.3.5.3 Reciprocal interference estimation
15.3.5.3.1 Reciprocal uplink interference estimation <\/td>\n<\/tr>\n
2342<\/td>\n15.3.5.3.2 Reciprocal downlink interference estimation
15.4 Interference prevention <\/td>\n<\/tr>\n
2343<\/td>\n15.4.1 Coexistence frame
15.4.1.1 Overview
15.4.1.2 Scheduling of interference free intervals in the context of IEEE 802.16 MAC <\/td>\n<\/tr>\n
2346<\/td>\n15.4.1.3 General rules <\/td>\n<\/tr>\n
2347<\/td>\n15.4.1.4 Coordinated Contention-Based Protocol <\/td>\n<\/tr>\n
2348<\/td>\n15.4.1.4.1 Frame structure for CX-CBP <\/td>\n<\/tr>\n
2349<\/td>\n15.4.1.4.2 CX-CBP description <\/td>\n<\/tr>\n
2353<\/td>\n15.4.1.5 CX-Frame Legacy SS support
15.4.1.5.1 Method A <\/td>\n<\/tr>\n
2354<\/td>\n15.4.1.5.2 Method B
15.4.1.5.3 Method C <\/td>\n<\/tr>\n
2355<\/td>\n15.4.2 Working channel allocation optimization
15.4.2.1 How to select a free channel (for ACS and DFS) <\/td>\n<\/tr>\n
2357<\/td>\n15.4.2.2 Optimization of channel distribution <\/td>\n<\/tr>\n
2358<\/td>\n15.4.3 Master Frame allocation optimization <\/td>\n<\/tr>\n
2361<\/td>\n15.4.4 Interference control in subframes <\/td>\n<\/tr>\n
2362<\/td>\n15.4.5 Credit Token-Based Coexistence Protocol (CT-CXP)
15.4.5.1 CT-CXP procedures
15.4.5.1.1 Whole CT-CXP procedure <\/td>\n<\/tr>\n
2364<\/td>\n15.4.5.1.2 CT-CXP offering procedure <\/td>\n<\/tr>\n
2367<\/td>\n15.4.5.1.3 CT-CXP requesting procedure <\/td>\n<\/tr>\n
2370<\/td>\n15.4.5.2 Payoff calculation
15.4.5.3 Inter-BSs communications for CT-CXP
15.5 Intersystem over-the-air communications
15.5.1 Procedure of intersystem communication over air <\/td>\n<\/tr>\n
2373<\/td>\n15.5.2 CT-CXP <\/td>\n<\/tr>\n
2374<\/td>\n15.5.3 MAC messages for intersystem communication over-the-air <\/td>\n<\/tr>\n
2375<\/td>\n15.5.3.1 CX-FWD-REQ [Action Code: Base Station Descriptor (BSD)] <\/td>\n<\/tr>\n
2376<\/td>\n15.5.3.2 CX-FWD-REQ [Action Code: Subscriber Station Uplink Radio Frequency (SSURF)] <\/td>\n<\/tr>\n
2377<\/td>\n15.5.3.3 CX-FWD-REQ [Action Code: CT-CXP Advertisement Request (CT-CX-ADV-REQ)]
15.5.3.4 CX-FWD-RSP [Action Code: CT-CXP Advertisement Response (CT-CX-ADV-RSP)] <\/td>\n<\/tr>\n
2378<\/td>\n15.5.3.5 CX-FWD-REQ [Action Code: CT-CXP Resource Allocation Request (CT-CX-RA- REQ)] <\/td>\n<\/tr>\n
2379<\/td>\n15.5.3.6 CX-FWD-RSP [Action Code: CT-CXP Resource Allocation Response (CT-CX-RA- RSP)]
15.5.3.7 CX-FWD-REQ [Action Code: CT-CXP Advertisement Discovery Policy Descriptor (CT-CX-ADPD)] <\/td>\n<\/tr>\n
2380<\/td>\n15.5.3.8 CX-FWD-REQ [Action Code: CT-CXP Acknowledgment (CT-CX-ACK)]
15.5.3.9 CX-FWD-RSP [Action Code: CT-CXP Notification (CT-CX-NTF)]
15.5.3.10 CX-FWD-REQ (Action Code: Add Neighbor Request)
15.5.3.11 CX-FWD-RSP (Action Code: Add Neighbor Response) <\/td>\n<\/tr>\n
2381<\/td>\n15.5.3.12 CX-FWD-REQ (Action Code: Delete Neighbor Request)
