{"id":464553,"date":"2024-10-20T10:35:22","date_gmt":"2024-10-20T10:35:22","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/astm-f1155-6\/"},"modified":"2024-10-26T19:31:20","modified_gmt":"2024-10-26T19:31:20","slug":"astm-f1155-6","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/astm\/astm-f1155-6\/","title":{"rendered":"ASTM-F1155"},"content":{"rendered":"

ASTM F1155-10-Reapproved2024<\/h3>\n

Active Standard: Standard Practice for Selection and Application of Piping System Materials<\/h4>\n
\n

ASTM F1155<\/h4>\n

Scope<\/strong><\/p>\n

\n

1.1<\/span> This practice is intended as a guide to shipbuilders, shipowners, and design agents for use in the preparation of piping system material schedules for commercial ship design and construction.<\/p>\n<\/p><\/div>\n

\n

1.2<\/span> The materials and limitations listed in Tables 1-<\/span>28<\/span> meet the minimum requirements of the U.S. Coast Guard and the American Bureau of Shipping and, except for titanium, should be considered to be the minimum acceptable materials in regard to material, design, and testing. This document is not intended to limit the selection of material strictly to those listed. Other equal or superior materials may be used provided that they are acceptable to the regulatory bodies and classification societies.<\/p>\n

\n

Note 1:<\/span> Titanium has been added as its use in fresh and sea water systems is becoming more common.<\/span><\/p>\n<\/p><\/div>\n<\/p><\/div>\n

\n

1.3<\/span> This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.<\/i><\/p>\n<\/p><\/div>\n

Keywords<\/strong><\/p>\n

materials; piping systems; piping systems materials; ship construction; ship design<\/p>\n

