🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME BPVC III 1 NF 2019

ASME BPVC III 1 NF 2019

$377.00

ASME BPVC – III – 1 – NF -2019 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF, Supports

Published By Publication Date Number of Pages
ASME 2019 233
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This Subsection contains requirements for the material, design, fabrication, and examination of supports which are intended to conform to the requirements for Classes 1, 2, 3, and MC construction. Nuclear power plant supports for which rules are specified in this Subsection are those metal supports which are designed to transmit loads from the pressure retaining barrier of the component or piping to the load carrying building structure. In some cases there may be intervening elements in the component support load path which are not constructed to the rules of this Section, such as diesel engines, electric motors, valve operators, coolers, and access structures. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.

PDF Catalog

PDF Pages PDF Title
51 NF-1132-1 Typical Examples of Jurisdictional Boundaries Between Supports and the Building Structure
55 NF-1214-1 Typical Standard Support Units
58 NF-2121(a)-1 Material Tables Required for Supports
62 NF-2311(b)-1 Exemptions From Impact Testing Under NF-2311(b)(9) and NF-2311(b)(10) for Material Thickness to 21/2 in. (64 mm), Inclusive
63 NF-2311(b)-1 Impact Test Exemption Curves for Materials for Class 2, 3, and MC Supports
65 NF-2331(a)-1 Required Cv Lateral Expansion Values for Class 1 Support Material Other Than Bolting
NF-2331(a)-2 Required Cv Lateral Expansion Values for Class 2 and MC Support Material Other Than Bolting
NF-2331(a)-3 Required Cv Lateral Expansion Values for Class 3 Support Material Other Than Bolting
66 NF-2331(a)-4 Required Cv Energy Values for Class 1 Support Material Other Than Bolting
67 NF-2331(a)-1 Required Cv Energy Values for Class 2 and MC Support Material Other Than Bolting
68 NF-2331(a)-2 Required Cv Energy Values for Class 3 Support Material Other Than Bolting
69 NF-2333-1 Required Cv Values for Bolting Material
71 NF-2432.1-1 Sampling of Welding Materials for Chemical Analysis
72 NF-2432.2(a)-1 Welding Material Chemical Analysis
73 NF-2433.1-1 Delta Ferrite Content
78 NF-3131(a)-1 Reference Paragraphs for Procedures for Design of Component Supports, Piping Supports, and Standard Supports
80 NF-3221.2-1 Elastic Analysis Stress Categories and Stress Limit Factors for Class 1 Plate‐ and Shell‐Type Supports Designed by Analysis
82 NF-3225.2-1 Stress Limit Factors for Class 1, 2, 3, and MC Bolt Design by Analysis
83 NF-3226.1-1 Permissible Welded Joints for Class 1 Plate‐ and Shell‐Type Supports
84 NF-3226.1(a)-1 Typical Weld Details Referenced
85 NF-3226.1(a)-2 Butt Welding of Plates of Unequal Thickness
87 NF-3251.2-1 Elastic Analysis Stress Categories and Stress Limit Factors for Class 2, 3, and MC Plate‐ and Shell‐Type Supports Designed by Analysis
88 NF-3256.1-1 Permissible Welded Joints for Class 2, 3, and MC Plate‐ and Shell‐Type Supports
92 NF-3312.1(b)-1 Elastic Analysis Stress Categories and Stress Limit Factors for Class 1, 2, 3, and MC Linear-Type Supports Designed by Analysis
102 NF-3322.2(e)(2)-1 Limiting Proportions for Channels and Tees
111 NF-3324.1(a)(1) Typical Friction‐Type Connections Using High-Strength Bolts
113 NF-3324.5(a)-1 Allowable Stress Limits for Class 1 Linear‐Type Support Welds
115 NF-3324.6(a)(4)-1 Effective Slip Coefficient Versus Surface Condition
116 NF-3324.6(b)(1)-1 Minimum Edge Distances From Center of Standard Hole
117 NF-3332.2-1 Classification of Loading Conditions
118 NF-3332.3-1 Stress Categories
121 NF-3332.3-1 Illustrative Examples
123 NF-3332.4-1 Allowable Stress Ranges
129 NF-3426.1-1 Additional Permissible Welded Joints for Class 1 Standard Supports
131 NF-3611-1 Suggested Piping Support Spacing
132 NF-3626(a)-1 Additional Permissible Welded Joints for Class 1 Piping Supports
136 NF-4232-1 Maximum Allowable Offset in Final Butt-Welded Joints
141 NF-4427-1 Fillet Weld Dimensions
142 NF-4441-1 Weld Joint Producing Through‐Thickness Loading
144 NF-4622.1-1 Mandatory Requirements for Postweld Heat Treatment (PWHT) of Welds
145 NF-4622.4(c)-1 Alternative Holding Temperatures and Times
146 NF-4622.7(b)-1 Exemptions to Mandatory PWHT
147 NF-4622.7(b)-2 Additional Exemptions to Mandatory PWHT
149 NF-4721(a)-1 Bolt Hole Sizes
NF-4721(b)-1 Tolerances on Oversized Holes
160 NF-I-2100-1 Design Stress Intensity (Sm), Maximum Allowable Stress (S), Yield Strength (Sy), and Tensile Strength (Su) Values
177 NF-I-2100-1M Design Stress Intensity (Sm), Maximum Allowable Stress (S), Yield Strength (Sy), and Tensile Strength (Su) Values
191 NF-I-2100-2 ASTM Specifications
198 NF-II-3510 Equal Leg Single Angle Limits for Fb = 0.66Sy
199 NF-II-3532-1 Bw Values for Angles
206 NF-A-1311
211 NF-B-2400-1 Effective Length Factor for Various End Conditions
212 NF-B-2400-2 Alignment Chart for Effective Length of Columns in Continuous Frames
214 NF-B-4000 Factors of Safety for a Material With a Low Value of Su/Sy Ratio
220 NF-C-4000 Design Basis for Linear‐Type Supports
223 NF-D-1320-1 Clamp Tolerances
224 NF-D-1330-1 Local Installation Tolerances for Supports

Related products

ASME BPVC III 1 NF 2019
$377.00