BSI PAS 2030:2012 Edition 2:2013 Edition
$51.38
Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
Published By | Publication Date | Number of Pages |
BSI | 2013 | 157 |
PDF Catalog
PDF Pages | PDF Title |
---|---|
3 | Contents |
5 | Foreword |
7 | Introduction |
9 | 1 Scope 2 Normative references |
10 | 3 Terms and definitions |
12 | 4 Installation process 4.1 Method statement 4.2 Energy efficiency measure design specification 4.3 Installation location information |
13 | 4.4 Installation methods 4.5 Installation equipment and tools 4.6 Checking, handling and storage |
14 | 4.7 Provision of installation instructions to operatives 4.8 Intermediate inspections 4.9 People 4.10 Engagement of subcontract installers 4.11 Commissioning |
15 | 4.12 Handover 4.13 Installation control 4.14 Installation documents and record keeping |
16 | 5 Installation process management 5.1 Operation and process oversight 5.2 Pre-installation survey 5.3 Action in respect of Intermediate inspection 5.4 Installation process change |
17 | 5.5 Process continuity plan 5.6 Process control 5.7 Internal audit and corrective action 5.8 Installation process records 5.9 Business and financial probity |
18 | 6 Service provision 6.1 Complaints procedure 6.2 Interaction with customers 7 Claims of conformity 7.1 General claims requirement 7.2 Declarations of conformity |
19 | 8 Documents essential to the application of the Annexes of this PAS 8.1 Use of the identified documents 8.2 British Standards |
20 | 8.3 Institution of Gas Engineer and Managers – Standards 8.4 Energy Networks Association Engineering Recommendations 8.5 UKLPG 8.6 Department of Communities and Local Government 8.7 CITB constructionskills |
21 | 8.8 Common Minimum Technical Competence Annexes |
22 | Annex A (normative) Energy efficiency measures and types with current and historic PAS 2030 annex references, arranged by measure category |
26 | Annex B BFM energy efficiency measures B1 Measure BFM.1 Cavity wall insulation |
30 | B2 Measure BFM.2 Draught proofing |
34 | B3 Measure BFM.3 – Energy efficient glazing and doors |
38 | B4 Measure BFM.4 – External wall insulation |
43 | B5 Measure BFM.5 Flat roof insulation |
48 | B6 Measure BFM.6 Floor insulation |
53 | B7 Measure BFM 7 Hybrid wall insulation |
58 | B8 Measure BFM.8 Internal wall insulation |
63 | B9 Measure BFM.9 Loft insulation |
67 | B10 Measure BFM.10 Pitched roof insulation |
72 | B11 Measure BFM.11: Solar Blinds, Shutters and Shading Devices (internal and external) |
77 | Annex C BFM energy efficiency measures (normative) C1 Measure BSM.1 Chillers |
82 | C2 Measure BSM.2 Condensing boilers, natural gas-fired and liquefied petroleum gas-fired (domestic and non-domestic) |
88 | C3 Measure BSM.3 oil-fired condensing boilers |
94 | C4 Measure BSM.4 Flue-gas heat recovery devices |
99 | C5 Measure BSM.5: Heating system insulation (ducting, pipes and cylinders) |
103 | C6 Measure BSM.6 Heating, hot water system, air conditioning and ventilation controls |
109 | C7 Measure BSM.7 Hot water systems |
115 | C8 BSM.8 Mechanical Ventilation and Heat Recovery |
120 | C9 Measure BSM.9 Radiant heating (non-domestic) |
126 | C10 Measure BSM.10.1 Under-floor heating |
132 | C11 Measure BSM.11 Warm-air heating systems (domestic and non-domestic) |
139 | C12 BSM.12 Water efficient taps and showers |
144 | Annex D BSE energy efficiency measures (normative) D1 Measure BSE.1 Electric storage heaters (including electric warm air heating units thatincorporate heat storage) |
149 | D2 Measure BSE.2 Lighting fittings, lighting systems and lighting system controls |
153 | D3 Measure BSE.3 Variable speed drives for fans and pumps |