BS EN 4644-133:2016
$86.31
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous – Size 3 receptacle for rack and panel application, class C and D. Product Standard
Published By | Publication Date | Number of Pages |
BSI | 2016 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This European Standard specifies the size 3 receptacle for rack and panel application used in the family of modular rectangular electrical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-131.
PDF Catalog
PDF Pages | PDF Title |
---|---|
4 | Contents Page |
5 | European Foreword |
6 | 1 Scope 2 Normative references 3 Terms and definitions 4 Required characteristics 4.1 Dimensions and recommended panel cut out |
9 | 4.2 Mass 4.3 Panel cut-out coding |
11 | 5 Designation 6 Marking 7 Technical specification |
Status | Confirmed |
---|---|
Pages | 14 |
Publication Date | 2016-04-30 |
ISBN | 978 0 580 90784 5 |
Standard Number | BS EN 4644-133:2016 |
Title | Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous – Size 3 receptacle for rack and panel application, class C and D. Product Standard |
Identical National Standard Of | EN 4644-133:2016 |
Replaces | BS EN 4644-133:2011 |
Descriptors | Aircraft components, Air transport engineering, Optical fibres, Electrical connections, Fibre optic connectors, Test methods, Electrical testing, Electric connectors |
Publisher | BSI |
Committee | ACE/6 |
ICS Codes | 49.090 - On-board equipment and instruments |
Related products
-
BS EN 4644-014:2015
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or…
-
BS EN 4674-003:2017
Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve – Open sleeve. Inside pressurized…
-
BS EN ISO 14644-10:2022
Cleanrooms and associated controlled environments – Part 10: Assessment of surface cleanliness for chemical contamination…
-
BS EN ISO 4624:2023 – TC
Tracked Changes. Paints and varnishes. Pull-off test for adhesion Published By Publication Date Number of…
-
BS EN ISO 1133:2005
Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of…
-
BS EN ISO 4624:2016
Paints and varnishes. Pull-off test for adhesion Published By Publication Date Number of Pages BSI…
-
BS EN 4694:2017
Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F Published By…
-
BS EN ISO 14644-14:2016
ENISO 14644-14 environments — Assessment of suitability of equipment and materials for cleanrooms – Assessment…
-
BS EN ISO 4684:2005 2006
Leather. Chemical tests. Determination of volatile matter Published By Publication Date Number of Pages BSI…
-
BS EN 4641-103:2010
Aerospace series. Cables, optical 125 μm diameter cladding – Semi-loose, ruggedized simplex construction 62,5/125 μm…
-
BS EN 4674-002:2015
Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve – General and list of…
-
BS EN IEC 60730-2-15:2019
Automatic electrical controls – Particular requirements for automatic electrical air flow, water flow and water…
-
BS EN IEC 60730-2-15:2019
Automatic electrical controls – Particular requirements for automatic electrical air flow, water flow and water…
-
BS EN ISO 14644-13:2017
Cleanrooms and associated controlled environments – Cleaning of surfaces to achieve defined levels of cleanliness…
-
BS EN ISO 14644-10:2013
Cleanrooms and associated controlled environments – Part 10: Classification of surface cleanliness by chemical concentration…
-
BS EN ISO 4044:2008
Leather. Chemical tests. Preparation of chemical test samples Published By Publication Date Number of Pages…
-
BS EN 61968-9:2014
Application integration at electric utilities. System interfaces for distribution management – Interfaces for meter reading…
-
BS EN 4644-131:2015:2016 Edition
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or…
-
BS EN 4674-003:2015
Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve – Open sleeve. Inside pressurized…
-
BS EN 4644-131:2015:2016 Edition
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN ISO 4624:2003
Paints and varnishes. Pull-off test for adhesion Published By Publication Date Number of Pages BSI…
-
BS EN 4604-010:2009
Aerospace series. Cable, electrical, for signal transmission – Cable, coaxial, 50 ohms, 200 °C, Type…
-
BS EN 50549-1:2019
Requirements for generating plants to be connected in parallel with distribution networks – Connection to…
-
BS EN 4644-014:2015
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or…
-
BS EN 4644-131:2011
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or…
-
BS EN ISO 11833-1:2019
Plastics. Unplasticized poly(vinyl chloride) sheets – Types, dimensions and characteristics for sheets of thickness not…
-
BS EN ISO 4624:2016 – TC:2020 Edition
Tracked Changes. Paints and varnishes. Pull-off test for adhesion Published By Publication Date Number of…
-
BSI 19/30398510 DC:2019 Edition
BS EN 4844. Aerospace series. Screw, 100° countersunk normal head, Spiral Drive Recess, threaded to…
-
BS EN ISO 4674-1:2016
Rubber- or plastics-coated fabrics. Determination of tear resistance – Constant rate of tear methods Published…
-
BS EN ISO 4044:2017
Leather. Chemical tests. Preparation of chemical test samples Published By Publication Date Number of Pages…
-
BS EN 50549-1:2019
Requirements for generating plants to be connected in parallel with distribution networks – Connection to…
-
BS EN 4674-001:2017
Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve – Technical specification Published By…
-
BS EN 4644-133:2011
Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or…
-
BS EN ISO 11833-1:2012
Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics – Sheets of thickness not less…
-
BS EN ISO 14644-8:2022
Cleanrooms and associated controlled environments – Assessment of air cleanliness by chemical concentration (ACC) Published…
-
BS EN ISO 4674-1:2003
Rubber- or plastics-coated fabrics. Determination of tear resistance – Constant rate of tear methods Published…
-
BSI 16/30346719 DC:2016 Edition
BS EN 4604-010. Aerospace series. Cable, electrical, for signal transmission. Part 010. Cable, coaxial, light…
-
BSI 18/30366591 DC:2018 Edition
BS EN 60335-2-30 AMD AC. Household and similar electrical appliances. Safety – Part 2-30. Particular…
-
BS EN ISO 14644-8:2022
Cleanrooms and associated controlled environments – Assessment of air cleanliness by chemical concentration (ACC) Published…