Material \u2003\u2003\u2003\u2003Material Specifications Temperature Limit, \u00b0F, max Corrosion resistant ASTM GR8, 8C, 8T1200\u2003steelASTM GR 8F\u2002800ASME SA312 TP316L\u2002850ASME SA312 TP 304L\u2002800ASTM GR CF3M \u2002850 Chrome-molybdenum ASTM GR F6a, F111100\u2003steel ASTM GR B161100ASTM GF B71000ASTM GR 4\u2002900ASME SA217 GR WC61100ASTM GR WP111100ASTM GR P111100ASTM 1000 Carbon steel ASTM TYS\u2002800ASTM TY E\u2002650ASTM \u2002800ASTM \u2002800ASTM GR 285C (straight seam)\u2002300ASTM GR 285C (spiral seam)\u2002200ASTM GR B (straight seam)\u2002300ASTM GR B (spiral seam)\u2002200ASTM \u2002800ASTM GR 2H\u2002800ASTM GR WCB1000ASTM GR WPB\u2002800ASTM \u2002400ASTM GR 70 \u2002800 Ductile ironASTM \u2002650 ASTM \u2002450Bronze ASME SB61\u2002550ASME SB62\u2002406 Copper nickel alloy ASME SB466 C70600\u2002600ASME SB467 C70600 \u2002600 Copper ASTM TY K or L\u2002400ASME SB75 \u2002400 Glass reinforced ASTM GR 1\u2002225\u2003plastic ASTM GR 1225ASTM GR 1 225CP TitaniumASTM (Castings)\u2002600\u2003Grades 1, 2, 3, 4, 7, 11, 12ASTM (Forgings)\u2002600ASTM (Seamless Pipe)\u2002600ASTM (Seamless & Welded Tube)\u2002600ASTM (Welded Pipe)\u2002600ASTM (Strip, Sheet and Plate)\u2002600ASTM (Bar and Billet)\u2002600Maximum temperature limits in accordance with ASME B31.1for all material, except glass reinforced plastic, which is in accordance with NVIC 11-86 and Specification which is in accordance with 46 CFR56. GR\u2014grade. TP\u2014tubular product. TY\u2014type. Upon prolonged exposure to temperatures above 775\u00b0F, the carbide phase or carbon steel may be converted to graphite. Item Type\/Style \u2003Material \u2003\u2003Material Specification Design Specification Maximum Temperature 1100\u00b0FRemarks\/Limitations Pipe Seamless CrMosteel ASTM GRP11ASME B36.10.\u2009.\u2009. Takedown joints Flanges: weld neck orCrMo steel ASTM GR F11ASME B16.5.\u2009.\u2009. \u2003 socket weld Bolting Bolts\/bolt studs CrMoVsteel ASTM GR B16ASME B18.2.1.\u2009.\u2009. Nuts CMosteel ASTM GR 4 ASME B18.2.2.\u2009.\u2009. Fittings Flanged CrMo steel ASME SA217 GR WC6 orASME B16.5.\u2009.\u2009. \u2003 ASTM GR F11Buttweld CrMo steel ASTM GR WP11 ASME B16.9.\u2009.\u2009. \u2003 or B16.28Socket weld CrMo steel ASTM GR F11ASME B16.11.\u2009.\u2009. Valves: gate, globe, \u2003angle, check Flanged or buttweldCrMo steel ASME SA217 GR WC6 orASME B16.34Trim group 1\u2003ASTM GR F11Socket weldCrMo steel ASTM GR F6aASME B16.34.\u2009.\u2009.\u2003or GR F11Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. CrMo\u2014chromium-molybdenum. GR\u2014grade. CrMoV\u2014chromium-molybdenum-vanadium. CMo\u2014carbon-molybdenum. For trim group definition, refer to . Item Type\/Style Material Material Specification Design Specification Maximum Temperature 775\u00b0FRemarks\/Limitations Pipe Seamless or electric\u2003resistance welded Carbon steel ASTM GRBASME B36.10GR B TYE\u2003 or \u2003Limited to a design\u2003 GR B TY S or E \u2003 pressure of 350 psig.\u2003 See also . Takedown joints Flanges: weld neck,\u2003\u2003socket weld or\u2003\u2003slip-on Carbon steel ASTM ASME B16.5\u2003\u2003.\u2009.\u2009. Unions: socket weld Carbon steel ASTM MSS-SP-83\u2003\u2003.\u2009.\u2009. Bolting Bolts\/bolt studs CrMosteel ASTM GR B7ASME B18.2.1\u2003\u2003.\u2009.\u2009. Nuts Carbon steel ASTM GR 2H ASME B18.2.2\u2003\u2003.\u2009.\u2009. Fittings Flanged Carbon steel ASTM GR ASME B16.5\u2003\u2003.\u2009.\u2009. \u2003WCB or Butt weld Carbon steel ASTM GRASME B16.9\u2003\u2003.\u2009.\u2009. \u2003WPB \u2003or B16.28Socket weld Carbon steel ASTM GR ASME B16.11\u2003\u2003.\u2009.\u2009. \u2003WPB or Valves: gate, globe,Flanged or buttweldCarbon steelASTM GR ASME B16.34Trim group 2\u2003angle, check \u2003WCB or Socket weld Carbon steelASTM GR ASME B16.34.\u2009.\u2009. \u2003WPB or Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. CrMo\u2014chromium-molybdenum For trim group definition, refer to . Item Type \u2003\u2003Style Material SpecificationDesign Specification Maximum Temperature 406\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRBASME B36.10GR B TYE\u2003resistance welded \u2003or \u2003limited to a design\u2003GR B TY S or E \u2003pressure of 350 psig Takedown joints Flanges: weld neck, \u2003socket weld or slip-on Carbon steel ASTM ASME B16.5\u2003\u2003\u2003.\u2009.\u2009. Unions: socket weld or\u2003 threaded Carbon steel ASTM MSS-SP-83\u2003\u2003\u2003.\u2009.\u2009. Unions: threaded or\u2003 brazed Bronze ASME SB61 or SB62 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1\u2003\u2003\u2003.\u2009.\u2009. Nuts Carbon steel ASTM GR A ASME B18.2.2\u2003\u2003\u2003.\u2009.\u2009. Fittings Flanged Carbon steel ASTM GRASME B16.5\u2003\u2003\u2003.\u2009.\u2009. \u2003WCB \u2003or Buttweld Carbon steel ASTM GRASME B16.9\u2003\u2003\u2003.\u2009.\u2009. \u2003WPB \u2003or B16.28Socket weld Carbon steel ASTM GR ASME B16.11\u2003\u2003\u2003.\u2009.\u2009. \u2003WPB or Sleeve couplings Carbon steel ASTM GRASTM \u2003\u2003\u2003.\u2009.\u2009. \u2003WPB Threaded or brazed Bronze ASME SB61 or SB62 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Valves: gate, globe,FlangedDuctile ironASTM ASME B16.34Trim group 3 and 4\u2003angle, check Flanged or buttweldCarbon steelASTM GRASME B16.34\u2003\u2003\u2003.\u2009.\u2009. \u2003WCB or \u2009\u2009ASTM ASME B16.34\u2009Socket weldCarbon steelASME SB61 or SB62 MSS-SP-80\u2003\u2003\u2003.\u2009.\u2009. Threaded or brazed Bronze \u2003\u2003\u2003.\u2009.\u2009. When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style \u2003\u2003Material Material Specification Design Specification Maximum Temperature 1100\u00b0FRemarks\/Limitations Pipe Seamless CrMo steelASTM GRP11ASME B36.10.\u2009.\u2009. Plate formed CrMo steel ASTM Commercial.\u2009.\u2009. Takedown joints Flanges: weld neck or\u2003 socket weld CrMo steel ASTM GR F11ASME B16.5.\u2009.\u2009. Flanges: plate CrMo steel ASTM Commercial.\u2009.\u2009. Bolting Bolts\/bolt studs CrMoVsteel ASTM GR B16ASME B18.2.1.\u2009.\u2009. Nuts CMosteel ASTM GR 4 ASME B18.2.2.\u2009.\u2009. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. CrMo\u2014chromium-molybdenum. GR\u2014grade. Specific Coast Guard and ABS approval for design required. CrMoV\u2014chromium-molybdenum-vanadium. CMo\u2014carbon-molybdenum. Item Type\/Style Material Material Specification Design Specification Maximum Temperature 775\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRBASME B36.10See \u2003 resistance welded \u2003 or \u2003 GR B TY S or E Takedown joints Flanges: weld neck, \u2003socket weld or slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Flanges: plate Carbon steel ASTM GR 70 Commercial.