BS ISO 8640-1:2004
$167.15
Textile machinery and accessories. Flat warp knitting machines – Vocabulary of basic structure and knitting elements
Published By | Publication Date | Number of Pages |
BSI | 2004 | 42 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 8640 establishes a vocabulary of terms related to the basic structures and knitting elements of flat warp knitting machines: their types, sides and dimensions, frame, knitting elements and the driving mechanisms for those elements, units, bars and rails.
NOTE 1 The figures in this part of ISO 8640 illustrate the working principles of the various aggregates. They do not represent the only, or even the most common, arrangements. In any case, to the extent technically possible, these devices are able to be combined.
NOTE 2 In addition to terms used in English and French, two of the three official ISO languages, this part of ISO 8640 gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Status | Under Review |
---|---|
Pages | 42 |
Publication Date | 2004-09-20 |
ISBN | 0 580 44471 6 |
Standard Number | BS ISO 8640-1:2004 |
Title | Textile machinery and accessories. Flat warp knitting machines – Vocabulary of basic structure and knitting elements |
Identical National Standard Of | ISO 8640-1:2004 |
Replaces | BS ISO 8640-1:1990 |
Descriptors | Terminology, Classification systems, Knitting, Vocabulary, Textile technology, Knitting machinery, Dimensions, Warping machinery, Textile machinery and accessories, Flat (shape), Warp knitting, Warp-knitting machines, Definitions |
Publisher | BSI |
Committee | TCI/33 |
ICS Codes | 01.040.59 - Textile and leather technology (Vocabularies) |
Related products
-
BS ISO 8660:2002
Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method Published By Publication Date Number…
-
BS ISO 8600-2:2015
Endoscopes. Medical endoscopes and endotherapy devices – Particular requirements for rigid bronchoscopes Published By Publication…
-
BS ISO 8140:1991:1995 Edition
Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Rod end clevis. Mounting dimensions…
-
BS 7012-5:1988:1989 Edition
Light microscopes – Specification for connecting dimensions of tube slides and tube slots Published By…
-
BS ISO 10002:2004:2009 Edition
Quality management. Customer satisfaction. Guidelines for complaints handling in organizations Published By Publication Date Number…
-
BS EN 28340:1991
Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension Published By Publication…
-
BS ISO 8600-4:1997
Optics and optical instruments. Medical endoscopes and endoscopic accessories – Determination of maximum width of…
-
BS ISO 6640:2024
Measurement of density of water-sediment mixture using radiation transmission method Published By Publication Date Number…
-
BS ISO 8600-2:2002
Optics and optical instruments. Medical endoscopes and endoscopic accessories – Particular requirements for rigid bronchoscopes…
-
BS EN 10253-4:2008:2009 Edition
Butt-welding pipe fittings – Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements…
-
BS ISO 8600-4:2014
Endoscopes. Medical endoscopes and endotherapy devices – Determination of maximum width of insertion portion Published…
-
BS EN ISO 21647:2004:2006 Edition
Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas…
-
BS EN ISO 8340:2005
Building construction. Sealants. Determination of tensile properties at maintained extension Published By Publication Date Number…
-
BS ISO/IEC 18000-6:2004:2006 Edition
Information technology. Radio frequency identification for item management – Parameters for air interface communications at…
-
BS EN ISO 11064-2:2001
Ergonomic design of control centres – Principles for the arrangement of control suites Published By…
-
BS ISO 8600-1:1997
Optics and optical instruments. Medical endoscopes and endoscopic accessories – General requirements Published By Publication…
-
BS ISO 8140:2018
Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod-end clevises…
-
BS ISO 8642:2008
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods Published…
-
BS ISO 8643:2024
Earth-moving machinery. Hydraulic excavator and backhoe loader lowering control device. Requirements and tests Published By…
-
BS ISO 8600-4:2023
Endoscopes. Medical endoscopes and endotherapy devices – Determination of maximum width of insertion portion Published…
-
BS ISO 8600-4:2023
Endoscopes. Medical endoscopes and endotherapy devices – Determination of maximum width of insertion portion Published…
-
BS ISO 8600-4:2023
Endoscopes. Medical endoscopes and endotherapy devices – Determination of maximum width of insertion portion Published…
-
BS ISO 8600-1:2013
Endoscopes. Medical endoscopes and endotherapy devices – General requirements Published By Publication Date Number of…
-
BS EN ISO 8840:2024
Refractory materials. Determination of bulk density of granular materials (grain density) Published By Publication Date…
-
BS ISO 8140:2009
Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises Published…
-
BS ISO 8640-2:2004
Textile machinery and accessories. Flat warp knitting machines – Vocabulary of warp let-off, fabric take-up…
-
BS ISO 8600-1:2005
Optics and photonics. Medical endoscopes and endotherapy devices – General requirements Published By Publication Date…
-
BS EN ISO 8620:1996
Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus Published By Publication Date Number…
-
BS ISO 8040:2001
Optics and optical instruments. Microscopes. Dimensions of tube slide and tube slot connections Published By…
-
BS ISO 8600-6:2005
Optics and photonics. Medical endoscopes and endotherapy devices – Vocabulary Published By Publication Date Number…
-
BS ISO 8640-3:2002
Textile machinery and accessories. Flat warp knitting machines. Vocabulary – Vocabulary of patterning devices Published…
-
BS EN 10253-3:2008
Butt-welding pipe fittings – Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements…
-
BS ISO 8600-6:2020
Endoscopes. Medical endoscopes and endotherapy devices – Vocabulary Published By Publication Date Number of Pages…
-
BS ISO/IEC/IEEE 8802-1AB:2014
Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks – Station…
-
BS ISO 860:2007 2008
Terminology work. Harmonization of concepts and terms Published By Publication Date Number of Pages BSI…
-
BS ISO 8600-5:2005
Optics and photonics. Medical endoscopes and endotherapy devices – Determination of optical resolution of rigid…
-
BS EN 993-18:2002
Methods of test for dense shaped refractory products – Determination of bulk density of granular…
-
BS ISO 8641:2008
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 °C. Procurement specification Published By…
-
BS ISO 8643:2017
Earth-moving machinery. Hydraulic excavator and backhoe loader lowering control device. Requirements and tests Published By…
-
BS ISO 8600-5:2020
Optics and photonics. Medical endoscopes and endotherapy devices – Determination of optical resolution of rigid…