BS 4200-3:1979
$102.76
Guide on the reliability of electronic equipment and parts used therein – Presentation of reliability data on electronic components (or parts)
| Published By | Publication Date | Number of Pages |
| BSI | 1979 | 20 |
Guidance for presenting data necessary to distinguish the reliability characteristics of a component. Failure data, characteristic changes and information obtained from reliability tests are typical source material.
Related products
-
BS 1127:1974:1979 Edition
Specification for circular machine screwing dies, hand screwing dies and hexagon dienuts Published By Publication…
-
BS AU 50-1.3.2a:1991
Specification for tyres and wheels. Tyres. Off-the-road tyres – Specification for narrow and wide base…
-
BS EN 573-3:1995
Aluminium and aluminium alloys. Chemical composition and form of wrought products – Chemical composition Published…
-
BS CECC 42100:1978
Harmonized system of quality assessment for electronic components: sectional specification: low voltage varistors primarily for…
-
BS AU 50-1.3.1a:1991
Specification for tyres and wheels. Tyres. Off-the-road tyres – Specification for narrow and wide base…
-
BS 4794-2 Sections 2.3 and 2.4:1977
Specification for control switches (switching devices, including contactor relays, for control and auxiliary circuits, for…
-
BS 3600:1976
Specification for dimensions and masses per unit length of welded and seamless steel pipes and…
-
BS EN ISO 4600:1998:1993 Edition
Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method Published By Publication…
-
BS EN 755-6:1996
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles – Hexagonal bars, tolerances on dimensions…
-
BS 4794-2 Sections 2.5 and 2.6:1978
Specification for control switches (switching devices, including contactor relays, for control and auxiliary circuits, for…
-
BS 328-5:1983
Drills and reamers – Specification for the dimensions of countersinks and counterbores Published By Publication…
-
BS 5486-12:1979
Specification for factory-built assemblies of switchgear and controlgear for voltages up to and including 1000…
-
BS EN 755-5:1996
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles – Rectangular bars, tolerances on dimensions…
-
BS 5486-11:1979
Specification for factory-built assemblies of switchgear and controlgear for voltages up to and including 1000…
-
BS EN 515:1993
Aluminium and aluminium alloys. Wrought products. Temper designations Published By Publication Date Number of Pages…
-
BS 4210-3:1977
Specification for 35 mm microcopying of technical drawings – Unitized microfilm carriers Published By Publication…
-
BS 1127-2:1990
Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies for taper…
-
BS 4941-3:1977
Specification for motor starters for voltages up to and including 1000 V a.c. and 1200…
-
BS 4300/4:1973
Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) – 6463 Solid extruded…
-
BS 5760-1:1985
Reliability of systems, equipment and components – Guide to reliability and maintainability programme management Published…
-
BS 5412:1996
Specification for low-resistance single taps and combination tap assemblies (nominal size ½ and ¾) suitable…
-
BS EN 755-4:1996
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles – Square bars, tolerances on dimensions…
-
BS 4794-2-2.2:1977
Specification for control switches (switching devices, including contactor relays, for control and auxiliary circuits, for…
-
BS ISO/IEC 9496:1989:1991 Edition
CCITT high level language (CHILL) Published By Publication Date Number of Pages BSI 1991 264
-
BS 4778-3.1:1991
Quality vocabulary. Availability, reliability and maintainability terms – Guide to concepts and related definitions Published…
-
BS TA 48:1973
Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm2) (limiting ruling section 100 mm)…
-
BS 4500-3:1973
ISO limits and fits – Working limits on untoleranced dimensions Published By Publication Date Number…
-
BS EN 755-2:1997
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles – Mechanical properties Published By Publication…
-
BS 1660-6:1988
Machine tapers – Specification for adaptors with external 7/24 tapers for tools with Morse taper…
-
BS EN 755-9:2001
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles – Profiles, tolerances on dimensions and…
-
BS 5486-13:1979:1984 Edition
Specification for factory-built assemblies of switchgear and controlgear for voltages up to and including 1000…
-
BS EN 754-2:1997
Aluminium and aluminium alloys. Cold drawn rod/bar and tube – Mechanical properties Published By Publication…
-
BS 2021:1980
Specification for separating and dropping funnels for laboratory use Published By Publication Date Number of…
-
BS 4778-3.2:1991:2002 Edition
Quality vocabulary. Availability, reliability and maintainability terms – Glossary of international terms – 3.2 glossay…
-
BS 5620:1979
Specification for 200 A flameproof restrained and bolted plugs and sockets for voltages not exceeding…
-
BS EN 755-3:1996
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles – Round bars, tolerances on dimensions…
-
BS 4794-1:1979:1982 Edition
Specification for control switches (switching devices, including contactor relays, for control and auxiliary circuits, for…
-
BS 5379:1976
Determination of the sulphur content of petroleum products by the Wickbold combustion method Published By…
-
BS 4794-2-2.1:1977
Specification for control switches (switching devices, including contactor relays, for control and auxiliary circuits, for…
-
BS 3307:1978
Specification for photographic grade potassium bromide Published By Publication Date Number of Pages BSI 1978…
