{"id":191356,"date":"2024-10-19T12:05:50","date_gmt":"2024-10-19T12:05:50","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/asme-bpvc-viii-1-2019\/"},"modified":"2024-10-25T04:33:39","modified_gmt":"2024-10-25T04:33:39","slug":"asme-bpvc-viii-1-2019","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/asme\/asme-bpvc-viii-1-2019\/","title":{"rendered":"ASME BPVC VIII 1 2019"},"content":{"rendered":"

This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such pressure vessels may be fired or unfired. Specific requirements apply to several classes of material used in pressure vessel construction, and also to fabrication methods such as welding, forging and brazing. It contains mandatory and nonmandatory appendices detailing supplementary design criteria, nondestructive examination and inspection acceptance standards. Rules pertaining to the use of the U, UM and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.<\/p>\n

PDF Catalog<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
PDF Pages<\/th>\nPDF Title<\/th>\n<\/tr>\n
83<\/td>\nU-3 Year of Acceptable Edition of Referenced Standards in This Division <\/td>\n<\/tr>\n
84<\/td>\nU-4-1 Standard Units for Use in Equations <\/td>\n<\/tr>\n
98<\/td>\nUG-28 Diagrammatic Representation of Variables for Design of Cylindrical Vessels Subjected to External Pressure <\/td>\n<\/tr>\n
99<\/td>\nUG-28.1 Diagrammatic Representation of Lines of Support for Design of Cylindrical Vessels Subjected to External Pressure <\/td>\n<\/tr>\n
103<\/td>\nUG-29.1 Various Arrangements of Stiffening Rings for Cylindrical Vessels Subjected to External Pressure <\/td>\n<\/tr>\n
104<\/td>\nUG-29.2 Maximum Arc of Shell Left Unsupported Because of Gap in Stiffening Ring of Cylindrical Shell Under External Pressure <\/td>\n<\/tr>\n
106<\/td>\nUG-30 Some Acceptable Methods of Attaching Stiffening Rings <\/td>\n<\/tr>\n
109<\/td>\nUG-33.1 Length Lc of Some Typical Conical Sections for External Pressure
UG-33.1 Values of Spherical Radius Factor Ko for Ellipsoidal Head With Pressure on Convex Side <\/td>\n<\/tr>\n
112<\/td>\nUG-34 Some Acceptable Types of Unstayed Flat Heads and Covers <\/td>\n<\/tr>\n
117<\/td>\nUG-36 Large Head Openings \u2014 Reverse-Curve and Conical Shell-Reducer Sections <\/td>\n<\/tr>\n
120<\/td>\nUG-37 Chart for Determining Value of F, as Required in UG-37 <\/td>\n<\/tr>\n
121<\/td>\nUG-37.1 Nomenclature and Formulas for Reinforced Openings <\/td>\n<\/tr>\n
122<\/td>\nUG-38 Minimum Depth for Flange of Flued\u2010In Openings
UG-37 Values of Spherical Radius Factor K1 <\/td>\n<\/tr>\n
124<\/td>\nUG-39 Openings in Flat Heads and Covers <\/td>\n<\/tr>\n
126<\/td>\nUG-40 Some Representative Configurations Describing the Reinforcement Dimension te and the Opening Dimension d <\/td>\n<\/tr>\n
129<\/td>\nUG-41.1 Nozzle Attachment Weld Loads and Weld Strength Paths to Be Considered <\/td>\n<\/tr>\n
131<\/td>\nUG-42 Examples of Multiple Openings
UG-43 Minimum Number of Pipe Threads for Connections <\/td>\n<\/tr>\n
133<\/td>\nUG-44-1 Moment Factor, FM <\/td>\n<\/tr>\n
134<\/td>\nUG-45 Nozzle Minimum Thickness Requirements <\/td>\n<\/tr>\n
135<\/td>\nUG-47 Acceptable Proportions for Ends of Stays <\/td>\n<\/tr>\n
137<\/td>\nUG-53.1 Example of Tube Spacing With Pitch of Holes Equal in Every Row
UG-53.2 Example of Tube Spacing With Pitch of Holes Unequal in Every Second Row <\/td>\n<\/tr>\n
138<\/td>\nUG-53.3 Example of Tube Spacing With Pitch of Holes Varying in Every Second and Third Row
UG-53.4 Example of Tube Spacing With Tube Holes on Diagonal Lines <\/td>\n<\/tr>\n
139<\/td>\nUG-53.5 Diagram for Determining the Efficiency of Longitudinal and Diagonal Ligaments Between Openings in Cylindrical Shells <\/td>\n<\/tr>\n
140<\/td>\nUG-53.6 Diagram for Determining Equivalent Longitudinal Efficiency of Diagonal Ligaments Between Openings in Cylindrical Shells <\/td>\n<\/tr>\n
141<\/td>\nUG-79-1 Equations for Calculating Forming Strains <\/td>\n<\/tr>\n
143<\/td>\nUG-80.1 Maximum Permissible Deviation From a Circular Form e for Vessels Under External Pressure
