ASTM-C1375:2014 Edition
$35.75
C1375-00(2014) Standard Guide for Substrates Used in Testing Building Seals and Sealants
Published By | Publication Date | Number of Pages |
ASTM | 2014 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ASTM C1375-00-Reapproved2014
Historical Standard: Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C1375
Scope
1.1 This guide describes the recommended standard substrates and their recommended surface preparation for use in standard tests of building seals and sealants.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Keywords
aluminum; glass; mortar; substrate; surface preparation
ICS Code
ICS Number Code 91.100.50 (Binders. Sealing materials)
DOI: 10.1520/C1375-00R14
Standard Title | C1375-00(2014) Standard Guide for Substrates Used in Testing Building Seals and Sealants |
---|---|
Published Code | ASTM |
Publication Date | 2014 |
Pages Count | 3 |
ICS Codes | 91.100.50 - Binders. Sealing materials |
This document does not provide a preview.
Related products
-
ASTM-C1365:2011 Edition
C1365-06(2011) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and…
-
ASTM-C1373:2003 Edition
C1373-03 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter…
-
ASTM-C1375:2005 Edition
C1375-00(2005) Standard Guide for Substrates Used in Testing Building Seals and Sealants Published By Publication…
-
ASTM-C1675:2019 Edition
C1675-19 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm…
-
ASTM-C1374:2003 Edition
C1374-03 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation…
-
ASTM-C1357:2009 Edition(Redline)
C1357-09 Standard Test Methods for Evaluating Masonry Bond Strength (Redline) Published By Publication Date Number…
-
ASTM-C1305:2006 Edition
C1305-06 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane Published By Publication…
-
ASTM-C1315:2019 Edition
C1315-19 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete…
-
ASTM-C1355:2001 Edition
C1355/C1355M-96(2001) Standard Specification for Glass Fiber Reinforced Gypsum Composites Published By Publication Date Number of…
-
ASTM-C1375:2009 Edition
C1375-00(2009) Standard Guide for Substrates Used in Testing Building Seals and Sealants Published By Publication…
-
ASTM-C1335:2012 Edition(Redline)
C1335-12 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber…
-
ASTM-C1376:2010 Edition
C1376-10 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass Published By Publication…
-
ASTM-C1374:2023 Edition
C1374-18(2023) Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation…
-
ASTM-C1325:2021 Edition(Redline)
C1325-21 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units (Redline) Published By Publication Date Number…
-
ASTM-C1365:2018 Edition
C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and…
-
ASTM-C1376:1997 Edition
C1376-97 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass Published By Publication Date…
-
ASTM-C1372:2004 Edition
C1372-04e2 Standard Specification for Dry-Cast Segmental Retaining Wall Units Published By Publication Date Number of…
-
ASTM-C1305:2000 Edition
C1305-00 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane Published By Publication…
-
ASTM-C1475:2017 Edition(Redline)
C1475-17 Standard Guide for Determination of Neptunium-237 in Soil (Redline) Published By Publication Date Number…
-
ASTM-C1370:2005 Edition
C1370-00(2005) Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant…
-
ASTM-C1735:2011 Edition
C1735-11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation…
-
ASTM-C1373:2011 Edition
C1373/C1373M-11 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter…
-
ASTM-C1378:2009 Edition
C1378-04(2009) Standard Test Method for Determination of Resistance to Staining Published By Publication Date Number…
-
ASTM-C1374:2018 Edition
C1374-18 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation…
-
ASTM-C1275:2015 Edition
C1275-15 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid…
-
ASTM-C1375:2000 Edition
C1375-00 Standard Guide for Substrates Used in Testing Building Seals and Sealants Published By Publication…
-
ASTM-C1375:2020 Edition
C1375-00(2020) Standard Guide for Substrates Used in Testing Building Seals and Sealants Published By Publication…
-
ASTM-C1365:2006 Edition
C1365-06 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and…
-
ASTM-C1371:2010 Edition
C1371-04a(2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable…
-
ASTM-C1371:2015 Edition
C1371-15 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable…
-
ASTM-C1075:2017 Edition
C1075-17 Standard Practices for Sampling Uranium-Ore Concentrate Published By Publication Date Number of Pages ASTM…
-
ASTM-E1375:1994 Edition
E1375-90(1994)e1 Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical…
-
ASTM-C1775:2014 Edition(Redline)
C1775-14 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for…
-
ASTM-C1376:2003 Edition
C1376-03 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass Published By Publication…
-
ASTM-C1345:1996 Edition
C1345-96 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in…
-
ASTM-C1325:2022 Edition
C1325-22 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units Published By Publication Date Number of…
-
ASTM-C1377:2009 Edition(Redline)
C1377-97(2009) Standard Test Method for Calibration of Surface/Stress Measuring Devices (Redline) Published By Publication Date…
-
ASTM-C1305:2005 Edition
C1305-05 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane Published By Publication…
-
ASTM-C1376:2015 Edition
C1376-15 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass Published By Publication…
-
ASTM-C1315:2008 Edition
C1315-08 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete…