ASTM-C972 2000
$35.75
C972-00 Standard Test Method for Compression-Recovery of Tape Sealant
| Published By | Publication Date | Number of Pages |
| ASTM | 2000 | 3 |
1.1 This test method describes a laboratory procedure for determining compression-recovery characteristics of tape sealant.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Related products
-
ASTM-C992 2020
C992-20 Standard Specification for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage…
-
ASTM-C792 2004
C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking…
-
ASTM-C902 2004
C902-04a Standard Specification for Pedestrian and Light Traffic Paving Brick Published By Publication Date Number…
-
ASTM-C978 2009(Redline)
C978-04(2009) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix…
-
ASTM-C472 2004
C472-99(2004) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete Published…
-
ASTM-C902 2005
C902-05 Standard Specification for Pedestrian and Light Traffic Paving Brick Published By Publication Date Number…
-
ASTM-C932 2006
C932-06 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering Published By Publication Date Number…
-
ASTM-C932 2006(Redline)
C932-06 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering (Redline) Published By Publication Date…
-
ASTM-C902 2002
C902-02 Standard Specification for Pedestrian and Light Traffic Paving Brick Published By Publication Date Number…
-
ASTM-C952 2002
C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units Published By Publication…
-
ASTM-C927 2004
C927-80(2004) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area…
-
ASTM-C977 2000
C977-00 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization Published By Publication Date…
-
ASTM-C902 2000
C902-00 Standard Specification for Pedestrian and Light Traffic Paving Brick Published By Publication Date Number…
-
ASTM-C977 2010
C977-10 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization Published By Publication Date…
-
ASTM-C772 2009
C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants Published…
-
ASTM-C672 2003
C672/C672M-03 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals Published…
-
ASTM-E972 2002
E972-96(2002) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight Published By…
-
ASTM-C792 2020
C792-15(2020) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking…
-
ASTM-C932 2005
C932-05 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering Published By Publication Date Number…
-
ASTM-A972 2004
A972/A972M-00(2004) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles Published By Publication Date Number of…
-
ASTM-C974 2004
C974-87(2004) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting Published…
-
ASTM-B972 2020
B972-10(2020)e1 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in…
-
ASTM-C974 2020
C974-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting Published…
-
ASTM-C872 2010
C872-10 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces Published By…
-
ASTM-C772 2003
C772-03 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants Published…
-
ASTM-C922 2000
C922-00 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets Published By Publication Date Number of…
-
ASTM-C982 2003
C982-03 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems (Withdrawn 2008) Published…
-
ASTM-C792 2008
C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking…
-
ASTM-C792 2008(Redline)
C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking…
-
ASTM-C973 2004
C973-87(2004) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing Published…
-
ASTM-C942 2010
C942-10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory…
-
ASTM-C902 2001
C902-01a Standard Specification for Pedestrian and Light Traffic Paving Brick Published By Publication Date Number…
-
ASTM-C972 2006
C972-00(2006) Standard Test Method for Compression-Recovery of Tape Sealant Published By Publication Date Number of…
-
ASTM-C372 2001
C372-94(2001) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and…
-
ASTM-C975 2020
C975-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing Published…
-
ASTM-D972 2002
D972-02 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils Published By Publication…
-
ASTM-C975 2009
C975-87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing Published…
-
ASTM-C902 2006
C902-06 Standard Specification for Pedestrian and Light Traffic Paving Brick Published By Publication Date Number…
-
ASTM-A972 2010(Redline)
A972/A972M-00(2010) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles (Redline) Published By Publication Date Number…
-
ASTM-C772 2009(Redline)
C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants (Redline)…