15.5.3.13 CX-FWD-RSP (Action code: Delete Neighbor Response)
15.5.3.14 CX-FWD-REQ (Action Code: Get Parameter for Interference Evaluation Burst Request)
15.5.3.15 CX-FWD-RSP (Action Code: Get Parameter for Interference Evaluation Burst Response) <\/td>\n<\/tr>\n
2382<\/td>\n15.5.3.16 CX-FWD-REQ (Action Code: Evaluate Interference Request) <\/td>\n<\/tr>\n
2383<\/td>\n15.5.3.17 CX-FWD-RSP (Action Code: Evaluate-Interference-Response)
15.5.3.18 CX-FWD-REQ (Action Code: Work as Slave Request) <\/td>\n<\/tr>\n
2384<\/td>\n15.5.3.19 CX-FWD-REQ (Action Code: Work as Slave Response) <\/td>\n<\/tr>\n
2385<\/td>\n15.5.3.20 CX-FWD-REQ (Action Code: Reduce Power or Quit Subframe Request)
15.5.3.21 CX-FWD-RSP (Action Code: Reduce Power or Quit Subframe Response) <\/td>\n<\/tr>\n
2386<\/td>\n15.5.3.22 CX-FWD-REQ (Action Code: CMI Interference Indication)
15.5.3.23 CX-FWD-RSP (Action Code: CMI Interference Resolution) <\/td>\n<\/tr>\n
2387<\/td>\n15.5.3.24 CX-FWD-REQ (Action Code: Channel Switch Request)
15.5.3.25 CX-FWD-RSP (Action Code: Channel Switch Response) <\/td>\n<\/tr>\n
2388<\/td>\n15.5.3.26 CX-FWD-REQ (Action Code: Master Subframe Switch Request)
15.5.3.27 CX-FWD-RSP (Action Code: Master Subframe Switch Response)
15.5.3.28 CX-FWD-REQ (Action Code: OCSI Backoff Request) <\/td>\n<\/tr>\n
2389<\/td>\n15.5.3.29 CX-FWD-RSP (Action Code: OCSI Backoff Response)
15.5.3.30 CX-FWD-REQ (Action code: SET CX Basic Parameters Request)
15.5.3.31 CX-FWD-RSP (Action code: SET CX Basic Parameters Response) <\/td>\n<\/tr>\n
2390<\/td>\n15.6 Coexistence Primitives for WirelessMAN-CX <\/td>\n<\/tr>\n
2391<\/td>\n15.6.1 C-CX-REQ
15.6.1.1 C-CX-REQ (Action_Type = Get Parameter for Interference Evaluation Burst)
15.6.1.1.1 Function <\/td>\n<\/tr>\n
2392<\/td>\n15.6.1.1.2 Semantics
15.6.1.1.3 When generated
15.6.1.1.4 Effect of receipt
15.6.1.2 C-CX-REQ (Action_Type = Evaluate Interference)
15.6.1.2.1 Function
15.6.1.2.2 Semantics <\/td>\n<\/tr>\n
2393<\/td>\n15.6.1.2.3 When generated
15.6.1.2.4 Effect of receipt <\/td>\n<\/tr>\n
2394<\/td>\n15.6.1.3 C-CX-REQ (Action_Type = Work as Slave)
15.6.1.3.1 Function
15.6.1.3.2 Semantics <\/td>\n<\/tr>\n
2395<\/td>\n15.6.1.3.3 When generated
15.6.1.3.4 Effect of receipt
15.6.1.4 C-CX-REQ (Action_Type = Reduce Power or Quit Subframe)
15.6.1.4.1 Function
15.6.1.4.2 Semantics <\/td>\n<\/tr>\n
2396<\/td>\n15.6.1.4.3 When generated
15.6.1.4.4 Effect of receipt
15.6.1.5 C-CX-REQ (Action_Type = CMI Interference Resolution)
15.6.1.5.1 Function
15.6.1.5.2 Semantics <\/td>\n<\/tr>\n
2397<\/td>\n15.6.1.5.3 When generated
15.6.1.5.4 Effect of receipt
15.6.1.6 C-CX-REQ (Action_Type = Channel Switch)
15.6.1.6.1 Function <\/td>\n<\/tr>\n
2398<\/td>\n15.6.1.6.2 Semantics of the service primitive
15.6.1.6.3 When generated
15.6.1.6.4 Effect of receipt
15.6.1.7 C-CX-REQ (Action_Type = Token Advertisement)
15.6.1.7.1 Function <\/td>\n<\/tr>\n
