AS 1961.3:2004
$37.70
Castors and wheels – Castors for furniture (ISO 22879:2004, MOD)
| Published By | Publication Date | Number of Pages |
| AS | 2004-10-15 | 24 |
Adopts ISO 22879:2004 with national modifications providing an additional performance level in an Appendix. ISO 22879 specifies technical requirements, appropriate dimensions and requirements for testing. Applies to castors for general furniture applications but specifically excludes those for swivel chairs and other specialized applications.
Scope
This International Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors for furniture.
It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.
NOTE Castors for swivel chairs are specified in ISO 22880.
Related products
-
AS 1961.2:2004
Castors and wheels – Test methods and apparatus Published By Publication Date Number of Pages…
-
AS ISO 10651.3:2004
Lung ventilators for medical use – Particular requirements for emergency and transport ventilators Published By…
-
ISO 15613:2004
Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding…
-
ISO 19123:2005
Information géographique — Schéma de la géométrie et des fonctions de couverture Published By Publication…
-
AS 1961.8:2004
Castors and wheels – Applications over 1.1 m/s (4 km/h) and up to 4.4 m/s…
-
AS 1926.3:2003
Swimming pool safety – Water recirculation systems Published By Publication Date Number of Pages AS…
-
ISO 16103:2005
Packaging — Transport packaging for dangerous goods — Recycled plastics material Published By Publication Date…
-
IEEE 1451.3 2004
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators – Digital Communication and…
-
IEEE 1671.3-2007
IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML…
-
IEEE 1671.3 2008
IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via eXtensible…
-
AS 1731.3:2003 (R2013)
Refrigerated display cabinets – Linear dimensions, areas and volumes Published By Publication Date Number of…
-
AS 1101.3:2005 (R2018)
Graphical symbols for general engineering – Welding and non-destructive examination Published By Publication Date Number…
-
AS EN 1060.3:2004
Non-invasive sphygmomanometers – Supplementary requirements for electromechanical blood pressure measuring systems Published By Publication Date…
-
ISO 18613:2003
Repair of flat wooden pallets Published By Publication Date Number of Pages ISO 2003-05 22
-
AS 1961.1:2004
Castors and wheels – Vocabulary, symbols and multilingual terminology Published By Publication Date Number of…
-
BS EN 196103:2000
Blank detail specification: Rotary switches. Assessment level Y Published By Publication Date Number of Pages…
-
IEEE 1516.3 2003
IEEE Recommended Practice for High Level Architecture (HLA) Federation Development and Execution Process (FEDEP) Published…
-
AS 1121.3:2007
Agricultural tractor power take-offs – Rear-mounted power take-off types 1, 2 and 3 – Main…
-
ISO 18613:2014
Pallets for materials handling — Repair of flat wooden pallets Published By Publication Date Number…
-
AS 1562.3:2006 (R2018)
Design and installation of sheet roof and wall cladding – Plastic Published By Publication Date…
-
IEEE 1516.3-2003
IEEE Recommended Practice for High Level Architecture (HLA) Federation Development and Execution Process (FEDEP) Published…
-
ISO 19113:2002
Geographic information — Quality principles Published By Publication Date Number of Pages ISO 2002-12 36
-
ISO 16133:2004
Soil quality — Guidance on the establishment and maintenance of monitoring programmes Published By Publication…
-
IEEE 1937.3-2024
IEEE Standard for Flight Data Transmission of Civil Unmanned Aerial Vehicle Based on Short Message…
-
AS 1960.1:2005
Motor vehicle brake fluids – Non-petroleum type Published By Publication Date Number of Pages AS…
-
AS 1816.3:2007 (R2017)
Metallic materials – Brinell hardness test – Calibration of reference blocks Published By Publication Date…
-
AS 1961.7:2004
Castors and wheels – Applications up to 1.1 m/s (4 km/h) Published By Publication Date…
-
IEEE 1451.3-2003
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators – Digital Communication and…
-
AS 1617.3:2003 (R2013)
Refractory bricks and shapes – High alumina Published By Publication Date Number of Pages AS…
-
AS 1961.5:2004
Castors and wheels – Castors for manually propelled equipment for institutional applications Published By Publication…
-
AS 4969.3:2008 (R2018)
Analysis of acid sulfate soil – Dried samples – Methods of test – Determination of…
-
AS/NZS 1841.3:2007
Portable fire extinguishers – Specific requirements for wet chemical type extinguishers Published By Publication Date…
-
IEEE 1937.3-2024
IEEE Standard for Flight Data Transmission of Civil Unmanned Aerial Vehicle Based on Short Message…
-
AS 1961.6:2004
Castors and wheels – Hospital bed castors Published By Publication Date Number of Pages AS…
-
ISO 16143-2:2004
Stainless steels for general purposes — Part 2: Semi-finished products, bars, rods and sections Published…
-
IEEE 1937.3-2024
IEEE Standard for Flight Data Transmission of Civil Unmanned Aerial Vehicle Based on Short Message…
-
IEEE 1937.3-2024
IEEE Standard for Flight Data Transmission of Civil Unmanned Aerial Vehicle Based on Short Message…
-
AS 1961.4:2004
Castors and wheels – Castors for furniture – Castors for swivel chairs Published By Publication…
-
ISO 19813:2006
Road vehicles — Ignition systems — Test methods and requirements for high voltage boots on…
-
AS 1613:2005
Timber – Colours for marking F-grades Published By Publication Date Number of Pages AS 2005-09-13…