\u2009.\u2009. Bolting Bolts\/bolt studs CrMosteel ASTM GR B7ASME B18.2.1.\u2009.\u2009. Nuts Carbon steel ASTM GR 2H ASME B18.2.2.\u2009.\u2009. Fittings Flanged Carbon steel ASTM GRASME B16.5.\u2009.\u2009. \u2003WCB or Buttweld Carbon steel ASTM GRASME B16.9.\u2009.\u2009. \u2003WPB \u2003 or B16.28Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. Specific Coast Guard and ABS approval required. CrMo\u2014chromium-molybdenum. Item Type\/Style Material Material SpecificationDesign Specification Maximum Temperature240\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRB orASME B36.10\u2003\u2003\u2003.\u2009.\u2009. \u2003 resistance welded \u2003GR B TYS or E CP TitaniumASTM \/ ASME SB861Grade 2ASTM \/ ASME SB862Filament woundFGPASTM GR 1CommercialSee and NVIC Centrifugally cast FGPASTM GR1 Commercial\u200311-86Takedown joints Flanges: socket weld or\u2003 slip-on Carbon steel ASTM ASME B16.5\u2003\u2003\u2003.\u2009.\u2009. Unions: socket weld or\u2003 threaded Carbon steel ASTM MSS-SP-83\u2003\u2003\u2003.\u2009.\u2009. Unions: threaded or\u2003 brazed Bronze ASME SB61 or SB62 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Flanges: adhesive\u2003 bonded GRPASTM GR 1 ASTM \u2003\u2003\u2003.\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM \u2003\u2003\u2003.\u2009.\u2009.Flanges:CP TitaniumASTM \/ ASME SB381ASME B16.5Blind, Weld Neck(Dimensions only)Slip-On, Threaded PipeFigure 8 BlanksCP TitaniumASME B16.5ASME B16.48(Dimensions only)Spectacle BlindsCP TitaniumPipe Fitters Bluebook(Dimensions only)Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1\u2003\u2003\u2003.\u2009.\u2009. CP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381Nuts ASTM GR A ASME B18.2.2\u2003\u2003\u2003.\u2009.\u2009. CP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381WashersCP TitaniumASTM \/ ASME SB2651, 2, 3, 4, 7, 11, 12Per Request Only:Bolt\/Bolt StudsCP TitaniumASTM (Bolts)2, 3, 4, 7, 12NutsCP Titanium2, 3, 4, 7, 12ASTM (Nuts)Plain Washers andCP TitaniumASME B18.21.1Lock Washers1, 2, 3, 4, 7, 11, 12ASME B18.22.1Fittings Flanged Carbon steel ASTM GR WCBASME B16.5\u2003\u2003\u2003.\u2009.\u2009. \u2003or Buttweld Carbon steel ASTM GR WPB ASME B16.9\u2003\u2003\u2003.\u2009.\u2009. \u2003or B16.28Socket weld or threaded Carbon steel ASTM GR WPB ASME B16.9\u2003\u2003\u2003.\u2009.\u2009. \u2003or B16.28Sleeve couplings Carbon steel ASTM GR WPB ASTM \u2003\u2003\u2003.\u2009.\u2009. Threaded or brazed Bronze ASME SB61 or SB62 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Adhesive bonded GRPCommercial Commercial\u2003\u2003\u2003.\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile iron\u2003\u2003\u2003.\u2009.\u2009.ButtweldCP TitaniumASTM \/ ASME SB363ASME B16.9Elbows, Tees, Caps, 1, 2, 3, 4, 7, 12MSS SP-43& Reducers(Dimensions only)Socket-Welding or CP TitaniumASTM \/ ASME SB381ASME B16.11Threaded Elbows, Tees,1, 2, 3, 4, 7, 12MSS SP-97Couplings, Bushings(Dimensions only)PlugsCP TitaniumASTM \/ ASME SB381ASME B16.11(Dimensions only)MSS SP-97UnionsCP TitaniumASTM \/ ASME SB381MSS SP-83(Dimensions only)NipplesCP TitaniumASTM \/ ASME SB861MSS SP-83ASTM \/ ASME SB862(Dimensions only)Belled End Socket- CP TitaniumASTM \/ ASME SB363MSS SP-119Welding Elbows, Tees, (Dimensions only)Couplings, Reducers,CapsThreaded, Socket-CP TitaniumASTM \/ ASME SB381MSS SP-97Welding, and(Dimensions only)Buttwelding OutletsValves Butterfly wafer or lug\u2003 type Ductile iron ASTM MSS-SP-67Trim group 4Butterfly grooved\u2003endDuctile ironASTM \u2003\u2003\u2003.\u2009.\u2009.Trim group 4Valves: gate, globe,FlangedDuctile ironASTM ASME B16.34Trim group 4\u2003angle, check Flanged or buttweld Carbon steelASTM GR WCBASME B16.34Trim group 3 and 4\u2003or Socket weld Carbon steel ASTM ASME B16.34Trim group 3 and 4Threaded or brazed Bronze ASME SB61 or SB62 MSS-SP-80Trim group 3 and 4Grooved endDuctile ironASTM \u2003\u2003\u2003.\u2009.\u2009.Trim group 3 and 4Valves: ball Flanged or buttweld Carbon steel ASTM GR WCBMSS-SP-72Trim group 3 and 4\u2003or \u2003or When combining dissimilar materials, galvanic corrosion can occur especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style Material Material SpecificationDesign Specification Maximum Temperature 240\u00b0FRemarks\/Limitations Pipe Seamless Copper ASTM TYK or L ASTM Hard drawn. Must be\u2003annealed for pressures \u2003greater than 225 psig. Filament wound FGPASTM GR1 CommercialSee and NVIC \u200311-86Centrifugally cast FGPASTM GR 1 CommercialSee and NVIC \u200311-86Seamless or electric CP TitaniumASTM \/ ASME SB861Resistance weldedGrade 2ASTM \/ ASME SB862Takedown joints Flanges: silbraze Bronze ASME SB862 ASME B16.24\u2003\u2003\u2003.\u2009.\u2009. Unions: brazed or\u2003threaded Bronze ASME SB861 or SB862 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Flanges: adhesive bonded GRPASTM GR 1 ASTM \u2003\u2003\u2003.\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM \u2003\u2003\u2003.\u2009.\u2009. Flanges: CP TitaniumASTM \/ ASME SB381ASME B16.5Blind, Weld Neck (Dimensions only)Slip-On, Threaded PipeFigure 8 BlanksCP TitaniumASME B16.5ASME B16.48(Dimensions only)Spectacle BlindsCP TitaniumPipe Fitters Bluebook(Dimensions only)Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1\u2003\u2003\u2003.\u2009.\u2009. Nuts Carbon steel ASTM GR A ASME B18.2.2\u2003\u2003\u2003.\u2009.\u2009. Bolts\/Bolt StudsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381NutsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381WashersCP TitaniumASTM \/ ASME SB2651, 2, 3, 4, 7, 11, 12Per Request only:Bolts\/Bolt StudsCP TitaniumASTM (Bolts)2, 3, 4, 7, 12NutsCP TitaniumASTM (Nuts)2, 3, 4, 7, 12Plain Washers &CP TitaniumASME B18.21.1Lock Washers1, 2, 3, 4, 7, 12ASME B18.22.1Fittings Silbraze Copper ASME SB88 TY K or L ASME B16.22\u2003\u2003\u2003.\u2009.\u2009. Adhesive bonded GRPCommercial Commercial\u2003\u2003\u2003.\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings BronzeASTM \u2003or ASTM \u2003\u2003\u2003.\u2009.