2399<\/td>\n15.6.1.7.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2400<\/td>\n15.6.1.7.3 When generated
15.6.1.7.4 Effect of receipt
15.6.1.8 C-CX-REQ (Action_Type = Token Negotiation)
15.6.1.8.1 Function
15.6.1.8.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2401<\/td>\n15.6.1.8.3 When generated
15.6.1.8.4 Effect of receipt
15.6.1.9 C-CX-REQ (Action_Type = Token Resource Allocation)
15.6.1.9.1 Function
15.6.1.9.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2402<\/td>\n15.6.1.9.3 When generated <\/td>\n<\/tr>\n
2403<\/td>\n15.6.1.9.4 Effect of receipt
15.6.1.10 C-CX-REQ (Action_Type = Frequency Channel Avoidance)
15.6.1.10.1 Function
15.6.1.10.2 Semantics <\/td>\n<\/tr>\n
2404<\/td>\n15.6.1.10.3 When generated
15.6.1.10.4 Effect of receipt <\/td>\n<\/tr>\n
2405<\/td>\n15.6.1.11 C-CX-REQ (Action_Type = Master Subframe Switch)
15.6.1.11.1 Function
15.6.1.11.2 Semantics of the service primitive
15.6.1.11.3 When generated
15.6.1.11.4 Effect of receipt <\/td>\n<\/tr>\n
2406<\/td>\n15.6.1.12 C-CX-REQ (Action_Type = OCSI Backoff)
15.6.1.12.1 Function
15.6.1.12.2 Semantics of the service primitive
15.6.1.12.3 When generated
15.6.1.12.4 Effect of receipt <\/td>\n<\/tr>\n
2407<\/td>\n15.6.1.13 C-CX-REQ (Action_Type = SET CX Basic Parameters)
15.6.1.13.1 Function
15.6.1.13.2 Semantics of the service primitive
15.6.1.13.3 When generated <\/td>\n<\/tr>\n
2408<\/td>\n15.6.1.13.4 Effect of receipt
15.6.2 C-CX-RSP <\/td>\n<\/tr>\n
2409<\/td>\n15.6.2.1 C-CX-RSP (Action_Type = Get Parameter for Interference Evaluation Burst)
15.6.2.1.1 Function
15.6.2.1.2 Semantics
15.6.2.1.3 When generated <\/td>\n<\/tr>\n
2410<\/td>\n15.6.2.1.4 Effect of receipt
15.6.2.2 C-CX-RSP (Action_Type = Evaluate Interference)
15.6.2.2.1 Function
15.6.2.2.2 Semantics <\/td>\n<\/tr>\n
2411<\/td>\n15.6.2.2.3 When generated
15.6.2.2.4 Effect of receipt
15.6.2.3 C-CX-RSP (Action_Type = Work as Slave)
15.6.2.3.1 Function
15.6.2.3.2 Semantics
15.6.2.3.3 When generated
15.6.2.3.4 Effect of receipt <\/td>\n<\/tr>\n
2412<\/td>\n15.6.2.4 C-CX-RSP (Action_Type = Reduce Power or Quit Subframe)
15.6.2.4.1 Function
15.6.2.4.2 Semantics
15.6.2.4.3 When generated
15.6.2.4.4 Effect of receipt
15.6.2.5 C-CX-RSP (Action_Type=CMI Interference Resolution)
15.6.2.5.1 Function <\/td>\n<\/tr>\n
2413<\/td>\n15.6.2.5.2 Semantics
15.6.2.5.3 When generated
15.6.2.5.4 Effect of receipt
15.6.2.6 C-CX-RSP (Action_Type = Channel Switch)
15.6.2.6.1 Function <\/td>\n<\/tr>\n
2414<\/td>\n15.6.2.6.2 Semantics of the service primitive
15.6.2.6.3 When generated
15.6.2.6.4 Effect of receipt
15.6.2.7 C-CX-RSP (Action_Type = Token Advertisement)
15.6.2.7.1 Function <\/td>\n<\/tr>\n
2415<\/td>\n15.6.2.7.2 Semantics of the service primitive
15.6.2.7.3 When generated
15.6.2.7.4 Effect of receipt <\/td>\n<\/tr>\n
2416<\/td>\n15.6.2.8 C-CX-RSP (Action_Type = Token Negotiation)
