UOP 905-08:2008 Edition
$59.15
Platinum Agglomeration by X-Ray Diffraction
Published By | Publication Date | Number of Pages |
UOP | 2008-07-14 | 12 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
Full Description
This method is for determining the extent of platinum agglomeration in reforming catalysts, i.e., the fraction of the platinum in the sample that has agglomerated into crystallites larger than 3.5 nm, using X-ray diffraction. These materials generally contain between 0.2 to 0.4 mass-% platinum on predominantly gamma-alumina support. This method can also be used for qualitatively determining the alumina types present in the sample.
Catalyst samples may be either fresh, spent or regenerated, as typical levels of carbon, sulfur and moisture associated with these samples do not interfere. Reforming catalysts containing less than 2% zeolitic materials may also be analyzed. Samples where the platinum has formed an alloy with other metals such as tin, rhodium, rhenium or iron cannot be analyzed by this method.
Published Code | UOP |
---|---|
Published By | Honeywell UOP, formerly Universal Oil Products (UOP LLC) |
Publication Date | 2008-07-14 |
Pages Count | 12 |
Language | English |
File Size | 471.0 KB |
Related products
-
CA LACountyy BuildingCode Vol1and2 2017
County of Los Angeles Building Code – Los Angeles County Code Title 26 Published By…
-
AS/NZS 4230.5:1999
Information technology – Coding of moving pictures and associated audio for digital storage media at…
-
ESDU 03006:2003
Subsonic drag and pressure recovery of rectangular planform flush auxiliary inlets with ducts at angles…
-
BS ISO 730:2009+A1:2014
Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and…
-
ASTM-C1440:2008 Edition(Redline)
C1440-08 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV),…
-
DIN EN ISO 1179-3:2008 Edition
Connections for general use and fluid power – Ports and stud ends with ISO 228-1…
-
FEMA Earthquakes P 1000 SaferStrongerSmarteraGuidet 2017
FEMA Earthquakes P-1000, Safer Stronger Smarter a Guide to Improving School Natural Hazard Safety Published…
-
OH OhioFireCode 2ndEdition 2011
Ohio Fire Code, 2nd Edition Published By Publication Date Number of Pages OH 2011 764
-
BS EN 50288-4-2:2001
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened…
-
CA GreenBuildingStandardsCode 2019
California Green Building Standards Code, Title 24, Part 11 (W/ ERRATA & SUPPLEMENT) Published By…
-
ASME A17.1 2013 w ERRATA 0121
ASME A17.1 / CSA B44 – 2013 Safety Code for Elevators and Escalators with February…
-
BS EN 61347-1:2015
Lamp controlgear – General and safety requirements Published By Publication Date Number of Pages BSI…
-
BS EN 16602-30-11:2021 – TC:2022 Edition
Tracked Changes. Space product assurance. Derating. EEE components Published By Publication Date Number of Pages…
-
IEC 61238-1-2:2018
Compression and mechanical connectors for power cables – Part 1-2: Test methods and requirements for…
-
DIN SPEC 74109:2015 Edition
Road vehicles – R744-Air-conditioning systems – Serviceport Published By Publication Date Number of Pages DIN…
-
BS ISO 11119-2:2020+A1:2023
Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes – Fully…
-
BS EN 4199-003:2009
Aerospace series. Bonding straps for aircraft – Bonding strap assemblies with flat braided conductor copper,…
-
SAE AS 6446:2011
Fitting Assembly, Tee, Axially Swaged on the Run, Internal Port End on the Side, Hydraulic,…
-
SAE AS 6192:2011
Fitting Assembly, Elbow, 90°, Axially Swaged, Female Flareless, Hydraulic, up to 1500 psi Published By…
-
BSI 24/30485509 DC 2024
BS EN 16605 Space – Galileo Timing Receiver – Functional and Performance Requirements and associated…
-
CA LosAngelesCity BuildingCode Volume1and2 2017
City of Los Angeles Building Code – Volume 1 & 2 Published By Publication Date…
-
MN MinnesotaFireCode 2015
Minnesota Fire Code Published By Publication Date Number of Pages MN 2015 586
-
AS/NZS 3629.3:2013
Methods of testing child restraints – Dynamic testing of upper anchorage components and top tether…
-
ICC StructuralHandbook 2009.pdf
2009 IBC Handbook: Structural Provisions Published By Publication Date Number of Pages ICC 2009 702
-
ASTM-A672 2008
A672-08 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures Published By…
-
BS ISO 11119-2:2020
Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes – Fully…
-
ASTM-F1973:2008 Edition(Redline)
F1973-08 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
OH OhioFireCode 2017
Ohio Fire Code with January 2019 Errata Published By Publication Date Number of Pages OH…
-
BS EN 50482:2008
Instrument transformers. Three-phase inductive voltage transformers having Um up to 52kV Published By Publication Date…
-
BS EN IEC 61238-1-3:2019+A11:2019
Compression and mechanical connectors for power cables – Test methods and requirements for compression and…
-
BS EN IEC 61238-1-3:2019+A11:2019
Compression and mechanical connectors for power cables – Test methods and requirements for compression and…
-
USACE EM 385 1 1 2014
EM 385-1-1, Safety and Health Requirements Manual Published By Publication Date Number of Pages USACE…
-
BS EN IEC 61238-1-3:2019+A11:2019
Compression and mechanical connectors for power cables – Test methods and requirements for compression and…
-
DOT MUTCD 2023 11ed
FHWA Manual on Uniform Traffic Control Devices (MUTCD), 11th Edition Published By Publication Date Number…
-
BS EN 60335-2-5:2003+A12:2012:2013 Edition
Household and similar electrical appliances. Safety – Particular requirements for dishwashers Published By Publication Date…
-
IEC 61076-2-109:2014
Connectors for electronic equipment – Product requirements – Part 2-109: Circular connectors – Detail specification…
-
BS EN 61703:2016 – TC:2020 Edition
Tracked Changes. Mathematical expressions for reliability, availability, maintainability and maintenance support terms Published By Publication…
-
ASTM-B86 2008
B86-08 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings Published By…
-
BS EN IEC 61158-4-19:2019 – TC:2020 Edition
Tracked Changes. Industrial communication networks. Fieldbus specifications – Data-link layer protocol specification. Type 19 elements…
-
Ohio Fire Code 2017
Ohio Fire Code Published By Publication Date Number of Pages OH 2017 677