\u2009.ButtweldCP TitaniumASTM \/ ASME SB363ASME B16.9Elbows, Tees, Caps, MSS SP-43& Reducers1, 2, 3, 4, 7, 12(Dimensions only)Socket-Welding orCP TitaniumASTM \/ ASME SB381ASME B16.11Threaded Elbows, Tees1, 2, 3, 4, 7, 12MSS SP-97Couplings, Bushings (Dimensions only)Plugs CP TitaniumASTM \/ ASME SB381ASME B16.11MSS SP-97(Dimensions only)Unions CP TitaniumASTM \/ ASME SB381MSS SP-83(Dimensions only)NipplesCP TitaniumASTM \/ ASME SB861MSS SP-83ASTM \/ ASME SB862(Dimensions only)Belled End Socket-CP TitaniumASTM \/ ASME SB363MSS SP-119Welding Elbows, Tees,(Dimensions only)Couplings, Reducers,CapsThreaded, Socket-CP TitaniumASTM \/ ASME SB381MSS SP-97Welding, and(Dimensions only)Buttwelding OutletsValves Butterfly wafer or lug Ductile iron ASTM MSS-SP-67Trim group 4Butterfly groovedBronzeASTM \u2003\u2003\u2003.\u2009.\u2009.Trim group 4\u2003end\u2003or Valves: gate, globe, \u2003angle, check Flanged or brazed Bronze ASME SB61 or SB62 MSS-SP-80Trim group 4Valves: ball Flanged Bronze ASME SB61 or SB62 MSS-SP-72Trim group 4When combining dissimilar materials galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. TY\u2014type. FGP\u2014fiberglass pipe. GR\u2014grade. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. Acceptable when gasket isolates coupling housings from fluid.For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style \u2003\u2003Material Material SpecificationDesign Specification Maximum Temperature 150\u00b0FRemarks\/Limitations Pipe Seamless or welded CNA90:10 ASME SB466 or SB467 ASME SB466 or SB467 Filament wound FGPASTM GR1 CommercialSee NVIC 11-86Centrifugally cast FGPASTM GR 1 CommercialSee NVIC 11-86Seamless or electricCP TitaniumASTM \/ ASME SB861Resistance weldedGrade 2ASTM \/ ASME SB862Takedown joints Flanges: brazed Bronze ASME SB62 ASME B16.24\u2003\u2003\u2003.\u2009.\u2009. Unions: brazed Bronze ASME SB61 or SB62 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Flanges: adhesive bonded GRPASTM GR 1 ASTM \u2003\u2003\u2003.\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM \u2003\u2003\u2003.\u2009.\u2009. Flanges: CP TitaniumASTM \/ ASME SB381ASME B16.5Blind, Weld Neck(Dimensions only)Slip-On, Threaded PipeFigure 8 BlanksCP TitaniumASME B16.5ASME B16.48(Dimensions only)Spectacle BlindsCP TitaniumPipe Fitters Bluebook(Dimensions only)Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1\u2003\u2003\u2003.\u2009.\u2009. Nuts Carbon steel ASTM GR A ASME B18.2.2\u2003\u2003\u2003.\u2009.\u2009. Bolts\/Bolt StudsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381NutsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381WashersCP TitaniumASTM \/ ASME SB2651, 2, 3, 4, 7, 11, 12Per Request only:Bolts\/Bolt StudsCP TitaniumASTM (Bolts)2, 3, 4, 7, 12NutsCP TitaniumASTM (Nuts)2, 3, 4, 7, 12Plain Washers & CP TitaniumASME B18.21.1Lock Washers1, 2, 3, 4, 7, 12ASME B18.22.1Fittings Flanged Bronze ASME SB61 or SB62 ASME B16.24\u2003\u2003\u2003.\u2009.\u2009. Buttweld or welding \u2003sleeve CNA 90:10 ASME SB466 or SB467 810-1385880 \u2003\u2003\u2003.\u2009.\u2009. Brazed Bronze ASME SB61 or SB62 MIL-F-1183\u2003\u2003\u2003.\u2009.\u2009. Adhesive bonded GRPCommercial Commercial\u2003\u2003\u2003.\u2009.\u2009. Used withBronzeASTM ASTM \u2003\u2003\u2003.\u2009.\u2009.\u2003gasketed\u2003 or \u2003mechanicalCNAASTM ASTM \u2003\u2003\u2003.\u2009.\u2009. \u2003couplings\u2003 or ButtweldCP TitaniumASTM \/ ASME SB363ASME B16.9Elbows, Tees, Caps,1, 2, 3, 4, 7, 12MSS SP-43& Reducers(Dimensions only)Socket-Welding orCP TitaniumASTM \/ ASME SB381ASME B16.11Threaded Elbows, Tees1, 2, 3, 4, 7, 12MSS SP-97Couplings, Bushings(Dimensions only)PlugsCP TitaniumASTM \/ ASME SB381ASME B16.11MSS SP-97(Dimensions only)UnionsCP TitaniumASTM \/ ASME SB381MSS SP-83(Dimensions only)NipplesCP TitaniumASTM \/ ASME SB861MSS SP-83ASTM \/ ASME SB862(Dimensions only)Belled End Socket-CP TitaniumASTM \/ ASME SB363MSS SP-119Welding Elbows, Tees,(Dimensions only)Couplings, Reducers,CapsThreaded, Socket-CP TitaniumASTM \/ ASME SB381MSS SP-97Welding, and(Dimensions only)Buttwelding OutletsValves Butterfly water or lug Ductile ironASTM MSS-SP-67Trim group 6Carbon steelASTM GR\u2003WCB or Butterfly groovedBronzeASTM \u2003\u2003\u2003.\u2009.\u2009.Trim group 4\u2003end\u2003or Valves: gate, globe,FlangedBronze ASME SB61 or SB62 MSS-SP-80Trim group 6\u2003angle, check BrazedWhen combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. CNA\u2014copper nickel alloy. FGP\u2014fiberglass pipe. GR\u2014grade. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. Acceptable when gasket isolates coupling housings from fluid.Not permitted with CNA piping. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style MaterialMaterial SpecificationDesign Specification Maximum Temperature 200\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRBASME B36.10.\u2009.\u2009. \u2003resistance welded \u2003or \u2003GR B TYS or E Takedown joints Flanges: socket weld or\u2003 slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or \u2003threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts Carbon steel ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9.\u2009.\u2009. \u2003or B16.28Socket weld Carbon steel ASTM GR WPBASME B16.11.\u2009.\u2009. \u2003or Sleeve coupling Carbon steel ASTM GR WPB ASTM .\u2009.\u2009. Threaded BronzeASME SB61 or SB62 ASME B16.15.\u2009.\u2009. Used with\u2003Gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.Valves Butterfly wafer or lug type Ductile ironASTM MSS-SP-67.\u2009.\u2009. Butterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe,FlangedDuctile ironASTM ASME B16.34Trim group 4\u2003angle, check Flanged or buttweld Carbon steel ASTM GR WCBTrim group 3\u2003or Socket weld Carbon steel ASTM GR WPBASME B16.34.\u2009.\u2009. \u2003or Flanged or threaded BronzeASME SB61 or SB62 MSS-SP-80.\u2009.\u2009. Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style MaterialMaterial SpecificationDesign Specification Maximum Temperature 100\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRB ASME B36.10.\u2009.\u2009. \u2003 resistance weld \u2003or \u2003GR B TYS or E Filament wound FGPASTM GR 1 CommercialSee NVIC 11-86Centrifugally cast FGPASTM GR 1 CommercialSee NVIC 11-86Seamless or electricCP TitaniumASTM \/ ASME SB861Resistance weldedGrade 2ASTM \/ ASME SB862Takedown joints Flanges: slip-on or socket\u2003 weldCarbon steel ASTM ASME B16.5.\u2009.\u2009. Flanges: plateSteel with NCAfacing ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or\u2003 threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Flanges: adhesive bonded GRPASTM GR 1 ASTM .