UG-80.2 Example of Differences Between Maximum and Minimum Inside Diameters in Cylindrical, Conical, and Spherical Shells <\/td>\n<\/tr>\n
144<\/td>\nUG-84 Simple Beam Impact Test Specimens (Charpy Type Test) <\/td>\n<\/tr>\n
146<\/td>\nUG-84.1 Charpy V\u2010Notch Impact Test Requirements for Full-Size Specimens for Carbon and Low Alloy Steels, Having a Specified Minimum Tensile Strength of Less Than 95 ksi, Listed in Table UCS-23 <\/td>\n<\/tr>\n
147<\/td>\nUG-84.1M Charpy V\u2010Notch Impact Test Requirements for Full-Size Specimens for Carbon and Low Alloy Steels, Having a Specified Minimum Tensile Strength of Less Than 655 MPa, Listed in Table UCS-23 <\/td>\n<\/tr>\n
148<\/td>\nUG-84.2 Charpy Impact Test Temperature Reduction Below Minimum Design Metal Temperature
UG-84.3 Specifications for Impact Tested Materials in Various Product Forms
UG-84.4 Impact Test Temperature Differential <\/td>\n<\/tr>\n
149<\/td>\nUG-84.5 HAZ Impact Specimen Removal
UG-84.6 Required HAZ Impact Test Specimen Set Removal <\/td>\n<\/tr>\n
163<\/td>\nUG-116 Official Certification Mark to Denote the American Society of Mechanical Engineers\u2019 Standard <\/td>\n<\/tr>\n
166<\/td>\nUG-118 Form of Stamping <\/td>\n<\/tr>\n
173<\/td>\nUG-129.1 Official Certification Mark to Denote the American Society of Mechanical Engineers\u2019 Standard for Pressure Relief Valves
UG-129.2 Official Certification Mark to Denote the American Society of Mechanical Engineers\u2019 Standard for Nonreclosing Pressure Relief Devices <\/td>\n<\/tr>\n
194<\/td>\nUW-3 Illustration of Welded Joint Locations Typical of Categories A, B, C, and D <\/td>\n<\/tr>\n
196<\/td>\nUW-9-1 Butt Welding of Plates of Unequal Thickness
UW-9-2 Butt Welding of Components to Thickened Neck Nozzles <\/td>\n<\/tr>\n
199<\/td>\nUW-12 Maximum Allowable Joint Efficiencies for Welded Joints <\/td>\n<\/tr>\n
200<\/td>\nUW-13.1 Heads Attached to Shells <\/td>\n<\/tr>\n
203<\/td>\nUW-13.2 Attachment of Pressure Parts to Flat Plates to Form a Corner Joint <\/td>\n<\/tr>\n
208<\/td>\nUW-13.3 Typical Pressure Parts With Butt-Welded Hubs
UW-13.4 Nozzle Necks Attached to Piping of Lesser Wall Thickness <\/td>\n<\/tr>\n
209<\/td>\nUW-13.5 Fabricated Lap Joint Stub Ends for Lethal Service <\/td>\n<\/tr>\n
210<\/td>\nUW-16.1 Some Acceptable Types of Welded Nozzles and Other Connections to Shells, Heads, etc <\/td>\n<\/tr>\n
216<\/td>\nUW-16.1 Minimum Thickness Requirements for Fittings <\/td>\n<\/tr>\n
217<\/td>\nUW-16.2 Some Acceptable Types of Small Standard Fittings <\/td>\n<\/tr>\n
218<\/td>\nUW-16.3 Some Acceptable Types of Small Bolting Pads <\/td>\n<\/tr>\n
220<\/td>\nUW-19.1 Typical Forms of Welded Staybolts
UW-19.2 Use of Plug and Slot Welds for Staying Plates <\/td>\n<\/tr>\n
222<\/td>\nUW-20.1 Some Acceptable Types of Tube\u2010to\u2010Tubesheet Strength Welds <\/td>\n<\/tr>\n
224<\/td>\nUW-21 Welds of Socket Weld Flanges to Nozzle Necks <\/td>\n<\/tr>\n
226<\/td>\nUW-33 <\/td>\n<\/tr>\n
238<\/td>\nUB-2 Maximum Design Temperatures for Brazing Filler Metal <\/td>\n<\/tr>\n
240<\/td>\nUB-14 Examples of Filler Metal Application <\/td>\n<\/tr>\n
241<\/td>\nUB-16 Some Acceptable Types of Brazed Joints
UB-17 Recommended Joint Clearances at Brazing Temperature <\/td>\n<\/tr>\n
247<\/td>\nUCS-23 Carbon and Low Alloy Steel <\/td>\n<\/tr>\n
250<\/td>\nUCS-56-1 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 1 <\/td>\n<\/tr>\n
251<\/td>\nUCS-56-2 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 3 <\/td>\n<\/tr>\n
252<\/td>\nUCS-56-3 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 4 <\/td>\n<\/tr>\n
253<\/td>\nUCS-56-4 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-Nos. 5A, 5B, and 5C <\/td>\n<\/tr>\n
254<\/td>\nUCS-56-5 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 9A <\/td>\n<\/tr>\n
255<\/td>\nUCS-56-6 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 9B <\/td>\n<\/tr>\n
256<\/td>\nUCS-56-7 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 10A
UCS-56-8 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 10B <\/td>\n<\/tr>\n