15.6.2.8.1 Function
15.6.2.8.2 Semantics of the service primitive
15.6.2.8.3 When generated
15.6.2.8.4 Effect of receipt <\/td>\n<\/tr>\n
2417<\/td>\n15.6.2.9 C-CX-RSP (Action_Type = Token Resource Allocation)
15.6.2.9.1 Function
15.6.2.9.2 Semantics of the service primitive
15.6.2.9.3 When generated
15.6.2.9.4 Effect of receipt
15.6.2.10 C-CX-RSP (Action_Type = Frequency Channel Avoidance)
15.6.2.10.1 Function <\/td>\n<\/tr>\n
2418<\/td>\n15.6.2.10.2 Semantics
15.6.2.10.3 When generated
15.6.2.10.4 Effect of receipt
15.6.2.11 C-CX-RSP (Action_Type = Master Subframe Switch)
15.6.2.11.1 Function
15.6.2.11.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2419<\/td>\n15.6.2.11.3 When generated
15.6.2.11.4 Effect of receipt
15.6.2.12 C-CX-RSP (Action_Type = OCSI backoff)
15.6.2.12.1 Function
15.6.2.12.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2420<\/td>\n15.6.2.12.3 When generated
15.6.2.12.4 Effect of receipt
15.6.2.13 C-CX-RSP (Action_Type = SET CX Basic Parameters)
15.6.2.13.1 Function
15.6.2.13.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2421<\/td>\n15.6.2.13.3 When generated
15.6.2.13.4 Effect of receipt
15.6.3 C-CX-IND
15.6.3.1 C-CX-IND (Event_Type = Token Frame Status Update)
15.6.3.1.1 Function
15.6.3.1.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2422<\/td>\n15.6.3.1.3 When generated
15.6.3.1.4 Effect of receipt
15.6.4 C-CX-ACK
15.6.4.0.1 Function
15.6.4.0.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2423<\/td>\n15.6.4.0.3 When generated
15.6.4.0.4 Effect of receipt
15.6.5 M-CX-REQ
15.6.5.1 M-CX-REQ (Action_Type = Search Neighbors)
15.6.5.1.1 Function
15.6.5.1.2 Semantics <\/td>\n<\/tr>\n
2424<\/td>\n15.6.5.1.3 When generated
15.6.5.1.4 Effect of receipt
15.6.5.2 M-CX-REQ (Action_Type = Add neighbor)
15.6.5.2.1 Function
15.6.5.2.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2425<\/td>\n15.6.5.2.3 When generated
15.6.5.2.4 Effect of receipt
15.6.5.3 M-CX-REQ (Action_Type = Delete Neighbor)
15.6.5.3.1 Function
15.6.5.3.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2426<\/td>\n15.6.5.3.3 When generated
15.6.5.3.4 Effect of receipt
15.6.6 M-CX-RSP
15.6.6.1 M-CX-RSP (Action_Type = Search Neighbors)
15.6.6.1.1 Function <\/td>\n<\/tr>\n
2427<\/td>\n15.6.6.1.2 Semantics <\/td>\n<\/tr>\n
2428<\/td>\n15.6.6.1.3 When generated
15.6.6.1.4 Effect of receipt
15.6.6.2 M-CX-RSP (Action_Type = Add neighbor)
15.6.6.2.1 Function
15.6.6.2.2 Semantics of the service primitive
15.6.6.2.3 When generated
15.6.6.2.4 Effect of receipt
15.6.6.3 M-CX-RSP (Action_Type = Delete neighbor)
15.6.6.3.1 Function <\/td>\n<\/tr>\n
2429<\/td>\n15.6.6.3.2 Semantics of the service primitive
15.6.6.3.3 When generated
15.6.6.3.4 Effect of receipt
15.6.7 M-CX-IND
15.6.7.1 M-CX-IND (Event_Type = Leaving Neighborhood)
15.6.7.1.1 Function