\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM .\u2009.\u2009. Flanges:CP TitaniumASTM \/ ASME SB381ASME B16.5Blind, Weld Neck(Dimensions only)Slip-On, Threaded PipeFigure 8 BlanksCP TitaniumASME B16.5ASME B16.48(Dimensions only)Spectacle BlindsCP TitaniumPipe Fitters Bluebook(Dimensions only)Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts Carbon steel ASTM GR A ASME B18.2.2.\u2009.\u2009. Bolts\/Bolt StudsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381NutsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381WashersCP TitaniumASTM \/ ASME SB2651, 2, 3, 4, 7, 11, 12Per Request only:Bolts\/Bolt StudsCP TitaniumASTM (Bolts)2, 3, 4, 7, 12NutsCP TitaniumASTM (Nuts)2, 3, 4, 7, 12Plain Washers &CP TitaniumASME B18.21.1Lock Washers1, 2, 3, 4, 7, 12ASME B18.22.1Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or\u2003B16.28.\u2009.\u2009. Socket weld or threaded Carbon steel ASTM GR WPBASME B16.11.\u2009.\u2009. \u2003or Sleeve coupling Carbon steel ASTM GR WPB ASTM .\u2009.\u2009. Adhesive bonded GRPCommercial Commercial.\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.ButtweldCP TitaniumASTM \/ ASME SB363ASME B16.9Elbows, Tees, Caps, 1, 2, 3, 4, 7, 12MSS SP-43& Reducers(Dimensions only)Socket-Welding or CP TitaniumASTM \/ ASME SB381ASME B16.11Threaded Elbows, Tees 1, 2, 3, 4, 7, 12MSS SP-97Couplings, Bushings (Dimensions only)Plugs CP TitaniumASTM \/ ASME SB381ASME B16.11MSS SP-97(Dimensions only)Unions CP TitaniumASTM \/ ASME SB381MSS SP-83(Dimensions only)NipplesCP TitaniumASTM \/ ASME SB861MSS SP-83ASTM \/ ASME SB862(Dimensions only)Belled End Socket- CP TitaniumASTM \/ ASME SB363MSS SP-119Welding Elbows, Tees, (Dimensions only)Couplings, Reducers,CapsThreaded, Socket- CP TitaniumASTM \/ ASME SB381MSS SP-97Welding, and (Dimensions only)Buttwelding OutletsValves Butterfly wafer or lug type Ductile ironASTM MSS-SP-67.\u2009.\u2009. Carbon steel ASTM GR WCB\u2003or Butterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe,FlangedDuctile ironASTM ASME B16.34Trim group 3 and 4\u2003 angle, check Carbon steelASTM GR WCBASME B16.34Trim group 3 and 4\u2003or Threaded or brazed Bronze ASME SB61 or SB62 MSS-SP-80Trim group 3 and 4Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. NCA\u2014nickel copper alloy. GRP\u2014glass-reinforced plastic. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style MaterialMaterial Specification Design SpecificationMaximum Temperature 200\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRB ASME B36.10.\u2009.\u2009. \u2003 resistance welded \u2003or GR\u2003B TYS or E Filament wound FGPASTM GR 1 CommercialSee NVIC 11-86Centrifugally cast FGPASTM GR 1 CommercialSee NVIC 11-86Takedown joints Flanges: weldneck, \u2003socket weld or slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or \u2003threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Flanges: adhesive bonded GRPASTM GR 1 ASTM .\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009.Nuts Carbon steel ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9.\u2009.\u2009. \u2003or B16.28Socket weld or threaded Carbon steel ASTM GR WPBASME B16.11.\u2009.\u2009.\u2003or Sleeve couplings Carbon steel ASTM GR WPB ASTM .\u2009.\u2009. Adhesive bonded GRPCommercial Commercial.\u2009.\u2009.Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.Valves Butterfly wafer or lug Ductile ironASTM MSS-SP-67Trim group 4 and 5Carbon steel ASTM GR WCB\u2003or Butterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe, FlangedDuctile ironASTM ASME B16.34Trim group 4 and 5\u2003angle, check Carbon steelASTM GR WCB\u2003or Socket weld or threaded Carbon steel ASTM GR WPBASME B16.34Trim group 3\u2003or Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessel in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . Item Type\/Style MaterialMaterial Specification Design Specification Maximum Temperature 300\u00b0FRemarks\/Limitations Pipe Seamless Carbon steel ASTM GRB ASME B36.10.\u2009.\u2009. \u2003or GR \u2003B TYS Takedown joints Flanges: weldneck, \u2003socket weld or slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or\u2003 threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts Carbon steel ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009. Socket weld or threaded Carbon steel ASTM GR WPBASME B16.11.\u2009.\u2009. \u2003or Sleeve couplings Carbon steel ASTM GR WPB ASTM .\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.ValvesButterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe,FlangedDuctile ironASTM ASME B16.34Trim group 4 and 5\u2003angle, check Carbon steelASTM GR WCBTrim group 3\u2003or Buttweld or socket weld Carbon steel ASTM GR WPBASME B16.34.\u2009.\u2009. \u2003or Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. For trim group definition, refer to . Item Type\/Style Material Material Specification Design Specification Maximum Temperature 200\u00b0FRemarks\/Limitations Pipe Seamless or electricCarbon steel ASTM GRB ASME B36.10.\u2009.\u2009. \u2003resistance welded \u2003or GR \u2003B TYS or E Filament wound FGPASTM GR 1 CommercialSee NVIC 11-86Centrifugally cast FGPASTM GR 1 CommercialSee NVIC 11-86Takedown joints Flanges: weld neck, \u2003socket weld, or\u2003threaded Carbon steel ASTM ASME B16.5.\u2009.\u2009.Unions: socket weld Carbon steel ASTM MSS-SP-83.\u2009.\u2009.Flexible couplings Steel with resilient\u2003gasket Commercial Commercial.\u2009.\u2009.Flanges: adhesive\u2003bonded GRPASTM GR 1 ASTM .\u2009.\u2009. Gasketed\u2003mechanical\u2003couplingsDuctile ironASTM ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009.Nuts Carbon steel ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Flanged Ductile iron ASTM ASME B16.42.\u2009.\u2009. Carbon steel ASTM GR WCB ASME B16.5.\u2009.\u2009. Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009.Socket weld Carbon steel ASTM GR WPBASME B16.11.\u2009.\u2009. \u2003or Sleeve coupling Carbon steel ASTM GR WPB ASTM .\u2009.\u2009.Adhesive bonded GRPCommercial Commercial.\u2009.\u2009.Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.Valves Butterfly wafer or lug Ductile ironASTM MSS-SP-67Trim group 4Carbon steel ASTM GR WCBTrim group 3\u2003or Butterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe,Flanged Ductile ironASTM ASME B16.34Trim group 4\u2003angle, check Carbon steel ASTM GR WCBTrim group 3\u2003or Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessel in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . Item Type\/Style Material Material Specification Design SpecificationMaximum Temperature 406\u00b0FRemarks\/Limitations Pipe Seamless Copper ASTM TYK ASTM Must be annealed for \u2003pressures over 225\u2003psig Takedown joints Unions: brazed or \u2003threaded Bronze ASME SB61 or SB62 MIL-F-1183.