AS 1397:2011
$43.55
Continuous hot-dip metallic coated steel sheet and strip – Coatings of zinc and zinc alloyed with aluminium and magnesium
| Published By | Publication Date | Number of Pages |
| AS | 2011-09-15 | 37 |
Specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
Scope
This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
Requirements for product conformity to this Standard are given in Appendix B.
Requirements covered in this Standard are as follows:
Formability grades of steel.
Structural grades of steel.
Classes of zinc coating, including differential coatings.
Classes of zinc coating converted to zinc/iron alloy.
Classes of zinc/aluminium coatings.
Classes of zinc/aluminium/magnesium alloy coating.
Classes of aluminium/zinc alloy coating.
Classes of aluminium/zinc/magnesium alloy coating.
Surface finish.
Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.
The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated.
Within the description of the classes of coatings, the majority element present is listed first, followed by the next major element and followed by a third element if appropriate.
Related products
-
BS ISO 13975:2012
Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems.…
-
ISO/TS 13907:2012
Soil quality — Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates — Method by gas…
-
ISO 13976:2016
Hot-rolled steel sheet in coils of structural quality and heavy thickness Published By Publication Date…
-
BS EN 13976-2:2011
Rescue systems. Transportation of incubators – System requirements Published By Publication Date Number of Pages…
-
SAE J 1297:2017
Alternative Automotive Fuels Published By Publication Date Number of Pages SAE 2017-10-04 32
-
AS 1327:2001
Plastics – Standard atmospheres for conditioning and testing Published By Publication Date Number of Pages…
-
AS 1397:2021
Continuous hot-dip metallic coated steel sheet and strip – Coatings of zinc and zinc alloyed…
-
AS 1397:2001
Steel sheet and strip – Hot-dipped zinc-coated or aluminium/zinc-coated Published By Publication Date Number of…
-
SAE AIR 1397B:2019
Clamp Material, Injection Molded Published By Publication Date Number of Pages SAE 2019-09-26 3
-
BS EN 13697:2015
Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal…
-
BS EN 13967:2012+A1:2017
Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement…
-
SAE J 1377:2011
Transmission Mounted Vehicle Speed Signal Rotor Specification Published By Publication Date Number of Pages SAE…
-
ISO 13975:2012
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion…
-
TIA-1097-A:2011
Security Mechanisms Using GBA Published By Publication Date Number of Pages TIA 2011 34
-
BS EN 1367-5:2011
Tests for thermal and weathering properties of aggregates – Determination of resistance to thermal shock…
-
AS/NZS 1367:2016
Coaxial cable and optical fibre systems for the RF distribution of digital television, radio and…
-
UL 1197:2021
Standard for Immersion Suits Published By Publication Date Number of Pages UL 2021-09-23 33
-
BS 1377-3:2018
Methods of test for soils for civil engineering purposes – Chemical and electro-chemical testing Published…
-
BS EN 1097-1:2011
Tests for mechanical and physical properties of aggregates – Determination of the resistance to wear…
-
ISO 13970:2011
Recreational diving services — Requirements for the training of recreational snorkelling guides Published By Publication…
-
ISO/TR 13973:2014
Artificial recharge to groundwater Published By Publication Date Number of Pages ISO 2014-11 40
-
SAE J 1797:2016
Recommended Practice for Packaging of Electric Vehicle Battery Modules Published By Publication Date Number of…
-
BS EN 1197:2014
Chemicals used for treatment of water intended for human consumption. Monozinc phosphate solution Published By…
-
BS ISO 15397:2014
Graphic technology. Communication of graphic paper properties Published By Publication Date Number of Pages BSI…
-
BS EN 1397:2015:2016 Edition
Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance Published By…
-
BS EN 1396:2015
Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications Published By…
-
BS ISO 13797:2012
Ships and marine technology. Ship?s mooring and towing fittings. Cruciform bollards Published By Publication Date…
-
ISO 1797-1:2011
Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals Published By…
-
ISO 13797:2012
Ships and marine technology — Ship’s mooring and towing fittings — Cruciform bollards Published By…
-
BS EN 13976-1:2011
Rescue systems. Transportation of incubators – Interface conditions Published By Publication Date Number of Pages…
-
IEEE 1307-2018
IEEE Standard for Fall Protection for Electric Utility Transmission and Distribution on Poles and Structures…
-
SAE J 1597:2021
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability Published By Publication Date…
-
SAE AS 1393:2010
Serial Hi-Rel Ring Network for Aerospace Applications (RingNet) Published By Publication Date Number of Pages…
-
TIA TSB-1197:2014
Mode Conversion Parameters for Balanced Twisted Pair Cabling Published By Publication Date Number of Pages…
-
SAE AS 85049/139C:2018
Bushing, Cable Clamp to Cable, Telescoping for AS85049 Cable Clamps Category 9 Published By Publication…
-
UNE-EN 13497:2018:2019 Edition
Thermal insulation products for building applications – Determination of the resistance to impact of external…
-
BS 1377-1:2016
Methods of test for soils for civil engineering purposes – General requirements and sample preparation…
-
SAE J 1697:2013
Recommended Practices for Design and Evaluation of Passenger and Light Truck Coolant Hose Clamped Joints…
-
ISO 13947:2011
Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using…
-
BS ISO 13947:2011
Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a…