257<\/td>\nUCS-56-9 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 10C <\/td>\n<\/tr>\n
258<\/td>\nUCS-56-11 Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels \u2014 P-No. 15E <\/td>\n<\/tr>\n
259<\/td>\nUCS-56.1 Alternative Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels
UCS-57 Thickness Above Which Full Radiographic Examination of Butt-Welded Joints Is Mandatory <\/td>\n<\/tr>\n
260<\/td>\nUCS-66 Impact Test Exemption Curves <\/td>\n<\/tr>\n
263<\/td>\nUCS-66M Impact Test Exemption Curves <\/td>\n<\/tr>\n
266<\/td>\nUCS-66 Tabular Values for Figure UCS-66 and Figure UCS-66M <\/td>\n<\/tr>\n
268<\/td>\nUCS-66.1 Reduction in Minimum Design Metal Temperature Without Impact Testing <\/td>\n<\/tr>\n
269<\/td>\nUCS-66.1M Reduction in Minimum Design Metal Temperature Without Impact Testing <\/td>\n<\/tr>\n
270<\/td>\nUCS-66.2 Diagram of UCS-66 Rules for Determining Lowest Minimum Design Metal Temperature (MDMT) Without Impact Testing <\/td>\n<\/tr>\n
272<\/td>\nUCS-66.3 Some Typical Vessel Details Showing the Governing Thicknesses as Defined in UCS-66 <\/td>\n<\/tr>\n
277<\/td>\nUCS-79-1 Post-Cold-Forming Strain Limits and Heat Treatment Requirements for P-No. 15E Materials <\/td>\n<\/tr>\n
282<\/td>\nUNF-23.1 Nonferrous Metals \u2014 Aluminum and Aluminum Alloy Products
UNF-23.2 Nonferrous Metals \u2014 Copper and Copper Alloys <\/td>\n<\/tr>\n
283<\/td>\nUNF-23.3 Nonferrous Metals \u2014 Nickel, Cobalt, and High Nickel Alloys <\/td>\n<\/tr>\n
284<\/td>\nUNF-23.4 Nonferrous Metals \u2014 Titanium and Titanium Alloys
UNF-23.5 Nonferrous Metals \u2014 Zirconium <\/td>\n<\/tr>\n
287<\/td>\nUNF-79 Postfabrication Strain Limits and Required Heat Treatment <\/td>\n<\/tr>\n
292<\/td>\nUHA-23 High Alloy Steel <\/td>\n<\/tr>\n
294<\/td>\nUHA-32-1 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 6 <\/td>\n<\/tr>\n
295<\/td>\nUHA-32-2 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 7
UHA-32-3 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 8 <\/td>\n<\/tr>\n
296<\/td>\nUHA-32-4 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 10H
UHA-32-5 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 10I <\/td>\n<\/tr>\n
297<\/td>\nUHA-32-6 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 10K
UHA-32-7 Postweld Heat Treatment Requirements for High Alloy Steels \u2014 P-No. 45 <\/td>\n<\/tr>\n
299<\/td>\nUHA-44 Postfabrication Strain Limits and Required Heat Treatment <\/td>\n<\/tr>\n
300<\/td>\nUHA-51-1 Weld Metal Delta Ferrite Content <\/td>\n<\/tr>\n
306<\/td>\nUCI-23 Maximum Allowable Stress Values in Tension for Cast Iron <\/td>\n<\/tr>\n
307<\/td>\nUCI-78.1
UCI-78.2 <\/td>\n<\/tr>\n
315<\/td>\nUCD-23 Maximum Allowable Stress Values in Tension for Cast Ductile Iron, ksi (MPa) <\/td>\n<\/tr>\n
316<\/td>\nUCD-78.1
UCD-78.2 <\/td>\n<\/tr>\n
319<\/td>\nUHT-6.1 Charpy V\u2010Notch Impact Test Requirements
UHT-6.1M Charpy V\u2010Notch Impact Test Requirements <\/td>\n<\/tr>\n
321<\/td>\nUHT-18.1 Acceptable Welded Nozzle Attachment Readily Radiographed to Code Standards <\/td>\n<\/tr>\n
322<\/td>\nUHT-18.2 Acceptable Full Penetration Welded Nozzle Attachments Radiographable With Difficulty and Generally Requiring Special Techniques Including Multiple Exposures to Take Care of Thickness Variations <\/td>\n<\/tr>\n
323<\/td>\nUHT-23 Ferritic Steels With Properties Enhanced by Heat Treatment <\/td>\n<\/tr>\n
325<\/td>\nUHT-56 Postweld Heat Treatment Requirements for Materials in Table UHT-23 <\/td>\n<\/tr>\n
330<\/td>\nULW-2.1 Some Acceptable Layered Shell Types <\/td>\n<\/tr>\n
331<\/td>\nULW-2.2 Some Acceptable Layered Head Types <\/td>\n<\/tr>\n
333<\/td>\nULW-17.1 Transitions of Layered Shell Sections <\/td>\n<\/tr>\n
334<\/td>\nULW-17.2 Some Acceptable Solid Head Attachments to Layered Shell Sections <\/td>\n<\/tr>\n
336<\/td>\nULW-17.3 Some Acceptable Flat Heads and Tubesheets With Hubs Joining Layered Shell Sections <\/td>\n<\/tr>\n
337<\/td>\nULW-17.4 Some Acceptable Flanges for Layered Shells <\/td>\n<\/tr>\n
