BS EN 16712-4:2018
$102.76
Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Portable foam equipment – High expansion foam generators PN16
Published By | Publication Date | Number of Pages |
BSI | 2018 | 22 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This document applies to high expansion foam generators, having an expansion ratio greater than 200:1, whose only source of external power is the pressure and/or flow of the water supply to the device. This is used by fire and rescue services and contains their specification and test procedures. NOTE In this document, the term”foam generator” also refers to “high expansion foam generator”. 1.2 This document deals with all significant hazards, hazardous situations or hazardous events, with the exception of noise, relevant to high expansion foam generator, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. 1.3 This document does not cover misting applications. 1.4 This document is not applicable to high expansion foam generators which have been manufactured before its date of publication as EN.
Status | Under Review |
---|---|
Pages | 22 |
Publication Date | 2018-08-29 |
ISBN | 978 0 580 93483 4 |
Standard Number | BS EN 16712-4:2018 |
Title | Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Portable foam equipment – High expansion foam generators PN16 |
Identical National Standard Of | EN 16712-4:2018 |
Descriptors | Pumps, Foam fire extinguishers, Firefighting, Hazards, Product specification, Portable, Extinction, Fire extinguishers, Firefighting equipment |
Publisher | BSI |
Committee | FSH/17 |
ICS Codes | 13.220.10 - Fire-fighting |
Related products
-
BSI 17/30338129 DC:2017 Edition
BS EN 16712-4. Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Portable foam…
-
BS EN 62271-209:2007:2008 Edition
High-voltage switchgear and controlgear – Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above…
-
BS EN 16732:2015:2017 Edition
Slide fasteners (zips). Specification Published By Publication Date Number of Pages BSI 2017 44
-
BS EN 16712-3:2015
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment –…
-
BS EN 16712-1:2015
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment –…
-
BS EN ISO 17718:2014:2015 Edition
Wholemeal and flour from wheat (Triticum aestivum L.). Determination of rheological behaviour as a function…
-
BS EN 16714-2:2016
Non-destructive testing. Thermographic testing – Equipment Published By Publication Date Number of Pages BSI 2016…
-
BS EN ISO 19712-3:2013
Plastics. Decorative solid surfacing materials – Determination of properties. Solid surface shapes Published By Publication…
-
BS EN ISO 16212:2011
Cosmetics. Microbiology. Enumeration of yeast and mould Published By Publication Date Number of Pages BSI…
-
BS EN 16715:2015
Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate…
-
BS EN 16711-1:2015
Textiles. Determination of metal content – Determination of metals using microwave digestion Published By Publication…
-
BS EN 16012:2012+A1:2015
Thermal insulation for buildings. Reflective insulation products. Determination of the declared thermal performance Published By…
-
BS EN 1712:1997:2004 Edition
Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels Published By Publication Date…
-
BS EN ISO 16212:2017
Cosmetics. Microbiology. Enumeration of yeast and mould Published By Publication Date Number of Pages BSI…
-
BS EN ISO 19712-2:2013
Plastics. Decorative solid surfacing materials – Determination of properties. Sheet goods Published By Publication Date…
-
BS EN 16714-1:2016
Non-destructive testing. Thermographic testing – General principles Published By Publication Date Number of Pages BSI…
-
BS EN 16714-3:2016
Non-destructive testing. Thermographic testing – Terms and definitions Published By Publication Date Number of Pages…
-
BS EN 16713-1:2016
Domestic swimming pools. Water systems – Filtration systems. Requirements and test methods Published By Publication…
-
BSI 14/30288142 DC:2014 Edition
BS EN 16716. Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods Published By…
-
BS EN 16718:2015:2016 Edition
Wood and wood based products. Dosage of the total organic carbon (TOC) in wood and…
-
BS EN 16772:2016
Water quality. Guidance on methods for sampling invertebrates in the hyporheic zone of rivers Published…
-
BS EN 16716:2017
Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods Published By Publication Date Number…
-
BS EN 16312:2013
Intelligent transport systems. Automatic Vehicle and Equipment Registration (AVI/AEI). Interoperable application profile for AVI/AEI and…
-
BS EN 16812:2016
Textiles and textile products. Electrically conductive textiles. Determination of the linear electrical resistance of conductive…
-
BS EN 16752:2015
Centrifugal pumps. Test procedure for seal packings Published By Publication Date Number of Pages BSI…
-
BS EN 16713-2:2016
Domestic swimming pools. Water systems – Circulation systems. Requirements and test methods Published By Publication…
-
BS EN 16713-3:2016
Domestic swimming pools. Water systems – Water treatment. Requirements Published By Publication Date Number of…
-
BS EN ISO 16012:2015:2016 Edition
Plastics. Determination of linear dimensions of test specimens Published By Publication Date Number of Pages…
-
BSI 13/30281354 DC:2013 Edition
BS EN 16612. Glass in building. Determination of the load resistance of glass panes by…
-
BS EN 16212:2012
Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods Published By Publication Date Number of…
-
BS EN 16719:2018
Transport platforms Published By Publication Date Number of Pages BSI 2018 82
-
BS EN 16722:2015
Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends Published By Publication Date…
-
BS EN ISO 11666:2010:2011 Edition
Non-destructive testing of welds. Ultrasonic testing. Acceptance levels Published By Publication Date Number of Pages…
-
BS EN ISO 19712-1:2013
Plastics. Decorative solid surfacing materials – Classification and specifications Published By Publication Date Number of…
-
BS EN 16782:2016
Conservation of cultural heritage. Cleaning of porous inorganic materials. Laser cleaning techniques for cultural heritage…
-
BS EN 16712-2:2015
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment –…
-
BS EN 16710-2:2016
Ergonomics methods – A methodology for work analysis to support design Published By Publication Date…
-
BSI 18/30374737 DC:2018 Edition
BS EN 16713-2. Domestic swimming pools. Water systems – Part 2. Circulation systems. Requirements and…
-
BS EN ISO 19712-3:2022
Plastics. Decorative solid surfacing materials – Determination of properties. Solid surface shapes Published By Publication…
-
BS EN 16711-2:2015
Textiles. Determination of metal content – Determination of metals extracted by acidic artificial perspiration solution…