\u2009.\u2009. Bolting None required Fittings Brazed or threaded Bronze ASME SB61 or SB62 ASME B16.18.\u2009.\u2009. Brazed Copper ASME SB75 ASME B16.22.\u2009.\u2009. Valves: gate, globe, \u2003angle, check Brazed or threaded Bronze ASME SB61 or SB62 MSS-SP-80Trim groupValves: ball Flanged Bronze ASME SB61 or SB62 MSS-SP-72, Trim groupConsult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. TY\u2014type. MSS-SP-80valves limited to 75\u2009% of valve design pressure. For trim group definition, refer to . Item Type\/Style Material Material SpecificationDesign Specification Remarks\/Limitations Pipe Seamless or electric \u2003resistance welded Carbon steel ASTM , ,\u2003, \u2003or ASME B36.10.\u2009.\u2009. CRESASTM \u2003or Takedown joints Flanges: weldneck or\u2003 socket weld Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: flared, flareless,\u2003 compression Carbon steel Commercial Commercial.\u2009.\u2009. Bolting Bolts\/bolt studs CrMosteel ASTM GRB7ASME B18.2.1.\u2009.\u2009. Nuts Carbon steel ASTM GR 2H ASME B18.2.2.\u2009.\u2009. Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009. Socket weld Carbon steel ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009. Flared, flareless, \u2003compression Carbon steel Commercial Commercial.\u2009.\u2009. Valves: gate, globe, \u2003angle, check Flanged or buttweldCarbon steelASTM GR WCB\u2003or ASME B16.34Trim group 2Socket weld Carbon steel ASTM GR WPB\u2003or ASME B16.34.\u2009.\u2009. Flared, flareless,\u2003 compression Carbon steel Commercial Commercial.\u2009.\u2009. Valves: ball Flanged Bronze ASME SB61 or SB62 MSS-SP-72Trim group 3 and 4This table does not apply to packaged hydraulic systems and equipment. For such applications, specific Coast Guard and ABS approval should be obtained. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. CRES\u2014corrosion resistant steel. Specific Coast Guard and ABS approval required. CrMo\u2014chromium-molybdenum. GR\u2014grade. For trim group definition, refer to . Item Type\/Style MaterialMaterial SpecificationDesign SpecificationMaximum Temperature AmbientRemarks\/Limitations Pipe SeamlessCarbon steelASTM GRBASME B36.10.\u2009.\u2009.SeamlessCopperASTM TYKASTM .\u2009.\u2009.Filament woundFGPASTM GR 1CommercialSee NVIC 11-86Centrifugally cast FGPASTM GR 1 CommercialSee NVIC 11-86Takedown joints Flanges: socket weld or \u2003slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or\u2003threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Unions: brazed Bronze ASME SB61 or SB62 MIL-F-1183.\u2009.\u2009. Flanges: adhesive bonded GRPASTM GR 1 ASTM .\u2009.\u2009. Gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009. Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Flanged Carbon steel ASTM GR WCB\u2003or ASME B16.34.\u2009.\u2009. Buttweld ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009. Socketweld ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009. Brazed Bronze ASME SB61 or SB62 MIL-F-1183.\u2009.\u2009. Adhesive bonded GRPCommercialCommercial.\u2009.\u2009. Sleeve coupling Carbon steel ASTM GR WPB ASTM .\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009. ValvesButterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe, Flanged Ductile ironASTM ASME B16.34Trim group 4\u2003angle, check Carbon steel ASTM GR WCB\u2003or Trim group 3Socket weld Carbon steel ASTM GR WPB\u2003or ASME B16.34Trim group 3Brazed or threaded Bronze ASME SB61 or SB62 MSS-SP-80Trim group 4Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4Valves: ball Flanged Bronze ASME SB61 or SB62 MSS-SP-72Trim group 4When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style Material Material Specification Design Specification Maximum Temperature AmbientRemarks\/Limitations Pipe Seamless or electric \u2003resistance welded Carbon steel ASTM GRB\u2003or \u2003GR B TY S or E ASME B36.10ASTM GR B TYE limited to a design pressure of 350 psig Takedown joints Flanges: weld neck, \u2003socket weld, or slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or \u2003threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Gasketed \u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009. Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Flanged Carbon steel ASTM GR \u2003WCB or ASME B16.5.\u2009.\u2009. Buttweld ASTM GR\u2003WPB ASME B16.9or B16.28.\u2009.\u2009. Socket weld or threaded ASTM GR\u2003WPB or ASME B16.11.\u2009.\u2009. Sleeve coupling ASTM GR\u2003WPB ASTM .\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009. ValvesButterfly grooved \u2003endDuctile ironASTM Trim group 4Valves: gate, globe,\u2003 angle, check FlangedCarbon steel ASTM GR \u2003WCB or ASME B16.34Trim group 3Socket weld or threaded ASTM GR \u2003WPB or ASME B16.34.\u2009.\u2009. Grooved endDuctile ironASTM \u2003\u2003.\u2009.\u2009.Trim group 3 and 4Valves: ball Flanged or buttweld Carbon steel ASTM GR \u2003WCB or \u2003or MSS-SP-72Trim group 3Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. For trim group definition, refer to . Item Type\/Style Material Material Specification Design Specification Maximum Temperature 406\u00b0FRemarks\/Limitations Pipe Seamless Copper ASTM TYK or L or\u2003ASME SB75 ASTM or ASME SB75 Must be annealed for\u2003pressures over 225\u2003psig Takedown joints None Bolting None Fittings Brazed Copper ASTM TY K or L or\u2003ASME SB75 ASME B16.22.\u2009.\u2009.Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. TY\u2014type. Item Type\/Style Material Material Specification Design Specification Maximum Temperature 850\u00b0FRemarks\/Limitations Pipe Seamless or electric\u2003 resistance welded Carbon steel ASTM GRB or\u2003GR B TYS ASME B36.10See . Must be internally and externally protected from corrosion.CO2piping requires 6000-psig burst rating. Takedown joints Flanges: buttweld or\u2003 socketweld Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld or\u2003 threaded Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Bolting Bolts\/bolt studs CrMosteel ASTM GR B7ASME B18.2.1.\u2009.\u2009. Nuts Carbon steel ASTM GR 2H ASME B18.2.2.\u2009.