IEEE 515 1990
$45.50
IEEE Recommended Practice for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications
| Published By | Publication Date | Number of Pages |
| IEEE | 1990 | 42 |
Revision Standard – Inactive – Superseded. Superseded by 515-1997, 515-2004. The specific test requirements for qualifying electrical resistance heating cables for industrial service are provided, as well as the basis for electrical and thermal design. Heating device characteristics are addressed, and installation and maintenance requirements are detailed. Heating cable and surface heating device application recommendations and requirements are made for ordinary (unclassified) and hazardous (classified) potentially flammable atmospheres and locations.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 8 | 1 Scope 2 Purpose 3 Definitions |
| 9 | 4 References |
| 10 | 5 General Product Testing 5.1 Type Test – General Purpose/Ordinary Locations |
| 11 | Cold Bend Test Apparatus |
| 12 | Heating Cable Termination Test Apparatus |
| 13 | Verification of Rated Output |
| 14 | Type Test – Classified Locations – Class I Division 2 (CID2) |
| 15 | Verification of Sheath Temperature Using System Approach Maximum Sheath Temperature Using Product Classification Approach |
| 16 | Type Test-Classified Locations-Class I Division 1 (CID1) |
| 17 | 5.4 RoutineTests Flammability Test |
| 18 | 6 Design 6.1 Process Considerations 6.2 EnvironmentaVSite Considerations 6.3 Thermal Insulation and Heat-Loss Considerations |
| 19 | Thermal Insulation Weather-Barrier Installation |
| 21 | Maximum Temperature Determination |
| 22 | 6.5 Design Information |
| 23 | 6.6 Power System |
| 24 | 6.7 Special Considerations Typical Power Distribution System for Electrical Heat Tracing |
| 25 | Fig9 TankExample Fig 10 Bypass Example |
| 26 | Control and Monitoring |
| 27 | Fig 11 Typical Double-Insulation Application |
| 29 | Class I Division 1 (CID1) Design Considerations 7 Installation Receiving and Storage of Materials |
| 30 | Scheduling of Installation 7.3 Cable Installation Special Class I Division 1 (CID1) Installation Considerations |
| 31 | Controls and Sensors Cable Testing After Installation 7.7 Thermal Insulation -Recommendations |
| 32 | 7.8 Functional Check and Field Documentation – Recommendations 8 Maintenance General Maintenance Requirements 8.2 Visual Inspection Periodic Operational Check |
| 33 | 8.4 Record Keeping 9 Bibliography |
| 34 | Heat-Loss Considerations A1 Heat-Loss Formula and Example Calculations |
| 36 | Assumed Temperature Gradients |
| 37 | A2 Bibliography |
| 38 | Appendix B Heat-Up Considerations |
| 39 | Method to Determine Equivalent Thicknesses of Insulating Cements Appendix C |
| 40 | CID1 Checklist Appendix D |
| 41 | Appendix E Heat-Tracing System Log Sheet Example |
Related products
-
IEEE 82 1994
IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors Published By Publication Dateā¦
-
IEEE 140 1950
IEEE Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment Published By Publication Dateā¦
-
IEEE 1320.1 1998
IEEE Standard for Functional Modeling Language – Syntax and Semantics for IDEF0 Published By Publicationā¦
-
IEEE C57.12.00-1993
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers Published By Publication Dateā¦
-
IEEE 1482.1 1999
IEEE Standard for Rail Transit Vehicle Event Recorders Published By Publication Date Number of Pagesā¦
-
IEEE 1275.1 1994
IEEE Standard for Boot (Initialization Configuration) Firmware: Instruction Set Architecture (ISA) Supplement for IEEE 1754ā¦
-
IEEE 515-1997
IEEE Standard for the Testing, Design, Installation and Maintenance of Electrical Resistance Heat Tracing forā¦
-
IEEE 1036 1993
IEEE Guide for Application of Shunt Power Capacitors Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.44-1994
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEEā¦
-
IEEE 400 1991
IEEE Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the Field Published Byā¦
-
IEEE C135.61-1997
IEEE Standard for the Testing of Overhead Transmission and Distribution Line Hardware Published By Publicationā¦
-
IEEE 525 1993
IEEE Guide for the Design and Installation of Cable Systems in Substations Published By Publicationā¦
-
IEEE 1101.1-1991
IEEE Standard for Mechanical Core Specifications for Microcomputers Using IEC 603-2 Connectors Published By Publicationā¦
-
IEEE 516 1995
IEEE Guide for Maintenance Methods on Energized Power Lines Published By Publication Date Number ofā¦
-
IEEE 515 1997
IEEE Standard for the Testing, Design, Installation and Maintenance of Electrical Resistance Heat Tracing forā¦
-
IEEE C62.1 1990
IEEE Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits Published By Publication Dateā¦
-
IEEE 115 1996
(Superseded) IEEE Guide: Test Procedures for Synchronous Machines Part I–Acceptance and Performance Testing Part II-Testā¦
-
IEEE STD C62.1 1989:1990 Edition
IEEE Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits Published By Publication Dateā¦
-
IEEE 1517 1999
IEEE Standard for Information Technology – Software Life Cycle Processes – Reuse Processes Published Byā¦
-
IEEE 1101.1 1992
IEEE Standard for Mechanical Core Specifications for Microcomputers Using IEC 603-2 Connectors Published By Publicationā¦
-
IEEE C57.12.44 1994
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEEā¦
-
IEEE C57.12.00 1993
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers Published By Publication Dateā¦
-
IEEE 155 1960
IEEE Standards on Circuits: Definitions of Terms for Linear Signal Flow Graphs, 1960 Published Byā¦
-
IEEE 155-1960
IEEE Standards on Circuits: Definitions of Terms for Linear Signal Flow Graphs, 1960 Published Byā¦
-
IEEE 1017-1991
IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable Published By Publication Date Numberā¦
-
IEEE 82-1994
IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors Published By Publication Dateā¦
-
IEEE C135.20 1998
IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction Published By Publication Dateā¦
-
IEEE 1214 1993
IEEE Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear Spectroscopy Published By Publicationā¦
-
IEEE 140-1950
IEEE Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment Published By Publication Dateā¦
-
IEEE C37.111 1999
IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems Published By Publicationā¦
-
IEEE 519 1993
IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems Published By Publicationā¦
-
IEEE C135.61 1998
IEEE Standard for the Testing of Overhead Transmission and Distribution Line Hardware Published By Publicationā¦
-
IEEE 1017 1992
IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable Published By Publication Date Numberā¦
-
IEEE 155-1960
IEEE Standards on Circuits: Definitions of Terms for Linear Signal Flow Graphs, 1960 Published Byā¦
-
IEEE 82-1994
IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors Published By Publication Dateā¦
-
IEEE C62.23 1995
IEEE Application Guide for Surge Protection of Electric Generating Plants Published By Publication Date Numberā¦
-
IEEE 1482.1-1999
IEEE Standard for Rail Transit Vehicle Event Recorders Published By Publication Date Number of Pagesā¦
-
IEEE 1145 1990
IEEE Recommended Practice for Installation and Maintenance of Nickel-Cadmium Batteries for Photovoltaic (PV) Systems Publishedā¦
-
IEEE 115-1995
IEEE Guide: Test Procedures for Synchronous Machines Part I–Acceptance and Performance Testing Part II-Test Proceduresā¦
-
IEEE 115-1995
IEEE Guide: Test Procedures for Synchronous Machines Part I–Acceptance and Performance Testing Part II-Test Proceduresā¦