15.6.7.1.2 Semantics of the service primitive <\/td>\n<\/tr>\n
2430<\/td>\n15.6.7.1.3 When generated
15.6.7.1.4 Effect of receipt
15.6.8 M-CX-ACK
15.6.8.1 Function
15.6.8.2 Semantics of the service primitive
15.6.8.3 When generated <\/td>\n<\/tr>\n
2431<\/td>\n15.6.8.4 Effect of receipt
15.7 Network-based identification of specific spectrum services or applications
15.7.1 Overview <\/td>\n<\/tr>\n
2432<\/td>\n15.7.2 Architecture
15.7.3 Operation <\/td>\n<\/tr>\n
2433<\/td>\nAnnex A (informative) Bibliography <\/td>\n<\/tr>\n
2437<\/td>\nAnnex B (informative) Supporting material for frequencies below 11 GHz <\/td>\n<\/tr>\n
2445<\/td>\nAnnex C (informative) Example MAC common part sublayer service definition <\/td>\n<\/tr>\n
2457<\/td>\nAnnex D (informative) Messages sequence charts (MSCs) <\/td>\n<\/tr>\n
2469<\/td>\nAnnex E (informative) HO block diagrams <\/td>\n<\/tr>\n
2475<\/td>\nAnnex F (informative) Test vectors <\/td>\n<\/tr>\n
2497<\/td>\nAnnex G (informative) LDPC direct encoding <\/td>\n<\/tr>\n
2501<\/td>\nAnnex H (informative) Definitions of wmanPriMib <\/td>\n<\/tr>\n
2509<\/td>\nAnnex I (informative) Alternative variation of replay protection for management messages in limited mobility environment <\/td>\n<\/tr>\n
2511<\/td>\nAnnex J (informative) Handover, Ranging, and MIH procedures <\/td>\n<\/tr>\n
2519<\/td>\nAnnex K (informative) U-TDOA measurement <\/td>\n<\/tr>\n
2525<\/td>\nAnnex L (informative) Example Encapsulation of an IEEE 802.16 entity <\/td>\n<\/tr>\n
2527<\/td>\nAnnex M (informative) Network Control and Management System (NCMS) <\/td>\n<\/tr>\n
2529<\/td>\nAnnex N (informative) Processing of CMAC_KEY_COUNT by the authenticator <\/td>\n<\/tr>\n
2531<\/td>\nAnnex O (informative) PAPR for given preamble modulation index <\/td>\n<\/tr>\n
2535<\/td>\nAnnex P (informative) QoS parameters for a tunnel <\/td>\n<\/tr>\n
2537<\/td>\nAnnex Q (informative) Information in distributed database for WirelessMAN-CX systems using ASN.1 <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

IEEE Standard for Air Interface for Broadband Wireless Access Systems<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
IEEE<\/b><\/a><\/td>\n2012<\/td>\n2544<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":82201,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[2644],"product_tag":[],"class_list":{"0":"post-82200","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-ieee","8":"first","9":"instock","10":"sold-individually","11":"shipping-taxable","12":"purchasable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/82200","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/82201"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=82200"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=82200"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=82200"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}