\u2009. Fittings Buttweld, socketweld or \u2003threaded Carbon steel ASTM GR WPB\u2003ASME B16.9or B16.28.\u2009.\u2009. Valves: gate, globe, \u2003angle, check Flanged or buttweldCarbon steel ASTM GR WCB\u2003or ASME B16.34Trim group 2Socket weld or threaded ASTM GR WPB\u2003or ASME B16.34.\u2009.\u2009. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014Grade. TY\u2014type. CrMo\u2014chromium-molybdenum. For trim group definition, refer to . Item Type\/Style Material Material SpecificationDesign Specification Maximum Temperature 406\u00b0FRemarks\/Limitations Pipe Seamless or electric\u2003 resistance welded Carbon steel ASTM GRB \u2003or GR \u2003B TYS or E ASME B16.10.\u2009.\u2009.Filament woundFGPASTM GR 1CommercialSee and NVICCentrifugally cast FGPASTM GR 1 Commercial11-86Takedown joints Flanges: socket weld \u2003or slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009.Unions: socket weld Carbon steel ASTM MSS-SP-83.\u2009.\u2009.Flanges: adhesive\u2003 bonded GRPASTM GR 1 ASTM .\u2009.\u2009.Gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009.Nuts ASTM GR A ASME B18.2.2.\u2009.\u2009.Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009.Socket weld or\u2003threaded ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009.Sleeve couplings ASTM GR WPB ASTM .\u2009.\u2009.Adhesive bonded GRPCommercial Commercial.\u2009.\u2009.Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.ValvesButterfly grooved \u2003endDuctile ironASTM Trim group 4Valves: gate, globe, \u2003angle, check FlangedDuctile iron ASTM \u2003or ASME B16.34Trim group 4Socket weld ASTM GR WPB\u2003or Trim group 3Brazed or threaded Bronze ASME SB61 or SB62 MSS-SP-80Trim group 4Grooved endDuctile ironASTM Trim group 3 and 4When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style Material Material SpecificationDesign Specification Maximum Temperature 240\u00b0FRemarks\/Limitations Pipe Seamless or electric \u2003resistance welded Carbon steel ASTM GRB \u2003or TYS or E ASME B36.10.\u2009.\u2009.Filament woundFGPASTM GR 1CommercialSee and NVIC Centrifugally cast FGPASTM \u2003or GR 1 Commercial11-86FGP not \u2003permitted outboard \u2003of shell valve. Takedown joints Flanges: socket weld or \u2003threaded Carbon steel ASTM ASME B16.5.\u2009.\u2009.Unions: socket weld or \u2003threaded MSS-SP-83.\u2009.\u2009.Flanges: adhesive\u2003 bonded GRPASTM GR 1 ASTM .\u2009.\u2009.Gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009.Nuts ASTM ASME B18.2.2.\u2009.\u2009.Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009.Socket weld or threaded ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009.Adhesive bonded GRPCommercial Commercial.\u2009.\u2009.Sleeve coupling Carbon steel ASTM ASTM .\u2009.\u2009.Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009.ValvesButterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: gate, globe,Flanged Ductile ironASTM ASME B16.34Trim group 4\u2003angle, check Carbon steel ASTM GR WCB\u2003or Trim group 3Brazed or threaded Bronze ASME SB61 or SB62 ASME B16.24MSS-SP-80Trim group 4Grooved endDuctile ironASTM Trim group 4Valves: ball Flanged Ductile ironASTM MSS-SP-72Trim group 4Bronze ASME SB61 or SB62 When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style Material Material Specification Design Specification Maximum Temperature AmbientRemarks\/Limitations Pipe Seamless or electric \u2003resistance welded Carbon steel ASTM GRB \u2003or GR \u2003B TYS or E ASME B36.10.\u2009.\u2009. Seamless or electricCP TitaniumASTM \/ ASME SB861Resistance weldedGrade 2ASTM \/ ASME SB862Takedown joints Flanges: socketweld or \u2003slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Unions: socket weld Carbon steel ASTM MSS-SP-83.\u2009.\u2009. Gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009. Flanges: CP TitaniumASTM \/ ASME SB381ASME B16.5Blind, Weld Neck(Dimensions only)Slip-On, Threaded PipeFigure 8 BlanksCP TitaniumASME B16.5ASME B16.48(Dimensions only)Spectacle BlindsCP TitaniumPipe Fitters Bluebook(Dimensions only)Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts ASTM GR A ASME B18.2.2.\u2009.\u2009. Bolts\/Bolt StudsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381NutsCP TitaniumASTM \/ ASME SB3482, 3, 4, 7, 12ASTM \/ ASME SB381WashersCP TitaniumASTM \/ ASME SB2651, 2, 3, 4, 7, 11, 12Per Request only:Bolts\/Bolt StudsCP TitaniumASTM (Bolts)2, 3, 4, 7, 12NutsCP TitaniumASTM (Nuts)2, 3, 4, 7, 12Plain Washers &CP TitaniumASME B18.21.1Lock Washers1, 2, 3, 4, 7, 12ASME B18.22.1Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009. Socket weld ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009. Sleeve couplings ASTM GR WPB ASTM .\u2009.\u2009. Used with\u2003gasketed\u2003mechanical\u2003couplings Ductile ironASTM ASTM .\u2009.\u2009. ButtweldCP TitaniumASTM \/ ASME SB363ASME B16.9Elbows, Tees, Caps,1, 2, 3, 4, 7, 12MSS SP-43& Reducers(Dimensions only)Socket-Welding orCP TitaniumASTM \/ ASME SB381ASME B16.11Threaded Elbows, Tees1, 2, 3, 4, 7, 12MSS SP-97Couplings, Bushings(Dimensions only)Plugs CP TitaniumASTM \/ ASME SB381ASME B16.11MSS SP-97(Dimensions only)Unions CP TitaniumASTM \/ ASME SB381MSS SP-83(Dimensions only)NipplesCP TitaniumASTM \/ ASME SB861MSS SP-83ASTM \/ ASME SB862(Dimensions only)Belled End Socket-CP TitaniumASTM \/ ASME SB363MSS SP-119Welding Elbows, Tees,(Dimensions only)Couplings, Reducers,CapsThreaded, Socket-CP TitaniumASTM \/ ASME SB381MSS SP-97Welding, and(Dimensions only)Buttwelding OutletsValvesButterfly grooved \u2003endDuctile ironASTM .\u2009.\u2009.Trim group 4Valves: check Flanged Ductile ironASTM ASME B16.34Trim group 4Carbon steel ASTM GR WCB\u2003or Trim group 3Grooved endDuctile ironASTM .\u2009.\u2009.Trim group 3 and 4Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. For trim group definition, refer to . Item Type\/Style Material \u2003\u2003Material Specification Design Specification Maximum Temperature 840\u00b0FRemarks\/Limitations Pipe Fabricated duct Alloy steel ASTM TY1 Commercial.\u2009.\u2009. Takedown joints Flanges: welded Alloy steel ASTM TY 1 Commercial.\u2009.\u2009. Bolting Bolts CrMoVsteel ASTM GRB16ASME B18.2.1.\u2009.\u2009. Nuts CMosteel ASTM GR 4 ASME B18.2.2.\u2009.\u2009. Fittings Fabricated duct Alloy steel ASTM TY 1 Commercial.\u2009.