338<\/td>\nULW-17.5 Some Acceptable Layered Head Attachments to Layered Shells <\/td>\n<\/tr>\n
339<\/td>\nULW-17.6 Some Acceptable Welded Joints of Layered\u2010to\u2010Layered and Layered\u2010to\u2010Solid Sections <\/td>\n<\/tr>\n
341<\/td>\nULW-18.1 Some Acceptable Nozzle Attachments in Layered Shell Sections <\/td>\n<\/tr>\n
343<\/td>\nULW-22 Some Acceptable Supports for Layered Vessels <\/td>\n<\/tr>\n
345<\/td>\nULW-32.1 Solid\u2010to\u2010Layered and Layered\u2010to\u2010Layered Test Plates <\/td>\n<\/tr>\n
346<\/td>\nULW-32.2
ULW-32.3 <\/td>\n<\/tr>\n
347<\/td>\nULW-32.4 <\/td>\n<\/tr>\n
348<\/td>\nULW-54.1 <\/td>\n<\/tr>\n
349<\/td>\nULW-54.2 <\/td>\n<\/tr>\n
351<\/td>\nULW-77 <\/td>\n<\/tr>\n
354<\/td>\nULT-23 V001 Maximum Allowable Stress Values in Tension for 5%, 7%, 8%, and 9% Nickel Steels; Types 304 and 316 Stainless Steels; and 5083\u20100 Aluminum Alloy at Cryogenic Temperatures for Welded and Nonwelded Construction <\/td>\n<\/tr>\n
358<\/td>\nULT-82 Minimum Tensile Strength Requirements for Welding Procedure Qualification Tests on Tension Specimens Conforming to Section IX, Figures QW-462.1(a) Through QW-462.1(e) <\/td>\n<\/tr>\n
359<\/td>\nULT-82M Minimum Tensile Strength Requirements for Welding Procedure Qualification Tests on Tension Specimens Conforming to Section IX, Figures QW-462.1(a) Through QW-462.1(e) <\/td>\n<\/tr>\n
362<\/td>\nUHX-3 Terminology of Heat Exchanger Components <\/td>\n<\/tr>\n
363<\/td>\nUHX-4-1 Nozzles Adjacent to Tubesheets <\/td>\n<\/tr>\n
364<\/td>\nUHX-8.1 Tubesheet Effective Bolt Load, W* <\/td>\n<\/tr>\n
366<\/td>\nUHX-9 Some Representative Configurations Describing the Minimum Required Thickness of the Tubesheet Flanged Extension, hr <\/td>\n<\/tr>\n
367<\/td>\nUHX-10 Integral Channels <\/td>\n<\/tr>\n
369<\/td>\nUHX-11.3-1 Tubesheet Geometry <\/td>\n<\/tr>\n
370<\/td>\nUHX-11.3-2 Typical Untubed Lane Configurations <\/td>\n<\/tr>\n
371<\/td>\nUHX-11.3-3 Location of Tubesheet Metal Temperature, T’, at Rim <\/td>\n<\/tr>\n
372<\/td>\nUHX-11.5.2-1 Curves for the Determination of E*\/E and \u03bd* (Equilateral Triangular Pattern) <\/td>\n<\/tr>\n
373<\/td>\nUHX-11.5.2-2 Curves for the Determination of E*\/E and \u03bd* (Square Pattern) <\/td>\n<\/tr>\n
374<\/td>\nUHX-12.1 U\u2010Tube Tubesheet Configurations <\/td>\n<\/tr>\n
375<\/td>\nUHX-12.2 Tube Layout Perimeter <\/td>\n<\/tr>\n
376<\/td>\nUHX-12.4-1 <\/td>\n<\/tr>\n
382<\/td>\nUHX-13.1 Fixed Tubesheet Configurations <\/td>\n<\/tr>\n
383<\/td>\nUHX-13.1 Formulas for Determination of Zd, Zv, Zm, Zw, and Fm <\/td>\n<\/tr>\n
384<\/td>\nUHX-13.2 Formulas for Determination of Ft,min and Ft,max <\/td>\n<\/tr>\n
385<\/td>\nUHX-13.2 Zd, Zv, Zw, and Zm Versus Xa
UHX-13.4-1 <\/td>\n<\/tr>\n
386<\/td>\nUHX-13.4 Different Shell Thicknesses and\/or Material Adjacent to the Tubesheets
UHX-13.4-2 <\/td>\n<\/tr>\n
388<\/td>\nUHX-13.5.7-1 Fm Versus Xa (0.0 \u2264 Q3 \u2264 0.8) <\/td>\n<\/tr>\n
389<\/td>\nUHX-13.5.7-2 Fm Versus Xa (\u22120.8 \u2264 Q3 \u2264 0.0) <\/td>\n<\/tr>\n
393<\/td>\nUHX-13.8.4-1 <\/td>\n<\/tr>\n
396<\/td>\nUHX-13.10.3-1 Kettle Shell <\/td>\n<\/tr>\n
398<\/td>\nUHX-14.1 Floating Tubesheet Heat Exchangers <\/td>\n<\/tr>\n
399<\/td>\nUHX-14.2 Stationary Tubesheet Configurations <\/td>\n<\/tr>\n
401<\/td>\nUHX-14.3 Floating Tubesheet Configurations <\/td>\n<\/tr>\n
402<\/td>\nUHX-14.4-1 <\/td>\n<\/tr>\n
407<\/td>\nUHX-14.6.4-1 <\/td>\n<\/tr>\n
409<\/td>\nUHX-17 Flexible Shell Element Expansion Joint Load Cases and Stress Limits <\/td>\n<\/tr>\n
414<\/td>\nUIG-6-1 Properties of Certified Material <\/td>\n<\/tr>\n
416<\/td>\nUIG-34-1 Typical Graphite Shell and Tube Heat Exchanger
UIG-34-2 Fixed Tubesheet Configurations <\/td>\n<\/tr>\n
417<\/td>\nUIG-34-3 Floating Tubesheet Configurations <\/td>\n<\/tr>\n
420<\/td>\nUIG-34-1 <\/td>\n<\/tr>\n
423<\/td>\nUIG-34-2 Values for Determining E*\/E and v* Equilateral Triangular Pattern
UIG-34-3 Values for Determining E*\/E and v* Equilateral Square Pattern <\/td>\n<\/tr>\n
424<\/td>\nUIG-34-4 Tubesheet Geometry <\/td>\n<\/tr>\n
