ISO 15223-1:2016
$46.15
Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements
Published By | Publication Date | Number of Pages |
ISO | 2016-11 | 32 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ISO 15223-1:2016 identifies requirements for symbols used in medical device labelling that convey information on the safe and effective use of medical devices. It also lists symbols that satisfy the requirements of this document.
ISO 15223-1:2016 is applicable to symbols used in a broad spectrum of medical devices, which are marketed globally and therefore need to meet different regulatory requirements.
These symbols may be used on the medical device itself, on its packaging or in the associated documentation. The requirements of this document are not intended to apply to symbols specified in other standards.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2016-11 |
Pages Count | 32 |
Language | English |
Edition | 3 |
File Size | 716.8 KB |
ICS Codes | 11.040.01 - Medical equipment in general |
Related products
-
BS 6219:1996:2000 Edition
Test sieves for cereals Published By Publication Date Number of Pages BSI 2000 10
-
ISO 15223-1:2012
Medical devices — Symbols to be used with medical device labels, labelling and information to…
-
BS EN ISO 1522:2022
Paints and varnishes. Pendulum damping test Published By Publication Date Number of Pages BSI 2022…
-
BS EN ISO 19223:2021
Lung ventilators and related equipment. Vocabulary and semantics Published By Publication Date Number of Pages…
-
BS ISO 15222:2011
Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres Published…
-
BS ISO 14223-1:2011
Radiofrequency identification of animals. Advanced transponders – Air interface Published By Publication Date Number of…
-
AAMI 15223 2 2010 RA 2016
ANSI/AAMI/ISO 15223-2:2010/(R)2016 – Medical devices – Symbols to be used with medical device labels, labeling,…
-
BS EN ISO 15023-2:2019
Plastics. Poly(vinyl alcohol) (PVAL) materials – Determination of properties Published By Publication Date Number of…
-
BS EN ISO 5223:2015:2016 Edition
Test sieves for cereals Published By Publication Date Number of Pages BSI 2016 20
-
BSI DD CEN/TS 15224:2005:2006 Edition
Health services. Quality management systems. Guide for the use of EN ISO 9001:2000 Published By…
-
BSI 19/30401046 DC:2019 Edition
BS EN ISO 15223-1 AMD1. Medical devices. Symbols to be used with medical device labels,…
-
BS EN ISO 17351:2014
Packaging. Braille on packaging for medicinal products Published By Publication Date Number of Pages BSI…
-
ISO 15923-1:2013
Qualité de l’eau — Détermination de paramètres sélectionnés par des systèmes d’analyse discrète — Partie…
-
BS EN 15224:2016:2017 Edition
Quality management systems. EN ISO 9001:2015 for healthcare Published By Publication Date Number of Pages…
-
BS EN ISO 15023-1:2006
Plastics. Poly(vinyl alcohol) (PVAL) materials – Designation system and basis for specifications Published By Publication…
-
BS ISO 15243:2017
Rolling bearings. Damage and failures. Terms, characteristics and causes Published By Publication Date Number of…
-
BS EN ISO/IEC 15423:2005:2006 Edition
Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing…
-
BS EN ISO/IEC 15423:2010:2011 Edition
Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing…
-
BS EN 15224:2012
Health care services. Quality management systems. Requirements based on EN ISO 9001:2008 Published By Publication…
-
BS EN ISO 1522:2006:2007 Edition
Paints and varnishes. Pendulum damping test Published By Publication Date Number of Pages BSI 2007…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN ISO 15223-1:2021 – TC:2022 Edition
Tracked Changes. Medical devices. Symbols to be used with information to be supplied by the…
-
BS EN ISO 15023-2:2006
Plastics. Poly(vinyl alcohol) (PVAL) materials – Determination of properties Published By Publication Date Number of…
-
BS EN ISO 19223:2021
Lung ventilators and related equipment. Vocabulary and semantics Published By Publication Date Number of Pages…
-
BS ISO/IEC 15423:2004
Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing…
-
BS ISO 15243:2004
Rolling bearings. Damage and failures. Terms, characteristics and causes Published By Publication Date Number of…
-
BS EN ISO/IEC 15423:2010:2011 Edition
Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing…
-
BS EN ISO 15223-1:2021
Medical devices. Symbols to be used with information to be supplied by the manufacturer –…
-
BSI PD CEN/TR 17608:2022
State of the art on the use of flammable refrigerant alternatives, in particular from class…
-
BS EN 15221-1:2006:2007 Edition
Facility management – Terms and definitions Published By Publication Date Number of Pages BSI 2007…
-
BS EN ISO 15023-1:2017
Plastics. Poly(vinyl alcohol) (PVAL) materials – Designation system and basis for specifications Published By Publication…
-
BS EN ISO 15023-2:2019 – TC:2020 Edition
Tracked Changes. Plastics. Poly(vinyl alcohol) (PVAL) materials – Determination of properties Published By Publication Date…
-
AAMI 15223 1 2016
ANSI/AAMI/ISO 15223-1:2016 – Medical devices – Symbols to be used with medical device labels, labelling…
-
ISO 14223-1:2011
Radiofrequency identification of animals — Advanced transponders — Part 1: Air interface Published By Publication…
-
BS EN ISO 15223-1:2021
Medical devices. Symbols to be used with information to be supplied by the manufacturer –…
-
BS EN ISO 15923-1:2024
Water quality. Determination of selected parameters by discrete analysis systems – Ammonium, nitrate, nitrite, chloride,…
-
BS EN 15823:2010
Packaging. Braille on packaging for medicinal products Published By Publication Date Number of Pages BSI…
-
ISO 15023-1:2017
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications…
-
BS EN 15221-2:2006
Facility management – Guidance on how to prepare facility management agreements Published By Publication Date…
-
BS ISO 15923-1:2013
Water quality. Determination of selected parameters by discrete analysis systems – Ammonium, nitrate, nitrite, chloride,…