AS 3706.11:2012
$20.15
Geotextiles – Methods of test-Determination of durability – Resistance to degradation by light, heat and moisture
| Published By | Publication Date | Number of Pages |
| AS | 2012-04-30 | 9 |
This Standard sets out a method for determining the durability of geotextiles when subjected to degradation by artificial light and heat.
NOTES:
1 As the artificial light source produces heat, it is expedient to combine the tests for these two
agencies of degradation.
2 If the product is subjected to prolonged high temperatures, a separate oven-ageing method
may be more suitable for testing resistance to degradation due to heat.
Related products
-
ASME B5.64 2022
ASME B5.64-2022 Methods for the Performance Evaluation of Single-Axis Linear Positioning Systems Published By Publication…
-
AS 3706.2:2012
Geotextiles – Methods of test-Determination of tensile properties – Wide strip and grab method Published…
-
UNE-EN ISO 16484-5:2014
Building automation and control systems (BACS) – Part 5: Data communication protocol Published By Publication…
-
BSI PD CEN/TR 17608:2022
State of the art on the use of flammable refrigerant alternatives, in particular from class…
-
BS ISO 24334:2019
Laminate floor coverings. Determination of locking strength for mechanically assembled panels Published By Publication Date…
-
AS 3706.6:2012
Geotextiles – Methods of test-Determination of seam strength Published By Publication Date Number of Pages…
-
AS 3706.5:2014
Geotextiles – Methods of test – Determination of puncture resistance – Drop cone method Published…
-
AS 3706.1:2012
Geotextiles – Methods of test-General requirements, sampling, conditioning, basic physical properties and statistical analysis Published…
-
CAN ULC-S706.1-2016
Standard for Wood Fiber Insulating Boards for Buildings Published By Publication Date Number of Pages…
-
ASME B29.21 2013 R2023
ASME B29.21-2013 700 Class Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants Published…
-
BS ISO 6370-2:2011
Vitreous and porcelain enamels. Determination of the resistance to abrasion – Loss in mass after…
-
ASTM-E408 2002
E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques Published By…
-
BS ISO 21111-3:2020
Road vehicles. In-vehicle Ethernet – Optical 1-Gbit/s physical entity requirements and conformance test plan Published…
-
AS 3706.3:2012
Geotextiles – Methods of test-Determination of tearing strength – Trapezoidal method Published By Publication Date…
-
ASHRAE Standard 170 2021
ASHRAE Standard 170-2021 — Ventilation of Health Care Facilities (ANSI Approved; ASHE Co-sponsored) Published By…
-
AS/NZS ISO 7176.11:2013
Wheelchairs – Test dummies Published By Publication Date Number of Pages AS 2013-08-30 41
-
TIA-707.11-B:2012
Data Service Option for Spread Spectrum Systems – Section 11 Published By Publication Date Number…
-
ACI 306.1 90:1990 Edition
306.1-90: Standard Specification for Cold Weather Concreting (Reapproved 2002) Published By Publication Date Number of…
-
ASME B31.3 2022 w ERRATA
ASME B31.3-2022 Process Piping Published By Publication Date Number of Pages ASME 2022
-
ICC Standard 901 2015
ICC 901/SRCC 100-2015: Solar Thermal Collector Standard Published By Publication Date Number of Pages ICC…
-
AZ Phoenix 4 N/A
City of Phoenix, Amendments to 2012 International Building Code Published By Publication Date Number of…
-
IEEE 3001.11 2017
IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems…
-
BS EN ISO 3211:2018:2019 Edition
Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking…
-
BS EN ISO 20932-1:2020
Textiles. Determination of the elasticity of fabrics – Strip tests Published By Publication Date Number…
-
AS 3706.7:2014
Geotextiles – Methods of test – Determination of pore-size distribution – Dry-sieving method Published By…
-
ASME B16.29 2022
ASME B16.29-2022 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV Published By Publication Date…
-
ASME B89.3.7 2013 R2023
ASME B89.3.7-2013 Granite Surface Plates Published By Publication Date Number of Pages ASME 2013
-
AS 3706.4:2012
Geotextiles – Methods of test-Determination of burst strength – California bearing ratio (CBR) – Plunger…
-
ASME B36.19 2022 w ERRATA
ASME B36.19-2022 Welded and Seamless Wrought Stainless Steel Pipe Published By Publication Date Number of…
-
NC FireCode 2018 1stPrint
North Carolina State Building Code: Fire Prevention Code 2018 Published By Publication Date Number of…
-
ASME B30.24 2018 R2023
ASME B30.24-2018 Container Cranes Published By Publication Date Number of Pages ASME 2023 37
-
ASTM-C443M 2021(Redline)
C443M-21 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric) (Redline)…
-
AISC A358 2022
ANSI/AISC 358-22 – Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications…
-
BS EN IEC 62271-103:2023
High-voltage switchgear and controlgear – Alternating current switches for rated voltages above 1 kV up…
-
AS 3706.10.1:2012
Geotextiles – Methods of test-Determination of transmissivity – Radial method Published By Publication Date Number…
-
SAE AS 85049/91D:2016
Connector Accessories, Composite, Electrical, Strain Relief, Straight, Self-Locking, Category 4C (for MIL-DTL-38999 Series III and…
-
AS 3706.13:2012
Geotextiles – Methods of test-Determination of durability – Resistance to certain microbiological agents Published By…
-
AS 3706.9:2012
Geotextiles – Methods of test-Determination of permittivity, permeability and flow rate Published By Publication Date…
-
BS EN ISO 11111-1:2009:2010 Edition
Textile machinery. Safety requirements – Common requirements Published By Publication Date Number of Pages BSI…
-
ASME PTC 19.6 2018 R2023
ASME PTC 19.6-2018 Electrical Power Measurements Published By Publication Date Number of Pages ASME 2018…