425<\/td>\nUIG-34-4 Formulas for Determination of Zd, Zv, Zm, Zw, and Fm <\/td>\n<\/tr>\n
426<\/td>\nUIG-34-5 Formulas for Determination of Ft,min and Ft,max <\/td>\n<\/tr>\n
427<\/td>\nUIG-36-1 Unacceptable Nozzle Attachment Details <\/td>\n<\/tr>\n
428<\/td>\nUIG-36-2 Some Acceptable Nozzle Attachment Details in Impregnated Graphite Pressure Vessels <\/td>\n<\/tr>\n
433<\/td>\nUIG-76-1 Tension Test Specimen <\/td>\n<\/tr>\n
434<\/td>\nUIG-76-2 Cement Material Tension Test Specimen <\/td>\n<\/tr>\n
435<\/td>\nUIG-76-3 Tube-to-Tubesheet Tension Test Specimen <\/td>\n<\/tr>\n
436<\/td>\nUIG-76-4 Tube Cement Joint Tension Test Specimen <\/td>\n<\/tr>\n
437<\/td>\nUIG-76-5 Tube Tension Test Specimen <\/td>\n<\/tr>\n
439<\/td>\nUIG-84-1 Test Frequency for Certified Materials <\/td>\n<\/tr>\n
442<\/td>\nCMQ Certified Material Qualification Form <\/td>\n<\/tr>\n
449<\/td>\nCCQ Certified Cement Qualification Form <\/td>\n<\/tr>\n
451<\/td>\nCPQ Cementing Procedure Qualification Form <\/td>\n<\/tr>\n
453<\/td>\nCTQ Cementing Technician Qualification Form <\/td>\n<\/tr>\n
456<\/td>\n1-4 Principal Dimensions of Typical Heads
1-4.1 Values of Factor K <\/td>\n<\/tr>\n
457<\/td>\n1-4.2 Values of Factor M
1-4.3 Maximum Metal Temperature <\/td>\n<\/tr>\n
458<\/td>\n1-4.4 Values of Knuckle Radius, r
1-5.1 Values of \u0394 for Junctions at the Large Cylinder for \u03b1 \u2264 30 deg <\/td>\n<\/tr>\n
459<\/td>\n1-5.2 Values of \u0394 for Junctions at the Small Cylinder for \u03b1 \u2264 30 deg <\/td>\n<\/tr>\n
461<\/td>\n1-6 Dished Covers With Bolting Flanges <\/td>\n<\/tr>\n
464<\/td>\n1-7-1
1-7-2 <\/td>\n<\/tr>\n
466<\/td>\n1-8.1 Values of \u0394 for Junctions at the Large Cylinder for \u03b1 \u2264 60 deg <\/td>\n<\/tr>\n
473<\/td>\n2-4 Types of Flanges <\/td>\n<\/tr>\n
476<\/td>\n2-4 Recommended Minimum Gasket Contact Widths for Sheet and Composite Gaskets <\/td>\n<\/tr>\n
477<\/td>\n2-5.1 Gasket Materials and Contact Facings <\/td>\n<\/tr>\n
479<\/td>\n2-5.2 Effective Gasket Width <\/td>\n<\/tr>\n
480<\/td>\n2-6 Moment Arms for Flange Loads Under Operating Conditions <\/td>\n<\/tr>\n
482<\/td>\n2-7.1 Values of T, U, Y, and Z (Terms Involving K) <\/td>\n<\/tr>\n
483<\/td>\n2-7.2 Values of F (Integral Flange Factors) <\/td>\n<\/tr>\n
484<\/td>\n2-7.3 Values of V (Integral Flange Factors) <\/td>\n<\/tr>\n
485<\/td>\n2-7.4 Values of FL (Loose Hub Flange Factors)
2-7.5 Values of VL (Loose Hub Flange Factors) <\/td>\n<\/tr>\n
486<\/td>\n2-7.6 Values of f (Hub Stress Correction Factor) <\/td>\n<\/tr>\n
487<\/td>\n2-7.1 Flange Factors in Formula Form <\/td>\n<\/tr>\n
489<\/td>\n2-13.1 Reverse Flange <\/td>\n<\/tr>\n
490<\/td>\n2-13.2 Loose Ring Type Reverse Flange <\/td>\n<\/tr>\n
491<\/td>\n2-14 Flange Rigidity Factors <\/td>\n<\/tr>\n
495<\/td>\n4-1 <\/td>\n<\/tr>\n
496<\/td>\n4-1 Aligned Rounded Indications <\/td>\n<\/tr>\n
497<\/td>\n4-2 Groups of Aligned Rounded Indications <\/td>\n<\/tr>\n
498<\/td>\n4-3 Charts for t Equal to 1\/8 in. to 1\/4 in. (3 mm to 6 mm), Inclusive <\/td>\n<\/tr>\n
499<\/td>\n4-4 Charts for t Over 1\/4 in. to 3\/8 in. (6 mm to 10 mm), Inclusive
4-5 Charts for t Over 3\/8 in. to 3\/4 in. (10 mm to 19 mm), Inclusive <\/td>\n<\/tr>\n
500<\/td>\n4-6 Charts for t Over 3\/4 in. to 2 in. (19 mm to 50 mm), Inclusive <\/td>\n<\/tr>\n
501<\/td>\n4-7 Charts for t Over 2 in. to 4 in. (50 mm to 100 mm), Inclusive <\/td>\n<\/tr>\n
502<\/td>\n4-8 Charts for t Over 4 in. (100 mm) <\/td>\n<\/tr>\n
504<\/td>\n5-1 Typical Flexible Shell Element Expansion Joints <\/td>\n<\/tr>\n
505<\/td>\n5-2 Typical Nozzle Attachment Details Showing Minimum Length of Straight Flange or Outer Shell Element <\/td>\n<\/tr>\n
515<\/td>\n9-2 Some Acceptable Types of Jacketed Vessels <\/td>\n<\/tr>\n
517<\/td>\n9-5 Some Acceptable Types of Jacket Closures <\/td>\n<\/tr>\n
521<\/td>\n9-6 Some Acceptable Types of Penetration Details <\/td>\n<\/tr>\n
522<\/td>\n9-7 <\/td>\n<\/tr>\n
527<\/td>\n11-1 Constant, C, for Gas or Vapor Related to Ratio of Specific Heats (k = cp\/cv)
11-1M Constant, C, for Gas or Vapor Related to Ratio of Specific Heats (k = cp\/cv) <\/td>\n<\/tr>\n
