AS 1012.13:2015
$27.30
Methods of testing concrete – Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
| Published By | Publication Date | Number of Pages |
| AS | 2015-06-19 | 13 |
This Standard sets out a method for curing concrete shrinkage specimens in the laboratory, and for determining the length changes of these specimens due to drying in air. It provides for testing of specimens prepared in the laboratory or in the field in accordance with AS 1012.8.4, in which the nominal size of aggregate in the concrete, in accordance with AS 2758.1, does not exceed 40 mm.
Related products
-
AS 1012.23:2015
Methods of testing concrete – Water content of freshly mixed concrete – Microwave oven method…
-
AS 1012.24:2015
Methods of testing concrete – Determination of the tensile bond strength of concrete – Repairs…
-
BS EN IEC 61730-2:2018
Photovoltaic (PV) module safety qualification – Requirements for testing Published By Publication Date Number of…
-
ASTM-D3872 2005
D3872-05 Standard Test Method for Ferrous Iron in Iron Oxides Published By Publication Date Number…
-
BS EN ISO 10113:2020
Metallic materials. Sheet and strip. Determination of plastic strain ratio Published By Publication Date Number…
-
ISO 10121-2:2013
Méthodes d’essai pour l’évaluation de la performance des médias et des dispositifs de filtration moléculaire…
-
AS 5013.13:2018
Food microbiology – Microbiology of the food chain – Horizontal method for the detection of…
-
IEEE 802.1AS-2020
IEEE Standard for Local and Metropolitan Area Networks–Timing and Synchronization for Time-Sensitive Applications Published By…
-
ASTM-D3970 2005
D3970-05 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination Published By Publication…
-
BS EN 15337:2007
Adhesives. Determination of shear of anaerobic adhesives using pin-and-collar specimens Published By Publication Date Number…
-
ASTM-D3076 2005
D3076-00(2005) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers Published…
-
ICAO 10121:2019
Manual on Ground Handling Published By Publication Date Number of Pages ICAO 2019 112
-
AS 1012.6:2014
Methods of testing concrete – Determination of bleeding of concrete Published By Publication Date Number…
-
BS EN ISO 80601-2-87:2021
Medical electrical equipment – Particular requirements for basic safety and essential performance of high-frequency ventilators…
-
ICC SignificantChangestoA117.1 2009
Significant Changes to the A117.1 Accessibility Standard: 2009 Edition Published By Publication Date Number of…
-
AS 1012.14:2018
Methods of testing concrete – Method for securing and testing cores from hardened concrete for…
-
AS 1012.2:2014
Methods of testing concrete – Preparing concrete mixes in the laboratory Published By Publication Date…
-
BS EN ISO 10113:2014:2015 Edition
Metallic materials. Sheet and strip. Determination of plastic strain ratio Published By Publication Date Number…
-
AS 1012.4.3:2014
Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring…
-
ASTM-D3070 2005
D3070-00(2005) Standard Test Method of Rapid Pressure Determination of Pressurized Products Published By Publication Date…
-
BS EN IEC 60598-2-17:2018
Luminaires – Particular requirements. Luminaires for stage lighting, television and film studios (outdoor and indoor)…
-
IEEE 802.3bk-2013
IEEE Standard for Ethernet – Amendment 1: Physical Layer Specifications and Management Parameters for Extended…
-
IEEE 802.3bk 2013
IEEE Standard for EthernetAmendment 1: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive…
-
BS EN ISO 10113:2020
Metallic materials. Sheet and strip. Determination of plastic strain ratio Published By Publication Date Number…
-
IEEE 802.1ASdr-2024
IEEE Standard for Local and Metropolitan Area Networks–Timing and Synchronization for Time‐Sensitive Applications Amendment 1:…
-
AS 1012.9:2014
Methods of testing concrete – Compressive strength tests – Concrete, mortar and grout specimens Published…
-
AS 1012.1:2014
Methods of testing concrete – Sampling of concrete Published By Publication Date Number of Pages…
-
BS EN ISO 10123:2019
Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens Published By Publication Date…
-
AS 1012.8.3:2015
Methods of testing concrete – Methods of making and curing concrete – Mortar and grout…
-
ASTM-E259 2011
E259-06(2011) Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical…
-
ISO 10123:2013
Adhésifs — Détermination de la résistance au cisaillement des adhésifs anaérobies sur assemblage type axe-bague…
-
BS EN ISO 80601-2-12:2020
Medical electrical equipment – Particular requirements for basic safety and essential performance of critical care…
-
AS 1112.1:2015
ISO metric hexagon nuts – Style 1 – Product grades A and B Published By…
-
AS 1012.5:2014
Methods of testing concrete – Determination of mass per unit volume of freshly mixed concrete…
-
AS 1112.3:2015
ISO metric hexagon nuts – Product grade C Published By Publication Date Number of Pages…
-
IEEE 802.1ASdr-2024
IEEE Standard for Local and Metropolitan Area Networks–Timing and Synchronization for Time‐Sensitive Applications Amendment 1:…
-
IEEE 802.1ASdr-2024
IEEE Standard for Local and Metropolitan Area Networks–Timing and Synchronization for Time‐Sensitive Applications Amendment 1:…
-
ISO 10121-1:2014
Test method for assessing the performance of gas-phase air cleaning media and devices for general…
-
BS EN 10213:2007+A1:2016
Steel castings for pressure purposes Published By Publication Date Number of Pages BSI 2016 32
-
ASTM-D2500 2011
D2500-11 Standard Test Method for Cloud Point of Petroleum Products Published By Publication Date Number…
