AS 3772:2008
$43.55
Pre-engineered fire protection systems for cooking equipment
| Published By | Publication Date | Number of Pages |
| AS | 2008-08-08 | 45 |
Specifies requirements for ancillary fire protection equipment such as portable fire-extinguishers and fire blankets, and performance specifications for pre-engineered fire-protection systems of any agent type, and the requirements for their commissioning and maintenance. Specific requirements for wet chemical systems are given.
Scope
This Standard sets out requirements for the design, installation commissioning and maintenance of pre-engineered fire protection systems for the protection of unenclosed cooking appliances that produce grease-laden vapours and which may have an open surface of cooking oil or fat. This Standard also applies to the grease removal devices, hood exhaust plenums, exhaust systems, ducts and filters associated with such appliances.
General fire safety requirements for kitchens and cooking areas are included.
Protection of enclosed ovens, water boilers and similar appliances are excluded from the scope of this Standard.
NOTES:
1 Requirements for areas protected by sprinklers are given in AS 2118.1.
2 Requirements for engineered fire protection systems such as carbon dioxide and water mist, are given in other Australian Standards.
3 Examples of equipment this Standard covers are-
(a) deep fryers;
(b) griddles;
(c) grillers;
(d) range tops;
(e) broilers;
(f) woks;
(g) tilting skillets;
(h) salamanders; and
(i) brazing pans.
Related products
-
UNE-EN 3672:2008
Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver…
-
ISO 3272-6:2000
Microfilming of technical drawings and other drawing office documents — Part 6: Quality criteria and…
-
ISO 3272-1:2003
Microfilming of technical drawings and other drawing office documents — Part 1: Operating procedures Published…
-
AS 3777:2008 (R2019)
Shank hooks and large eye hooks – Maximum 60 t Published By Publication Date Number…
-
ASTM-D3772 2005
D3772-01(2005) Standard Specification for Natural Rubber Finger Cots Published By Publication Date Number of Pages…
-
ASTM-D772 2000
D772-86(2000) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints Published By…
-
ISO 7372:2005
Trade data interchange — Trade data elements directory Published By Publication Date Number of Pages…
-
ASTM-A772 2000
A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current Published By…
-
ISO 13772:2018
Matériel forestier — Scies à chaîne portatives — Performance du frein de chaîne automatique Published…
-
ASTM-B772 2008
B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)…
-
ASTM-A772 2005
A772/A772M-00(2005) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current Published By…
-
ASTM-D772 2018(Redline)
D772-18 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints (Redline) Published…
-
BS EN 3782:2008
Aerospace series. Holes for 100° countersunk head screws. Design standard Published By Publication Date Number…
-
BS ISO 9772:2001:2004 Edition
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame…
-
BS EN 3712:2007:2008 Edition
Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium…
-
BS ISO 3776-2:2007 2008
Tractors and machinery for agriculture. Seat belts – Anchorage strength requirements Published By Publication Date…
-
AS 4772:2008
Earth-moving machinery – Quickhitches for excavators and backhoe loaders Published By Publication Date Number of…
-
ASTM-E772 2001
E772-87(2001) Standard Terminology Relating to Solar Energy Conversion Published By Publication Date Number of Pages…
-
ISO 13772:2009
Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance Published By Publication Date…
-
ASTM-B772 2003
B772-97(2003) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)…
-
BS EN 3672:2008 2009
Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated,…
-
ASTM-E772 2005
E772-05 Standard Terminology Relating to Solar Energy Conversion Published By Publication Date Number of Pages…
-
ISO 3779:2009
Road vehicles — Vehicle identification number (VIN) — Content and structure Published By Publication Date…
-
BS EN 3872:2005
Aerospace series. Aluminium alloy AL-R39002-H112. Die forgings. a ≤ 200mm Published By Publication Date Number…
-
ISO 3727-3:2003
Beurre — Détermination des teneurs en eau, en matière sèche non grasse et en matière…
-
BS ISO 3772:2000 2001
Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements Published By…
-
ASTM-D772 2018
D772-18 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints Published By…
-
API PUBL 4772-2008
Measuring Particulate Emissions from Combustion Sources Published By Publication Date Number of Pages API 2008…
-
UNE-EN 3727:2006
Aerospace series – Bearings, airframe rolling rigid with flanged alignment housing – Technical specification Published…
-
ASTM-C772 2003
C772-03 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants Published…
-
UNE-EN 3782:2008
Aerospace series – Holes for 100° countersunk head screws – Design standard Published By Publication…
-
EIA 772-A-2008
User’s Application Guide to Fuses Published By Publication Date Number of Pages ECIA 2008 18
-
ASTM-D3772 2001
D3772-01 Standard Specification for Natural Rubber Finger Cots Published By Publication Date Number of Pages…
-
ASTM-D772 2005
D772-86(2005) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints Published By…
-
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE) Published By Publication…
-
AS/NZS 3752:2006
Welding and allied processes – Determination of hydrogen content in ferritic steel arc weld metal…
-
ASTM-C772 2009(Redline)
C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants (Redline)…
-
BS EN 3972:2006 2007
Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De…
-
ASTM-C772 2009
C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants Published…
-
ISO 3732:2003
Véhicules routiers — Connecteurs pour liaisons électriques entre véhicules tracteurs et véhicules tractés — Connecteur…