528<\/td>\n11-1 Molecular Weights of Gases and Vapors <\/td>\n<\/tr>\n
529<\/td>\n11-2 Flow Capacity Curve for Rating Nozzle-Type Safety Valves on Saturated Water (Based on 10% Overpressure)
11-2M Flow Capacity Curve for Rating Nozzle-Type Safety Valves on Saturated Water (Based on 10% Overpressure) <\/td>\n<\/tr>\n
532<\/td>\n13-2(a) Vessels of Rectangular Cross Section <\/td>\n<\/tr>\n
536<\/td>\n13-2(b) Vessels of Obround Cross Section <\/td>\n<\/tr>\n
537<\/td>\n13-2(c) Vessel of Circular Cross Section With Central Dividing Plate <\/td>\n<\/tr>\n
541<\/td>\n13-6 Plate With Multidiameter Hole Pattern <\/td>\n<\/tr>\n
543<\/td>\n13-8(d) <\/td>\n<\/tr>\n
548<\/td>\n13-8(e) <\/td>\n<\/tr>\n
554<\/td>\n13-13(c) <\/td>\n<\/tr>\n
555<\/td>\n13-14(a)
13-14(b) Orientation of Panel Dimensions and Stresses <\/td>\n<\/tr>\n
558<\/td>\n13-18.1 <\/td>\n<\/tr>\n
559<\/td>\n13-18(b) <\/td>\n<\/tr>\n
561<\/td>\n14-1 Integral Flat Head With Large Central Opening <\/td>\n<\/tr>\n
567<\/td>\n17-1 Two Embossed Plates
17-2 Two Dimpled Plates
17-3 Embossed Plate to Plain Plate <\/td>\n<\/tr>\n
568<\/td>\n17-4 Arc\u2010Spot\u2010Welded Two\u2010Layer Assembly
17-5 Dimpled Plate Welded to Plain Plate
17-6 Three\u2010Ply Assemblies
17-7 Single\u2010Spot\u2010Weld Tension Specimen, Two\u2010Ply Joint <\/td>\n<\/tr>\n
569<\/td>\n17-8 Seam\u2010Weld Specimen for Tension and Macrosection, Two\u2010Ply Joint
17-9 Single Spot\u2010Weld Tension Specimen for Three\u2010Ply Joint
17-10 Seam\u2010Weld Specimen for Tension and Macrosection for Three\u2010Ply Joint <\/td>\n<\/tr>\n
570<\/td>\n17-11 Gas Metal Arc\u2010Spot\u2010Weld Block for Macrosections and Strength Tests <\/td>\n<\/tr>\n
571<\/td>\n17-12 Gas Metal Arc\u2010Spot\u2010Weld Block for Bend Tests <\/td>\n<\/tr>\n
572<\/td>\n17-13 Gas Tungsten\u2010Arc Seam Weld, Plasma\u2010Arc Seam Weld, Submerged\u2010Arc Seam Weld, and Laser Beam Seam Weld Test Specimen for Bend Tests <\/td>\n<\/tr>\n
573<\/td>\n17-14
17-15
17-16 Peel Test <\/td>\n<\/tr>\n
574<\/td>\n17-17 Complete Penetration Welding Per 17-1(c) <\/td>\n<\/tr>\n
579<\/td>\n22-1 Typical Sections of Special Seamless Vessels <\/td>\n<\/tr>\n
584<\/td>\n24-1 Typical Hub and Clamp <\/td>\n<\/tr>\n
585<\/td>\n24-2 Typical Clamp Lug Configurations <\/td>\n<\/tr>\n
588<\/td>\n24-8 Allowable Design Stress for Clamp Connections <\/td>\n<\/tr>\n
590<\/td>\n26-1-1 Typical Bellows Expansion Joints <\/td>\n<\/tr>\n
591<\/td>\n26-1-2 Starting Points for the Measurement of the Length of Shell on Each Side of the Bellows
26-2-1 Maximum Design Temperatures for Application of the Rules of Mandatory Appendix 26 <\/td>\n<\/tr>\n
593<\/td>\n26-2 Dimensions to Determine Ixx <\/td>\n<\/tr>\n
596<\/td>\n26-3 Possible Convolution Profile in the Neutral Position <\/td>\n<\/tr>\n
597<\/td>\n26-4 Coefficient Cp <\/td>\n<\/tr>\n
598<\/td>\n26-5 Coefficient Cf <\/td>\n<\/tr>\n
602<\/td>\n26-6 Coefficient Cd <\/td>\n<\/tr>\n
605<\/td>\n26-7 Bellows Subjected to an Axial Displacement x <\/td>\n<\/tr>\n
607<\/td>\n26-8 Tabular Values for Coefficients B1, B2, B3 <\/td>\n<\/tr>\n
608<\/td>\n26-8 Bellows Subjected to a Lateral Deflection y
26-9 Bellows Subjected to an Angular Rotation \u03b8 <\/td>\n<\/tr>\n
610<\/td>\n26-10 Cyclic Displacements
26-10-1 U-Shaped Unreinforced and Reinforced Bellows Manufacturing Tolerances <\/td>\n<\/tr>\n
611<\/td>\n26-11 Cyclic Displacements
26-12 Cyclic Displacements <\/td>\n<\/tr>\n
612<\/td>\n26-13 Some Typical Expansion Bellows to Weld End Details <\/td>\n<\/tr>\n
613<\/td>\n26-14 Toroidal Bellows Manufacturing Tolerances
26-15.1a Polynomial Coefficients \u03b1i for the Determination of Cp When C1 \u2264 0.3
26-15.1b Polynomial Coefficients \u03b1i for the Determination of Cp When C1 > 0.3 <\/td>\n<\/tr>\n
614<\/td>\n26-15.2 Polynomial Coefficients \u03b2i for the Determination of Cf
26-15.3 Polynomial Coefficients \u03b3i for the Determination of Cd <\/td>\n<\/tr>\n
615<\/td>\n26-1 Specification Sheet for ASME Section VIII, Division 1 Mandatory Appendix 26 Bellows Expansion Joints <\/td>\n<\/tr>\n
