AS 2550.1:2002
$59.80
Cranes, hoists and winches – Safe use – General requirements
| Published By | Publication Date | Number of Pages |
| AS | 2002-05-24 | 69 |
Specifies the minimum requirements for the safe use of cranes. It also specifies requirements for planning, selection, siting, erection and dismantling, operation, maintenance, inspection and repair of cranes.
Scope
This Standard specifies general requirements for the safe use of cranes, hoists and winches. Where this Standard uses the word ‘crane’ it shall be taken to mean ‘hoist’, ‘winch’ or components as defined in AS 2549.
Related products
-
AS 2560.1:2002
Sports lighting – General principles Published By Publication Date Number of Pages AS 2002-05-10 45
-
AS EN 556.1:2002
Sterilization of medical devices – Requirements for medical devices to be designated [STERILE] – Requirements…
-
AS 2505.5:2002 (R2017)
Metallic materials – Wire – Simple torsion test Published By Publication Date Number of Pages…
-
IEEE 1450.1 2005
(Replaced) IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for…
-
AS 2670.1:2001 (R2016)
Evaluation of human exposure to whole-body vibration – General requirements Published By Publication Date Number…
-
AS 2505.2:2004 (R2017)
Metallic materials – Bars, rods and solid shapes – Bend tests Published By Publication Date…
-
AS 2505.4:2002 (R2017)
Metallic materials – Wire – Reverse bend test Published By Publication Date Number of Pages…
-
AS 2610.1:2007 (R2016)
Spa pools – Public spas Published By Publication Date Number of Pages AS 2007-07-12 37
-
AS 2350.9:2006 (R2016)
Methods of testing portland, blended and masonry cements – Determination of residue on the 45…
-
AS 2030.1:2009
Gas cylinders – General requirements Published By Publication Date Number of Pages AS 2009-01-28 29
-
IEEE 1505.1 2008:2013 Edition
IEEE Trial-Use Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics…
-
AS 2505.3:2004 (R2017)
Metallic materials – Tubular products – Bend and related tests Published By Publication Date Number…
-
AS 2350.14:2006 (R2016)
Methods of testing portland, blended and masonry cements – Length change of cement mortars exposed…
-
AS 2156.1:2001 (R2018)
Walking tracks – Classification and signage Published By Publication Date Number of Pages AS 2001-05-28…
-
AS 2252.1:2002
Biological safety cabinets – Biological safety cabinets (Class I) for personnel and environment protection Published…
-
AS 5350.1:2022
Privately contracted security and detection dogs Acquisition, welfare, training, deployment and retirement Published By Publication…
-
AS 3555.1:2003
Building elements – Testing and rating for intruder resistance – Intruder-resistant panels Published By Publication…
-
AS 2550.4:2004
Cranes, hoists and winches – Safe use – Tower cranes Published By Publication Date Number…
-
AS 2503.1:2006 (R2017)
Refractories and refractory materials – Chemical analysis – Silica refractories Published By Publication Date Number…
-
AS/NZS 2350.16:2001
Methods of testing portland, blended and masonry cements – Determination of air content of masonry…
-
AS 2350.12:2006 (R2016)
Methods of testing portland, blended and masonry cements – Preparation of a standard mortar and…
-
AS/NZS 2890.1:2004
Parking facilities – Off-street car parking Published By Publication Date Number of Pages AS 2004-03-05…
-
AS/NZS 2350.1:2006 (R2016)
Methods of testing portland, blended and masonry cements – Sampling Published By Publication Date Number…
-
AS 2550.19:2007
Cranes, hoists and winches – Safe use – Telescopic handlers Published By Publication Date Number…
-
AS 2350.7:2006 (R2016)
Methods of testing portland, blended and masonry cements – Determination of temperature rise during hydration…
-
AS 2350.2:2006 (R2016)
Methods of testing portland, blended and masonry cements – Chemical composition Published By Publication Date…
-
AS 2452.1:2004 (R2017)
Non-destructive testing – Determination of thickness – Determination of wall thickness of pipe by the…
-
AS 4350.1:2005
Heavy mineral sand concentrates – Physical testing – Size analysis Published By Publication Date Number…
-
AS 2550.3:2002
Cranes, hoists and winches – Safe use – Bridge, gantry, portal (including container cranes), jib…
-
AS ISO 25539.1:2003
Cardiovascular implants – Endovascular devices – Endovascular prostheses Published By Publication Date Number of Pages…
-
AS 2205.1:2003 (R2018)
Methods for destructive testing of welds in metal – General requirements for tests Published By…
-
AS 2550.20:2005
Cranes, hoists and winches – Safe use – Self-erecting tower cranes Published By Publication Date…
-
AS/NZS 2535.1:2007
Test methods for solar collectors – Thermal performance of glazed liquid heating collectors including pressure…
-
AS 2505.6:2002 (R2017)
Metallic materials – Wire – Wrapping test Published By Publication Date Number of Pages AS…
-
AS 2505.1:2004 (R2017)
Metallic materials – Sheet, strip and plate – Bend tests Published By Publication Date Number…
-
AS 2350.13:2006 (R2016)
Methods of testing portland, blended and masonry cements – Determination of drying shrinkage of cement…
-
AS 2900.1:2002
Quantities and units – Space and time Published By Publication Date Number of Pages AS…
-
AS 2550.10:2006
Cranes, hoists and winches – Safe use – Mobile elevating work platforms Published By Publication…
-
IEEE 1505.1-2008
IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test…
-
AS ISO 6750.1:2020
Earth-moving machinery – Operator’s manual – Contents and format Published By Publication Date Number of…
