AS 2809.5:2001
$37.70
Road tank vehicles for dangerous goods – Tankers for bitumen-based products
| Published By | Publication Date | Number of Pages |
| AS | 2001-10-08 | 28 |
Specifies requirements for the design and construction of tankers for the transport of cutback bitumen, inclusive of bitumen sprayers. This Standard introduces the concept, and control design details for both automatic and atmospheric burners, for their use whilst the tanker is being normally driven. The requirements in this Standard are complementary to those requirements necessary to comply with AS 2809.1-1999.
Scope
This Standard specifies requirements for the design and construction of tankers for the transport of bitumen-based products including bitumen sprayers. It is complementary to AS 2809.1.
Related products
-
AS/NZS 2890.6:2009
Parking facilities – Off-street parking for people with disabilities Published By Publication Date Number of…
-
ISO 20965:2021
Plastics — Determination of the transient extensional viscosity of polymer melts Published By Publication Date…
-
AS 2359.5:2005 (R2016)
Powered industrial trucks – Symbols for operator controls and other displays Published By Publication Date…
-
ISO 20905:2004
Coal preparation — Determination of dust/moisture relationship for coal Published By Publication Date Number of…
-
AS 2809.4:2001
Road tank vehicles for dangerous goods – Tankers for toxic and corrosive cargoes Published By…
-
AS 2806.4:2004 (R2016)
Aluminium ores – Sampling – Determination of heterogeneity of constitution Published By Publication Date Number…
-
ISO 24095:2021
Workplace air – Guidance for the measurement of respirable crystalline silica Published By Publication Date…
-
AS 2106.5:2005 (R2016)
Methods for the determination of the flash point of flammable liquids (closed cup) – Determination…
-
TIA-2001.5-E:2010
Interoperability Specification (IOS) for cdma2000 Access Network Interfaces – Part 5: A3 and A7 Interfaces…
-
AS 2806.7:2004 (R2016)
Aluminium ores – Sampling – Determination of quality variation (ISO 6139:1993, MOD) Published By Publication…
-
AS 2806.3:2001 (R2013)
Aluminium ores – Sampling – Preparation of samples Published By Publication Date Number of Pages…
-
AS 2879.5:2004 (R2016)
Alumina – Determination of angle of flow Published By Publication Date Number of Pages AS…
-
AS 2888.5:2002 (R2017)
Methods of testing plastics waste fittings – Trap seal test Published By Publication Date Number…
-
ISO 24095:2009
Workplace air — Guidance for the measurement of respirable crystalline silica Published By Publication Date…
-
AS 2609.1:2005 (R2016)
Methods for assessing modifications to the flavour of foodstuffs due to packaging – Sensory analysis…
-
HB 207.5:2005
Environmental management – Integrating environmental aspects into design and development of electrotechnical products Published By…
-
AS 2879.2:2003
Alumina – Determination of particles passing a 20 micrometre aperture sieve Published By Publication Date…
-
AS 2815.5:2006
Training and certification of occupational divers – Dive supervisor Published By Publication Date Number of…
-
AS/NZS 2890.1:2004
Parking facilities – Off-street car parking Published By Publication Date Number of Pages AS 2004-03-05…
-
AS 2879.4:2003
Alumina – Determination of specific surface area by nitrogen adsorption Published By Publication Date Number…
-
AS 2879.3:2010 (R2013)
Alumina – Determination of alpha alumina content by X-ray diffraction Published By Publication Date Number…
-
ANSI C80.5:2005
American National Standard for Electrical Rigid Aluminum Conduit (ERAC) Published By Publication Date Number of…
-
AS 2400.5:2005 (R2016)
Packaging – Temporary corrosion protection Published By Publication Date Number of Pages AS 2005-06-15 21
-
AS 2503.5:2003 (R2013)
Refractories and refractory materials – Chemical analysis – Chrome-bearing materials Published By Publication Date Number…
-
AS 2505.5:2002 (R2017)
Metallic materials – Wire – Simple torsion test Published By Publication Date Number of Pages…
-
AS 2806.6:2003 (R2013)
Aluminium ores – Sampling – Methods for checking the bias of sampling Published By Publication…
-
BS ISO 24095:2009 2010
Workplace air. Guidance for the measurement of respirable crystalline silica Published By Publication Date Number…
-
AS 2879.9:2002 (R2013)
Alumina – Determination of flow time Published By Publication Date Number of Pages AS 2002-07-18…
-
ISO 20965:2005
Plastics — Determination of the transient extensional viscosity of polymer melts Published By Publication Date…
-
AS 2489.5:2003
Methods for the analysis of zircon sand concentrates – Determination of zirconium plus hafnium content…
-
AS 2806.5:2003 (R2013)
Aluminium ores – Sampling – Methods for checking the precision of sampling Published By Publication…
-
AS ISO 389.5:2003
Acoustics – Reference zero for the calibration of audiometric equipment – Reference equivalent threshold sound…
-
AS 2879.1:2000
Alumina – Determination of loss of mass at 300 degrees Celsius and 1000 degrees Celsius…
-
AS 2832.5:2008 (R2018)
Cathodic protection of metals – Steel in concrete structures Published By Publication Date Number of…
-
AS 2900.5:2002
Quantities and units – Electricity and magnetism Published By Publication Date Number of Pages AS…
-
AS 2879.8:2000 (R2013)
Alumina – Determination of bulk density Published By Publication Date Number of Pages AS 2000-06-08…
-
AS 2805.9:2000 (R2013)
Electronic funds transfer – Requirements for interfaces – Privacy of communications Published By Publication Date…
-
AS 1807.5:2000
Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test – Determination of work…
-
AS 2809.3:2021
Road tank vehicles for dangerous goods – Road tank vehicles for compressed liquefied gases Published…
-
AS 2806.1:2003 (R2013)
Aluminium ores – Sampling – Sampling procedures Published By Publication Date Number of Pages AS…
