ACI 548.10M 10:2010 Edition
$22.48
548.10M-10 Metric Specification for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage
| Published By | Publication Date | Number of Pages |
| ACI | 2010 | 10 |
This Specification covers methyl methacrylate slurry (MMS) overlays for bridge and parking garage decks. Type MMS polymer overlay incorporates methyl methacrylate-based primer, binder, and top coat with selected filler and aggregate to produce a flexible, skid-resistant, and water-resistant slurry overlay. The overlay is used for both new construction and rehabilitation. The overlay is placed by applying the polymer slurry system to the surface and broadcasting aggregate. This Specification includes requirements for chemical components, aggregates, storage and handling, surface preparation, surface profile, mixing, placement, finishing, and quality control. The materials, processes, quality control measures, and inspections described in this document should be tested, monitored, or performed as applicable only by individuals with appropriate ACI certifications or equivalent. Keywords: aggregate; bridge decks; methyl methacrylate; mortar; overlays; parking garage decks; polymer; premixed; resin; slurry.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 3 | CONTENTS |
| 4 | SECTION 1— GENERAL 1.1— Scope 1.1.1 1.1.2 1.1.3 Units 1.2—Definitions 1.3—Reference standards 1.3.1 ASTM International 1.3.2 Field reference 1.3.3 Reference organizations 1.4—Submittals 1.4.1 |
| 5 | 1.4.2 1.4.3 1.5—Project conditions 1.5.1 Cold weather limits 1.5.2 Hot weather limits 1.5.3 Moisture limits 1.5.4 Dew point limit 1.6—Labeling, storage, and handling of materials 1.6.1 Labeling 1.6.2 Storage 1.7—Safety SECTION 2— PRODUCTS 2.1— Methyl methacrylate- based primer 2.2—Methyl methacrylate-based binder 2.3—Filler 2.4—Methyl methacrylate-based top coat 2.5—Aggregate |
| 6 | 2.6—Polymer overlay slurry SECTION 3— EXECUTION 3.1— Procedure qualification 3.1.1 Equipment 3.1.2 Quality control procedure qualification 3.1.2.1 3.1.2.2 3.1.2.3 3.1.2.4 3.1.2.5 3.1.2.6 3.1.3 Quality control of surface preparation 3.2—Surface preparation 3.2.1 3.2.2 |
| 7 | 3.2.3 3.2.4 3.3—Mixing methyl methacrylate-based primer, binder- filler slurry, and top coat 3.3.1 Primer 3.3.2 Binder-filler slurry 3.3.3 Top coat 3.4—Overlay application 3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 Priming 3.4.6 Methyl methacrylate-based slurry placement 3.4.7 Aggregate broadcasting 3.4.8 Top coating 3.5—Curing 3.6—Excess aggregate removal 3.7—Joints 3.8—Open to traffic NOTES TO SPECIFIER General notes G1. G2. G3. G4. |
| 8 | G5. FOREWORD TO CHECKLISTS F1. F2. F3. F4. F5. MANDATORY REQUIREMENTS CHECKLIST SUBMITTALS CHECKLIST |