617<\/td>\n26-1M Specification Sheet for ASME Section VIII, Division 1 Mandatory Appendix 26 Bellows Expansion Joints <\/td>\n<\/tr>\n
621<\/td>\n30-1 Thickness Ratio Versus Diameter Ratio <\/td>\n<\/tr>\n
623<\/td>\n31-1 Material Specifications <\/td>\n<\/tr>\n
624<\/td>\n31-1
31-2 Composition Requirements for 21\/4Cr\u20131Mo\u20131\/4V Weld Metal <\/td>\n<\/tr>\n
626<\/td>\n32-3 Nomenclature <\/td>\n<\/tr>\n
627<\/td>\n32-4-1 Limits for Torispherical Head <\/td>\n<\/tr>\n
628<\/td>\n32-4-2 Limits for Ellipsoidal Head
32-4-3 Limits for Hemispherical Head <\/td>\n<\/tr>\n
629<\/td>\n32-5-1 LTA Blend Grinding <\/td>\n<\/tr>\n
631<\/td>\n34-1 Material Specifications <\/td>\n<\/tr>\n
632<\/td>\n34-2 Additional Requirements <\/td>\n<\/tr>\n
637<\/td>\n36-4-1 Test Specimen Arrangement <\/td>\n<\/tr>\n
643<\/td>\n39-4-1 Schematic Diagram of Vacuum Apparatus <\/td>\n<\/tr>\n
644<\/td>\n40-3-1 Typical Equipment (Dilometer) for Thermal Expansion Test <\/td>\n<\/tr>\n
645<\/td>\n40-6-1 Typical Recording Curve in Thermal Expansion Test, \u0394Lt = f(\u03b8) <\/td>\n<\/tr>\n
647<\/td>\n41-1-1 EIH Support Plate Gasketed With Mating Flange <\/td>\n<\/tr>\n
648<\/td>\n41-4-1 Typical EIH Support Plate and Element Geometry <\/td>\n<\/tr>\n
649<\/td>\n41-5-1 Some Representative Configurations Describing the Minimum Required Thickness of the EIH Support Plate Flanged Extension, hr <\/td>\n<\/tr>\n
653<\/td>\n42-5.1-1 <\/td>\n<\/tr>\n
655<\/td>\n44-4-1 Allowable Materials and Design Stress <\/td>\n<\/tr>\n
659<\/td>\n45-3.1-1 Typical Plate Heat Exchanger <\/td>\n<\/tr>\n
666<\/td>\nA-2 Efficiencies fr <\/td>\n<\/tr>\n
667<\/td>\nA-2 Some Acceptable Types of Tube\u2010to\u2010Tubesheet Welds <\/td>\n<\/tr>\n
668<\/td>\nA-3 Typical Test Fixtures for Expanded or Welded Tube\u2010to\u2010Tubesheet Joints <\/td>\n<\/tr>\n
679<\/td>\nK-2 Some Acceptable Types of Filler Plugs <\/td>\n<\/tr>\n
681<\/td>\nL-1.4-1 Joint Efficiency and Weld Joint Type \u2014 Cylinders and Cones <\/td>\n<\/tr>\n
682<\/td>\nL-1.4-2 Joint Efficiency and Weld Joint Type \u2014 Heads <\/td>\n<\/tr>\n
683<\/td>\nL-1.4-3 Joint Efficiencies for Category A and D Welded Joints in Shells, Heads, or Cones <\/td>\n<\/tr>\n
684<\/td>\nL-1.4-4 Joint Efficiencies for Category B and C Welded Joints in Shells or Cones <\/td>\n<\/tr>\n
691<\/td>\nP-1 Criteria for Establishing Allowable Stress Values <\/td>\n<\/tr>\n
698<\/td>\nU-1 Manufacturer\u2019s Data Report for Pressure Vessels <\/td>\n<\/tr>\n
701<\/td>\nU-1A Manufacturer\u2019s Data Report for Pressure Vessels <\/td>\n<\/tr>\n
703<\/td>\nU-1B Manufacturer\u2019s Supplementary Data Report for Graphite Pressure Vessels <\/td>\n<\/tr>\n
704<\/td>\nU-1P Manufacturer\u2019s Data Report for Plate Heat Exchangers <\/td>\n<\/tr>\n
706<\/td>\nU-2 Manufacturer\u2019s Partial Data Report <\/td>\n<\/tr>\n
709<\/td>\nU-2A Manufacturer\u2019s Partial Data Report (Alternative Form) <\/td>\n<\/tr>\n
711<\/td>\nU-3 Manufacturer\u2019s Certificate of Compliance Covering Pressure Vessels to Be Stamped With the UM Designator [See U-1(j)] <\/td>\n<\/tr>\n
713<\/td>\nU-3A Manufacturer\u2019s Certificate of Compliance (Alternative Form) Covering Pressure Vessels to Be Stamped With the UM Designator [See U-1(j)] <\/td>\n<\/tr>\n
715<\/td>\nU-3P Manufacturer\u2019s Certificate of Compliance for Plate Heat Exchangers Covering Pressure Vessels to Be Stamped With the UM Designator [See U-1(j)] <\/td>\n<\/tr>\n
717<\/td>\nU-4 Manufacturer\u2019s Data Report Supplementary Sheet <\/td>\n<\/tr>\n
718<\/td>\nU-5 Manufacturer\u2019s Data Report Supplementary Sheet Shell-and-Tube Heat Exchangers <\/td>\n<\/tr>\n
719<\/td>\nW-3 Instructions for the Preparation of Manufacturer\u2019s Data Reports <\/td>\n<\/tr>\n
724<\/td>\nW-3.1 Example of the Use of Form U-4 <\/td>\n<\/tr>\n
725<\/td>\nW-3.1 Supplementary Instructions for the Preparation of Manufacturer\u2019s Data Reports for Layered Vessels <\/td>\n<\/tr>\n
