ASTM-D6304 2007
$40.63
D6304-07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
| Published By | Publication Date | Number of Pages |
| ASTM | 2007 | 6 |
1.1 This test method covers the direct determination of water in the range of 10 to 25 000 mg/kg entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S or H 2 S), sulfur, and other compounds are known to interfere with this test method (see Section 5).
1.2 This test method is intended for use with commercially available coulometric Karl Fischer reagents and for the determination of water in additives, lube oils, base oils, automatic transmission fluids, hydrocarbon solvents, and other petroleum products. By proper choice of the sample size, this test method may be used for the determination of water from mg/kg to percent level concentrations.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurements are included in this standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Summary of Test Method Significance and Use Interferences |
| 2 | Apparatus Reagents and Materials Sampling TABLE 1 |
| 3 | Preparation of Apparatus Calibration and Standardization Procedure A (by Mass) Procedure B (by Volume) |
| 4 | Procedure C (Water Evaporator Accessory) Quality Control Checks Calculation Report Precision and Bias |
| 5 | Keywords X1. HELPFUL HINTS FOR COULOMETRIC KARL FISCHER WATER ANALYSIS X1.1 |
Related products
-
ASTM-D6354 2017
D6354-12(2017) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in…
-
ASTM-D6394 2007
D6394-07 Standard Specification for Sulfone Plastics (SP) Published By Publication Date Number of Pages ASTM…
-
ASTM-D5304 2002
D5304-02 Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure Published By…
-
ASTM-D6340 2007
D6340-98(2007) Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous…
-
ASTM-D6704 2001
D6704-01 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material Published…
-
ASTM-D6306 2017
D6306-17 Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor…
-
ASTM-D6604 2009(Redline)
D6604-00(2009)e1 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry (Redline)…
-
ASTM-D6034 2017
D6034-17 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in…
-
ASTM-D4304 2017
D4304-17 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines…
-
ASTM-D6204 2007(Redline)
D6204-07 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers (Redline)…
-
ASTM-D6704 2008
D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material Published…
-
ASTM-D6804 2007
D6804-02(2007) Standard Guide for Hand Hole Design in Corrugated Boxes Published By Publication Date Number…
-
ASTM-D6504 2007
D6504-07 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water Published By…
-
ASTM-D5304 2003
D5304-03 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure Published…
-
ASTM-D6300 2017
D6300-17a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods…
-
ASTM-D6300 2008
D6300-08 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods…
-
ASTM-D6302 2004
D6302-98(2004) Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins Published By Publication…
-
ASTM-D6394 2003
D6394-03 Standard Specification for Sulfone Plastics (SP) Published By Publication Date Number of Pages ASTM…
-
ASTM-D5304 2006
D5304-06 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure Published…
-
ASTM-D6334 2007(Redline)
D6334-07 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Redline) Published…
-
ASTM-D6305 2002
D6305-02e1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing…
-
ASTM-D6304 2004
D6304-04a Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives…
-
ASTM-D6300 2007
D6300-07 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods…
-
ASTM-D6305 2002
D6305-02 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing…
-
ASTM-D6354 2008
D6354-98(2008) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in…
-
ASTM-D6300 2006
D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods…
-
ASTM-D4304 2006
D4304-06 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines Published By…
-
ASTM-D6204 2007
D6204-07 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers Published…
-
ASTM-D6304 2004
D6304-04ae1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives…
-
ASTM-D6404 2009
D6404-99(2009) Standard Practice for Sampling Vegetable Materials Containing Tannin Published By Publication Date Number of…
-
ASTM-D6305 2008(Redline)
D6305-08 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing…
-
ASTM-D6304 2007(Redline)
D6304-07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives…
-
ASTM-D6604 2000
D6604-00 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry Published…
-
ASTM-D6904 2007
D6904-03(2007) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry Published…
-
ASTM-D6504 2000
D6504-00 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water Published By…
-
ASTM-D6384 2017(Redline)
D6384-17 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants (Redline) Published By Publication Date…
-
ASTM-D7304 2006
D7304-06 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC Published…
-
ASTM-D6334 2007
D6334-07 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence Published By…
-
ASTM-D6324 2008(Redline)
D6324-08 Standard Test Methods for Male Condoms Made from Polyurethane (Redline) Published By Publication Date…
-
ASTM-D4304 2017(Redline)
D4304-17 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines…
