BS ISO 13175-3:2012:2013 Edition
$142.49
Implants for surgery. Calcium phosphates – Hydroxyapatite and beta-tricalcium phosphate bone substitutes
Published By | Publication Date | Number of Pages |
BSI | 2013 | 24 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 13175 specifies requirements for monophasic hydroxyapatite bone substitutes, monophasic β-tricalcium phosphate bone substitutes and biphasic hydroxyapatite/β-tricalcium phosphate bone substitutes in the form of blocks or granules.
This part of ISO 13175 is not applicable to cell-seeded bone void fillers, calcium phosphate cements or bone void fillers containing materials other than hydroxyapatite and β-tricalcium phosphate.
PDF Catalog
PDF Pages | PDF Title |
---|---|
6 | Foreword |
7 | Introduction |
9 | 1 Scope 2 Normative references 3 Terms, definitions and symbols 3.1 Terms and definitions |
11 | 3.2 Symbols 4 Requirements 4.1 Trace elements |
12 | 4.2 Qualitative and quantitative determination of crystalline phases |
13 | 4.3 Form and shape 4.4 Porosity |
14 | 4.5 Dissolution and pH change |
15 | 4.6 Measurement of material mechanical strength |
19 | 4.7 Test report |
21 | Bibliography |
Status | Confirmed |
---|---|
Pages | 24 |
Publication Date | 2013-04-30 |
ISBN | 978 0 580 71183 1 |
Standard Number | BS ISO 13175-3:2012 |
Title | Implants for surgery. Calcium phosphates – Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
Identical National Standard Of | ISO 13175-3:2012 |
Descriptors | Human body, Implants (surgical), Blocks, Phosphates, Calcium, Surgical instruments |
Publisher | BSI |
Committee | CH/150/1 |
ICS Codes | 11.040.40 - Implants for surgery, prosthetics and orthotics |
Related products
-
BS ISO 13145:2012
Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer Published By…
-
BS ISO 13975:2019
Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems.…
-
BS EN ISO 3175-4:2018
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS EN ISO 13174:2012:2013 Edition
Cathodic protection of harbour installations Published By Publication Date Number of Pages BSI 2013 44
-
BS 10176:2020
Taking soil samples for determination of volatile organic compounds (VOCs). Specification Published By Publication Date…
-
BS EN ISO 3175-1:1998
Textiles. Dry cleaning and finishing – Method for assessing the cleanability of textiles and garments…
-
BS EN ISO 15175:2018:2019 Edition
Soil quality. Characterization of contaminated soil related to groundwater protection Published By Publication Date Number…
-
BS ISO 13775-2:2016
Thermoplastic tubing and hoses for automotive use – Petroleum-based-fuel applications Published By Publication Date Number…
-
BS ISO 13975:2012
Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems.…
-
BS ISO 13105-2:2014+A1:2017:2018 Edition
Building construction machinery and equipment. Machinery for concrete surface floating and finishing – Safety requirements…
-
BS EN ISO 15175:2011
Soil quality. Characterization of soil related to groundwater protection Published By Publication Date Number of…
-
BS EN ISO 3175-4:2003:2009 Edition
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS EN ISO 3175-2:2018:2020 Edition
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS ISO 13775-1:2015
Thermoplastic tubing and hoses for automotive use – Non-fuel applications Published By Publication Date Number…
-
BS ISO 13105-2:2023
Building construction machinery and equipment. Machinery for concrete surface floating and finishing – Safety requirements…
-
BS EN ISO 3175-2:1998
Textiles. Dry cleaning and finishing – Procedures for tetrachloroethene Published By Publication Date Number of…
-
BS ISO 13165-3:2016
Water quality. Radium-226 – Test method using coprecipitation and gamma-spectrometry Published By Publication Date Number…
-
BS ISO 13185-3:2018
Intelligent transport systems. Vehicle interface for provisioning and support of ITS Services – Unified vehicle…
-
BS EN ISO 3175-1:2018
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Assessment of performance after…
-
BSI 15/30327562 DC:2015 Edition
BS ISO/IEC 13157-3. Information technology. Telecommunications and information exchange between systems. NFC Security. Part 3.…
-
BS ISO 13179-1:2021
Implants for surgery. Coatings on metallic surgical implants – Plasma-sprayed coatings derived from titanium or…
-
BS EN ISO 13165-2:2020
Water quality. Radium-226 – Test method using emanometry Published By Publication Date Number of Pages…
-
BS EN ISO 3175-2:2010
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS EN ISO 13165-2:2022
Water quality. Radium-226 – Test method using emanometry Published By Publication Date Number of Pages…
-
BS ISO 13715:2017
Technical product documentation. Edges of undefined shape. Indication and dimensioning Published By Publication Date Number…
-
BS EN ISO 3175-1:2010
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Assessment of performance after…
-
BS EN 13174:2001
Cathodic protection for harbour installations Published By Publication Date Number of Pages BSI 2001 28
-
BS EN ISO 3175-3:2018:2020 Edition
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS EN ISO 3175-2:2018
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS ISO 13715:2000:2004 Edition
Technical drawings. Edges of undefined shape. Vocabulary and indications Published By Publication Date Number of…
-
BS ISO 13179-1:2014
Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants – General requirements Published…
-
BS EN ISO 13165-1:2020
Water quality. Radium-226 – Test method using liquid scintillation counting Published By Publication Date Number…
-
BS EN ISO 13715:2019
Technical product documentation. Edges of undefined shape. Indication and dimensioning Published By Publication Date Number…
-
BS EN ISO 13165-3:2020
Water quality. Radium-226 – Test method using coprecipitation and gamma-spectrometry Published By Publication Date Number…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN ISO 3175-3:2018
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
BS EN ISO 3175-3:2003:2009 Edition
Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments – Procedure for testing performance…
-
BS ISO 13179-1:2021
Implants for surgery. Coatings on metallic surgical implants – Plasma-sprayed coatings derived from titanium or…
-
BS ISO 13775-1:2021
Thermoplastic tubing and hoses for automotive use – Non-fuel applications Published By Publication Date Number…