726<\/td>\nUV-1 Manufacturer\u2019s or Assembler\u2019s Certificate of Conformance for Pressure Relief Valves <\/td>\n<\/tr>\n
727<\/td>\nUD-1 Manufacturer\u2019s Certificate of Conformance for Nonreclosing Pressure Relief Devices <\/td>\n<\/tr>\n
728<\/td>\nW-3.2 Supplementary Instructions for the Preparation of Manufacturer\u2019s or Assembler\u2019s Certificate of Conformance Forms UV-1 and UD-1 <\/td>\n<\/tr>\n
732<\/td>\nY-3.1 <\/td>\n<\/tr>\n
733<\/td>\nY-3.2 Flange Dimensions and Forces <\/td>\n<\/tr>\n
735<\/td>\nY-5.1.1 Class 1 Flange Assembly (Identical Flange Pairs)
Y-5.1.2 Class 2 Flange Assembly <\/td>\n<\/tr>\n
736<\/td>\nY-5.1.3 Class 3 Flange Assembly
Y-6.1 Summary of Applicable Equations for Different Classes of Assemblies and Different Categories of Flanges <\/td>\n<\/tr>\n
741<\/td>\nY-9.1 Trial Flange Thickness and Area of Bolting for Various Classes of Assemblies and Flange Categories <\/td>\n<\/tr>\n
745<\/td>\nEE-1 NPS 2 Pipe Jacket <\/td>\n<\/tr>\n
746<\/td>\nEE-2 NPS 3 Pipe Jacket <\/td>\n<\/tr>\n
747<\/td>\nEE-3 NPS 4 Pipe Jacket <\/td>\n<\/tr>\n
748<\/td>\nEE-4
EE-5 <\/td>\n<\/tr>\n
758<\/td>\nQEXP-1 Tube Expanding Procedure Specification (TEPS) <\/td>\n<\/tr>\n
760<\/td>\nQEXP-1 Instructions for Filling Out TEPS Form <\/td>\n<\/tr>\n
762<\/td>\nQEXP-2 Suggested Format for Tube-to-Tubesheet Expanding Procedure Qualification Record for Test Qualification (TEPQR) <\/td>\n<\/tr>\n
765<\/td>\nJJ-1.2-1 Austenitic Stainless Steel Base Metal and HAZ Toughness Testing Requirements <\/td>\n<\/tr>\n
766<\/td>\nJJ-1.2-2 Welding Procedure Qualification With Toughness Testing Requirements for Austenitic Stainless Steel <\/td>\n<\/tr>\n
767<\/td>\nJJ-1.2-3 Welding Consumable Pre\u2010Use Testing Requirements for Austenitic Stainless Steel <\/td>\n<\/tr>\n
768<\/td>\nJJ-1.2-4 Production Toughness Testing Requirements for Austenitic Stainless Steel <\/td>\n<\/tr>\n
769<\/td>\nJJ-1.2-5 Austenitic-Ferritic Duplex, Ferritic Chromium, and Martensitic Stainless Steel Toughness Testing Requirements <\/td>\n<\/tr>\n
771<\/td>\nU-DR-1 User\u2019s Design Requirements for Single-Chamber Pressure Vessels <\/td>\n<\/tr>\n
773<\/td>\nU-DR-2 User\u2019s Design Requirements for Multichamber Pressure Vessels <\/td>\n<\/tr>\n
775<\/td>\nKK-1 Instructions for the Preparation of User\u2019s Design Requirements <\/td>\n<\/tr>\n
777<\/td>\nLL-1 Graphical Representation of Ft,min <\/td>\n<\/tr>\n
778<\/td>\nLL-2 Graphical Representation of Ft,max <\/td>\n<\/tr>\n
783<\/td>\nNN-6-1 Responsibilities of the User <\/td>\n<\/tr>\n
784<\/td>\nNN-6-2 Matters of Agreement Between the User and the Manufacturer
NN-6-3 The Manufacturer\u2019s Responsibility to the User
NN-6-4 Recommendations to the User <\/td>\n<\/tr>\n
785<\/td>\nNN-6-5 Responsibilities of the User or His Designated Agent
NN-6-6 Matters of Agreement Between the User or His Designated Agent and the Manufacturer <\/td>\n<\/tr>\n
786<\/td>\nNN-6-7 The Manufacturer\u2019s Responsibility to the User or His Designated Agent
NN-6-8 Recommendations to the User or His Designated Agent
NN-6-9 Cautionary Advice Provided to the User <\/td>\n<\/tr>\n
787<\/td>\nNN-6-10 Guidance Code to Users and Their Designated Agents
NN-6-11 User\u2013Manufacturer Rules <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

ASME BPVC – VIII – 1 -2019 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
ASME<\/b><\/a><\/td>\n2019<\/td>\n796<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":191358,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[2643],"product_tag":[],"class_list":{"0":"post-191356","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-asme","8":"first","9":"instock","10":"sold-individually","11":"shipping-taxable","12":"purchasable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/191356","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/191358"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=191356"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=191356"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=191356"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}