AS 2452.3:2005
$27.30
Non-destructive testing – Determination of thickness – Use of ultrasonic testing
| Published By | Publication Date | Number of Pages |
| AS | 2005-11-16 | 24 |
Specifies six methods for the determination of thickness of material based on the use of ultrasonic pulse-echo principles where scanning and reflecting surfaces are substantially parallel.
Scope
This Standard specifies six methods for the determination of thickness of material based on the use of ultrasonic pulse-echo principles where scanning and reflecting surfaces are substantially parallel. The methods are as follows:
(a) Single spot-single measurement (SS).
(b) Single spot-double measurement (SD).
(c) Multiple spot measurements (MS).
(d) Close grid survey method (CG).
(e) Open grid method (OG).
(f) Scanning runs (SR).
(g) Complete coverage method (CC).
NOTES:
1 Appendix A provides guidelines on information to be provided to the manufacturer at the time of enquiry.
2 Factors affecting the results and order of accuracy achieved are given in Appendix D.
Related products
-
AS 2428.3:2004 (R2016)
Methods of testing smoke/heat release vents – Determination of operating characteristics Published By Publication Dateā¦
-
AS 2832.3:2005 (R2016)
Cathodic protection of metals – Fixed immersed structures Published By Publication Date Number of Pagesā¦
-
AS 2582.3:2003 (R2020)
Complete, filled transport packages – Methods of test – Stacking tests using a static loadā¦
-
AS/NZS 2442.2:2000 (R2016)
Performance of household electrical appliances – Rotary clothes dryers – Energy labelling requirements Published Byā¦
-
AS/NZS 2632.3:2015
Codes for the representation of names of countries and their subdivisions – Code for formerlyā¦
-
AS 4292.3:2006
Railway safety management – Rolling stock Published By Publication Date Number of Pages AS 2006-11-10ā¦
-
AS 4523:2005
Bonded abrasive products – General requirements Published By Publication Date Number of Pages AS 2005-03-02ā¦
-
ISO 24253-2:2015
MatĆ©riel de protection des cultures ā Essais de dĆ©pĆ“t de la pulvĆ©risation sur les grandesā¦
-
IEEE 1450.3-2007
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Testerā¦
-
AS 2473.3:2007 (R2017)
Valves for compressed gas cylinders – Outlet connections for medical gases (including pin-indexed yoke connections)ā¦
-
AS EN 12442.3:2003
Animal tissues and their derivatives utilized in the manufacture of medical devices – Validation ofā¦
-
AS 2452.1:2004 (R2017)
Non-destructive testing – Determination of thickness – Determination of wall thickness of pipe by theā¦
-
IEEE 1450.3-2007
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Testerā¦
-
AS 4524.3:2005
Bonded abrasive products – Dimensions – Grinding wheels for internal cylindrical grinding Published By Publicationā¦
-
ISO 28523:2009
Ships and marine technology ā Lubricating and hydraulic oil systems ā Guidance for sampling toā¦
-
BS ISO 24293:2009
Water quality. Determination of individual isomers of nonylphenol. Method using solid phase extraction (SPE) andā¦
-
ISO 24213:2008
Metallic materials ā Sheet and strip ā Method for springback evaluation in stretch bending Publishedā¦
-
AS/NZS 2350.3:2006 (R2016)
Methods of testing portland, blended and masonry cements – Normal consistency Published By Publication Dateā¦
-
AS 2932.3:2004 (R2016)
Aluminium ores – Chemical analysis – Determination of loss of mass at 1000Ā°C Published Byā¦
-
IEEE 1451.3-2003
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators – Digital Communication andā¦
-
IEEE 1450.3 2007
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Testerā¦
-
AS/NZS 2455.2:2007
Textile floor coverings – Installation practice – Carpet tiles Published By Publication Date Number ofā¦
-
IEEE 1451.3 2004
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators – Digital Communication andā¦
-
AS/NZS 4492.3:2000
Wool-Fleece testing and measurement – Measurement of mean fibre diameter using Airflow and Sonic Aā¦
-
AS/NZS 4456.3:2003
Masonry units and segmental pavers and flags – Methods of test – Determining dimensions Publishedā¦
-
ISO 24233:2008
Tools for moulding ā Tool specification sheet for diecasting dies Published By Publication Date Numberā¦
-
AS 2550.3:2002
Cranes, hoists and winches – Safe use – Bridge, gantry, portal (including container cranes), jibā¦
-
AS/NZS 2455.1:2007
Textile floor coverings – Installation practice – General Published By Publication Date Number of Pagesā¦
-
AS 2856.3:2000 (R2013)
Coal petrography – Method for microscopical determination of the reflectance of coal macerals Published Byā¦
-
AS 2434.3:2002 (R2013)
Methods for the analysis and testing of lower rank coal and its chars – Lowerā¦
-
AS 2252.2:2009
Controlled environments – Biological safety cabinets Class II – Design Published By Publication Date Numberā¦
-
AS/NZS 2642.3:2008
Polybutylene (PB) plumbing pipe systems – Mechanical jointing fittings for use with polybutylene (PB) pipesā¦
-
AS 4256.3:2006 (R2018)
Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP) Published By Publicationā¦
-
ISO 24293:2009
Water quality ā Determination of individual isomers of nonylphenol ā Method using solid phase extractionā¦
-
AS 2252.2:2004
Biological safety cabinets – Laminar flow biological safety cabinets (Class II) for personnel, environment andā¦
-
AS 2252.1:2002
Biological safety cabinets – Biological safety cabinets (Class I) for personnel and environment protection Publishedā¦
-
ISO 24253-1:2015
MatĆ©riel de protection des cultures ā Essais de dĆ©pĆ“t de la pulvĆ©risation sur les grandesā¦
-
AS 2862.3:2008
Copper, lead, zinc and nickel concentrates – Sampling – Experimental methods for checking the biasā¦
-
ISO 22523:2006
External limb prostheses and external orthoses ā Requirements and test methods Published By Publication Dateā¦
-
AS/NZS 4455.3:2008 (R2020)
Masonry units, pavers, flags and segmental retaining wall units – Segmental retaining wall units Publishedā¦
