ASME A112.6.3 2016
$98.04
ASME A112.6.3 – 2016: Floor and Trench Drains
| Published By | Publication Date | Number of Pages |
| ASME | 2016 | 18 |
This Standard covers floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, building structures. This Standard specifies design requirements, definitions, nomenclature, outlet types and connections, grate-free area, top loading classifications, materials and finishes. Seam-welded, socket type, stainless steel fabricated drains are covered in ASME A112.3.1.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | CONTENTS |
| 5 | FOREWORD |
| 6 | A112 COMMITTEE ROSTER |
| 7 | CORRESPONDENCE WITH THE A112 COMMITTEE |
| 8 | 1 GENERAL 1.1 Scope 1.2 Alternatives 1.3 Units of Measurement 1.4 Illustrations 1.5 Reference Standards |
| 9 | 1.6 Definitions Figures Fig. 1 Area Drain Nomenclature Fig. 2 Floor Drain Nomenclature Fig. 3 Adjustable Top Floor Drain Nomenclature Fig. 4 Trench Drain Nomenclature |
| 10 | 2 GENERAL REQUIREMENTS 2.1 Materials 2.1.1 Castings. 2.1.2 Cast Iron. 2.1.3 Ductile Iron. 2.1.4 Stainless Steel. 2.1.5 Bronze. 2.1.6 Nickel-Bronze. 2.1.7 Acrylonitrile-Butadiene-Styrene. 2.1.8 Polyvinyl Chloride. 2.1.9 Polyethylene. 2.1.10 Polypropylene. 2.1.11 Bolting Materials. 2.2 Coatings 2.3 Weep Holes 2.4 Drain Body Thickness 2.5 Mating Surfaces 2.6 Caulking Areas 2.7 Trap Primers 3 BOLTS AND FASTENERS 3.1 General 3.2 Drains 3.3 Inserts for Fasteners 3.4 Threads 3.5 Tolerances 4 OUTLETS — TYPES AND CONNECTIONS 4.1 Outlet Centerlines 4.2 Outlet Connections 4.2.1 4.2.2 |
| 11 | Fig. 5 Bottom Outlet Fig. 6 Side Outlet Fig. 7 Side Outlet Integral Trap Tables Table 1 Minimum Dimensions for Threaded Outlet Connections Table 2 Minimum Dimensions for Inside Caulk (Gasket) Outlet Connections Table 3 Minimum Dimensions for Hubbed (Push-On) Outlet Connections |
| 12 | 4.3 Outlet Connection Types 4.3.1 Threaded. 4.3.2 Inside Caulk. 4.3.3 Hub Outside Caulk. 4.3.4 Spigot No-Hub. 4.3.5 Solvent Cement. 4.3.6 Gasketed Joints. 4.3.7 Buttweld. 5 TOP DIMENSIONS — GRATE-FREE AREA 5.1 Grate-Free Area Requirements 5.2 Grate Openings 5.3 Heel-Resistant Grates 6 LOADING TEST — CLASSIFICATION AND TEST PROCEDURE 6.1 Loading Classifications 6.2 Test Procedure for Grate Loading 6.2.1 Test Conditions. 6.2.2 Point of Failure. 6.2.3 Test Specimen Material Classification. 6.2.4 Safe Live Load. 7 WEATHERING TEST 7.1 Test Method Table 4 Grate-Free Area Requirements for Drains |
| 13 | 7.2 Pass/Fail Criteria 8 MARKINGS |
| 14 | NONMANDATORY APPENDIX A OPTIONAL FEATURES AND DRAIN VARIATIONS A-1 Anchor Flange A-2 Auxiliary Inlet A-3 Backwater Valve A-4 Clamping Device A-5 Dome Grate A-6 Extension A-7 Floor Cleanout A-8 Hinged Grate A-9 Secondary Strainer A-10 Sediment Bucket A-11 Trap Primer Connection |
| 15 | Fig. A-1 Optional Features Available for Use with Drains |
| 17 | How can you reach us? ItŒs easier than ever! |