\u2009. Valves Sliding gate Carbon steel CommercialCommercialTrim group 3Valves Butterfly wafer or lug Ductile iron ASTM MSS-SP-67Trim group 3Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. TY\u2014type. Specific Coast Guard and ABS approval required. CrMoV\u2014chromium-molybdenum-vanadium. GR\u2014grade. CMo\u2014carbon-molybdenum. For trim group definition, refer to . Item Type\/Style Material Material SpecificationDesign Specification Maximum Temperature 406\u00b0FRemarks\/Limitations Pipe Electric resistance welded Carbon steel ASTM GR285C \u2003or GR B ASME B36.10.\u2009.\u2009.Seamless or electric \u2003resistance welded ASTM GR B \u2003or GR \u2003B TYS or E Filament woundFGPASTM GR 1 CommercialSee and NVIC Centrifugally cast FGPASTM GR 1Commercial11-86Takedown joints Flanges: weldneck socket \u2003weld or slip-on Carbon steel ASTM \u2003or CL 60 ASME B16.5.\u2009.\u2009.Flexible couplings Steel with resilient\u2003gaskets Commercial Commercial.\u2009.\u2009.Flanges: adhesive bonded GRPASTM GR 1 ASTM .\u2009.\u2009.Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009.Nuts ASTM GR A ASME B18.2.2.\u2009.\u2009.Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009.Socketweld or threaded ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009.Sleeve couplings ASTM GR WPB ASTM .\u2009.\u2009.Adhesive bonded GRPCommercial Commercial.\u2009.\u2009.Valves Butterfly wafer or lug Ductile ironASTM MSS-SP-67Trim group 8Carbon steel ASTM GR WCB\u2003or Trim group 3Valves: gate, globe,Flanged Ductile ironASTM ASME B16.34Trim group 8\u2003angle, check Carbon steel ASTM GR WCB\u2003or Trim group 3Flanged, brazed, or \u2003threaded Bronze ASME SB61 or SB62 MSS-SP-80Trim group 8When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. FGP\u2014fiberglass pipe. Specific Coast Guard and ABS approval required. For U.S. flag vessels in addition to classification society requirements. GRP\u2014glass reinforced plastic. For trim group definition, refer to . MSS-SP-80valves limited to 75\u2009% of valve design pressure. Item Type\/Style Material Material Specification Design Specification Minimum Temperature 0\u00b0FRemarks\/Limitations Pipe Seamless or electric \u2003resistance welded Carbon steel ASTM GRB \u2003or GR \u2003B TYS or E ASME B36.10.\u2009.\u2009. Takedown joints Flanges: weld neck, \u2003socket weld or slip-on Carbon steel ASTM ASME B16.5.\u2009.\u2009. Bolting Bolts\/bolt studs Carbon steel ASTM GR B ASME B18.2.1.\u2009.\u2009. Nuts ASTM GR A ASME B18.2.2.\u2009.\u2009. Fittings Buttweld Carbon steel ASTM GR WPB ASME B16.9or B16.28.\u2009.\u2009. Socket weld ASTM GR WPB\u2003or ASME B16.11.\u2009.\u2009. Sleeve coupling ASTM GR WPB ASTM .\u2009.\u2009. Valves Butterfly wafer or lug Carbon steel ASTM GR WCB\u2003or MSS-SP-67.\u2009.\u2009. Valves: gate, globe, \u2003angle, check Flanged or buttweldCarbon steel ASTM GR WCB\u2003or ASME B16.34Trim group 3Socket weld ASTM GR WPB\u2003or ASME B16.34.\u2009.\u2009.Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. GR\u2014grade. TY\u2014type. For trim group definition, refer to . Item Type\/Style Material Material Specification Design Specification Minimum Temperature \u2212325\u00b0FRemarks\/Limitations Pipe Seamless or electric \u2003resistance welded CRESASME SA312 TP316L or 304L \u2003ASME B36.19.\u2009.\u2009. Takedown joints Flanges: weld neck or \u2003socket weld CRESASTM GR316L \u2003ASME B16.5.\u2009.\u2009. Bolting Bolts\/bolt studs CRESASTM GR B8T, B8F, \u2003B8M, or B8C\u2003ASME B18.2.1.\u2009.\u2009.Nuts ASTM GR 8, 8C,\u20038F, or 8T \u2003ASME B18.2.2.\u2009.\u2009.Fittings Buttweld CRESASTM GR 316L \u2003or 304L; or \u2003GR CF3M \u2003ASME B16.9or B16.28.\u2009.\u2009.Socket weld ASTM GR 316L \u2003or 304L; or \u2003GR CF3M \u2003ASME B16.11.\u2009.\u2009.Valves Butterfly wafer or lug CRESASTM GR 316L or \u2003304L; or \u2003GR CF3M \u2003MSS-SP-67Trim group 7Valves: gate, \u2003globe, angle, \u2003check Flanged, buttweld, or \u2003socket weld CRESASTM GR 316L \u2003or 304L; or \u2003GR CF3M \u2003ASME B16.34Trim group 7Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. CRES\u2014corrosion resistant steel. TP\u2014tubular product. GR\u2014grade. For trim group definition, refer to . Group Trim Material Material SpecificationRemarks\/Limitations 1 Stem CRESASTM GRF6a.\u2009.\u2009.Wedge\/disk CrMoASTM GR F11 Seat ring CrMo ASTM GR F11 or ASME \u2003SA217 GR WC6 hard-faced seat Seat, integral Same as valve body 2 Stem, wedge\/disk or seat ring CRES ASTM GR F6ahard-faced seat Integral seats Same as valve body 3 Stem, wedge\/disk or seat ring CRES ASTM GR F6ahard-faced seat optional Seat integral Same as valve body 4 Stem, wedge\/disc or seating Bronze ASME SB61 or SB62 .\u2009.\u2009.Seat integral Same as valve body 5 Stem, wedge\/disk or seat ring CRES ASTM GR F6a.\u2009.\u2009.Seat integral Same as valve body 6 Stem, wedge\/disk or seat ring NCAASTM .\u2009.\u2009.7 Stem, wedge\/disk or seat ring CRES ASTM GR F304L\u2003or F316L or \u2003GR CF3M hard-faced seat optional 8 Stem CRES ASTM GR F6a.\u2009.\u2009.Wedge\/disk or seat ring Bronze ASME SB61 or SB62 .\u2009.\u2009.Integral seat Same as valve body .\u2009.\u2009..\u2009.\u2009.Consult applicable material and design specifications, and where indicated, to establish pressure\/temperature ratings. When combining dissimilar materials, galvanic corrosion can occur, especially in seawater systems, and should be considered. CRES\u2014corrosion resistant steel. GR\u2014grade. CrMo\u2014chromium-molybdenum. NCA\u2014nickel copper alloy.Discontinued. ;<\/p>\n

ICS Code<\/strong><\/p>\n

ICS Number Code 23.040.01 (Pipeline components in general. Pipelines)<\/p>\n

DOI:<\/strong> 10.1520\/F1155-10R24<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

F1155-10(2024) Standard Practice for Selection and Application of Piping System Materials<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
ASTM<\/b><\/a><\/td>\n2024<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":464563,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[343,2637],"product_tag":[],"class_list":{"0":"post-464553","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-23-040-01","7":"product_cat-astm","9":"first","10":"instock","11":"sold-individually","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/464553","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/464563"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=464553"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=464553"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=464553"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}